[U-Boot] [PATCH] ARM: tegra: Define Tegra20 CAR binding

[Colin Cross]

On Tue, Jan 24, 2012 at 2:08 PM, Stephen Warren <swarren at nvidia.com> wrote:
> Peter De Schrijver wrote at Tuesday, January 24, 2012 2:53 AM:
>> What about the peripheral resets which are also handled by CAR? Peripheral
>> clock nodes also offer assert and deassert methods for the reset signal
>> associated with them. Those methods are used when powergating domains for
>> example. Should we model this in the same binding?
>
> In most cases, I think the resets are handled purely within clock enable
> and disable, so there's no need to explicitly manage them or represent
> them in the device tree. Do you agree here?

clk_enable could force a deasserted reset, but clk_disable cannot
imply asserting reset.  The clocks need to be turned off for power
management without resetting the registers.

> I recall that you mentioned some power-management code might need to
> manage reset separately though. Can you explain why a module would be
> reset separately from disabling the clocks though?

The TRM lists a very specific sequence of clocks, resets, clamps, and
power for power domain gating.  Other than that, I think the only use
for directly calling reset that ended up in the Android Tegra2 tree
was for error recovery on HW blocks that could get locked up, probably
I2C.

> If we do need this, I think we can just add a property to the node of
> each device that needs such explicit management. Something like:
>
> tegra_car: clock at 60006000 {
>    compatible = "nvidia,tegra20-car";
>    ....
> };
>
> foo at 70007000 {
>    compatible = "nvidia,tegra20-foo";
>    regs = <...>;
>    nvidia,car-reset-id = <&tegra_car 30>;
> };
>
> And the driver for "foo" can ignore cell 0, and extract the cell 1 and
> pass the value to tegra_periph_reset_assert().
>
> I'd expect to put the CAR phandle into the property in case we ever get
> a more generalized reset subsystem, and need more general code to
> interpret the property. I did the same for the Tegra APB DMA controller
> client binding where clients need to know the "DMA select" value.
>
> Does that all seem reasonable?
>
> --
> nvpublic
>