[U-Boot] [PATCH v5 2/3] zipitz2: enable pxa27x_mkp driver
Vasily Khoruzhick
anarsoul at gmail.com
Tue Jan 24 20:41:31 CET 2012
Signed-off-by: Vasily Khoruzhick <anarsoul at gmail.com>
---
v2: remove usbtty stuff from EXTRA_ENV_SETTINGS
v3: shift+backspace should produce backspace code
v4: no change
v5: prettify CONFIG_PXA27X_MKP_KEYMAP
include/configs/zipitz2.h | 82 ++++++++++++++++++++++++++++++++++++++++++---
1 files changed, 77 insertions(+), 5 deletions(-)
diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h
index 26204af..615f9bc 100644
--- a/include/configs/zipitz2.h
+++ b/include/configs/zipitz2.h
@@ -80,6 +80,12 @@
#define CONFIG_CMD_MMC
#define CONFIG_CMD_SPI
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "stdout=lcd\0" \
+ "stdin=pxa27x-mkp\0" \
+ "stderr=lcd\0" \
+ ""
+#define CONFIG_KEYBOARD
/*
* MMC Card Configuration
*/
@@ -206,15 +212,81 @@ unsigned char zipitz2_spi_read(void);
#define CONFIG_SYS_FLASH_PROTECTION
/*
+ * Matrix keypad
+ */
+#ifdef CONFIG_KEYBOARD
+#define CONFIG_PXA27X_MKP
+
+#define CONFIG_PXA27X_MKP_MKP_COLS 7
+#define CONFIG_PXA27X_MKP_MKP_ROWS 6
+
+#define CONFIG_PXA27X_MKP_DEBOUNCE 30
+#define CONFIG_PXA27X_MKP_DELAY 30000
+
+#define CONFIG_PXA27X_MKP_MOD_SHIFT {5, 3}
+#define CONFIG_PXA27X_MKP_MOD_ALT {5, 2}
+#define CONFIG_PXA27X_MKP_MOD_CTRL {5, 4}
+
+#define CONFIG_PXA27X_MKP_KEYMAP \
+ { 1, 1, 'q', 'Q', '1', 0xff }, \
+ { 2, 1, 'i', 'I', '8', 0xff }, \
+ { 3, 1, 'g', 'G', '\"', 0xff }, \
+ { 4, 1, 'x', 'X', '/', 0xff }, \
+ { 5, 1, '\r', 0xff, 0xff, 0xff }, \
+ { 6, 1, '-', 0xff, 0xff, 0xff }, \
+ \
+ { 1, 2, 'w', 'W', '2', 0xff }, \
+ { 2, 2, 'o', 'O', '9', 0xff }, \
+ { 3, 2, 'h', 'H', '\'', 0xff }, \
+ { 4, 2, 'c', 'C', '+', 0xff }, \
+ \
+ { 1, 3, 'e', 'E', '3', 0xff }, \
+ { 2, 3, 'p', 'P', '0', 0xff }, \
+ { 3, 3, 'j', 'J', '[', 0xff }, \
+ { 4, 3, 'v', 'V', '*', 0xff }, \
+ \
+ { 0, 4, '\e', 0xff, '|', 0xff }, \
+ { 1, 4, 'r', 'R', '4', 0xff }, \
+ { 2, 4, 'a', 'A', '$', 0xff }, \
+ { 3, 4, 'k', 'K', ']', 0xff }, \
+ { 4, 4, 'b', 'B', '=', 0xff }, \
+ \
+ { 0, 5, '\t', 0xff, 0xff, 0xff }, \
+ { 1, 5, 't', 'T', '5', 0xff }, \
+ { 2, 5, 's', 'S', '#', 0xff }, \
+ { 3, 5, 'l', 'L', '-', 0xff }, \
+ { 4, 5, 'n', 'N', '_', 0xff }, \
+ { 5, 5, ' ', 0xff, 0xff, 0xff }, \
+ \
+ { 1, 6, 'y', 'Y', '6', 0xff }, \
+ { 2, 6, 'd', 'D', '&', 0xff }, \
+ { 3, 6, '\b', '\b', '\\', 0xff }, \
+ { 4, 6, 'm', 'M', '?', 0xff }, \
+ { 5, 6, ',', '(', '<', '{' }, \
+ \
+ { 1, 7, 'u', 'U', '7', 0xff }, \
+ { 2, 7, 'f', 'F', '@', 0xff }, \
+ { 3, 7, 'z', 'Z', '!', 0xff }, \
+ { 4, 7, ';', '~', ':', 0xff }, \
+ { 5, 7, '.', ')', '>', '}' }, \
+ \
+ { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }
+
+#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+#endif
+
+/*
* GPIO settings
*/
#define CONFIG_SYS_GAFR0_L_VAL 0x02000140
-#define CONFIG_SYS_GAFR0_U_VAL 0x59188000
-#define CONFIG_SYS_GAFR1_L_VAL 0x63900002
+#define CONFIG_SYS_GAFR0_U_VAL 0x59188005
+#define CONFIG_SYS_GAFR1_L_VAL 0x639420a2
#define CONFIG_SYS_GAFR1_U_VAL 0xaaa03950
#define CONFIG_SYS_GAFR2_L_VAL 0x0aaaaaaa
#define CONFIG_SYS_GAFR2_U_VAL 0x29000308
-#define CONFIG_SYS_GAFR3_L_VAL 0x54000000
+#define CONFIG_SYS_GAFR3_L_VAL 0x56aa9500
#define CONFIG_SYS_GAFR3_U_VAL 0x000000d5
#define CONFIG_SYS_GPCR0_VAL 0x00000000
#define CONFIG_SYS_GPCR1_VAL 0x00000020
@@ -222,7 +294,7 @@ unsigned char zipitz2_spi_read(void);
#define CONFIG_SYS_GPCR3_VAL 0x00000000
#define CONFIG_SYS_GPDR0_VAL 0xdafcee00
#define CONFIG_SYS_GPDR1_VAL 0xffa3aaab
-#define CONFIG_SYS_GPDR2_VAL 0x8fe9ffff
+#define CONFIG_SYS_GPDR2_VAL 0x8fe1ffff
#define CONFIG_SYS_GPDR3_VAL 0x001b1f8a
#define CONFIG_SYS_GPSR0_VAL 0x06080400
#define CONFIG_SYS_GPSR1_VAL 0x007f0000
@@ -234,7 +306,7 @@ unsigned char zipitz2_spi_read(void);
/*
* Clock settings
*/
-#define CONFIG_SYS_CKEN 0x00511220
+#define CONFIG_SYS_CKEN 0x00591220
#define CONFIG_SYS_CCCR 0x00000190
/*
--
1.7.8.4
More information about the U-Boot
mailing list