[U-Boot] [PATCH 3/3] ARM: AM33XX: Add i2c support

[Kumar Nath, Chandan]

Rachna,

> -----Original Message-----
> From: Patil, Rachna
> Sent: Friday, January 13, 2012 3:34 PM
> To: u-boot at lists.denx.de
> Cc: Rini, Tom; Kumar Nath, Chandan; Zhang, Jonathan; Patil, Rachna
> Subject: [PATCH 3/3] ARM: AM33XX: Add i2c support
> 
> Add i2c driver board hookup for AM335X EVM.
> 
> Signed-off-by: Chandan Nath <chandan.nath at ti.com>
> Signed-off-by: Patil, Rachna <rachna at ti.com>
> ---
>  arch/arm/cpu/armv7/am33xx/clock.c             |    5 ++
>  arch/arm/include/asm/arch-am33xx/common_def.h |    1 +
>  arch/arm/include/asm/arch-am33xx/cpu.h        |    3 +-
>  arch/arm/include/asm/arch-am33xx/i2c.h        |   81
> +++++++++++++++++++++++++
>  board/ti/am335x/evm.c                         |    6 ++
>  board/ti/am335x/mux.c                         |   14 ++++
>  include/configs/am335x_evm.h                  |    9 +++
>  7 files changed, 118 insertions(+), 1 deletions(-)
>  create mode 100644 arch/arm/include/asm/arch-am33xx/i2c.h

[....]

> +void enable_i2c0_pin_mux(void)
> +{
> +	configure_module_pin_mux(i2c0_pin_mux);
> +}
> +

Remove this extra line in EOF. This shows whitespace error while doing git am.

> diff --git a/include/configs/am335x_evm.h
> b/include/configs/am335x_evm.h
> index 2cea1f4..6683b3e 100644
> --- a/include/configs/am335x_evm.h
> +++ b/include/configs/am335x_evm.h
> @@ -103,6 +103,14 @@
>  #define CONFIG_SYS_NS16550_CLK		(48000000)
>  #define CONFIG_SYS_NS16550_COM1		0x44e09000	/* Base EVM has
> UART0 */
> 
> +/* I2C Configuration */
> +#define CONFIG_I2C
> +#define CONFIG_CMD_I2C
> +#define CONFIG_HARD_I2C
> +#define CONFIG_SYS_I2C_SPEED		100000
> +#define CONFIG_SYS_I2C_SLAVE		1
> +#define CONFIG_DRIVER_OMAP24XX_I2C
> +
>  #define CONFIG_BAUDRATE		115200
>  #define CONFIG_SYS_BAUDRATE_TABLE	{ 110, 300, 600, 1200, 2400, \
>  4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 }
> @@ -131,6 +139,7 @@
>  #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME	"u-boot.img"
>  #define CONFIG_SPL_MMC_SUPPORT
>  #define CONFIG_SPL_FAT_SUPPORT
> +#define CONFIG_SPL_I2C_SUPPORT
> 
>  #define CONFIG_SPL_LIBCOMMON_SUPPORT
>  #define CONFIG_SPL_LIBDISK_SUPPORT
> --
> 1.7.1