[U-Boot] [PATCH 2/3] ARM: AM33XX: Add AM33XX I2C driver support
Patil, Rachna
rachna at ti.com
Fri Jan 13 11:02:38 CET 2012
1. Compliant with Philips I2C specification version 2.1
2. Supports upto 100Kbps in standard mode.
Signed-off-by: Chandan Nath <chandan.nath at ti.com>
Signed-off-by: Patil, Rachna <rachna at ti.com>
---
drivers/i2c/omap24xx_i2c.c | 20 +++++++++++++-------
1 files changed, 13 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index 88e26b2..ac381a5 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -142,7 +142,7 @@ static void flush_fifo(void)
stat = readw(&i2c_base->stat);
if (stat == I2C_STAT_RRDY) {
#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
- defined(CONFIG_OMAP44XX)
+ defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX)
readb(&i2c_base->data);
#else
readw(&i2c_base->data);
@@ -246,7 +246,8 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
switch (alen) {
case 2:
/* Send address MSByte */
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
+ defined(CONFIG_AM33XX)
writew(((addr >> 8) & 0xFF), &i2c_base->data);
/* Clearing XRDY event */
@@ -263,7 +264,8 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
}
#endif
case 1:
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
+ defined(CONFIG_AM33XX)
/* Send address LSByte */
writew((addr & 0xFF), &i2c_base->data);
#else
@@ -313,7 +315,8 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
}
if (status & I2C_STAT_RRDY) {
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
+ defined(CONFIG_AM33XX)
buffer[i] = readb(&i2c_base->data);
#else
*((u16 *)&buffer[i]) =
@@ -404,7 +407,8 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
if (!i2c_error) {
if (status & I2C_STAT_XRDY) {
switch (alen) {
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
+ defined(CONFIG_AM33XX)
case 2:
/* send out MSB byte */
writeb(((addr >> 8) & 0xFF), &i2c_base->data);
@@ -424,7 +428,8 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
break;
}
case 1:
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
+ defined(CONFIG_AM33XX)
/* send out MSB byte */
writeb((addr & 0xFF), &i2c_base->data);
#else
@@ -446,7 +451,8 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
if (!i2c_error) {
for (i = ((alen > 1) ? 0 : 1); i < len; i++) {
if (status & I2C_STAT_XRDY) {
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
+#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
+ defined(CONFIG_AM33XX)
writeb((buffer[i] & 0xFF),
&i2c_base->data);
#else
--
1.7.1
More information about the U-Boot
mailing list