[U-Boot] [PATCH v3 0/7] overo: add SPL support

[Tom Rini]

On Wed, Jan 4, 2012 at 6:26 PM, Andreas Müller <schnitzeltony at gmx.de> wrote:
> V1 -> V2
> * cleanups: replace printf with one argument by puts [1-2]
> * cleanups: remove unused macros and macro values / tabbing / remove FSF address [3]
> * i2c: move all local variables to SRAM [4]
> * OMAP SPL: call timer_init in s_init to make udelay work earlier [5]
> * hint CONFIG_SYS_TEXT_BASE changed in commit message [6]
> * remove log 'Texas Instruments Revision detection unimplemented' for overo [6]
> * remove unintended whitespaces [6]
> * send 'shut up' to TWL4030 to avoid corruption when reading board revision [6]
> * use macros for overo revisions [6]
> * don't separate SPL specific configurations [6]
>
> V2 -> V3
> * modify omap_rev_string [6]
> * CONFIG_SYS_TEXT_BASE back to 0x80008000 [7]
> * modify CONFIG_SYS_SPL_MALLOC_START / CONFIG_SYS_SPL_MALLOC_SIZE /
>  CONFIG_SPL_BSS_START_ADDR to avoid conflicts with CONFIG_SYS_TEXT_BASE [7]
>
> Andreas Müller (7):
>  drivers/i2c/omap24xx_i2c.c: replace printf with one argument by puts
>  board/overo/overo.c: replace printf with one argument by puts
>  include/configs/omap3_overo.h: several cleanups
>  drivers/i2c/omap24xx_i2c.c: move all local variables to SRAM
>  OMAP SPL: call timer_init in s_init to make udelay work earlier
>  omap_rev_string: output to stdout
>  overo: add SPL support
>
>  arch/arm/cpu/armv7/omap-common/hwinit-common.c |   10 +-
>  arch/arm/cpu/armv7/omap-common/spl.c           |   12 +--
>  arch/arm/cpu/armv7/omap3/board.c               |    2 +
>  arch/arm/include/asm/arch-omap3/mem.h          |   26 +++++
>  arch/arm/include/asm/arch-omap4/sys_proto.h    |    2 +-
>  arch/arm/include/asm/arch-omap5/sys_proto.h    |    2 +-
>  arch/arm/include/asm/omap_common.h             |    2 +-
>  board/overo/config.mk                          |   28 ------
>  board/overo/overo.c                            |   79 ++++++++++++++--
>  board/overo/overo.h                            |    9 ++
>  drivers/i2c/omap24xx_i2c.c                     |   25 +++--
>  include/configs/omap3_overo.h                  |  121 ++++++++++++++++--------
>  12 files changed, 217 insertions(+), 101 deletions(-)
>  delete mode 100644 board/overo/config.mk

With the changes posted in reply to 6/7, applied to u-boot-ti/master, thanks!

-- 
Tom