[U-Boot] [PATCH 3/3] tegra2: Add support for Compal Paz00 (Toshiba AC100)
Simon Glass
sjg at chromium.org
Mon Jan 9 20:55:50 CET 2012
Hi Stephen,
On Fri, Jan 6, 2012 at 2:14 PM, Stephen Warren <swarren at nvidia.com> wrote:
> The Toshiba AC100 (Compal code-name Paz00, aka Dynabook AZ) is a netbook
> derived from the NVIDIA Tegra Harmony reference board. It ships with
> Android, but is often repurposed to run Linux. This patch adds just enough
> support to get a U-Boot serial console, and the ability access built-in
> eMMC and the external SD slot.
>
> v2:
> * Rebased on latest HEAD, incorporated changes made to other board files.
> * Moved board files from board/nvidia to board/compal.
> * Switched to correct odmdata value. This required add the previous patch
> to fix U-Boot's interpretation of the odmdata RAM size field.
> * Removed nvmem= from default Linux kernel command-line; no drivers use the
> reserved memory yet, so there's no point reserving it.
>
> Signed-off-by: Stephen Warren <swarren at nvidia.com>
> ---
> MAINTAINERS | 1 +
> board/compal/paz00/Makefile | 41 ++++++++++++++++++++++
> board/compal/paz00/paz00.c | 81 +++++++++++++++++++++++++++++++++++++++++++
> boards.cfg | 1 +
> include/configs/paz00.h | 51 +++++++++++++++++++++++++++
> 5 files changed, 175 insertions(+), 0 deletions(-)
> create mode 100644 board/compal/paz00/Makefile
> create mode 100644 board/compal/paz00/paz00.c
> create mode 100644 include/configs/paz00.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 4bf12b5..9c796e2 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -891,6 +891,7 @@ Tom Warren <twarren at nvidia.com>
> Stephen Warren <swarren at nvidia.com>
>
> ventana Tegra2 (ARM7 & A9 Dual Core)
> + paz00 Tegra2 (ARM7 & A9 Dual Core)
>
> Thomas Weber <weber at corscience.de>
>
> diff --git a/board/compal/paz00/Makefile b/board/compal/paz00/Makefile
> new file mode 100644
> index 0000000..488e381
> --- /dev/null
> +++ b/board/compal/paz00/Makefile
> @@ -0,0 +1,41 @@
> +#
> +# Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or modify it
> +# under the terms and conditions of the GNU General Public License,
> +# version 2, as published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope it will be useful, but WITHOUT
> +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> +# more details.
> +#
> +
> +include $(TOPDIR)/config.mk
> +
> +ifneq ($(OBJTREE),$(SRCTREE))
> +$(shell mkdir -p $(obj)../../nvidia/common)
> +endif
> +
> +LIB = $(obj)lib$(BOARD).o
> +
> +COBJS := $(BOARD).o
> +COBJS += ../../nvidia/common/board.o
I think you can drop this as the top-level Makefile should bring in
the library from that directory.
> +
> +SRCS := $(COBJS:.o=.c)
> +OBJS := $(addprefix $(obj),$(COBJS))
> +
> +$(LIB): $(obj).depend $(OBJS)
> + $(call cmd_link_o_target, $(OBJS))
> +
> +#########################################################################
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> +
> +#########################################################################
> diff --git a/board/compal/paz00/paz00.c b/board/compal/paz00/paz00.c
> new file mode 100644
> index 0000000..3b48917
> --- /dev/null
> +++ b/board/compal/paz00/paz00.c
> @@ -0,0 +1,81 @@
> +/*
> + * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved.
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <asm/arch/tegra2.h>
> +#include <asm/arch/pinmux.h>
> +#include <asm/arch/mmc.h>
> +#include <asm/gpio.h>
> +#ifdef CONFIG_TEGRA2_MMC
> +#include <mmc.h>
> +#endif
> +
> +/*
> + * Routine: gpio_config_uart
> + * Description: Does nothing on Paz00 - no conflict w/SPI.
> + */
> +void gpio_config_uart(void)
> +{
> +}
> +
> +#ifdef CONFIG_TEGRA2_MMC
> +/*
> + * Routine: pin_mux_mmc
> + * Description: setup the pin muxes/tristate values for the SDMMC(s)
> + */
> +static void pin_mux_mmc(void)
> +{
> + /* SDMMC4: config 3, x8 on 2nd set of pins */
> + pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4);
> + pinmux_set_func(PINGRP_GMA, PMUX_FUNC_SDIO4);
> + pinmux_set_func(PINGRP_GME, PMUX_FUNC_SDIO4);
> +
> + pinmux_tristate_disable(PINGRP_ATB);
> + pinmux_tristate_disable(PINGRP_GMA);
> + pinmux_tristate_disable(PINGRP_GME);
> +
> + /* SDMMC1: SDIO1_CLK, SDIO1_CMD, SDIO1_DAT[3:0] */
> + pinmux_set_func(PINGRP_SDMMC1, PMUX_FUNC_SDIO1);
> +
> + pinmux_tristate_disable(PINGRP_SDMMC1);
> +
> + /* For power GPIO PV1 */
> + pinmux_tristate_disable(PINGRP_UAC);
> + /* For CD GPIO PI5 */
> + pinmux_tristate_disable(PINGRP_ATC);
> +}
Gosh, we are seeing a lot of duplication in this area - I will come up
with a patch to move this into funcmux.
> +
> +/* this is a weak define that we are overriding */
> +int board_mmc_init(bd_t *bd)
> +{
> + debug("board_mmc_init called\n");
> +
> + /* Enable muxes, etc. for SDMMC controllers */
> + pin_mux_mmc();
> +
> + debug("board_mmc_init: init eMMC\n");
> + /* init dev 0, eMMC chip, with 4-bit bus */
> + /* The board has an 8-bit bus, but 8-bit doesn't work yet */
> + tegra2_mmc_init(0, 4, -1, -1);
Yes - I will see if I can do a patch to enable 8-bit.
> +
> + debug("board_mmc_init: init SD slot\n");
> + /* init dev 3, SD slot, with 4-bit bus */
> + tegra2_mmc_init(3, 4, GPIO_PV1, GPIO_PI5);
> +
> + return 0;
> +}
> +#endif
> diff --git a/boards.cfg b/boards.cfg
> index 0b32532..8a0343a 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -247,6 +247,7 @@ colibri_pxa270 arm pxa - toradex
> jornada arm sa1100
> plutux arm armv7 plutux avionic-design tegra2
> medcom arm armv7 medcom avionic-design tegra2
> +paz00 arm armv7 paz00 compal tegra2
> atngw100 avr32 at32ap - atmel at32ap700x
> atstk1002 avr32 at32ap atstk1000 atmel at32ap700x
> atstk1003 avr32 at32ap atstk1000 atmel at32ap700x
> diff --git a/include/configs/paz00.h b/include/configs/paz00.h
> new file mode 100644
> index 0000000..f53f20e
> --- /dev/null
> +++ b/include/configs/paz00.h
> @@ -0,0 +1,51 @@
> +/*
> + * Copyright (c) 2010,2011, NVIDIA CORPORATION. All rights reserved.
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#include <asm/sizes.h>
> +#include "tegra2-common.h"
> +
> +/* High-level configuration options */
> +#define TEGRA2_SYSMEM "mem=512M at 0M"
> +#define V_PROMPT "Tegra2 (Paz00) MOD # "
> +#define CONFIG_TEGRA2_BOARD_STRING "Compal Paz00"
> +
> +/* Board-specific serial config */
> +#define CONFIG_SERIAL_MULTI
> +#define CONFIG_TEGRA2_ENABLE_UARTA
> +#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
> +
> +#define CONFIG_MACH_TYPE MACH_TYPE_PAZ00
> +#define CONFIG_SYS_BOARD_ODMDATA 0x800c0085 /* lp1, 512MB */
> +
> +#define CONFIG_BOARD_EARLY_INIT_F
> +
> +/* SD/MMC */
> +#define CONFIG_MMC
> +#define CONFIG_GENERIC_MMC
> +#define CONFIG_TEGRA2_MMC
> +#define CONFIG_CMD_MMC
> +
> +#define CONFIG_DOS_PARTITION
> +#define CONFIG_EFI_PARTITION
> +#define CONFIG_CMD_EXT2
> +#define CONFIG_CMD_FAT
> +
> +/* Environment not stored */
> +#define CONFIG_ENV_IS_NOWHERE
> +#endif /* __CONFIG_H */
> --
> 1.7.0.4
>
Regards,
Simon
More information about the U-Boot
mailing list