[U-Boot] [PATCH 4/5] net: fec_mxc: Nove autonegoatiate restart after mii_postcall

Troy Kisky troy.kisky at boundarydevices.com
Fri Jan 13 22:42:03 CET 2012


On 1/13/2012 5:44 AM, Marek Vasut wrote:
>> From: Troy Kisky<troy.kisky at boundarydevices.com>
>>
>> Allow boards to change what is advertised before an autoneg
>> restart happens.
>>
>> Signed-off-by: Troy Kisky<troy.kisky at boundarydevices.com>
>> CC: Troy Kisky<troy.kisky at boundarydevices.com>
>> CC: Stefano Babic<sbabic at denx.de>
>> CC: Marek Vasut<marek.vasut at gmail.com>
>> ---
>>   drivers/net/fec_mxc.c |    6 +++---
>>   1 files changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
>> index b50e01c..6271df5 100644
>> --- a/drivers/net/fec_mxc.c
>> +++ b/drivers/net/fec_mxc.c
>> @@ -206,12 +206,12 @@ static int miiphy_restart_aneg(struct eth_device
>> *dev) miiphy_write(dev->name, fec->phy_id, MII_ADVERTISE,
>>   			LPA_100FULL | LPA_100HALF | LPA_10FULL |
>>   			LPA_10HALF | PHY_ANLPAR_PSB_802_3);
>> -	miiphy_write(dev->name, fec->phy_id, MII_BMCR,
>> -			BMCR_ANENABLE | BMCR_ANRESTART);
>> -
>>   	if (fec->mii_postcall)
>>   		ret = fec->mii_postcall(fec->phy_id);
>>
>> +	miiphy_write(dev->name, fec->phy_id, MII_BMCR,
>> +			BMCR_ANENABLE | BMCR_ANRESTART);
>> +
>>   	return ret;
>>   }
> I think this might break boards using the mii_postcall.
>
Since only 3 boards use this. Perhaps I should code as

if (fec->mii_start_aneg_call)
	ret = fec->mii_start_aneg_call(fec->phy_id);
else
	miiphy_write(dev->name, fec->phy_id, MII_BMCR,
		BMCR_ANENABLE | BMCR_ANRESTART);



and copy the
	miiphy_write(dev->name, fec->phy_id, MII_BMCR,
		BMCR_ANENABLE | BMCR_ANRESTART);


into all three callbacks?

Troy







More information about the U-Boot mailing list