[U-Boot] [PATCH V6 - Part 3 - 0/2] SPI flash enhancements: allow default bus and chip-selects

[Mike Frysinger]

On Tuesday 31 January 2012 12:52:06 Eric Nelson wrote:
> Patch 1 modifies the 'sf' command to allow a default bus and chip-select
> to be specified by board headers. This allows a bare 'sf' probe command:
>       U-Boot> sf probe
> instead of the more cumbersome usage when a GPIO is tacked onto
> the chip-select. Otherwise, this command-line would be needed
> to specify GP3:19 on SabreLite:
>       U-Boot> sf probe 0x5300
> 
> Patch 2 provides a description of usage and configuration of CONFIG_CMD_SF.

you can drop these two SF patches from your mx6q series.  i don't want to keep 
checking to see if you've updated them :p.
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120131/eeb25e19/attachment.pgp>