[U-Boot] [PATCH] add new board vl_ma2sc

[Heiko Schocher]

Hello Jens,

Jens Scharsig wrote:
> Hello Heiko:
>> Please check your patch with tools/checkpatch, it shows a lot
>> of warnings:
>>
>> [hs at pollux u-boot]$ ./tools/checkpatch.pl index.html
>> [...]
>> total: 17 errors, 13 warnings, 1131 lines checked
>>
> The error based on the two code sequences
> 
> <snip>
> 
> vidinfo_t panel_info = {
> 	vl_col:			320,
> 	vl_row:			240,
> 	vl_clk:			6500000,
> 	vl_sync:		ATMEL_LCDC_INVDVAL_INVERTED |
> 				ATMEL_LCDC_INVLINE_INVERTED |
> 				ATMEL_LCDC_INVVD_INVERTED   |
> 				ATMEL_LCDC_INVFRAME_INVERTED,
> 	vl_bpix:		(ATMEL_LCDC_PIXELSIZE_8 >> 5),
> 	vl_tft:			1,
> 	vl_hsync_len:		5,	/* Horiz Sync Pulse Width */
> 	vl_left_margin:		68,	/* horiz back porch */
> 	vl_right_margin:	20,	/* horiz front porch */
> 	vl_vsync_len:		2,	/* vert Sync Pulse Width */
> 	vl_upper_margin:	18,	/* vert back porch */
> 	vl_lower_margin:	4,	/* vert front porch */
> 	mmio:			ATMEL_BASE_LCDC,
> };

Try:

vidinfo_t panel_info = {
	.vl_col = 320,
[...]

> </sinp>
> 
> This block i have "stolen" from at91sam9263 board.
> 
> and
> <snip>
> #define CONFIG_ETHADDR			00:4D:41:02:52:43 /* MA2SC */
> </sinp>
> 
> Can your teach me the right format for things like this?

Hmm.. fix ethaddr in config file? I am not sure, if this is allowed
in mainline ...

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany