[U-Boot] [PATCH 3/3] ARM: AM33XX: Add i2c support
Patil, Rachna
rachna at ti.com
Fri Jan 13 11:03:43 CET 2012
Add i2c driver board hookup for AM335X EVM.
Signed-off-by: Chandan Nath <chandan.nath at ti.com>
Signed-off-by: Patil, Rachna <rachna at ti.com>
---
arch/arm/cpu/armv7/am33xx/clock.c | 5 ++
arch/arm/include/asm/arch-am33xx/common_def.h | 1 +
arch/arm/include/asm/arch-am33xx/cpu.h | 3 +-
arch/arm/include/asm/arch-am33xx/i2c.h | 81 +++++++++++++++++++++++++
board/ti/am335x/evm.c | 6 ++
board/ti/am335x/mux.c | 14 ++++
include/configs/am335x_evm.h | 9 +++
7 files changed, 118 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/include/asm/arch-am33xx/i2c.h
diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c
index 98cfd93..bbb9c13 100644
--- a/arch/arm/cpu/armv7/am33xx/clock.c
+++ b/arch/arm/cpu/armv7/am33xx/clock.c
@@ -113,6 +113,11 @@ static void enable_per_clocks(void)
writel(PRCM_MOD_EN, &cmper->mmc0clkctrl);
while (readl(&cmper->mmc0clkctrl) != PRCM_MOD_EN)
;
+
+ /* i2c0 */
+ writel(PRCM_MOD_EN, &cmwkup->wkup_i2c0ctrl);
+ while (readl(&cmwkup->wkup_i2c0ctrl) != PRCM_MOD_EN)
+ ;
}
static void mpu_pll_config(void)
diff --git a/arch/arm/include/asm/arch-am33xx/common_def.h b/arch/arm/include/asm/arch-am33xx/common_def.h
index 767932d..aa3b554 100644
--- a/arch/arm/include/asm/arch-am33xx/common_def.h
+++ b/arch/arm/include/asm/arch-am33xx/common_def.h
@@ -18,5 +18,6 @@
extern void enable_uart0_pin_mux(void);
extern void enable_mmc0_pin_mux(void);
+extern void enable_i2c0_pin_mux(void);
#endif/*__COMMON_DEF_H__ */
diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h
index 25558a2..cd002e6 100644
--- a/arch/arm/include/asm/arch-am33xx/cpu.h
+++ b/arch/arm/include/asm/arch-am33xx/cpu.h
@@ -95,7 +95,8 @@ struct cm_wkuppll {
unsigned int divm2dpllper; /* offset 0xAC */
unsigned int resv11[1];
unsigned int wkup_uart0ctrl; /* offset 0xB4 */
- unsigned int resv12[8];
+ unsigned int wkup_i2c0ctrl; /* offset 0xB8 */
+ unsigned int resv12[7];
unsigned int divm6dpllcore; /* offset 0xD8 */
};
diff --git a/arch/arm/include/asm/arch-am33xx/i2c.h b/arch/arm/include/asm/arch-am33xx/i2c.h
new file mode 100644
index 0000000..366e2bb
--- /dev/null
+++ b/arch/arm/include/asm/arch-am33xx/i2c.h
@@ -0,0 +1,81 @@
+/*
+ * (C) Copyright 2012
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _I2C_H_
+#define _I2C_H_
+
+#define I2C_BASE1 0x44E0B000
+#define I2C_BASE2 0x4802A000
+#define I2C_BASE3 0x4819C000
+#define I2C_BUS_MAX 3
+
+#define I2C_DEFAULT_BASE I2C_BASE1
+
+struct i2c {
+ unsigned short revnb_lo; /* 0x00 */
+ unsigned short res1;
+ unsigned short revnb_hi; /* 0x04 */
+ unsigned short res2[13];
+ unsigned short sysc; /* 0x20 */
+ unsigned short res3;
+ unsigned short irqstatus_raw; /* 0x24 */
+ unsigned short res4;
+ unsigned short stat; /* 0x28 */
+ unsigned short res5;
+ unsigned short ie; /* 0x2C */
+ unsigned short res6;
+ unsigned short irqenable_clr; /* 0x30 */
+ unsigned short res7;
+ unsigned short iv; /* 0x34 */
+ unsigned short res8[45];
+ unsigned short syss; /* 0x90 */
+ unsigned short res9;
+ unsigned short buf; /* 0x94 */
+ unsigned short res10;
+ unsigned short cnt; /* 0x98 */
+ unsigned short res11;
+ unsigned short data; /* 0x9C */
+ unsigned short res13;
+ unsigned short res14; /* 0xA0 */
+ unsigned short res15;
+ unsigned short con; /* 0xA4 */
+ unsigned short res16;
+ unsigned short oa; /* 0xA8 */
+ unsigned short res17;
+ unsigned short sa; /* 0xAC */
+ unsigned short res18;
+ unsigned short psc; /* 0xB0 */
+ unsigned short res19;
+ unsigned short scll; /* 0xB4 */
+ unsigned short res20;
+ unsigned short sclh; /* 0xB8 */
+ unsigned short res21;
+ unsigned short systest; /* 0xBC */
+ unsigned short res22;
+ unsigned short bufstat; /* 0xC0 */
+ unsigned short res23;
+};
+
+#define I2C_IP_CLK 48000000
+#define I2C_INTERNAL_SAMLPING_CLK 12000000
+
+#endif /* _I2C_H_ */
diff --git a/board/ti/am335x/evm.c b/board/ti/am335x/evm.c
index 6a9f788..158c71f 100644
--- a/board/ti/am335x/evm.c
+++ b/board/ti/am335x/evm.c
@@ -42,6 +42,12 @@ int init_basic_setup(void)
int board_init(void)
{
enable_uart0_pin_mux();
+
+#ifdef CONFIG_I2C
+ enable_i2c0_pin_mux();
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
+
init_basic_setup();
return 0;
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index 4cb0cdf..ac90c35 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -272,6 +272,14 @@ static struct module_pin_mux mmc0_pin_mux[] = {
};
#endif
+static struct module_pin_mux i2c0_pin_mux[] = {
+ {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE |
+ PULLUDEN | SLEWCTRL)}, /* I2C_DATA */
+ {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE |
+ PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */
+ {-1},
+};
+
/*
* Configure the pin mux for the module
*/
@@ -297,3 +305,9 @@ void enable_mmc0_pin_mux(void)
configure_module_pin_mux(mmc0_pin_mux);
}
#endif
+
+void enable_i2c0_pin_mux(void)
+{
+ configure_module_pin_mux(i2c0_pin_mux);
+}
+
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 2cea1f4..6683b3e 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -103,6 +103,14 @@
#define CONFIG_SYS_NS16550_CLK (48000000)
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
+/* I2C Configuration */
+#define CONFIG_I2C
+#define CONFIG_CMD_I2C
+#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SLAVE 1
+#define CONFIG_DRIVER_OMAP24XX_I2C
+
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \
4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 }
@@ -131,6 +139,7 @@
#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
--
1.7.1
More information about the U-Boot
mailing list