[U-Boot] [PATCH V3 2/2] ARM: omap3: add support to Technexion twister board

[Albert ARIBAUD]

(re-sent due to the U-Boot MX rejecting my provider's servers -- again)

Hi Stefano,

Le 01/12/2011 10:56, Stefano Babic a écrit :
> The twister board is a development board using
> the TAM3517 SOM.

I see this match made it in IMX then ARM, but it seems not to build here 
either with ELDK 4.2 or linaro (Ubuntu) cross tool chains:

> Configuring for twister board...
> omap_gpmc.c:33:30: attention : ‘hw_nand_oob’ defined but not used [-Wunused-variable]
> omap_gpmc.c:78:13: attention : ‘omap_hwecc_init’ defined but not used [-Wunused-function]
> omap_gpmc.c:116:12: attention : ‘omap_correct_data’ defined but not used [-Wunused-function]
> omap_gpmc.c:182:12: attention : ‘omap_calculate_ecc’ defined but not used [-Wunused-function]
> omap_gpmc.c:208:13: attention : ‘omap_enable_hwecc’ defined but not used [-Wunused-function]
> drivers/usb/host/libusb_host.o: In function `usb_lowlevel_stop':
> /home/uboot/src/u-boot-arm/drivers/usb/host/ehci-hcd.c:806: undefined reference to `ehci_hcd_stop'
> drivers/usb/host/libusb_host.o: In function `usb_lowlevel_init':
> /home/uboot/src/u-boot-arm/drivers/usb/host/ehci-hcd.c:814: undefined reference to `ehci_hcd_init'
> arm-linux-gnueabi-ld: BFD (GNU Binutils for Ubuntu) 2.21.53.20110810 assertion fail ../../bfd/elf32-arm.c:7498
> arm-linux-gnueabi-ld: BFD (GNU Binutils for Ubuntu) 2.21.53.20110810 assertion fail ../../bfd/elf32-arm.c:7498
> arm-linux-gnueabi-ld: BFD (GNU Binutils for Ubuntu) 2.21.53.20110810 assertion fail ../../bfd/elf32-arm.c:13828
> /bin/sh : ligne 1 : 23855 Erreur de segmentation  arm-linux-gnueabi-ld -pie -T u-boot.lds -Bstatic -Ttext 0x80008000 $UNDEF_SYM arch/arm/cpu/armv7/start.o --start-group api/libapi.o arch/arm/cpu/armv7/libarmv7.o arch/arm/cpu/armv7/omap-common/libomap-common.o arch/arm/cpu/armv7/omap3/libomap3.o arch/arm/lib/libarm.o common/libcommon.o disk/libdisk.o drivers/bios_emulator/libatibiosemu.o drivers/block/libblock.o drivers/dma/libdma.o drivers/fpga/libfpga.o drivers/gpio/libgpio.o drivers/hwmon/libhwmon.o drivers/i2c/libi2c.o drivers/input/libinput.o drivers/misc/libmisc.o drivers/mmc/libmmc.o drivers/mtd/libmtd.o drivers/mtd/nand/libnand.o drivers/mtd/onenand/libonenand.o drivers/mtd/spi/libspi_flash.o drivers/mtd/ubi/libubi.o drivers/net/libnet.o drivers/net/phy/libphy.o drivers/pci/libpci.o drivers/pcmcia/libpcmcia.o drivers/power/libpower.o drivers/rtc/librtc.o drivers/serial/libserial.o drivers/spi/libspi.o drivers/twserial/libtws.o drivers/usb/eth/libusb_eth.o drivers/usb

/gadget/libusb_gadget.o drivers/usb/host/libusb_host.o 
drivers/usb/musb/libusb_musb.o drivers/usb/phy/libusb_phy.o 
drivers/usb/ulpi/libusb_ulpi.o drivers/video/libvideo.o 
drivers/watchdog/libwatchdog.o fs/cramfs/libcramfs.o fs/ext2/libext2fs.o 
fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o 
fs/reiserfs/libreiserfs.o fs/ubifs/libubifs.o fs/yaffs2/libyaffs2.o 
lib/libfdt/libfdt.o lib/libgeneric.o lib/lzma/liblzma.o lib/lzo/liblzo.o 
lib/zlib/libz.o net/libnet.o post/libpost.o 
board/technexion/twister/libtwister.o --end-group 
/home/uboot/src/u-boot-arm/arch/arm/lib/eabi_compat.o -L 
/usr/lib/gcc/arm-linux-gnueabi/4.6.1 -lgcc -Map u-boot.map -o u-boot
> make: *** [u-boot] Erreur 139
> make: *** Attente des tâches non terminées....
> arm-linux-gnueabi-size: ./u-boot: File format not recognized
>
> --------------------- SUMMARY ----------------------------
> Boards compiled: 1
> Boards with warnings or errors: 1 ( twister )
> ----------------------------------------------------------

The above was tried on 10a4fa9e22b9677819b3901a87eec05875b346ad (the 
current u-boot-arm/master, but trying various commits in between it and 
92e30c07e02b84a3b63205fcb29ac57defd043f6 (creation of twister), I find 
no commit where it builds.

Stefano, can you have a look at this?

Amicalement,
-- 
Albert.