[U-Boot] [PATCH 3/3] WIP: tegra: i2c: Enable new I2C framework

[Heiko Schocher]

Hello Simon,

Simon Glass wrote:
> This is just a rough patch to show how this might be done.
> 
> Not to be applied, please.
> 
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
>  drivers/i2c/tegra2_i2c.c   |   53 +++++++++++++++++++------------------------
>  include/configs/seaboard.h |    2 +
>  2 files changed, 25 insertions(+), 30 deletions(-)
> 
> diff --git a/drivers/i2c/tegra2_i2c.c b/drivers/i2c/tegra2_i2c.c
> index b42d9ac..93f3269 100644
> --- a/drivers/i2c/tegra2_i2c.c
> +++ b/drivers/i2c/tegra2_i2c.c
> @@ -30,7 +30,9 @@
>  #include <asm/arch/gpio.h>
>  #include <asm/arch/pinmux.h>
>  #include <asm/arch/tegra2_i2c.h>
> +
>  #include <fdtdec.h>
> +#include <i2c.h>
>  
>  DECLARE_GLOBAL_DATA_PTR;
>  
> @@ -296,12 +298,7 @@ static int tegra2_i2c_read_data(u32 addr, u8 *data, u32 len)
>  #error "Please enable device tree support to use this driver"
>  #endif
>  
> -unsigned int i2c_get_bus_speed(void)
> -{
> -	return i2c_controllers[i2c_bus_num].speed;
> -}
> -
> -int i2c_set_bus_speed(unsigned int speed)
> +uint tegra_i2c_set_bus_speed(unsigned int speed)

static

>  {
>  	struct i2c_bus *i2c_bus;
>  
> @@ -309,7 +306,7 @@ int i2c_set_bus_speed(unsigned int speed)
>  	i2c_bus->speed = speed;
>  	i2c_init_controller(i2c_bus);
>  
> -	return 0;
> +	return 0;	/* TODO: return actual speed */
>  }
>  
>  static int i2c_get_config(const void *blob, int node, struct i2c_bus *i2c_bus)
> @@ -404,7 +401,7 @@ int i2c_init_board(void)
>  	return 0;
>  }
>  
> -void i2c_init(int speed, int slaveaddr)
> +void tegra_i2c_init(int speed, int slaveaddr)

static, add this for all functions

[...]
> diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h
> index d2d0115..64c804a 100644
> --- a/include/configs/seaboard.h
> +++ b/include/configs/seaboard.h
> @@ -79,6 +79,8 @@
>  #define CONFIG_SYS_MAX_I2C_BUS		4

This define is no longer valid if using the new framework.
Do you have really 4 busses with only one i2c adapter?

This works only, if you have i2c muxes! In this case you have to
define

/*
 * how many muxes are maximal consecutively connected on
 * one i2c bus
 */
#define CONFIG_SYS_I2C_MAX_HOPS	1

and for example using a PCA9547 mux:

#define CONFIG_SYS_I2C_BUSSES   {       {0, {I2C_NULL_HOP}}, \
                                        {0, {{I2C_MUX_PCA9547, 0x70, 1}}}, \
                                        {0, {{I2C_MUX_PCA9547, 0x70, 2}}}, \
                                        {0, {{I2C_MUX_PCA9547, 0x70, 3}}},
				}

or you use other i2c adapters like soft_i2c, but I could not see
this in your patch ... and in this case you must define
CONFIG_SYS_NUM_I2C_ADAPTERS ...

>  #define CONFIG_SYS_I2C_SPEED		100000

should not longer be defined, instead you should make a option to define
a i2c speed for your i2c driver ... for example
#define CONFIG_SYS_I2C_TEGRA2_SPEED	100000

>  #define CONFIG_CMD_I2C
> +#define CONFIG_SYS_I2C
> +#define CONFIG_SYS_I2C_ADAPTERS		{&tegra_i2c_adap}

You must have a define in drivers/i2c/Makefile which "activates" your
drivers/i2c/tegra2_i2c.c ... this must defined in your board config
file too (maybe a CONFIG_SYS_I2C_TEGRA2 ?)!

Also you must have a change in drivers/i2c/i2c_core.c

#ifdef CONFIG_SYS_I2C_TEGRA2
extern struct i2c_adap       tegra_i2c_adap[];
#endif

or?

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany