[U-Boot] [PATCH V3 2/2] ARM: omap3: add support to Technexion twister board

[Stefano Babic]

On 14/01/2012 09:47, Albert ARIBAUD wrote:
> (re-sent due to the U-Boot MX rejecting my provider's servers -- again)
> 
> Hi Stefano,
> 

Hi Albert, hi Tom,

>> drivers/usb/host/libusb_host.o: In function `usb_lowlevel_init':
>> /home/uboot/src/u-boot-arm/drivers/usb/host/ehci-hcd.c:814: undefined
>> reference to `ehci_hcd_init'

The twister board depends on several patches for the AM3517 processor
previously senty by Ilya Yanok. One of them (maybe because it is USB
related and should go into u-boot-usb) is missing.

http://patchwork.ozlabs.org/patch/130952/

The patch is set to new and assigned to Remy, but he gived up as
maintainer - nobody checks at it ;-(.

I can at least sent my tested-by - it was nice if you can pick it up.

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================