[U-Boot] bootelf command for Pandaboard

[Wolfgang Denk]

Dear Boban Petrovic,

In message <CAEmUQn3XBJO7O9u-GsODqRcWfTjTis2t3KY_Vs2QJECnEHwi-Q at mail.gmail.com> you wrote:
>
> I have specific need to boot my Pandaboard with an elf image. I noticed
> that in u-boot-2011.12 bootelf command is disabled by default in
> omap4_panda_config. I am wondering if there is a reason for not having
> bootelf command for Pandaboard. Thanks.

If you enable all features and commands available in U-Boot you will
end up with a huge image whih consists mostly of unused, unneeded
stuff.

If you have requirements for more exotic configurations it's trivial
to enable these in your local copy of the config file.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Only a fool fights in a burning house.
	-- Kank the Klingon, "Day of the Dove", stardate unknown