[U-Boot] [PATCH V3] imx6: mx6qarm2: updated board_mmc_getcd() to the new prototype

Stefano Babic sbabic at denx.de
Wed Jan 18 10:41:12 CET 2012


Commit 314284b1567f1ce29c19060641e7f213146f7ab8 has
changed board_mmc_getcd() function prototype, while
mx6qarm2 has still the old one.

Signed-off-by: Stefano Babic <sbabic at denx.de>
CC: Jason Liu <jason.hui at linaro.org>
Acked-by: Dirk Behme <dirk.behme at de.bosch.com>
---
Changes since V1:
- update subject (Fabio Estevam)

Changes since V2:
- board_mmc_getcd() must return 1 in the else clause (Jason Liu)

Note: not tested on real board, the patch fixes building.

 board/freescale/mx6qarm2/mx6qarm2.c |    9 +++++----
 1 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c
index 9894245..1367b88 100644
--- a/board/freescale/mx6qarm2/mx6qarm2.c
+++ b/board/freescale/mx6qarm2/mx6qarm2.c
@@ -120,17 +120,18 @@ struct fsl_esdhc_cfg usdhc_cfg[2] = {
 	{USDHC4_BASE_ADDR, 1},
 };
 
-int board_mmc_getcd(u8 *cd, struct mmc *mmc)
+int board_mmc_getcd(struct mmc *mmc)
 {
 	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	int ret;
 
 	if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
 		gpio_direction_input(171); /*GPIO6_11*/
-		*cd = gpio_get_value(171);
+		ret = !gpio_get_value(171);
 	} else /* Don't have the CD GPIO pin on board */
-		*cd = 0;
+		ret = 1;
 
-	return 0;
+	return ret;
 }
 
 int board_mmc_init(bd_t *bis)
-- 
1.7.5.4



More information about the U-Boot mailing list