[U-Boot] [PATCH 1/2 V2] arm926: Flush the data cache before disabling it.

[Sughosh Ganu]

On Wed Jan 11, 2012 at 11:47:27AM +0100, Marek Vasut wrote:
> > On Tue Jan 10, 2012 at 09:07:58PM +0100, Marek Vasut wrote:
> > > > The current implementation invalidates the cache instead of flushing
> > > > it. This causes problems on platforms where the spl/u-boot is already
> > > > loaded to the RAM, with caches enabled by a first stage bootloader.
> > > 
> > > What platforms are affected?
> > 
> >   It is causing a problem on the hawkboard, where the spl is loaded
> >   directly to the RAM by a rom bootloader. We did not see this earlier
> >   since cpu_init_crit was not getting called due to
> >   CONFIG_SKIP_LOWLEVEL_INIT.
> > 
> > -sughosh
> 
> I see ... why don't you directly load U-Boot to DRAM then ?

  The rom bootloader(rbl) uses a different ecc layout from the one
  used by the davinci nand driver(u-boot and linux). Using rbl to load
  the u-boot to dram would mean that i have to use the TI's external
  flashing utility every time i upgrade u-boot. Also, i would not be
  able to flash u-boot from the kernel.

-sughosh