[U-Boot] [PATCH 3/3 v4] devkit3250: add Timll DevKit3250 board initial support

Vladimir Zapolskiy vz at mleia.com
Thu Jan 12 08:33:32 CET 2012


On 12.01.2012 01:53, Marek Vasut wrote:
>> This change adds a basic support for Embest/Timll DevKit3250 board,
>> NOR and UART are the only supported peripherals for a moment. The board
>> doesn't require low-level init, because the initial SDRAM and GPIO
>> configuration is performed during kickstart bootloader execution.
>>
>> Signed-off-by: Vladimir Zapolskiy<vz at mleia.com>
>> Cc: Albert ARIBAUD<albert.u.boot at aribaud.net>
>> Cc: Wolfgang Denk<wd at denx.de>
>> ---
>> Changes from v3 to v4:
>> * removed dcache flushing from board_init()
>> * tabs instead of spaces in board config file
>>
>> Changes from v2 to v3:
>> * updated a relocation address
>> * combined a record in maintainers file into the patch
>> * use high speed UART2 by default
>>
>> Changes from v1 to v2:
>> * corrected address in GPLv2+ licence header in files
>> * removed clean and distclean targets from board makefile
>> * do not set machine id explicitly, if CONFIG_MACH_TYPE is defined
>> * minor indentation cleanups
>>
>>   MAINTAINERS                         |    4 +
>>   board/timll/devkit3250/Makefile     |   44 +++++++++++++
>>   board/timll/devkit3250/devkit3250.c |   65 +++++++++++++++++++
>>   boards.cfg                          |    1 +
>>   include/configs/devkit3250.h        |  121
>> +++++++++++++++++++++++++++++++++++ 5 files changed, 235 insertions(+), 0
>> deletions(-)
>>   create mode 100644 board/timll/devkit3250/Makefile
>>   create mode 100644 board/timll/devkit3250/devkit3250.c
>>   create mode 100644 include/configs/devkit3250.h
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 4bf12b5..68dedae 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -914,6 +914,10 @@ Sughosh Ganu<urwithsughosh at gmail.com>
>>
>>   	hawkboard	ARM926EJS (OMAP-L138)
>>
>> +Vladimir Zapolskiy<vz at mleia.com>
>> +
>> +	devkit3250	lpc32xx
>> +
>>   -------------------------------------------------------------------------
>>
>>   Unknown / orphaned boards:
>> diff --git a/board/timll/devkit3250/Makefile
>> b/board/timll/devkit3250/Makefile new file mode 100644
>> index 0000000..ea7827c
>> --- /dev/null
>> +++ b/board/timll/devkit3250/Makefile
>> @@ -0,0 +1,44 @@
>> +#
>> +# Copyright (C) 2011 by Vladimir Zapolskiy<vz at mleia.com>
>> +# Copyright (C) 2008, Guennadi Liakhovetski<lg at denx.de>
>> +#
>> +# See file CREDITS for list of people who contributed to this
>> +# project.
>> +#
>> +# This program is free software; you can redistribute it and/or
>> +# modify it under the terms of the GNU General Public License as
>> +# published by the Free Software Foundation; either version 2 of
>> +# the License, or (at your option) any later version.
>> +#
>> +# This program is distributed in the hope that it will be useful,
>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> +# GNU General Public License for more details.
>> +#
>> +# You should have received a copy of the GNU General Public License
>> +# along with this program; if not, write to the Free Software
>> +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
>> +# MA  02110-1301, USA.
>> +#
>> +
>> +include $(TOPDIR)/config.mk
>> +
>> +LIB	= $(obj)lib$(BOARD).o
>> +
>> +COBJS	:= devkit3250.o
>> +
>> +SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
>> +OBJS	:= $(addprefix $(obj),$(COBJS))
>> +SOBJS	:= $(addprefix $(obj),$(SOBJS))
>> +
>> +$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
>> +	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
>> +
>> +#########################################################################
>> +
>> +# defines $(obj).depend target
>> +include $(SRCTREE)/rules.mk
>> +
>> +sinclude $(obj).depend
>> +
>> +#########################################################################
>> diff --git a/board/timll/devkit3250/devkit3250.c
>> b/board/timll/devkit3250/devkit3250.c new file mode 100644
>> index 0000000..877cd60
>> --- /dev/null
>> +++ b/board/timll/devkit3250/devkit3250.c
>> @@ -0,0 +1,65 @@
>> +/*
>> + * Embest/Timll DevKit3250 board support
>> + *
>> + * Copyright (C) 2011 Vladimir Zapolskiy<vz at mleia.com>
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
>> + * MA 02110-1301, USA.
>> + */
>> +
>> +#include<common.h>
>> +#include<asm/arch/sys_proto.h>
>> +#include<asm/arch/cpu.h>
>> +#include<asm/arch/emc.h>
>> +
>> +DECLARE_GLOBAL_DATA_PTR;
>> +
>> +static struct emc_t *emc = (struct emc_t *)EMC_BASE;
>> +
>> +int board_early_init_f(void)
>> +{
>> +	lpc32xx_uart_init(CONFIG_SYS_LPC32XX_UART);
>> +
>> +	return 0;
>> +}
>> +
>> +int board_init(void)
>> +{
>> +	/* adress of boot parameters */
>> +	gd->bd->bi_boot_params  = CONFIG_ENV_ADDR;
>
> This is LINUX'S BOOTARGS !!
>
Good point, env is "nowhere", but certainly here is the wrong macro.

>> +
>> +#ifdef CONFIG_SYS_FLASH_CFI
>> +	/* Use 16-bit memory interface for NOR Flash */
>> +	emc->stat[0].config	= EMC_STAT_CONFIG_PB | EMC_STAT_CONFIG_16BIT;
>> +
>> +	/* Change the NOR timings to optimum value to get maximum bandwidth */
>> +	emc->stat[0].waitwen	= EMC_STAT_WAITWEN(1);
>> +	emc->stat[0].waitoen	= EMC_STAT_WAITOEN(1);
>> +	emc->stat[0].waitrd	= EMC_STAT_WAITRD(12);
>> +	emc->stat[0].waitpage	= EMC_STAT_WAITPAGE(12);
>> +	emc->stat[0].waitwr	= EMC_STAT_WAITWR(5);
>> +	emc->stat[0].waitturn	= EMC_STAT_WAITTURN(2);
>> +#endif
>> +
>> +	return 0;
>> +}
>> +
>> +int dram_init(void)
>> +{
>> +	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
>> +				    CONFIG_SYS_SDRAM_SIZE);
>> +
>> +	return 0;
>> +}
>> diff --git a/boards.cfg b/boards.cfg
>> index 0b32532..24a98fe 100644
>> --- a/boards.cfg
>> +++ b/boards.cfg
>> @@ -176,6 +176,7 @@ omap730p2_cs0boot	     arm         arm926ejs
>> omap730p2		 ti             omap omap730p2_cs3boot	     arm
>> arm926ejs   omap730p2		 ti             omap        omap730p2:CS3_BOOT
>> edminiv2                     arm         arm926ejs   -
>> LaCie          orion5x dkb			     arm         arm926ejs   -
>>     Marvell        pantheon +devkit3250                   arm
>> arm926ejs   devkit3250          timll          lpc32xx versatileab
>>           arm         arm926ejs   versatile           armltd
>> versatile   versatile:ARCH_VERSATILE_AB versatilepb                  arm
>>        arm926ejs   versatile           armltd         versatile
>> versatile:ARCH_VERSATILE_PB versatileqemu                arm
>> arm926ejs   versatile           armltd         versatile
>> versatile:ARCH_VERSATILE_QEMU,ARCH_VERSATILE_PB diff --git
>> a/include/configs/devkit3250.h b/include/configs/devkit3250.h new file
>> mode 100644
>> index 0000000..d805cfd
>> --- /dev/null
>> +++ b/include/configs/devkit3250.h
>> @@ -0,0 +1,121 @@
>> +/*
>> + * Embest/Timll DevKit3250 board configuration file
>> + *
>> + * Copyright (C) 2011 Vladimir Zapolskiy<vz at mleia.com>
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License
>> + * as published by the Free Software Foundation; either version 2
>> + * of the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
>> + * MA 02110-1301, USA.
>> + */
>> +
>> +#ifndef __CONFIG_DEVKIT3250_H__
>> +#define __CONFIG_DEVKIT3250_H__
>> +
>> +/* SoC and board defines */
>> +#include<asm/sizes.h>
>> +#include<asm/arch/cpu.h>
>> +
>> +/*
>> + * Define DevKit3250 machine type by hand until it lands in mach-types
>> + */
>> +#define MACH_TYPE_DEVKIT3250		3697
>> +#define CONFIG_MACH_TYPE		MACH_TYPE_DEVKIT3250
>> +
>> +#define CONFIG_SYS_ICACHE_OFF
>> +#define CONFIG_SYS_DCACHE_OFF
>> +#define CONFIG_SKIP_LOWLEVEL_INIT
>> +#define CONFIG_BOARD_EARLY_INIT_F
>> +
>> +/*
>> + * Memory configurations
>> + */
>> +#define CONFIG_NR_DRAM_BANKS		1
>> +#define CONFIG_STACKSIZE		SZ_32K
>> +#define CONFIG_SYS_MALLOC_LEN		SZ_1M
>> +#define CONFIG_SYS_GBL_DATA_SIZE	128
>> +#define CONFIG_SYS_SDRAM_BASE		EMC_DYCS0_BASE
>> +#define CONFIG_SYS_SDRAM_SIZE		SZ_64M
>> +#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
>> +#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_TEXT_BASE - SZ_1M)
>> +
>> +#define CONFIG_SYS_TEXT_BASE		0x83FA0000
>> +#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_MEMTEST_START + SZ_32K)
>> +
>> +#define CONFIG_SYS_INIT_RAM_SIZE	SZ_4K
>> +#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_SDRAM_BASE + \
>> +					 CONFIG_SYS_INIT_RAM_SIZE -	\
>> +					 GENERATED_GBL_DATA_SIZE)
>> +#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_GBL_DATA_OFFSET
>> +
>> +/*
>> + * Serial Driver
>> + */
>> +#define CONFIG_SYS_LPC32XX_UART		2   /* UART2 */
>> +#define CONFIG_BAUDRATE			115200
>> +
>> +/*
>> + * NOR Flash
>> + */
>> +#define CONFIG_CMD_FLASH
>> +#define CONFIG_SYS_MAX_FLASH_BANKS	1
>> +#define CONFIG_SYS_MAX_FLASH_SECT	71
>> +#define CONFIG_SYS_FLASH_BASE		EMC_CS0_BASE
>> +#define CONFIG_SYS_FLASH_SIZE		SZ_4M
>> +#define CONFIG_SYS_FLASH_CFI
>> +
>> +/*
>> + * U-Boot General Configurations
>> + */
>> +#define CONFIG_SYS_LONGHELP
>> +#define CONFIG_SYS_PROMPT		"=>  "
>> +#define CONFIG_SYS_CBSIZE		1024
>> +#define CONFIG_SYS_PBSIZE		\
>> +	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
>> +#define CONFIG_SYS_MAXARGS		16
>> +#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
>> +
>> +#define CONFIG_AUTO_COMPLETE
>> +#define CONFIG_CMDLINE_EDITING
>> +#define CONFIG_VERSION_VARIABLE
>> +#define CONFIG_DISPLAY_CPUINFO
>> +#define CONFIG_DOS_PARTITION
>> +
>> +#define CONFIG_ENV_IS_NOWHERE
>> +#define CONFIG_ENV_SIZE			SZ_128K
>> +#define CONFIG_ENV_ADDR			0x80000100
>> +
>> +/*
>> + * U-Boot Commands
>> + */
>> +#include<config_cmd_default.h>
>> +#define CONFIG_CMD_CACHE
>> +
>> +/*
>> + * Boot Linux
>> + */
>> +#define CONFIG_CMDLINE_TAG
>> +#define CONFIG_SETUP_MEMORY_TAGS
>> +#define CONFIG_ZERO_BOOTDELAY_CHECK
>> +#define CONFIG_BOOTDELAY		3
>> +
>> +#define CONFIG_BOOTFILE			"uImage"
>> +#define CONFIG_BOOTARGS			"console=ttyS2,115200n8"
>> +#define CONFIG_LOADADDR			0x80008000
>> +
>> +/*
>> + * Include SoC specific configuration
>> + */
>> +#include<asm/arch/config.h>
>> +
>> +#endif  /* __CONFIG_DEVKIT3250_H__*/


-- 
With best wishes,
Vladimir


More information about the U-Boot mailing list