[U-Boot] [PATCH v3 3/4] zipitz2: use pxa_mmc_gen as MMC driver

[Vasily Khoruzhick]

Signed-off-by: Vasily Khoruzhick <anarsoul at gmail.com>
---
v2: mmcinfo is necessary to scan card for partitions
v3: replace mmcinfo with mmc rescan

 board/zipitz2/zipitz2.c   |    8 ++++++++
 include/configs/zipitz2.h |   14 ++++++++------
 2 files changed, 16 insertions(+), 6 deletions(-)

diff --git a/board/zipitz2/zipitz2.c b/board/zipitz2/zipitz2.c
index b093c2f..4075fb6 100644
--- a/board/zipitz2/zipitz2.c
+++ b/board/zipitz2/zipitz2.c
@@ -79,6 +79,14 @@ void dram_init_banksize(void)
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 }
 
+#ifdef	CONFIG_CMD_MMC
+int board_mmc_init(bd_t *bis)
+{
+	pxa_mmc_register(0);
+	return 0;
+}
+#endif
+
 #ifdef	CONFIG_CMD_SPI
 
 struct {
diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h
index 76054af..4f48d9b 100644
--- a/include/configs/zipitz2.h
+++ b/include/configs/zipitz2.h
@@ -44,11 +44,12 @@
 #define	CONFIG_SYS_MALLOC_LEN		(128*1024)
 #define	CONFIG_ARCH_CPU_INIT
 
-#define	CONFIG_BOOTCOMMAND						\
-	"if mmc init && fatload mmc 0 0xa0000000 uboot.script ; then "	\
-		"source 0xa0000000; "					\
-	"else "								\
-		"bootm 0x60000; "					\
+#define	CONFIG_BOOTCOMMAND						   \
+	"if mmc rescan 0 && ext2load mmc 0 0xa0000000 boot/uboot.script ;" \
+	"then "								   \
+		"source 0xa0000000; "					   \
+	"else "								   \
+		"bootm 0x60000; "					   \
 	"fi; "
 #define	CONFIG_BOOTARGS							\
 	"console=tty0 console=ttyS2,115200 fbcon=rotate:3"
@@ -91,7 +92,8 @@
  */
 #ifdef	CONFIG_CMD_MMC
 #define	CONFIG_MMC
-#define	CONFIG_PXA_MMC
+#define	CONFIG_GENERIC_MMC
+#define	CONFIG_PXA_MMC_GENERIC
 #define	CONFIG_SYS_MMC_BASE		0xF0000000
 #define	CONFIG_CMD_FAT
 #define CONFIG_CMD_EXT2
-- 
1.7.8.3