[U-Boot] [PATCH V2] ARMV7: Add support for TRATS board
HeungJun, Kim
riverful.kim at samsung.com
Fri Jan 6 13:55:22 CET 2012
This patch adds support for Samsung TRATS board
Signed-off-by: HeungJun, Kim <riverful.kim at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---
MAINTAINERS | 4 +
board/samsung/trats/Makefile | 45 ++
board/samsung/trats/lowlevel_init.S | 50 +++
board/samsung/trats/lowlevel_util.c | 137 ++++++
board/samsung/trats/trats.c | 250 +++++++++++
board/samsung/trats/trats_setup.h | 812 +++++++++++++++++++++++++++++++++++
boards.cfg | 1 +
include/configs/trats.h | 216 ++++++++++
8 files changed, 1515 insertions(+), 0 deletions(-)
create mode 100644 board/samsung/trats/Makefile
create mode 100644 board/samsung/trats/lowlevel_init.S
create mode 100644 board/samsung/trats/lowlevel_util.c
create mode 100644 board/samsung/trats/trats.c
create mode 100644 board/samsung/trats/trats_setup.h
create mode 100644 include/configs/trats.h
diff --git a/MAINTAINERS b/MAINTAINERS
index a56ca10..b760e7f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -705,6 +705,10 @@ Chander Kashyap <k.chander at samsung.com>
origen ARM ARMV7 (EXYNOS4210 SoC)
SMDKV310 ARM ARMV7 (EXYNOS4210 SoC)
+Heungjun Kim <riverful.kim at samsung.com>
+
+ trats ARM ARMV7 (EXYNOS4210 SoC)
+
Torsten Koschorrek <koschorrek at synertronixx.de>
scb9328 ARM920T (i.MXL)
diff --git a/board/samsung/trats/Makefile b/board/samsung/trats/Makefile
new file mode 100644
index 0000000..77bd4a8
--- /dev/null
+++ b/board/samsung/trats/Makefile
@@ -0,0 +1,45 @@
+#
+# Copyright (C) 2011 Samsung Electronics
+# Heungjun Kim <riverful.kim at samsung.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS-y := trats.o lowlevel_util.o
+SOBJS := lowlevel_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(SOBJS) $(OBJS)
+ $(call cmd_link_o_target, $(SOBJS) $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/samsung/trats/lowlevel_init.S b/board/samsung/trats/lowlevel_init.S
new file mode 100644
index 0000000..9159063
--- /dev/null
+++ b/board/samsung/trats/lowlevel_init.S
@@ -0,0 +1,50 @@
+/*
+ * Lowlevel setup for TRATS board based on EXYNOS4210
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ * Heungjun Kim <riverful.kim at samsung.com>
+ * Kyungmin Park <kyungmin.park at samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+#include "trats_setup.h"
+
+ .globl pmu_init
+ .globl uart_init
+ .globl watchdog_disable
+ .globl clock_init
+ .globl pmic_reset
+
+ .globl lowlevel_init
+lowlevel_init:
+ push {lr}
+
+ bl pmic_reset @ PMIC reset
+ bl clock_init @ Init Clock
+ bl watchdog_disable @ Disable Watchdog
+ bl uart_init @ Init UART
+ bl pmu_init @ Init PMU
+
+ pop {pc}
+ nop
diff --git a/board/samsung/trats/lowlevel_util.c b/board/samsung/trats/lowlevel_util.c
new file mode 100644
index 0000000..d67a095
--- /dev/null
+++ b/board/samsung/trats/lowlevel_util.c
@@ -0,0 +1,137 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ * Heungjun Kim <riverful.kim at samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include "trats_setup.h"
+
+void pmic_reset(void)
+{
+ u32 base = EXYNOS4_GPIO_PART2_BASE;
+ u32 gpio;
+
+ gpio = readl(base + EXYNOS4_GPIO_X2_CON_OFFSET);
+ gpio &= ~EXYNOS4_GPIO_X2_CON_MASK;
+ gpio |= EXYNOS4_GPIO_X2_CON_VAL;
+ writel(EXYNOS4_GPIO_X2_CON_VAL, base + EXYNOS4_GPIO_X2_CON_OFFSET);
+
+ gpio = readl(base + EXYNOS4_GPIO_X2_DAT_OFFSET);
+ gpio |= EXYNOS4_GPIO_X2_DAT_VAL;
+ writel(gpio, base + EXYNOS4_GPIO_X2_DAT_OFFSET);
+}
+
+void clock_init(void)
+{
+ u32 base = EXYNOS4_CLOCK_BASE;
+
+ writel(CLK_SRC_CPU_VAL, base + CLK_SRC_CPU_OFFSET);
+ writel(CLK_DIV_CPU0_VAL, base + CLK_DIV_CPU0_OFFSET);
+ writel(CLK_DIV_CPU1_VAL, base + CLK_DIV_CPU1_OFFSET);
+ writel(CLK_DIV_DMC0_VAL, base + CLK_DIV_DMC0_OFFSET);
+ writel(CLK_DIV_DMC1_VAL, base + CLK_DIV_DMC1_OFFSET);
+
+ writel(CLK_SRC_TOP0_VAL, base + CLK_SRC_TOP0_OFFSET);
+ writel(CLK_SRC_FSYS_VAL, base + CLK_SRC_FSYS_OFFSET);
+ writel(CLK_SRC_PERIL0_VAL, base + CLK_SRC_PERIL0_OFFSET);
+
+ writel(CLK_DIV_LEFTBUS_VAL, base + CLK_DIV_LEFTBUS_OFFSET);
+ writel(CLK_DIV_RIGHTBUS_VAL, base + CLK_DIV_RIGHTBUS_OFFSET);
+ writel(CLK_DIV_TOP_VAL, base + CLK_DIV_TOP_OFFSET);
+ writel(CLK_DIV_FSYS1_VAL, base + CLK_DIV_FSYS1_OFFSET);
+ writel(CLK_DIV_FSYS2_VAL, base + CLK_DIV_FSYS2_OFFSET);
+ writel(CLK_DIV_FSYS3_VAL, base + CLK_DIV_FSYS3_OFFSET);
+ writel(CLK_DIV_PERIL0_VAL, base + CLK_DIV_PERIL0_OFFSET);
+
+ /* PLL Setting */
+ writel(PLL_LOCKTIME, base + APLL_LOCK_OFFSET);
+ writel(PLL_LOCKTIME, base + MPLL_LOCK_OFFSET);
+ writel(PLL_LOCKTIME, base + EPLL_LOCK_OFFSET);
+ writel(PLL_LOCKTIME, base + VPLL_LOCK_OFFSET);
+ writel(APLL_CON1_VAL, base + APLL_CON1_OFFSET);
+ writel(APLL_CON0_VAL, base + APLL_CON0_OFFSET);
+ writel(MPLL_CON1_VAL, base + MPLL_CON1_OFFSET);
+ writel(MPLL_CON0_VAL, base + MPLL_CON0_OFFSET);
+ writel(EPLL_CON1_VAL, base + EPLL_CON1_OFFSET);
+ writel(EPLL_CON0_VAL, base + EPLL_CON0_OFFSET);
+ writel(VPLL_CON1_VAL, base + VPLL_CON1_OFFSET);
+ writel(VPLL_CON0_VAL, base + VPLL_CON0_OFFSET);
+
+ /* Clock Gating */
+ writel(CLK_GATE_IP_CAM_VAL, base + CLK_GATE_IP_CAM_OFFSET);
+ writel(CLK_GATE_IP_VP_VAL, base + CLK_GATE_IP_VP_OFFSET);
+ writel(CLK_GATE_IP_MFC_VAL, base + CLK_GATE_IP_MFC_OFFSET);
+ writel(CLK_GATE_IP_G3D_VAL, base + CLK_GATE_IP_G3D_OFFSET);
+ writel(CLK_GATE_IP_IMAGE_VAL, base + CLK_GATE_IP_IMAGE_OFFSET);
+ writel(CLK_GATE_IP_LCD0_VAL, base + CLK_GATE_IP_LCD0_OFFSET);
+ writel(CLK_GATE_IP_LCD1_VAL, base + CLK_GATE_IP_LCD1_OFFSET);
+ writel(CLK_GATE_IP_FSYS_VAL, base + CLK_GATE_IP_FSYS_OFFSET);
+ writel(CLK_GATE_IP_GPS_VAL, base + CLK_GATE_IP_GPS_OFFSET);
+ writel(CLK_GATE_IP_PERIL_VAL, base + CLK_GATE_IP_PERIL_OFFSET);
+ writel(CLK_GATE_IP_PERIR_VAL, base + CLK_GATE_IP_PERIR_OFFSET);
+ writel(CLK_GATE_BLOCK_VAL, base + CLK_GATE_BLOCK_OFFSET);
+}
+
+void watchdog_disable(void)
+{
+ u32 base = EXYNOS4_WATCHDOG_BASE;
+ writel(0, base);
+}
+
+void uart_init(void)
+{
+ u32 base = EXYNOS4_GPIO_PART1_BASE;
+
+ writel(EXYNOS4_GPIO_A0_CON_VAL, base + EXYNOS4_GPIO_A0_CON_OFFSET);
+ writel(EXYNOS4_GPIO_A1_CON_VAL, base + EXYNOS4_GPIO_A1_CON_OFFSET);
+
+ /* UART_SEL */
+ base = EXYNOS4_GPIO_PART2_BASE;
+ writel(EXYNOS4_GPIO_Y4_CON_VAL, base + EXYNOS4_GPIO_Y4_CON_OFFSET);
+ writel(EXYNOS4_GPIO_Y4_PUD_VAL, base + EXYNOS4_GPIO_Y4_PUD_OFFSET);
+ writel(EXYNOS4_GPIO_Y4_DAT_VAL, base + EXYNOS4_GPIO_Y4_DAT_OFFSET);
+
+ base = EXYNOS4_UART_BASE;
+ base += EXYNOS4_DEFAULT_UART_OFFSET;
+ writel(ULCON_VAL, base + ULCON_OFFSET);
+ writel(UCON_VAL, base + UCON_OFFSET);
+ writel(UFCON_VAL, base + UFCON_OFFSET);
+ writel(UBRDIV_VAL, base + UBRDIV_OFFSET);
+ writel(UFRACVAL_VAL, base + UFRACVAL_OFFSET);
+}
+
+void pmu_init(void)
+{
+ u32 base = EXYNOS4_POWER_BASE;
+
+ /* PS HOLD */
+ base += EXYNOS4_PS_HOLD_CON_OFFSET;
+ writel(EXYNOS4_PS_HOLD_CON_VAL, base);
+
+ /* Set power down */
+ base += POWER_DOWN_OFFSET;
+ writel(0, base + POWER_TV_CONFIGURATION_OFFSET);
+ writel(0, base + POWER_MFC_CONFIGURATION_OFFSET);
+ writel(0, base + POWER_G3D_CONFIGURATION_OFFSET);
+ writel(0, base + POWER_LCD_CONFIGURATION_OFFSET);
+ writel(0, base + POWER_GPS_CONFIGURATION_OFFSET);
+}
diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
new file mode 100644
index 0000000..640108d
--- /dev/null
+++ b/board/samsung/trats/trats.c
@@ -0,0 +1,250 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ * Heungjun Kim <riverful.kim at samsung.com>
+ * Kyungmin Park <kyungmin.park at samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc.h>
+#include <pmic.h>
+#include <usb/s3c_udc.h>
+#include <asm/arch/cpu.h>
+#include <max8998_pmic.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+unsigned int board_rev;
+
+#ifdef CONFIG_REVISION_TAG
+u32 get_board_rev(void)
+{
+ return board_rev;
+}
+#endif
+
+static void check_hw_revision(void);
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ check_hw_revision();
+ printf("HW Revision:\t0x%x\n", board_rev);
+
+#if defined(CONFIG_PMIC)
+ pmic_init();
+#endif
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) +
+ get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
+
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+}
+
+static unsigned int get_hw_revision(void)
+{
+ struct exynos4_gpio_part1 *gpio;
+ int hwrev = 0;
+ int i;
+
+ gpio = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE;
+
+ /* hw_rev[3:0] == GPE1[3:0] */
+ for (i = 0; i < 4; i++) {
+ s5p_gpio_cfg_pin(&gpio->e1, i, GPIO_INPUT);
+ s5p_gpio_set_pull(&gpio->e1, i, GPIO_PULL_NONE);
+ }
+
+ udelay(1);
+
+ for (i = 0; i < 4; i++)
+ hwrev |= (s5p_gpio_get_value(&gpio->e1, i) << i);
+
+ debug("hwrev 0x%x\n", hwrev);
+
+ return hwrev;
+}
+
+static void check_hw_revision(void)
+{
+ int hwrev;
+
+ hwrev = get_hw_revision();
+
+ board_rev |= hwrev;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+ puts("Board:\tTRATS\n");
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ struct exynos4_gpio_part2 *gpio;
+ int i, err;
+
+ gpio = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;
+
+ /* eMMC_EN: SD_0_CDn: GPK0[2] Output High */
+ s5p_gpio_direction_output(&gpio->k0, 2, 1);
+ s5p_gpio_set_pull(&gpio->k0, 2, GPIO_PULL_NONE);
+
+ /*
+ * eMMC GPIO:
+ * SDR 8-bit at 48MHz at MMC0
+ * GPK0[0] SD_0_CLK(2)
+ * GPK0[1] SD_0_CMD(2)
+ * GPK0[2] SD_0_CDn -> Not used
+ * GPK0[3:6] SD_0_DATA[0:3](2)
+ * GPK1[3:6] SD_0_DATA[0:3](3)
+ *
+ * DDR 4-bit at 26MHz at MMC4
+ * GPK0[0] SD_4_CLK(3)
+ * GPK0[1] SD_4_CMD(3)
+ * GPK0[2] SD_4_CDn -> Not used
+ * GPK0[3:6] SD_4_DATA[0:3](3)
+ * GPK1[3:6] SD_4_DATA[4:7](4)
+ */
+ for (i = 0; i < 7; i++) {
+ if (i == 2)
+ continue;
+ /* GPK0[0:6] special function 2 */
+ s5p_gpio_cfg_pin(&gpio->k0, i, 0x2);
+ /* GPK0[0:6] pull disable */
+ s5p_gpio_set_pull(&gpio->k0, i, GPIO_PULL_NONE);
+ /* GPK0[0:6] drv 4x */
+ s5p_gpio_set_drv(&gpio->k0, i, GPIO_DRV_4X);
+ }
+
+ for (i = 3; i < 7; i++) {
+ /* GPK1[3:6] special function 3 */
+ s5p_gpio_cfg_pin(&gpio->k1, i, 0x3);
+ /* GPK1[3:6] pull disable */
+ s5p_gpio_set_pull(&gpio->k1, i, GPIO_PULL_NONE);
+ /* GPK1[3:6] drv 4x */
+ s5p_gpio_set_drv(&gpio->k1, i, GPIO_DRV_4X);
+ }
+
+ /*
+ * MMC device init
+ * mmc0 : eMMC (8-bit buswidth)
+ * mmc2 : SD card (4-bit buswidth)
+ */
+ err = s5p_mmc_init(0, 8);
+
+ /* T-flash detect */
+ s5p_gpio_cfg_pin(&gpio->x3, 4, 0xf);
+ s5p_gpio_set_pull(&gpio->x3, 4, GPIO_PULL_UP);
+
+ /*
+ * Check the T-flash detect pin
+ * GPX3[4] T-flash detect pin
+ */
+ if (!s5p_gpio_get_value(&gpio->x3, 4)) {
+ /*
+ * SD card GPIO:
+ * GPK2[0] SD_2_CLK(2)
+ * GPK2[1] SD_2_CMD(2)
+ * GPK2[2] SD_2_CDn -> Not used
+ * GPK2[3:6] SD_2_DATA[0:3](2)
+ */
+ for (i = 0; i < 7; i++) {
+ if (i == 2)
+ continue;
+ /* GPK2[0:6] special function 2 */
+ s5p_gpio_cfg_pin(&gpio->k2, i, 0x2);
+ /* GPK2[0:6] pull disable */
+ s5p_gpio_set_pull(&gpio->k2, i, GPIO_PULL_NONE);
+ /* GPK2[0:6] drv 4x */
+ s5p_gpio_set_drv(&gpio->k2, i, GPIO_DRV_4X);
+ }
+ err = s5p_mmc_init(2, 4);
+ }
+
+ return err;
+
+}
+#endif
+
+#ifdef CONFIG_USB_GADGET
+static int s5pc210_phy_control(int on)
+{
+ int ret = 0;
+ struct pmic *p = get_pmic();
+
+ if (pmic_probe(p))
+ return -1;
+
+ if (on) {
+ ret |= pmic_set_output(p,
+ MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
+ MAX8998_SAFEOUT1, LDO_ON);
+ ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
+ MAX8998_LDO3, LDO_ON);
+ ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
+ MAX8998_LDO8, LDO_ON);
+
+ } else {
+ ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
+ MAX8998_LDO8, LDO_OFF);
+ ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
+ MAX8998_LDO3, LDO_OFF);
+ ret |= pmic_set_output(p,
+ MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
+ MAX8998_SAFEOUT1, LDO_OFF);
+ }
+
+ if (ret) {
+ puts("MAX8998 LDO setting error!\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+struct s3c_plat_otg_data s5pc210_otg_data = {
+ .phy_control = s5pc210_phy_control,
+ .regs_phy = EXYNOS4_USBPHY_BASE,
+ .regs_otg = EXYNOS4_USBOTG_BASE,
+ .usb_phy_ctrl = EXYNOS4_USBPHY_CONTROL,
+ .usb_flags = PHY0_SLEEP,
+};
+#endif
diff --git a/board/samsung/trats/trats_setup.h b/board/samsung/trats/trats_setup.h
new file mode 100644
index 0000000..e51f538
--- /dev/null
+++ b/board/samsung/trats/trats_setup.h
@@ -0,0 +1,812 @@
+/*
+ * Machine Specific Values for TRATS board based on EXYNOS4210
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ * Heungjun Kim <riverful.kim at samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TRATS_SETUP_H
+#define _TRATS_SETUP_H
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+
+/* Offsets of clock registers (sources and dividers) */
+#define CLK_SRC_CPU_OFFSET 0x14200
+#define CLK_DIV_CPU0_OFFSET 0x14500
+#define CLK_DIV_CPU1_OFFSET 0x14504
+
+#define CLK_DIV_DMC0_OFFSET 0x10500
+#define CLK_DIV_DMC1_OFFSET 0x10504
+
+#define CLK_DIV_LEFTBUS_OFFSET 0x4500
+#define CLK_DIV_RIGHTBUS_OFFSET 0x8500
+
+#define CLK_SRC_TOP0_OFFSET 0xC210
+#define CLK_DIV_TOP_OFFSET 0xC510
+
+#define CLK_SRC_FSYS_OFFSET 0xC240
+#define CLK_DIV_FSYS1_OFFSET 0xC544
+#define CLK_DIV_FSYS2_OFFSET 0xC548
+#define CLK_DIV_FSYS3_OFFSET 0xC54C
+
+#define CLK_SRC_PERIL0_OFFSET 0xC250
+#define CLK_DIV_PERIL0_OFFSET 0xC550
+
+#define APLL_LOCK_OFFSET 0x14000
+#define MPLL_LOCK_OFFSET 0x14008
+#define APLL_CON0_OFFSET 0x14100
+#define APLL_CON1_OFFSET 0x14104
+#define MPLL_CON0_OFFSET 0x14108
+#define MPLL_CON1_OFFSET 0x1410C
+
+#define EPLL_LOCK_OFFSET 0xC010
+#define VPLL_LOCK_OFFSET 0xC020
+#define EPLL_CON0_OFFSET 0xC110
+#define EPLL_CON1_OFFSET 0xC114
+#define VPLL_CON0_OFFSET 0xC120
+#define VPLL_CON1_OFFSET 0xC124
+
+#define CLK_GATE_IP_CAM_OFFSET 0xC920
+#define CLK_GATE_IP_VP_OFFSET 0xC924
+#define CLK_GATE_IP_MFC_OFFSET 0xC928
+#define CLK_GATE_IP_G3D_OFFSET 0xC92C
+#define CLK_GATE_IP_IMAGE_OFFSET 0xC930
+#define CLK_GATE_IP_LCD0_OFFSET 0xC934
+#define CLK_GATE_IP_LCD1_OFFSET 0xC938
+#define CLK_GATE_IP_FSYS_OFFSET 0xC940
+#define CLK_GATE_IP_GPS_OFFSET 0xC94C
+#define CLK_GATE_IP_PERIL_OFFSET 0xC950
+#define CLK_GATE_IP_PERIR_OFFSET 0xC960
+#define CLK_GATE_BLOCK_OFFSET 0xC970
+
+#define PS_HOLD_CONTROL_OFFSET 0x330C
+
+#define POWER_DOWN_OFFSET 0x3000
+#define POWER_TV_CONFIGURATION_OFFSET 0xC20
+#define POWER_MFC_CONFIGURATION_OFFSET 0xC40
+#define POWER_G3D_CONFIGURATION_OFFSET 0xC60
+#define POWER_LCD_CONFIGURATION_OFFSET 0xCA0
+#define POWER_GPS_CONFIGURATION_OFFSET 0xCE0
+
+/* CLK_SRC_CPU: APLL(1), MPLL(1), CORE(0), HPM(0) */
+#define MUX_HPM_SEL_MOUTAPLL 0x0
+#define MUX_HPM_SEL_SCLKMPLL 0x1
+#define MUX_CORE_SEL_MOUTAPLL 0x0
+#define MUX_CORE_SEL_SCLKMPLL 0x1
+#define MUX_MPLL_SEL_FILPLL 0x0
+#define MUX_MPLL_SEL_MOUTMPLLFOUT 0x1
+#define MUX_APLL_SEL_FILPLL 0x0
+#define MUX_APLL_SEL_MOUTMPLLFOUT 0x1
+#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL_MOUTAPLL << 20) \
+ | (MUX_CORE_SEL_MOUTAPLL << 16) \
+ | (MUX_MPLL_SEL_MOUTMPLLFOUT << 8)\
+ | (MUX_APLL_SEL_MOUTMPLLFOUT << 0))
+
+/* CLK_DIV_CPU0 */
+#define APLL_RATIO 0x0
+#define PCLK_DBG_RATIO 0x1
+#define ATB_RATIO 0x3
+#define PERIPH_RATIO 0x3
+#define COREM1_RATIO 0x7
+#define COREM0_RATIO 0x3
+#define CORE_RATIO 0x0
+#define CLK_DIV_CPU0_VAL ((APLL_RATIO << 24) \
+ | (PCLK_DBG_RATIO << 20) \
+ | (ATB_RATIO << 16) \
+ | (PERIPH_RATIO << 12) \
+ | (COREM1_RATIO << 8) \
+ | (COREM0_RATIO << 4) \
+ | (CORE_RATIO << 0))
+
+/* CLK_DIV_CPU1 */
+#define HPM_RATIO 0x0
+#define COPY_RATIO 0x3
+#define CLK_DIV_CPU1_VAL ((HPM_RATIO << 4) | (COPY_RATIO))
+
+/* CLK_DIV_DMC0 */
+#define CORE_TIMERS_RATIO 0x1
+#define COPY2_RATIO 0x3
+#define DMCP_RATIO 0x1
+#define DMCD_RATIO 0x1
+#define DMC_RATIO 0x1
+#define DPHY_RATIO 0x1
+#define ACP_PCLK_RATIO 0x1
+#define ACP_RATIO 0x3
+#define CLK_DIV_DMC0_VAL ((CORE_TIMERS_RATIO << 28) \
+ | (COPY2_RATIO << 24) \
+ | (DMCP_RATIO << 20) \
+ | (DMCD_RATIO << 16) \
+ | (DMC_RATIO << 12) \
+ | (DPHY_RATIO << 8) \
+ | (ACP_PCLK_RATIO << 4) \
+ | (ACP_RATIO << 0))
+
+/* CLK_DIV_DMC1 */
+#define DPM_RATIO 0x1
+#define DVSEM_RATIO 0x1
+#define PWI_RATIO 0x1
+#define CLK_DIV_DMC1_VAL ((DPM_RATIO << 24) \
+ | (DVSEM_RATIO << 16) \
+ | (PWI_RATIO << 8))
+
+/* CLK_SRC_TOP0 */
+#define MUX_ONENAND_SEL_ACLK_133 0x0
+#define MUX_ONENAND_SEL_ACLK_160 0x1
+#define MUX_ACLK_133_SEL_SCLKMPLL 0x0
+#define MUX_ACLK_133_SEL_SCLKAPLL 0x1
+#define MUX_ACLK_160_SEL_SCLKMPLL 0x0
+#define MUX_ACLK_160_SEL_SCLKAPLL 0x1
+#define MUX_ACLK_100_SEL_SCLKMPLL 0x0
+#define MUX_ACLK_100_SEL_SCLKAPLL 0x1
+#define MUX_ACLK_200_SEL_SCLKMPLL 0x0
+#define MUX_ACLK_200_SEL_SCLKAPLL 0x1
+#define MUX_VPLL_SEL_FINPLL 0x0
+#define MUX_VPLL_SEL_FOUTVPLL 0x1
+#define MUX_EPLL_SEL_FINPLL 0x0
+#define MUX_EPLL_SEL_FOUTEPLL 0x1
+#define MUX_ONENAND_1_SEL_MOUTONENAND 0x0
+#define MUX_ONENAND_1_SEL_SCLKVPLL 0x1
+#define CLK_SRC_TOP0_VAL ((MUX_ONENAND_SEL_ACLK_160 << 28) \
+ | (MUX_ACLK_133_SEL_SCLKMPLL << 24) \
+ | (MUX_ACLK_160_SEL_SCLKMPLL << 20) \
+ | (MUX_ACLK_100_SEL_SCLKMPLL << 16) \
+ | (MUX_ACLK_200_SEL_SCLKMPLL << 12) \
+ | (MUX_VPLL_SEL_FOUTVPLL << 8) \
+ | (MUX_EPLL_SEL_FOUTEPLL << 4) \
+ | (MUX_ONENAND_1_SEL_MOUTONENAND << 0))
+
+/* CLK_DIV_TOP */
+#define ONENAND_RATIO 0x0
+#define ACLK_133_RATIO 0x5
+#define ACLK_160_RATIO 0x4
+#define ACLK_100_RATIO 0x7
+#define ACLK_200_RATIO 0x3
+#define CLK_DIV_TOP_VAL ((ONENAND_RATIO << 16) \
+ | (ACLK_133_RATIO << 12)\
+ | (ACLK_160_RATIO << 8) \
+ | (ACLK_100_RATIO << 4) \
+ | (ACLK_200_RATIO << 0))
+
+/* CLK_DIV_LEFTBUS */
+#define GPL_RATIO 0x1
+#define GDL_RATIO 0x3
+#define CLK_DIV_LEFTBUS_VAL ((GPL_RATIO << 4) | (GDL_RATIO))
+
+/* CLK_DIV_RIGHTBUS */
+#define GPR_RATIO 0x1
+#define GDR_RATIO 0x3
+#define CLK_DIV_RIGHTBUS_VAL ((GPR_RATIO << 4) | (GDR_RATIO))
+
+/* CLK_SRS_FSYS: 6 = SCLKMPLL */
+#define SATA_SEL_SCLKMPLL 0
+#define SATA_SEL_SCLKAPLL 1
+
+#define MMC_SEL_XXTI 0
+#define MMC_SEL_XUSBXTI 1
+#define MMC_SEL_SCLK_HDMI24M 2
+#define MMC_SEL_SCLK_USBPHY0 3
+#define MMC_SEL_SCLK_USBPHY1 4
+#define MMC_SEL_SCLK_HDMIPHY 5
+#define MMC_SEL_SCLKMPLL 6
+#define MMC_SEL_SCLKEPLL 7
+#define MMC_SEL_SCLKVPLL 8
+
+#define MMCC0_SEL MMC_SEL_SCLKMPLL
+#define MMCC1_SEL MMC_SEL_SCLKMPLL
+#define MMCC2_SEL MMC_SEL_SCLKMPLL
+#define MMCC3_SEL MMC_SEL_SCLKMPLL
+#define MMCC4_SEL MMC_SEL_SCLKMPLL
+#define CLK_SRC_FSYS_VAL ((SATA_SEL_SCLKMPLL << 24) \
+ | (MMCC4_SEL << 16) \
+ | (MMCC3_SEL << 12) \
+ | (MMCC2_SEL << 8) \
+ | (MMCC1_SEL << 4) \
+ | (MMCC0_SEL << 0))
+
+/* SCLK_MMC[0-4] = MOUTMMC[0-4]/(MMC[0-4]_RATIO + 1)/(MMC[0-4]_PRE_RATIO +1) */
+/* CLK_DIV_FSYS1: 800(MPLL) / (15 + 1) */
+#define MMC0_RATIO 0xF
+#define MMC0_PRE_RATIO 0x0
+#define MMC1_RATIO 0xF
+#define MMC1_PRE_RATIO 0x0
+#define CLK_DIV_FSYS1_VAL ((MMC1_PRE_RATIO << 24) \
+ | (MMC1_RATIO << 16) \
+ | (MMC0_PRE_RATIO << 8) \
+ | (MMC0_RATIO << 0))
+
+/* CLK_DIV_FSYS2: 800(MPLL) / (15 + 1) */
+#define MMC2_RATIO 0xF
+#define MMC2_PRE_RATIO 0x0
+#define MMC3_RATIO 0xF
+#define MMC3_PRE_RATIO 0x0
+#define CLK_DIV_FSYS2_VAL ((MMC3_PRE_RATIO << 24) \
+ | (MMC3_RATIO << 16) \
+ | (MMC2_PRE_RATIO << 8) \
+ | (MMC2_RATIO << 0))
+
+/* CLK_DIV_FSYS3: 800(MPLL) / (15 + 1) */
+#define MMC4_RATIO 0xF
+#define MMC4_PRE_RATIO 0x0
+#define CLK_DIV_FSYS3_VAL ((MMC4_PRE_RATIO << 8) \
+ | (MMC4_RATIO << 0))
+
+/* CLK_SRC_PERIL0 */
+#define UART_SEL_XXTI 0
+#define UART_SEL_XUSBXTI 1
+#define UART_SEL_SCLK_HDMI24M 2
+#define UART_SEL_SCLK_USBPHY0 3
+#define UART_SEL_SCLK_USBPHY1 4
+#define UART_SEL_SCLK_HDMIPHY 5
+#define UART_SEL_SCLKMPLL 6
+#define UART_SEL_SCLKEPLL 7
+#define UART_SEL_SCLKVPLL 8
+
+#define UART0_SEL UART_SEL_SCLKMPLL
+#define UART1_SEL UART_SEL_SCLKMPLL
+#define UART2_SEL UART_SEL_SCLKMPLL
+#define UART3_SEL UART_SEL_SCLKMPLL
+#define UART4_SEL UART_SEL_SCLKMPLL
+#define UART5_SEL UART_SEL_SCLKMPLL
+#define CLK_SRC_PERIL0_VAL ((UART5_SEL << 16) \
+ | (UART4_SEL << 12) \
+ | (UART3_SEL << 12) \
+ | (UART2_SEL << 8) \
+ | (UART1_SEL << 4) \
+ | (UART0_SEL << 0))
+
+/* SCLK_UART[0-4] = MOUTUART[0-4]/(UART[0-4]_RATIO + 1) */
+/* CLK_DIV_PERIL0 */
+#define UART0_RATIO 7
+#define UART1_RATIO 7
+#define UART2_RATIO 7
+#define UART3_RATIO 4
+#define UART4_RATIO 7
+#define UART5_RATIO 7
+#define CLK_DIV_PERIL0_VAL ((UART5_RATIO << 16) \
+ | (UART4_RATIO << 12) \
+ | (UART3_RATIO << 12) \
+ | (UART2_RATIO << 8) \
+ | (UART1_RATIO << 4) \
+ | (UART0_RATIO << 0))
+
+/* Required period to generate a stable clock output */
+/* PLL_LOCK_TIME */
+#define PLL_LOCKTIME 0x1C20
+
+/* PLL Values */
+#define DISABLE 0
+#define ENABLE 1
+#define SET_PLL(mdiv, pdiv, sdiv) ((ENABLE << 31)\
+ | (mdiv << 16) \
+ | (pdiv << 8) \
+ | (sdiv << 0))
+
+/* APLL_CON0: 800MHz */
+#define APLL_MDIV 0xC8
+#define APLL_PDIV 0x6
+#define APLL_SDIV 0x1
+#define APLL_CON0_VAL SET_PLL(APLL_MDIV, APLL_PDIV, APLL_SDIV)
+
+/* APLL_CON1 */
+#define APLL_AFC_ENB 0x1
+#define APLL_AFC 0x1C
+#define APLL_CON1_VAL ((APLL_AFC_ENB << 31) | (APLL_AFC << 0))
+
+/* MPLL_CON0: 800MHz */
+#define MPLL_MDIV 0xC8
+#define MPLL_PDIV 0x6
+#define MPLL_SDIV 0x1
+#define MPLL_CON0_VAL SET_PLL(MPLL_MDIV, MPLL_PDIV, MPLL_SDIV)
+
+/* MPLL_CON1 */
+#define MPLL_AFC_ENB 0x1
+#define MPLL_AFC 0x1C
+#define MPLL_CON1_VAL ((MPLL_AFC_ENB << 31) | (MPLL_AFC << 0))
+
+/* EPLL_CON0: 96MHz */
+#define EPLL_MDIV 0x30
+#define EPLL_PDIV 0x3
+#define EPLL_SDIV 0x2
+#define EPLL_CON0_VAL SET_PLL(EPLL_MDIV, EPLL_PDIV, EPLL_SDIV)
+
+/* EPLL_CON1 */
+#define EPLL_K 0x0
+#define EPLL_CON1_VAL (EPLL_K >> 0)
+
+/* VPLL_CON0: 108MHz */
+#define VPLL_MDIV 0x35
+#define VPLL_PDIV 0x3
+#define VPLL_SDIV 0x2
+#define VPLL_CON0_VAL SET_PLL(VPLL_MDIV, VPLL_PDIV, VPLL_SDIV)
+
+/* VPLL_CON1 */
+#define VPLL_SSCG_EN DISABLE
+#define VPLL_SEL_PF_DN_SPREAD 0x0
+#define VPLL_MRR 0x11
+#define VPLL_MFR 0x0
+#define VPLL_K 0x400
+#define VPLL_CON1_VAL ((VPLL_SSCG_EN << 31)\
+ | (VPLL_SEL_PF_DN_SPREAD << 29) \
+ | (VPLL_MRR << 24) \
+ | (VPLL_MFR << 16) \
+ | (VPLL_K << 0))
+
+/*
+ * CLOCK GATE
+ *
+ * GATE CAM : All block
+ * GATE VP : All block
+ * GATE MFC : All block
+ * GATE G3D : All block
+ * GATE IMAGE : All block
+ * GATE LCD0 : All block
+ * GATE LCD1 : All block
+ * GATE FSYS : Enable - PDMA0,1, SDMMC0,2, USBHOST, USBDEVICE, PPMUFILE
+ * GATE GPS : All block
+ * GATE PERI Left : All Enable, Block - SLIMBUS, SPDIF, AC97
+ * GATE PERI Right : All Enable, Block - KEYIF
+ * GATE Block : All block
+ */
+#define CLK_EN 0x0
+#define CLK_DIS 0x1
+
+#define BIT_CAM_CLK_PIXELASYNCM1 18
+#define BIT_CAM_CLK_PIXELASYNCM0 17
+#define BIT_CAM_CLK_PPMUCAMIF 16
+#define BIT_CAM_CLK_QEFIMC3 15
+#define BIT_CAM_CLK_QEFIMC2 14
+#define BIT_CAM_CLK_QEFIMC1 13
+#define BIT_CAM_CLK_QEFIMC0 12
+#define BIT_CAM_CLK_SMMUJPEG 11
+#define BIT_CAM_CLK_SMMUFIMC3 10
+#define BIT_CAM_CLK_SMMUFIMC2 9
+#define BIT_CAM_CLK_SMMUFIMC1 8
+#define BIT_CAM_CLK_SMMUFIMC0 7
+#define BIT_CAM_CLK_JPEG 6
+#define BIT_CAM_CLK_CSIS1 5
+#define BIT_CAM_CLK_CSIS0 4
+#define BIT_CAM_CLK_FIMC3 3
+#define BIT_CAM_CLK_FIMC2 2
+#define BIT_CAM_CLK_FIMC1 1
+#define BIT_CAM_CLK_FIMC0 0
+#define CLK_GATE_IP_CAM_VAL ~((CLK_DIS << BIT_CAM_CLK_PIXELASYNCM1)\
+ | (CLK_DIS << BIT_CAM_CLK_PIXELASYNCM0)\
+ | (CLK_DIS << BIT_CAM_CLK_PPMUCAMIF)\
+ | (CLK_DIS << BIT_CAM_CLK_QEFIMC3)\
+ | (CLK_DIS << BIT_CAM_CLK_QEFIMC2)\
+ | (CLK_DIS << BIT_CAM_CLK_QEFIMC1)\
+ | (CLK_DIS << BIT_CAM_CLK_QEFIMC0)\
+ | (CLK_DIS << BIT_CAM_CLK_SMMUJPEG)\
+ | (CLK_DIS << BIT_CAM_CLK_SMMUFIMC3)\
+ | (CLK_DIS << BIT_CAM_CLK_SMMUFIMC2)\
+ | (CLK_DIS << BIT_CAM_CLK_SMMUFIMC1)\
+ | (CLK_DIS << BIT_CAM_CLK_SMMUFIMC0)\
+ | (CLK_DIS << BIT_CAM_CLK_JPEG)\
+ | (CLK_DIS << BIT_CAM_CLK_CSIS1)\
+ | (CLK_DIS << BIT_CAM_CLK_CSIS0)\
+ | (CLK_DIS << BIT_CAM_CLK_FIMC3)\
+ | (CLK_DIS << BIT_CAM_CLK_FIMC2)\
+ | (CLK_DIS << BIT_CAM_CLK_FIMC1)\
+ | (CLK_DIS << BIT_CAM_CLK_FIMC0))
+
+#define BIT_VP_CLK_PPMUTV 5
+#define BIT_VP_CLK_SMMUTV 4
+#define BIT_VP_CLK_HDMI 3
+#define BIT_VP_CLK_TVENC 2
+#define BIT_VP_CLK_MIXER 1
+#define BIT_VP_CLK_VP 0
+#define CLK_GATE_IP_VP_VAL ~((CLK_DIS << BIT_VP_CLK_PPMUTV)\
+ | (CLK_DIS << BIT_VP_CLK_SMMUTV)\
+ | (CLK_DIS << BIT_VP_CLK_HDMI)\
+ | (CLK_DIS << BIT_VP_CLK_TVENC)\
+ | (CLK_DIS << BIT_VP_CLK_MIXER)\
+ | (CLK_DIS << BIT_VP_CLK_VP))
+
+#define BIT_MFC_CLK_PPMUMFC_R 4
+#define BIT_MFC_CLK_PPMUMFC_L 3
+#define BIT_MFC_CLK_SMMUMFC_R 2
+#define BIT_MFC_CLK_SMMUMFC_L 1
+#define BIT_MFC_CLK_MFC 0
+#define CLK_GATE_IP_MFC_VAL ~((CLK_DIS << BIT_MFC_CLK_PPMUMFC_R)\
+ | (CLK_DIS << BIT_MFC_CLK_PPMUMFC_L)\
+ | (CLK_DIS << BIT_MFC_CLK_SMMUMFC_R)\
+ | (CLK_DIS << BIT_MFC_CLK_SMMUMFC_L)\
+ | (CLK_DIS << BIT_MFC_CLK_MFC))
+
+#define BIT_G3D_CLK_QEG3D 2
+#define BIT_G3D_CLK_PPMUG3D 1
+#define BIT_G3D_CLK_G3D 0
+#define CLK_GATE_IP_G3D_VAL ~((CLK_DIS << BIT_G3D_CLK_QEG3D)\
+ | (CLK_DIS << BIT_G3D_CLK_PPMUG3D)\
+ | (CLK_DIS << BIT_G3D_CLK_G3D))
+
+#define BIT_IMAGE_CLK_PPMUIMAGE 9
+#define BIT_IMAGE_CLK_QEMDMA 8
+#define BIT_IMAGE_CLK_QEROTATOR 7
+#define BIT_IMAGE_CLK_QEG2D 6
+#define BIT_IMAGE_CLK_SMMUMDMA 5
+#define BIT_IMAGE_CLK_SMMUROTATOR 4
+#define BIT_IMAGE_CLK_SMMUG2D 3
+#define BIT_IMAGE_CLK_MDMA 2
+#define BIT_IMAGE_CLK_ROTATOR 1
+#define BIT_IMAGE_CLK_G2D 0
+#define CLK_GATE_IP_IMAGE_VAL ~((CLK_DIS << BIT_IMAGE_CLK_PPMUIMAGE)\
+ | (CLK_DIS << BIT_IMAGE_CLK_QEMDMA)\
+ | (CLK_DIS << BIT_IMAGE_CLK_QEROTATOR)\
+ | (CLK_DIS << BIT_IMAGE_CLK_QEG2D)\
+ | (CLK_DIS << BIT_IMAGE_CLK_SMMUMDMA)\
+ | (CLK_DIS << BIT_IMAGE_CLK_SMMUROTATOR)\
+ | (CLK_DIS << BIT_IMAGE_CLK_SMMUG2D)\
+ | (CLK_DIS << BIT_IMAGE_CLK_MDMA)\
+ | (CLK_DIS << BIT_IMAGE_CLK_ROTATOR)\
+ | (CLK_DIS << BIT_IMAGE_CLK_G2D))
+
+#define BIT_LCD0_CLK_PPMULCD0 5
+#define BIT_LCD0_CLK_SMMUFIMD0 4
+#define BIT_LCD0_CLK_DSIM0 3
+#define BIT_LCD0_CLK_MDNIE0 2
+#define BIT_LCD0_CLK_MIE0 1
+#define BIT_LCD0_CLK_FIMD0 0
+#define CLK_GATE_IP_LCD0_VAL ~((CLK_DIS << BIT_LCD0_CLK_PPMULCD0)\
+ | (CLK_DIS << BIT_LCD0_CLK_SMMUFIMD0)\
+ | (CLK_DIS << BIT_LCD0_CLK_DSIM0)\
+ | (CLK_DIS << BIT_LCD0_CLK_MDNIE0)\
+ | (CLK_DIS << BIT_LCD0_CLK_MIE0)\
+ | (CLK_DIS << BIT_LCD0_CLK_FIMD0))
+
+#define BIT_LCD1_CLK_PPMULCD1 5
+#define BIT_LCD1_CLK_SMMUFIMD1 4
+#define BIT_LCD1_CLK_DSIM1 3
+#define BIT_LCD1_CLK_MDNIE1 2
+#define BIT_LCD1_CLK_MIE1 1
+#define BIT_LCD1_CLK_FIMD1 0
+#define CLK_GATE_IP_LCD1_VAL ~((CLK_DIS << BIT_LCD1_CLK_PPMULCD1)\
+ | (CLK_DIS << BIT_LCD1_CLK_SMMUFIMD1)\
+ | (CLK_DIS << BIT_LCD1_CLK_DSIM1)\
+ | (CLK_DIS << BIT_LCD1_CLK_MDNIE1)\
+ | (CLK_DIS << BIT_LCD1_CLK_MIE1)\
+ | (CLK_DIS << BIT_LCD1_CLK_FIMD1))
+
+#define BIT_FSYS_CLK_SMMUPCIE 18
+#define BIT_FSYS_CLK_PPMUFILE 17
+#define BIT_FSYS_CLK_NFCON 16
+#define BIT_FSYS_CLK_ONENAND 15
+#define BIT_FSYS_CLK_PCIE 14
+#define BIT_FSYS_CLK_USBDEVICE 13
+#define BIT_FSYS_CLK_USBHOST 12
+#define BIT_FSYS_CLK_SROMC 11
+#define BIT_FSYS_CLK_SATA 10
+#define BIT_FSYS_CLK_SDMMC4 9
+#define BIT_FSYS_CLK_SDMMC3 8
+#define BIT_FSYS_CLK_SDMMC2 7
+#define BIT_FSYS_CLK_SDMMC1 6
+#define BIT_FSYS_CLK_SDMMC0 5
+#define BIT_FSYS_CLK_TSI 4
+#define BIT_FSYS_CLK_SATAPHY 3
+#define BIT_FSYS_CLK_PCIEPHY 2
+#define BIT_FSYS_CLK_PDMA1 1
+#define BIT_FSYS_CLK_PDMA0 0
+#define CLK_GATE_IP_FSYS_VAL ~((CLK_DIS << BIT_FSYS_CLK_SMMUPCIE)\
+ | (CLK_EN << BIT_FSYS_CLK_PPMUFILE)\
+ | (CLK_DIS << BIT_FSYS_CLK_NFCON)\
+ | (CLK_DIS << BIT_FSYS_CLK_ONENAND)\
+ | (CLK_DIS << BIT_FSYS_CLK_PCIE)\
+ | (CLK_EN << BIT_FSYS_CLK_USBDEVICE)\
+ | (CLK_EN << BIT_FSYS_CLK_USBHOST)\
+ | (CLK_DIS << BIT_FSYS_CLK_SROMC)\
+ | (CLK_DIS << BIT_FSYS_CLK_SATA)\
+ | (CLK_DIS << BIT_FSYS_CLK_SDMMC4)\
+ | (CLK_DIS << BIT_FSYS_CLK_SDMMC3)\
+ | (CLK_EN << BIT_FSYS_CLK_SDMMC2)\
+ | (CLK_DIS << BIT_FSYS_CLK_SDMMC1)\
+ | (CLK_EN << BIT_FSYS_CLK_SDMMC0)\
+ | (CLK_DIS << BIT_FSYS_CLK_TSI)\
+ | (CLK_DIS << BIT_FSYS_CLK_SATAPHY)\
+ | (CLK_DIS << BIT_FSYS_CLK_PCIEPHY)\
+ | (CLK_EN << BIT_FSYS_CLK_PDMA1)\
+ | (CLK_EN << BIT_FSYS_CLK_PDMA0))
+
+#define BIT_GPS_CLK_SMMUGPS 1
+#define BIT_GPS_CLK_GPS 0
+#define CLK_GATE_IP_GPS_VAL ~((CLK_DIS < BIT_GPS_CLK_SMMUGPS)\
+ | (CLK_DIS << BIT_GPS_CLK_GPS))
+
+#define BIT_PERIL_CLK_MODEMIF 28
+#define BIT_PERIL_CLK_AC97 27
+#define BIT_PERIL_CLK_SPDIF 26
+#define BIT_PERIL_CLK_SLIMBUS 25
+#define BIT_PERIL_CLK_PWM 24
+#define BIT_PERIL_CLK_PCM2 23
+#define BIT_PERIL_CLK_PCM1 22
+#define BIT_PERIL_CLK_I2S2 21
+#define BIT_PERIL_CLK_I2S1 20
+#define BIT_PERIL_CLK_RESERVED0 19
+#define BIT_PERIL_CLK_SPI2 18
+#define BIT_PERIL_CLK_SPI1 17
+#define BIT_PERIL_CLK_SPI0 16
+#define BIT_PERIL_CLK_TSADC 15
+#define BIT_PERIL_CLK_I2CHDMI 14
+#define BIT_PERIL_CLK_I2C7 13
+#define BIT_PERIL_CLK_I2C6 12
+#define BIT_PERIL_CLK_I2C5 11
+#define BIT_PERIL_CLK_I2C4 10
+#define BIT_PERIL_CLK_I2C3 9
+#define BIT_PERIL_CLK_I2C2 8
+#define BIT_PERIL_CLK_I2C1 7
+#define BIT_PERIL_CLK_I2C0 6
+#define BIT_PERIL_CLK_RESERVED1 5
+#define BIT_PERIL_CLK_UART4 4
+#define BIT_PERIL_CLK_UART3 3
+#define BIT_PERIL_CLK_UART2 2
+#define BIT_PERIL_CLK_UART1 1
+#define BIT_PERIL_CLK_UART0 0
+#define CLK_GATE_IP_PERIL_VAL ~((CLK_EN << BIT_PERIL_CLK_MODEMIF)\
+ | (CLK_DIS << BIT_PERIL_CLK_AC97)\
+ | (CLK_DIS << BIT_PERIL_CLK_SPDIF)\
+ | (CLK_DIS << BIT_PERIL_CLK_SLIMBUS)\
+ | (CLK_EN << BIT_PERIL_CLK_PWM)\
+ | (CLK_EN << BIT_PERIL_CLK_PCM2)\
+ | (CLK_EN << BIT_PERIL_CLK_PCM1)\
+ | (CLK_EN << BIT_PERIL_CLK_I2S2)\
+ | (CLK_EN << BIT_PERIL_CLK_I2S1)\
+ | (CLK_EN << BIT_PERIL_CLK_RESERVED0)\
+ | (CLK_EN << BIT_PERIL_CLK_SPI2)\
+ | (CLK_EN << BIT_PERIL_CLK_SPI1)\
+ | (CLK_EN << BIT_PERIL_CLK_SPI0)\
+ | (CLK_EN << BIT_PERIL_CLK_TSADC)\
+ | (CLK_EN << BIT_PERIL_CLK_I2CHDMI)\
+ | (CLK_EN << BIT_PERIL_CLK_I2C7)\
+ | (CLK_EN << BIT_PERIL_CLK_I2C6)\
+ | (CLK_EN << BIT_PERIL_CLK_I2C5)\
+ | (CLK_EN << BIT_PERIL_CLK_I2C4)\
+ | (CLK_EN << BIT_PERIL_CLK_I2C3)\
+ | (CLK_EN << BIT_PERIL_CLK_I2C2)\
+ | (CLK_EN << BIT_PERIL_CLK_I2C1)\
+ | (CLK_EN << BIT_PERIL_CLK_I2C0)\
+ | (CLK_EN << BIT_PERIL_CLK_RESERVED1)\
+ | (CLK_EN << BIT_PERIL_CLK_UART4)\
+ | (CLK_EN << BIT_PERIL_CLK_UART3)\
+ | (CLK_EN << BIT_PERIL_CLK_UART2)\
+ | (CLK_EN << BIT_PERIL_CLK_UART1)\
+ | (CLK_EN << BIT_PERIL_CLK_UART0))
+
+
+#define BIT_PERIR_CLK_TMU_APBIF 17
+#define BIT_PERIR_CLK_KEYIF 16
+#define BIT_PERIR_CLK_RTC 15
+#define BIT_PERIR_CLK_WDT 14
+#define BIT_PERIR_CLK_MCT 13
+#define BIT_PERIR_CLK_SECKEY 12
+#define BIT_PERIR_CLK_HDMI_CEC 11
+#define BIT_PERIR_CLK_TZPC5 10
+#define BIT_PERIR_CLK_TZPC4 9
+#define BIT_PERIR_CLK_TZPC3 8
+#define BIT_PERIR_CLK_TZPC2 7
+#define BIT_PERIR_CLK_TZPC1 6
+#define BIT_PERIR_CLK_TZPC0 5
+#define BIT_PERIR_CLK_CMU_DMCPART 4
+#define BIT_PERIR_CLK_RESERVED 3
+#define BIT_PERIR_CLK_CMU_APBIF 2
+#define BIT_PERIR_CLK_SYSREG 1
+#define BIT_PERIR_CLK_CHIP_ID 0
+#define CLK_GATE_IP_PERIR_VAL ~((CLK_EN << BIT_PERIR_CLK_TMU_APBIF)\
+ | (CLK_DIS << BIT_PERIR_CLK_KEYIF)\
+ | (CLK_EN << BIT_PERIR_CLK_RTC)\
+ | (CLK_EN << BIT_PERIR_CLK_WDT)\
+ | (CLK_EN << BIT_PERIR_CLK_MCT)\
+ | (CLK_EN << BIT_PERIR_CLK_SECKEY)\
+ | (CLK_EN << BIT_PERIR_CLK_HDMI_CEC)\
+ | (CLK_EN << BIT_PERIR_CLK_TZPC5)\
+ | (CLK_EN << BIT_PERIR_CLK_TZPC4)\
+ | (CLK_EN << BIT_PERIR_CLK_TZPC3)\
+ | (CLK_EN << BIT_PERIR_CLK_TZPC2)\
+ | (CLK_EN << BIT_PERIR_CLK_TZPC1)\
+ | (CLK_EN << BIT_PERIR_CLK_TZPC0)\
+ | (CLK_EN << BIT_PERIR_CLK_CMU_DMCPART)\
+ | (CLK_EN << BIT_PERIR_CLK_RESERVED)\
+ | (CLK_EN << BIT_PERIR_CLK_CMU_APBIF)\
+ | (CLK_EN << BIT_PERIR_CLK_SYSREG)\
+ | (CLK_EN << BIT_PERIR_CLK_CHIP_ID))
+
+#define BIT_BLOCK_CLK_GPS 7
+#define BIT_BLOCK_CLK_RESERVED 6
+#define BIT_BLOCK_CLK_LCD1 5
+#define BIT_BLOCK_CLK_LCD0 4
+#define BIT_BLOCK_CLK_G3D 3
+#define BIT_BLOCK_CLK_MFC 2
+#define BIT_BLOCK_CLK_TV 1
+#define BIT_BLOCK_CLK_CAM 0
+#define CLK_GATE_BLOCK_VAL ~((CLK_DIS << BIT_BLOCK_CLK_GPS)\
+ | (CLK_DIS << BIT_BLOCK_CLK_RESERVED)\
+ | (CLK_DIS << BIT_BLOCK_CLK_LCD1)\
+ | (CLK_DIS << BIT_BLOCK_CLK_LCD0)\
+ | (CLK_DIS << BIT_BLOCK_CLK_G3D)\
+ | (CLK_DIS << BIT_BLOCK_CLK_MFC)\
+ | (CLK_DIS << BIT_BLOCK_CLK_TV)\
+ | (CLK_DIS << BIT_BLOCK_CLK_CAM))
+
+/* GPIO Offsets for UART: GPIO Contol Register */
+#define EXYNOS4_GPIO_A0_CON_OFFSET 0x00
+#define EXYNOS4_GPIO_A1_CON_OFFSET 0x20
+#define EXYNOS4_GPIO_Y4_CON_OFFSET 0x1A0
+#define EXYNOS4_GPIO_Y4_DAT_OFFSET 0x1A4
+#define EXYNOS4_GPIO_Y4_PUD_OFFSET 0x1A8
+
+/* GPIO Offsets for PMIC: GPIO Contol & Data Register */
+#define EXYNOS4_GPIO_X2_CON_OFFSET 0xC40
+#define EXYNOS4_GPIO_X2_DAT_OFFSET 0xC44
+
+/* GPIO Offsets for PS_HOLD: GPIO Control Register */
+#define EXYNOS4_PS_HOLD_CON_OFFSET 0x330C
+
+#define SET_GPIO(_v, _n, _m) (_v << (_n * _m))
+#define SET_GPIO_CON(_v, _n) SET_GPIO(_v, _n, 4)
+#define SET_GPIO_DAT(_v, _n) SET_GPIO(_v, _n, 1)
+#define SET_GPIO_PUD(_v, _n) SET_GPIO(_v, _n, 1)
+
+/* PMIC Reset pin: GPX2[7] (nPOWER) */
+#define GPIO_BIT_PMIC_RST 7
+#define EXYNOS4_GPIO_X2_CON_MASK SET_GPIO_CON(0xf, GPIO_BIT_PMIC_RST)
+#define EXYNOS4_GPIO_X2_CON_VAL SET_GPIO_CON(0x1, GPIO_BIT_PMIC_RST)
+#define EXYNOS4_GPIO_X2_DAT_VAL SET_GPIO_DAT(0x1, GPIO_BIT_PMIC_RST)
+
+/* UART_SEL: GPY4[7] */
+#define GPIO_BIT_UART_SEL 7
+#define EXYNOS4_GPIO_Y4_CON_VAL SET_GPIO_CON(0x1, GPIO_BIT_UART_SEL)
+#define EXYNOS4_GPIO_Y4_DAT_VAL SET_GPIO_DAT(0x1, GPIO_BIT_UART_SEL)
+#define EXYNOS4_GPIO_Y4_PUD_VAL SET_GPIO_PUD(0xC, GPIO_BIT_UART_SEL)
+
+/* PS_HOLD: Data Hight, Output En */
+#define BIT_DAT 8
+#define BIT_EN 9
+#define EXYNOS4_PS_HOLD_CON_VAL (0x1 << BIT_DAT | 0x1 << BIT_EN)
+
+/*
+ * UART GPIO_A0/GPIO_A1 Control Register Value
+ * 0x2: UART Function
+ * GPA1CON[3] = I2C_3_SCL (3), GPA1CON[2] = I2C_3_SDA (3)
+ */
+#define EXYNOS4_GPIO_A0_CON_VAL 0x22222222
+#define EXYNOS4_GPIO_A1_CON_VAL 0x223322
+
+/* UART Register offsets */
+#define ULCON_OFFSET 0x00
+#define UCON_OFFSET 0x04
+#define UFCON_OFFSET 0x08
+#define UBRDIV_OFFSET 0x28
+#define UFRACVAL_OFFSET 0x2C
+
+/* ULCON: UART Line Control Value 8N1 */
+#define WORD_LEN_5_BIT 0x00
+#define WORD_LEN_6_BIT 0x01
+#define WORD_LEN_7_BIT 0x02
+#define WORD_LEN_8_BIT 0x03
+
+#define STOP_BIT_1 0x00
+#define STOP_BIT_2 0x01
+
+#define NO_PARITY 0x00
+#define ODD_PARITY 0x4
+#define EVEN_PARITY 0x5
+#define FORCED_PARITY_CHECK_AS_1 0x6
+#define FORCED_PARITY_CHECK_AS_0 0x7
+
+#define INFRAMODE_NORMAL 0x00
+#define INFRAMODE_INFRARED 0x01
+
+#define ULCON_VAL ((INFRAMODE_NORMAL << 6) \
+ | (NO_PARITY << 3) \
+ | (STOP_BIT_1 << 2) \
+ | (WORD_LEN_8_BIT << 0))
+
+/*
+ * UCON: UART Control Value
+ * Tx_interrupt Type: Level
+ * Rx_interrupt Type: Level
+ * Rx Timeout Enabled: Yes
+ * Rx-Error Atatus_Int Enable: Yes
+ * Loop_Back: No
+ * Break Signal: No
+ * Transmit mode : Interrupt request/polling
+ * Receive mode : Interrupt request/polling
+ */
+#define TX_PULSE_INTERRUPT 0
+#define TX_LEVEL_INTERRUPT 1
+#define RX_PULSE_INTERRUPT 0
+#define RX_LEVEL_INTERRUPT 1
+
+#define RX_TIME_OUT ENABLE
+#define RX_ERROR_STATE_INT_ENB ENABLE
+#define LOOP_BACK DISABLE
+#define BREAK_SIGNAL DISABLE
+
+#define TX_MODE_DISABLED 0X00
+#define TX_MODE_IRQ_OR_POLL 0X01
+#define TX_MODE_DMA 0X02
+
+#define RX_MODE_DISABLED 0X00
+#define RX_MODE_IRQ_OR_POLL 0X01
+#define RX_MODE_DMA 0X02
+
+#define UCON_VAL ((TX_LEVEL_INTERRUPT << 9) \
+ | (RX_LEVEL_INTERRUPT << 8) \
+ | (RX_TIME_OUT << 7) \
+ | (RX_ERROR_STATE_INT_ENB << 6) \
+ | (LOOP_BACK << 5) \
+ | (BREAK_SIGNAL << 4) \
+ | (TX_MODE_IRQ_OR_POLL << 2) \
+ | (RX_MODE_IRQ_OR_POLL << 0))
+
+/*
+ * UFCON: UART FIFO Control Value
+ * Tx FIFO Trigger LEVEL: 2 Bytes (001)
+ * Rx FIFO Trigger LEVEL: 2 Bytes (001)
+ * Tx Fifo Reset: No
+ * Rx Fifo Reset: No
+ * FIFO Enable: Yes
+ */
+#define TX_FIFO_TRIGGER_LEVEL_0_BYTES 0x00
+#define TX_FIFO_TRIGGER_LEVEL_2_BYTES 0x1
+#define TX_FIFO_TRIGGER_LEVEL_4_BYTES 0x2
+#define TX_FIFO_TRIGGER_LEVEL_6_BYTES 0x3
+#define TX_FIFO_TRIGGER_LEVEL_8_BYTES 0x4
+#define TX_FIFO_TRIGGER_LEVEL_10_BYTES 0x5
+#define TX_FIFO_TRIGGER_LEVEL_12_BYTES 0x6
+#define TX_FIFO_TRIGGER_LEVEL_14_BYTES 0x7
+
+#define RX_FIFO_TRIGGER_LEVEL_2_BYTES 0x0
+#define RX_FIFO_TRIGGER_LEVEL_4_BYTES 0x1
+#define RX_FIFO_TRIGGER_LEVEL_6_BYTES 0x2
+#define RX_FIFO_TRIGGER_LEVEL_8_BYTES 0x3
+#define RX_FIFO_TRIGGER_LEVEL_10_BYTES 0x4
+#define RX_FIFO_TRIGGER_LEVEL_12_BYTES 0x5
+#define RX_FIFO_TRIGGER_LEVEL_14_BYTES 0x6
+#define RX_FIFO_TRIGGER_LEVEL_16_BYTES 0x7
+
+#define TX_FIFO_TRIGGER_LEVEL TX_FIFO_TRIGGER_LEVEL_2_BYTES
+#define RX_FIFO_TRIGGER_LEVEL RX_FIFO_TRIGGER_LEVEL_4_BYTES
+#define TX_FIFO_RESET DISABLE
+#define RX_FIFO_RESET DISABLE
+#define FIFO_ENABLE ENABLE
+#define UFCON_VAL ((TX_FIFO_TRIGGER_LEVEL << 8) \
+ | (RX_FIFO_TRIGGER_LEVEL << 4) \
+ | (TX_FIFO_RESET << 2) \
+ | (RX_FIFO_RESET << 1) \
+ | (FIFO_ENABLE << 0))
+/*
+ * Baud Rate Division Value
+ * 115200 BAUD:
+ * UBRDIV_VAL = SCLK_UART/((115200 * 16) - 1)
+ * UBRDIV_VAL = (800 MHz)/((115200 * 16) - 1)
+ */
+#define UBRDIV_VAL 0x35
+
+/*
+ * Fractional Part of Baud Rate Divisor:
+ * 115200 BAUD:
+ * UBRFRACVAL = ((((SCLK_UART*10/(115200*16) -10))%10)*16/10)
+ * UBRFRACVAL = ((((800MHz*10/(115200*16) -10))%10)*16/10)
+ */
+#define UFRACVAL_VAL 0x4
+
+#endif
diff --git a/boards.cfg b/boards.cfg
index 1e5b3e0..53ebb77 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -218,6 +218,7 @@ smdkc100 arm armv7 smdkc100 samsung
origen arm armv7 origen samsung exynos
s5pc210_universal arm armv7 universal_c210 samsung exynos
smdkv310 arm armv7 smdkv310 samsung exynos
+trats arm armv7 trats samsung exynos
harmony arm armv7 harmony nvidia tegra2
seaboard arm armv7 seaboard nvidia tegra2
ventana arm armv7 ventana nvidia tegra2
diff --git a/include/configs/trats.h b/include/configs/trats.h
new file mode 100644
index 0000000..d235745
--- /dev/null
+++ b/include/configs/trats.h
@@ -0,0 +1,216 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ * Heungjun Kim <riverful.kim at samsung.com>
+ *
+ * Configuation settings for the SAMSUNG TRATS (EXYNOS4210) board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_SAMSUNG /* in a SAMSUNG core */
+#define CONFIG_S5P /* which is in a S5P Family */
+#define CONFIG_EXYNOS4210 /* which is in a EXYNOS4210 */
+#define CONFIG_TRATS /* working with TRATS */
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Keep L2 Cache Disabled */
+#define CONFIG_SYS_L2CACHE_OFF
+
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define CONFIG_SYS_TEXT_BASE 0x63300000
+
+/* input clock of PLL: TRATS has 24MHz input clock at EXYNOS4210 */
+#define CONFIG_SYS_CLK_FREQ_C210 24000000
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+#define CONFIG_CMDLINE_EDITING
+
+/* MACH_TYPE_TRATS macro will be removed once added to mach-types */
+#define MACH_TYPE_TRATS 3928
+#define CONFIG_MACH_TYPE MACH_TYPE_TRATS
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
+
+/* select serial console configuration */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_SERIAL2 /* use SERIAL 2 */
+#define CONFIG_BAUDRATE 115200
+#define EXYNOS4_DEFAULT_UART_OFFSET 0x020000
+
+/* MMC */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_S5P_MMC
+
+/* PWM */
+#define CONFIG_PWM
+
+/* It should define before config_cmd_default.h */
+#define CONFIG_SYS_NO_FLASH
+
+/* Command definition */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_MISC
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_XIMG
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_MMC
+
+#define CONFIG_BOOTDELAY 1
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#define CONFIG_BOOTARGS "Please use defined boot"
+#define CONFIG_BOOTCOMMAND "run mmcboot"
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
+
+#define CONFIG_BOOTBLOCK "10"
+
+#define CONFIG_ENV_COMMON_BOOT "${console} ${meminfo}"
+
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootk=" \
+ "run loaduimage; bootm 0x40007FC0\0" \
+ "updatemmc=" \
+ "mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \
+ "mmc boot 0 1 1 0\0" \
+ "updatebackup=" \
+ "mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \
+ "mmc boot 0 1 1 0\0" \
+ "updatebootb=" \
+ "mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
+ "lpj=lpj=3981312\0" \
+ "nfsboot=" \
+ "set bootargs root=/dev/nfs rw " \
+ "nfsroot=${nfsroot},nolock,tcp " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:" \
+ "${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
+ "; run bootk\0" \
+ "ramfsboot=" \
+ "set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
+ "${console} ${meminfo} " \
+ "initrd=0x43000000,8M ramdisk=8192\0" \
+ "mmcboot=" \
+ "set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
+ "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
+ "run loaduimage; bootm 0x40007FC0\0" \
+ "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
+ "boottrace=setenv opts initcall_debug; run bootcmd\0" \
+ "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
+ "verify=n\0" \
+ "rootfstype=ext4\0" \
+ "console=" CONFIG_DEFAULT_CONSOLE \
+ "meminfo=crashkernel=32M at 0x50000000\0" \
+ "nfsroot=/nfsroot/arm\0" \
+ "bootblock=" CONFIG_BOOTBLOCK "\0" \
+ "mmcdev=0\0" \
+ "mmcbootpart=2\0" \
+ "mmcrootpart=3\0" \
+ "opts=always_resume=1"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_PROMPT "TRATS # "
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000)
+
+#define CONFIG_SYS_HZ 1000
+
+/* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/* Stack sizes */
+#define CONFIG_STACKSIZE (256 << 10) /* regular stack 256KB */
+
+/* TRATS has 2 banks of DRAM */
+#define CONFIG_NR_DRAM_BANKS 2
+#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* LDDDR2 DMC 0 */
+#define PHYS_SDRAM_1_SIZE (256 << 20) /* 256 MB in CS 0 */
+#define PHYS_SDRAM_2 0x50000000 /* LPDDR2 DMC 1 */
+#define PHYS_SDRAM_2_SIZE (256 << 20) /* 256 MB in CS 0 */
+
+#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */
+
+#define CONFIG_SYS_MONITOR_BASE 0x00000000
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_SIZE 4096
+#define CONFIG_ENV_OFFSET ((32 - 4) << 10)/* 32KiB - 4KiB */
+
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_CACHELINE_SIZE 32
+
+#include <asm/arch/gpio.h>
+/*
+ * I2C Settings
+ */
+#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_part1_get_nr(b, 7)
+#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_part1_get_nr(b, 6)
+
+#define CONFIG_SOFT_I2C
+#define CONFIG_SOFT_I2C_READ_REPEATED_START
+#define CONFIG_SYS_I2C_SPEED 50000
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS 7
+
+#define CONFIG_PMIC
+#define CONFIG_PMIC_I2C
+#define CONFIG_PMIC_MAX8998
+
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_DUALSPEED
+
+#endif /* __CONFIG_H */
--
1.7.4.1
More information about the U-Boot
mailing list