[U-Boot] [PATCH 1/3 v8] arm926ejs: add NXP LPC32x0 cpu series support
Marek Vasut
marek.vasut at gmail.com
Fri Jan 13 13:45:38 CET 2012
> This change adds initial support for NXP LPC32x0 SoC series.
>
> Signed-off-by: Vladimir Zapolskiy <vz at mleia.com>
> Cc: Albert ARIBAUD <albert.u.boot at aribaud.net>
> Cc: Wolfgang Denk <wd at denx.de>
> ---
Quick skim looks fine:
Acked-by: Marek Vasut <marek.vasut at gmail.com>
> Changes from v7 to v8:
> * renamed register structures from *_t to *_regs
> * renamed clkpwr.c file to clk.c
> * fixed several macro definitions
> * various cosmetic fixes
>
> Changes from v6 to v7:
> * get use of setbits_le32() and friends
> * add arch_cpu_init() routine
>
> Changes from v5 to v6:
> * replaced some spaces with tabs in macro declarations
> * more rules separating 14-clock and ns16650 UARTs in config.h
>
> Changes from v4 to v5:
> * corrected address in GPLv2+ licence header in files
>
> Changes from v3 to v4:
> * extended memory controller definitions are introduced
> * added print_cpuinfo() function
>
> Changes from v2 to v3:
> * checkpatch.pl reports zero errors and warnings
>
> Changes from v1 to v2:
> * BIT(n) and SBF(s, v) macro are not used anymore
> * removed NS16550 and 14-clock UART definitions from uart.h
> * added devices.c file, which contains standard UART preinitialization
> routine * added get_serial_clock() function, it returns actual frequency
> of UART clock * __udelay() realization is simplified, no need of interrupt
> handling
>
> arch/arm/cpu/arm926ejs/lpc32xx/Makefile | 45 +++++++
> arch/arm/cpu/arm926ejs/lpc32xx/clk.c | 117 +++++++++++++++++
> arch/arm/cpu/arm926ejs/lpc32xx/cpu.c | 70 ++++++++++
> arch/arm/cpu/arm926ejs/lpc32xx/devices.c | 52 ++++++++
> arch/arm/cpu/arm926ejs/lpc32xx/timer.c | 90 +++++++++++++
> arch/arm/include/asm/arch-lpc32xx/clk.h | 170
> +++++++++++++++++++++++++ arch/arm/include/asm/arch-lpc32xx/config.h |
> 76 +++++++++++
> arch/arm/include/asm/arch-lpc32xx/cpu.h | 64 +++++++++
> arch/arm/include/asm/arch-lpc32xx/emc.h | 92 +++++++++++++
> arch/arm/include/asm/arch-lpc32xx/sys_proto.h | 25 ++++
> arch/arm/include/asm/arch-lpc32xx/timer.h | 74 +++++++++++
> arch/arm/include/asm/arch-lpc32xx/uart.h | 54 ++++++++
> arch/arm/include/asm/arch-lpc32xx/wdt.h | 51 ++++++++
> 13 files changed, 980 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/Makefile
> create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/clk.c
> create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/cpu.c
> create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/devices.c
> create mode 100644 arch/arm/cpu/arm926ejs/lpc32xx/timer.c
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/clk.h
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/config.h
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/cpu.h
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/emc.h
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/sys_proto.h
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/timer.h
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/uart.h
> create mode 100644 arch/arm/include/asm/arch-lpc32xx/wdt.h
>
> diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/Makefile
> b/arch/arm/cpu/arm926ejs/lpc32xx/Makefile new file mode 100644
> index 0000000..ae1f0a5
> --- /dev/null
> +++ b/arch/arm/cpu/arm926ejs/lpc32xx/Makefile
> @@ -0,0 +1,45 @@
> +#
> +# (C) Copyright 2000-2006
> +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License
> +# as published by the Free Software Foundation; either version 2
> +# of the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> +# MA 02110-1301, USA.
> +#
> +
> +include $(TOPDIR)/config.mk
> +
> +LIB = $(obj)lib$(SOC).o
> +
> +COBJS = cpu.o clk.o devices.o timer.o
> +
> +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
> +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
> +
> +all: $(obj).depend $(LIB)
> +
> +$(LIB): $(OBJS)
> + $(call cmd_link_o_target, $(OBJS))
> +
> +#########################################################################
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> +
> +#########################################################################
> diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/clk.c
> b/arch/arm/cpu/arm926ejs/lpc32xx/clk.c new file mode 100644
> index 0000000..6f26d62
> --- /dev/null
> +++ b/arch/arm/cpu/arm926ejs/lpc32xx/clk.c
> @@ -0,0 +1,117 @@
> +/*
> + * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301, USA.
> + */
> +
> +#include <common.h>
> +#include <div64.h>
> +#include <asm/arch/cpu.h>
> +#include <asm/arch/clk.h>
> +#include <asm/io.h>
> +
> +static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE;
> +
> +unsigned int get_sys_clk_rate(void)
> +{
> + if (readl(&clk->sysclk_ctrl) & CLK_SYSCLK_PLL397)
> + return RTC_CLK_FREQUENCY * 397;
> + else
> + return OSC_CLK_FREQUENCY;
> +}
> +
> +unsigned int get_hclk_pll_rate(void)
> +{
> + unsigned long long fin, fref, fcco, fout;
> + u32 val, m_div, n_div, p_div;
> +
> + /*
> + * Valid frequency ranges:
> + * 1 * 10^6 <= Fin <= 20 * 10^6
> + * 1 * 10^6 <= Fref <= 27 * 10^6
> + * 156 * 10^6 <= Fcco <= 320 * 10^6
> + */
> +
> + fref = fin = get_sys_clk_rate();
> + if (fin > 20000000ULL || fin < 1000000ULL)
> + return 0;
> +
> + val = readl(&clk->hclkpll_ctrl);
> + m_div = ((val & CLK_HCLK_PLL_FEEDBACK_DIV_MASK) >> 1) + 1;
> + n_div = ((val & CLK_HCLK_PLL_PREDIV_MASK) >> 9) + 1;
> + if (val & CLK_HCLK_PLL_DIRECT)
> + p_div = 0;
> + else
> + p_div = ((val & CLK_HCLK_PLL_POSTDIV_MASK) >> 11) + 1;
> + p_div = 1 << p_div;
> +
> + if (val & CLK_HCLK_PLL_BYPASS) {
> + do_div(fin, p_div);
> + return fin;
> + }
> +
> + do_div(fref, n_div);
> + if (fref > 27000000ULL || fref < 1000000ULL)
> + return 0;
> +
> + fout = fref * m_div;
> + if (val & CLK_HCLK_PLL_FEEDBACK) {
> + fcco = fout;
> + do_div(fout, p_div);
> + } else
> + fcco = fout * p_div;
> +
> + if (fcco > 320000000ULL || fcco < 156000000ULL)
> + return 0;
> +
> + return fout;
> +}
> +
> +unsigned int get_hclk_clk_div(void)
> +{
> + u32 val;
> +
> + val = readl(&clk->hclkdiv_ctrl) & CLK_HCLK_ARM_PLL_DIV_MASK;
> +
> + return 1 << val;
> +}
> +
> +unsigned int get_hclk_clk_rate(void)
> +{
> + return get_hclk_pll_rate() / get_hclk_clk_div();
> +}
> +
> +unsigned int get_periph_clk_div(void)
> +{
> + u32 val;
> +
> + val = readl(&clk->hclkdiv_ctrl) & CLK_HCLK_PERIPH_DIV_MASK;
> +
> + return (val >> 2) + 1;
> +}
> +
> +unsigned int get_periph_clk_rate(void)
> +{
> + if (!(readl(&clk->pwr_ctrl) & CLK_PWR_NORMAL_RUN))
> + return get_sys_clk_rate();
> +
> + return get_hclk_pll_rate() / get_periph_clk_div();
> +}
> +
> +int get_serial_clock(void)
> +{
> + return get_periph_clk_rate();
> +}
> diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c
> b/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c new file mode 100644
> index 0000000..e29e130
> --- /dev/null
> +++ b/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c
> @@ -0,0 +1,70 @@
> +/*
> + * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301, USA.
> + */
> +
> +#include <common.h>
> +#include <asm/arch/cpu.h>
> +#include <asm/arch/clk.h>
> +#include <asm/arch/wdt.h>
> +#include <asm/io.h>
> +
> +static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE;
> +static struct wdt_regs *wdt = (struct wdt_regs *)WDT_BASE;
> +
> +void reset_cpu(ulong addr)
> +{
> + /* Enable watchdog clock */
> + setbits_le32(&clk->timclk_ctrl, CLK_TIMCLK_WATCHDOG);
> +
> + /* Reset pulse length is 13005 peripheral clock frames */
> + writel(13000, &wdt->pulse);
> +
> + /* Force WDOG_RESET2 and RESOUT_N signal active */
> + writel(WDTIM_MCTRL_RESFRC2 | WDTIM_MCTRL_RESFRC1 | WDTIM_MCTRL_M_RES2,
> + &wdt->mctrl);
> +
> + while (1)
> + /* NOP */;
> +}
> +
> +#if defined(CONFIG_ARCH_CPU_INIT)
> +int arch_cpu_init(void)
> +{
> + /*
> + * It might be necessary to flush data cache, if U-boot is loaded
> + * from kickstart bootloader, e.g. from S1L loader
> + */
> + flush_dcache_all();
> +
> + return 0;
> +}
> +#else
> +#error "You have to select CONFIG_ARCH_CPU_INIT"
> +#endif
> +
> +#if defined(CONFIG_DISPLAY_CPUINFO)
> +int print_cpuinfo(void)
> +{
> + printf("CPU: NXP LPC32XX\n");
> + printf("CPU clock: %uMHz\n", get_hclk_pll_rate() / 1000000);
> + printf("AHB bus clock: %uMHz\n", get_hclk_clk_rate() / 1000000);
> + printf("Peripheral clock: %uMHz\n", get_periph_clk_rate() / 1000000);
> +
> + return 0;
> +}
> +#endif
> diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
> b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c new file mode 100644
> index 0000000..9f305b5
> --- /dev/null
> +++ b/arch/arm/cpu/arm926ejs/lpc32xx/devices.c
> @@ -0,0 +1,52 @@
> +/*
> + * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301, USA.
> + */
> +
> +#include <common.h>
> +#include <asm/arch/cpu.h>
> +#include <asm/arch/clk.h>
> +#include <asm/arch/uart.h>
> +#include <asm/io.h>
> +
> +static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE;
> +static struct uart_ctrl_regs *ctrl = (struct uart_ctrl_regs
> *)UART_CTRL_BASE; +
> +void lpc32xx_uart_init(unsigned int uart_id)
> +{
> + if (uart_id < 1 || uart_id > 7)
> + return;
> +
> + /* Disable loopback mode, if it is set by S1L bootloader */
> + clrbits_le32(&ctrl->loop,
> + UART_LOOPBACK(CONFIG_SYS_LPC32XX_UART));
> +
> + if (uart_id < 3 || uart_id > 6)
> + return;
> +
> + /* Enable UART system clock */
> + setbits_le32(&clk->uartclk_ctrl, CLK_UART(uart_id));
> +
> + /* Set UART into autoclock mode */
> + clrsetbits_le32(&ctrl->clkmode,
> + UART_CLKMODE_MASK(uart_id),
> + UART_CLKMODE_AUTO(uart_id));
> +
> + /* Bypass pre-divider of UART clock */
> + writel(CLK_UART_X_DIV(1) | CLK_UART_Y_DIV(1),
> + &clk->u3clk + (uart_id - 3));
> +}
> diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/timer.c
> b/arch/arm/cpu/arm926ejs/lpc32xx/timer.c new file mode 100644
> index 0000000..ae3f666
> --- /dev/null
> +++ b/arch/arm/cpu/arm926ejs/lpc32xx/timer.c
> @@ -0,0 +1,90 @@
> +/*
> + * Copyright (C) 2011 Vladimir Zapolskiy <vz at mleia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301, USA.
> + */
> +
> +#include <common.h>
> +#include <asm/arch/cpu.h>
> +#include <asm/arch/clk.h>
> +#include <asm/arch/timer.h>
> +#include <asm/io.h>
> +
> +static struct timer_regs *timer0 = (struct timer_regs *)TIMER0_BASE;
> +static struct timer_regs *timer1 = (struct timer_regs *)TIMER1_BASE;
> +static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE;
> +
> +static void lpc32xx_timer_clock(u32 bit, int enable)
> +{
> + if (enable)
> + setbits_le32(&clk->timclk_ctrl1, bit);
> + else
> + clrbits_le32(&clk->timclk_ctrl1, bit);
> +}
> +
> +static void lpc32xx_timer_reset(struct timer_regs *timer, u32 freq)
> +{
> + writel(TIMER_TCR_COUNTER_RESET, &timer->tcr);
> + writel(TIMER_TCR_COUNTER_DISABLE, &timer->tcr);
> + writel(0, &timer->tc);
> + writel(0, &timer->pr);
> +
> + /* Count mode is every rising PCLK edge */
> + writel(TIMER_CTCR_MODE_TIMER, &timer->ctcr);
> +
> + /* Set prescale counter value */
> + writel((get_periph_clk_rate() / freq) - 1, &timer->pr);
> +}
> +
> +static void lpc32xx_timer_count(struct timer_regs *timer, int enable)
> +{
> + if (enable)
> + writel(TIMER_TCR_COUNTER_ENABLE, &timer->tcr);
> + else
> + writel(TIMER_TCR_COUNTER_DISABLE, &timer->tcr);
> +}
> +
> +int timer_init(void)
> +{
> + lpc32xx_timer_clock(CLK_TIMCLK_TIMER0, 1);
> + lpc32xx_timer_reset(timer0, CONFIG_SYS_HZ);
> + lpc32xx_timer_count(timer0, 1);
> +
> + return 0;
> +}
> +
> +ulong get_timer(ulong base)
> +{
> + return readl(&timer0->tc) - base;
> +}
> +
> +void __udelay(unsigned long usec)
> +{
> + lpc32xx_timer_clock(CLK_TIMCLK_TIMER1, 1);
> + lpc32xx_timer_reset(timer1, CONFIG_SYS_HZ * 1000);
> + lpc32xx_timer_count(timer1, 1);
> +
> + while (readl(&timer1->tc) < usec)
> + /* NOP */;
> +
> + lpc32xx_timer_count(timer1, 0);
> + lpc32xx_timer_clock(CLK_TIMCLK_TIMER1, 0);
> +}
> +
> +ulong get_tbclk(void)
> +{
> + return CONFIG_SYS_HZ;
> +}
> diff --git a/arch/arm/include/asm/arch-lpc32xx/clk.h
> b/arch/arm/include/asm/arch-lpc32xx/clk.h new file mode 100644
> index 0000000..c1dad0a
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-lpc32xx/clk.h
> @@ -0,0 +1,170 @@
> +/*
> + * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301, USA.
> + */
> +
> +#ifndef _LPC32XX_CLK_H
> +#define _LPC32XX_CLK_H
> +
> +#include <asm/types.h>
> +
> +#define OSC_CLK_FREQUENCY 13000000
> +#define RTC_CLK_FREQUENCY 32768
> +
> +/* Clocking and Power Control Registers */
> +struct clk_pm_regs {
> + u32 reserved0[5];
> + u32 boot_map; /* Boot Map Control Register */
> + u32 p0_intr_er; /* Port 0/1 Start and Interrupt Enable */
> + u32 usbdiv_ctrl; /* USB Clock Pre-Divide Register */
> + /* Internal Start Signal Sources Registers */
> + u32 start_er_int; /* Start Enable Register */
> + u32 start_rsr_int; /* Start Raw Status Register */
> + u32 start_sr_int; /* Start Status Register */
> + u32 start_apr_int; /* Start Activation Polarity Register */
> + /* Device Pin Start Signal Sources Registers */
> + u32 start_er_pin; /* Start Enable Register */
> + u32 start_rsr_pin; /* Start Raw Status Register */
> + u32 start_sr_pin; /* Start Status Register */
> + u32 start_apr_pin; /* Start Activation Polarity Register */
> + /* Clock Control Registers */
> + u32 hclkdiv_ctrl; /* HCLK Divider Control Register */
> + u32 pwr_ctrl; /* Power Control Register */
> + u32 pll397_ctrl; /* PLL397 Control Register */
> + u32 osc_ctrl; /* Main Oscillator Control Register */
> + u32 sysclk_ctrl; /* SYSCLK Control Register */
> + u32 lcdclk_ctrl; /* LCD Clock Control Register */
> + u32 hclkpll_ctrl; /* HCLK PLL Control Register */
> + u32 reserved1;
> + u32 adclk_ctrl1; /* ADC Clock Control1 Register */
> + u32 usb_ctrl; /* USB Control Register */
> + u32 sdramclk_ctrl; /* SDRAM Clock Control Register */
> + u32 ddr_lap_nom; /* DDR Calibration Nominal Value */
> + u32 ddr_lap_count; /* DDR Calibration Measured Value */
> + u32 ddr_cal_delay; /* DDR Calibration Delay Value */
> + u32 ssp_ctrl; /* SSP Control Register */
> + u32 i2s_ctrl; /* I2S Clock Control Register */
> + u32 ms_ctrl; /* Memory Card Control Register */
> + u32 reserved2[3];
> + u32 macclk_ctrl; /* Ethernet MAC Clock Control Register */
> + u32 reserved3[4];
> + u32 test_clk; /* Test Clock Selection Register */
> + u32 sw_int; /* Software Interrupt Register */
> + u32 i2cclk_ctrl; /* I2C Clock Control Register */
> + u32 keyclk_ctrl; /* Keyboard Scan Clock Control Register */
> + u32 adclk_ctrl; /* ADC Clock Control Register */
> + u32 pwmclk_ctrl; /* PWM Clock Control Register */
> + u32 timclk_ctrl; /* Watchdog and Highspeed Timer Control */
> + u32 timclk_ctrl1; /* Motor and Timer Clock Control */
> + u32 spi_ctrl; /* SPI Control Register */
> + u32 flashclk_ctrl; /* NAND Flash Clock Control Register */
> + u32 reserved4;
> + u32 u3clk; /* UART 3 Clock Control Register */
> + u32 u4clk; /* UART 4 Clock Control Register */
> + u32 u5clk; /* UART 5 Clock Control Register */
> + u32 u6clk; /* UART 6 Clock Control Register */
> + u32 irdaclk; /* IrDA Clock Control Register */
> + u32 uartclk_ctrl; /* UART Clock Control Register */
> + u32 dmaclk_ctrl; /* DMA Clock Control Register */
> + u32 autoclk_ctrl; /* Autoclock Control Register */
> +};
> +
> +/* HCLK Divider Control Register bits */
> +#define CLK_HCLK_DDRAM_HALF (0x2 << 7)
> +#define CLK_HCLK_DDRAM_NOMINAL (0x1 << 7)
> +#define CLK_HCLK_DDRAM_STOPPED (0x0 << 7)
> +#define CLK_HCLK_PERIPH_DIV_MASK (0x1F << 2)
> +#define CLK_HCLK_PERIPH_DIV(n) ((((n) - 1) & 0x1F) << 2)
> +#define CLK_HCLK_ARM_PLL_DIV_MASK (0x3 << 0)
> +#define CLK_HCLK_ARM_PLL_DIV_4 (0x2 << 0)
> +#define CLK_HCLK_ARM_PLL_DIV_2 (0x1 << 0)
> +#define CLK_HCLK_ARM_PLL_DIV_1 (0x0 << 0)
> +
> +/* Power Control Register bits */
> +#define CLK_PWR_HCLK_RUN_PERIPH (1 << 10)
> +#define CLK_PWR_EMC_SREFREQ (1 << 9)
> +#define CLK_PWR_EMC_SREFREQ_UPDATE (1 << 8)
> +#define CLK_PWR_SDRAM_SREFREQ (1 << 7)
> +#define CLK_PWR_HIGHCORE_LEVEL (1 << 5)
> +#define CLK_PWR_SYSCLKEN_LEVEL (1 << 4)
> +#define CLK_PWR_SYSCLKEN_CTRL (1 << 3)
> +#define CLK_PWR_NORMAL_RUN (1 << 2)
> +#define CLK_PWR_HIGHCORE_CTRL (1 << 1)
> +#define CLK_PWR_STOP_MODE (1 << 0)
> +
> +/* SYSCLK Control Register bits */
> +#define CLK_SYSCLK_PLL397 (1 << 1)
> +#define CLK_SYSCLK_MUX (1 << 0)
> +
> +/* HCLK PLL Control Register bits */
> +#define CLK_HCLK_PLL_OPERATING (1 << 16)
> +#define CLK_HCLK_PLL_BYPASS (1 << 15)
> +#define CLK_HCLK_PLL_DIRECT (1 << 14)
> +#define CLK_HCLK_PLL_FEEDBACK (1 << 13)
> +#define CLK_HCLK_PLL_POSTDIV_MASK (0x3 << 11)
> +#define CLK_HCLK_PLL_POSTDIV_16 (0x3 << 11)
> +#define CLK_HCLK_PLL_POSTDIV_8 (0x2 << 11)
> +#define CLK_HCLK_PLL_POSTDIV_4 (0x1 << 11)
> +#define CLK_HCLK_PLL_POSTDIV_2 (0x0 << 11)
> +#define CLK_HCLK_PLL_PREDIV_MASK (0x3 << 9)
> +#define CLK_HCLK_PLL_PREDIV_4 (0x3 << 9)
> +#define CLK_HCLK_PLL_PREDIV_3 (0x2 << 9)
> +#define CLK_HCLK_PLL_PREDIV_2 (0x1 << 9)
> +#define CLK_HCLK_PLL_PREDIV_1 (0x0 << 9)
> +#define CLK_HCLK_PLL_FEEDBACK_DIV_MASK (0xFF << 1)
> +#define CLK_HCLK_PLL_FEEDBACK_DIV(n) ((((n) - 1) & 0xFF) << 1)
> +#define CLK_HCLK_PLL_LOCKED (1 << 0)
> +
> +/* Ethernet MAC Clock Control Register bits */
> +#define CLK_MAC_RMII (0x3 << 3)
> +#define CLK_MAC_MII (0x1 << 3)
> +#define CLK_MAC_MASTER (1 << 2)
> +#define CLK_MAC_SLAVE (1 << 1)
> +#define CLK_MAC_REG (1 << 0)
> +
> +/* Timer Clock Control1 Register bits */
> +#define CLK_TIMCLK_MOTOR (1 << 6)
> +#define CLK_TIMCLK_TIMER3 (1 << 5)
> +#define CLK_TIMCLK_TIMER2 (1 << 4)
> +#define CLK_TIMCLK_TIMER1 (1 << 3)
> +#define CLK_TIMCLK_TIMER0 (1 << 2)
> +#define CLK_TIMCLK_TIMER5 (1 << 1)
> +#define CLK_TIMCLK_TIMER4 (1 << 0)
> +
> +/* Timer Clock Control Register bits */
> +#define CLK_TIMCLK_HSTIMER (1 << 1)
> +#define CLK_TIMCLK_WATCHDOG (1 << 0)
> +
> +/* UART Clock Control Register bits */
> +#define CLK_UART(n) (1 << ((n) - 3))
> +
> +/* UARTn Clock Select Registers bits */
> +#define CLK_UART_HCLK (1 << 16)
> +#define CLK_UART_X_DIV(n) (((n) & 0xFF) << 8)
> +#define CLK_UART_Y_DIV(n) (((n) & 0xFF) << 0)
> +
> +/* DMA Clock Control Register bits */
> +#define CLK_DMA_ENABLE (1 << 0)
> +
> +unsigned int get_sys_clk_rate(void);
> +unsigned int get_hclk_pll_rate(void);
> +unsigned int get_hclk_clk_div(void);
> +unsigned int get_hclk_clk_rate(void);
> +unsigned int get_periph_clk_div(void);
> +unsigned int get_periph_clk_rate(void);
> +
> +#endif /* _LPC32XX_CLK_H */
> diff --git a/arch/arm/include/asm/arch-lpc32xx/config.h
> b/arch/arm/include/asm/arch-lpc32xx/config.h new file mode 100644
> index 0000000..41fcd32
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-lpc32xx/config.h
> @@ -0,0 +1,76 @@
> +/*
> + * Common definitions for LPC32XX board configurations
> + *
> + * Copyright (C) 2011 Vladimir Zapolskiy <vz at mleia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301, USA.
> + */
> +
> +#ifndef _LPC32XX_CONFIG_H
> +#define _LPC32XX_CONFIG_H
> +
> +/* Basic CPU architecture */
> +#define CONFIG_ARM926EJS
> +#define CONFIG_ARCH_CPU_INIT
> +
> +#define CONFIG_NR_DRAM_BANKS_MAX 2
> +
> +/* 1KHz clock tick */
> +#define CONFIG_SYS_HZ 1000
> +
> +/* UART configuration */
> +#if (CONFIG_SYS_LPC32XX_UART >= 3) && (CONFIG_SYS_LPC32XX_UART <= 6)
> +#define CONFIG_SYS_NS16550_SERIAL
> +#define CONFIG_CONS_INDEX (CONFIG_SYS_LPC32XX_UART - 2)
> +#elif (CONFIG_SYS_LPC32XX_UART == 1) || (CONFIG_SYS_LPC32XX_UART == 2)
||
> \ + (CONFIG_SYS_LPC32XX_UART == 7)
> +#define CONFIG_LPC32XX_HSUART
> +#else
> +#error "define CONFIG_SYS_LPC32XX_UART in the range from 1 to 7"
> +#endif
> +
> +#if defined(CONFIG_SYS_NS16550_SERIAL)
> +#define CONFIG_SYS_NS16550
> +
> +#define CONFIG_SYS_NS16550_REG_SIZE -4
> +#define CONFIG_SYS_NS16550_CLK get_serial_clock()
> +
> +#define CONFIG_SYS_NS16550_COM1 UART3_BASE
> +#define CONFIG_SYS_NS16550_COM2 UART4_BASE
> +#define CONFIG_SYS_NS16550_COM3 UART5_BASE
> +#define CONFIG_SYS_NS16550_COM4 UART6_BASE
> +#endif
> +
> +#if defined(CONFIG_LPC32XX_HSUART)
> +#if CONFIG_SYS_LPC32XX_UART == 1
> +#define HS_UART_BASE HS_UART1_BASE
> +#elif CONFIG_SYS_LPC32XX_UART == 2
> +#define HS_UART_BASE HS_UART2_BASE
> +#else /* CONFIG_SYS_LPC32XX_UART == 7 */
> +#define HS_UART_BASE HS_UART7_BASE
> +#endif
> +#endif
> +
> +#define CONFIG_SYS_BAUDRATE_TABLE \
> + { 9600, 19200, 38400, 57600, 115200, 230400, 460800 }
> +
> +/* NOR Flash */
> +#if defined(CONFIG_SYS_FLASH_CFI)
> +#define CONFIG_FLASH_CFI_DRIVER
> +#define CONFIG_SYS_FLASH_PROTECTION
> +#endif
> +
> +#endif /* _LPC32XX_CONFIG_H */
> diff --git a/arch/arm/include/asm/arch-lpc32xx/cpu.h
> b/arch/arm/include/asm/arch-lpc32xx/cpu.h new file mode 100644
> index 0000000..c5343c3
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-lpc32xx/cpu.h
> @@ -0,0 +1,64 @@
> +/*
> + * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301, USA.
> + */
> +
> +#ifndef _LPC32XX_CPU_H
> +#define _LPC32XX_CPU_H
> +
> +/* LPC32XX Memory map */
> +
> +/* AHB physical base addresses */
> +#define SLC_NAND_BASE 0x20020000 /* SLC NAND Flash registers base
*/
> +#define SSP0_BASE 0x20084000 /* SSP0 registers base */
> +#define SD_CARD_BASE 0x20098000 /* SD card interface registers base */
> +#define MLC_NAND_BASE 0x200A8000 /* MLC NAND Flash registers base
*/
> +#define DMA_BASE 0x31000000 /* DMA controller registers base */
> +#define USB_BASE 0x31020000 /* USB registers base */
> +#define LCD_BASE 0x31040000 /* LCD registers base */
> +#define ETHERNET_BASE 0x31060000 /* Ethernet registers base
*/
> +#define EMC_BASE 0x31080000 /* EMC configuration registers base */
> +
> +/* FAB peripherals base addresses */
> +#define CLK_PM_BASE 0x40004000 /* System control registers base */
> +#define HS_UART1_BASE 0x40014000 /* High speed UART 1 registers
base */
> +#define HS_UART2_BASE 0x40018000 /* High speed UART 2 registers
base */
> +#define HS_UART7_BASE 0x4001C000 /* High speed UART 7 registers
base */
> +#define RTC_BASE 0x40024000 /* RTC registers base */
> +#define GPIO_BASE 0x40028000 /* GPIO registers base */
> +#define WDT_BASE 0x4003C000 /* Watchdog timer registers base */
> +#define TIMER0_BASE 0x40044000 /* Timer0 registers base */
> +#define TIMER1_BASE 0x4004C000 /* Timer1 registers base */
> +#define UART_CTRL_BASE 0x40054000 /* UART control regsisters base
*/
> +
> +/* APB peripherals base addresses */
> +#define UART3_BASE 0x40080000 /* UART 3 registers base */
> +#define UART4_BASE 0x40088000 /* UART 4 registers base */
> +#define UART5_BASE 0x40090000 /* UART 5 registers base */
> +#define UART6_BASE 0x40098000 /* UART 6 registers base */
> +
> +/* External SDRAM Memory Bank base addresses */
> +#define EMC_DYCS0_BASE 0x80000000 /* SDRAM DYCS0 base address
*/
> +#define EMC_DYCS1_BASE 0xA0000000 /* SDRAM DYCS1 base address
*/
> +
> +/* External Static Memory Bank base addresses */
> +#define EMC_CS0_BASE 0xE0000000
> +#define EMC_CS1_BASE 0xE1000000
> +#define EMC_CS2_BASE 0xE2000000
> +#define EMC_CS3_BASE 0xE3000000
> +
> +#endif /* _LPC32XX_CPU_H */
> diff --git a/arch/arm/include/asm/arch-lpc32xx/emc.h
> b/arch/arm/include/asm/arch-lpc32xx/emc.h new file mode 100644
> index 0000000..feb03bd
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-lpc32xx/emc.h
> @@ -0,0 +1,92 @@
> +/*
> + * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301, USA.
> + */
> +
> +#ifndef _LPC32XX_EMC_H
> +#define _LPC32XX_EMC_H
> +
> +#include <asm/types.h>
> +
> +/* EMC Registers */
> +struct emc_regs {
> + u32 ctrl; /* Controls operation of the EMC */
> + u32 status; /* Provides EMC status information */
> + u32 config; /* Configures operation of the EMC */
> + u32 reserved0[5];
> + u32 control; /* Controls dyn memory operation */
> + u32 refresh; /* Configures dyn memory refresh operation */
> + u32 read_config; /* Configures the dyn memory read strategy */
> + u32 reserved1;
> + u32 t_rp; /* Precharge command period */
> + u32 t_ras; /* Active to precharge command period */
> + u32 t_srex; /* Self-refresh exit time */
> + u32 reserved2[2];
> + u32 t_wr; /* Write recovery time */
> + u32 t_rc; /* Active to active command period */
> + u32 t_rfc; /* Auto-refresh period */
> + u32 t_xsr; /* Exit self-refresh to active command time */
> + u32 t_rrd; /* Active bank A to active bank B latency */
> + u32 t_mrd; /* Load mode register to active command time */
> + u32 t_cdlr; /* Last data in to read command time */
> + u32 reserved3[8];
> + u32 extended_wait; /* time for static memory rd/wr transfers */
> + u32 reserved4[31];
> + u32 config0; /* Configuration information for the SDRAM */
> + u32 rascas0; /* RAS and CAS latencies for the SDRAM */
> + u32 reserved5[6];
> + u32 config1; /* Configuration information for the SDRAM */
> + u32 rascas1; /* RAS and CAS latencies for the SDRAM */
> + u32 reserved6[54];
> + struct emc_stat_t {
> + u32 config; /* Static memory configuration */
> + u32 waitwen; /* Delay from chip select to write enable */
> + u32 waitoen; /* Delay to output enable */
> + u32 waitrd; /* Delay to a read access */
> + u32 waitpage; /* Delay for async page mode read */
> + u32 waitwr; /* Delay to a write access */
> + u32 waitturn; /* Number of bus turnaround cycles */
> + u32 reserved;
> + } stat[4];
> + u32 reserved7[96];
> + struct emc_ahb_t {
> + u32 control; /* Control register for AHB */
> + u32 status; /* Status register for AHB */
> + u32 timeout; /* Timeout register for AHB */
> + u32 reserved[5];
> + } ahb[5];
> +};
> +
> +/* Static Memory Configuration Register bits */
> +#define EMC_STAT_CONFIG_WP (1 << 20)
> +#define EMC_STAT_CONFIG_EW (1 << 8)
> +#define EMC_STAT_CONFIG_PB (1 << 7)
> +#define EMC_STAT_CONFIG_PC (1 << 6)
> +#define EMC_STAT_CONFIG_PM (1 << 3)
> +#define EMC_STAT_CONFIG_32BIT (2 << 0)
> +#define EMC_STAT_CONFIG_16BIT (1 << 0)
> +#define EMC_STAT_CONFIG_8BIT (0 << 0)
> +
> +/* Static Memory Delay Registers */
> +#define EMC_STAT_WAITWEN(n) (((n) - 1) & 0x0F)
> +#define EMC_STAT_WAITOEN(n) (((n) - 1) & 0x0F)
> +#define EMC_STAT_WAITRD(n) (((n) - 1) & 0x1F)
> +#define EMC_STAT_WAITPAGE(n) (((n) - 1) & 0x1F)
> +#define EMC_STAT_WAITWR(n) (((n) - 2) & 0x1F)
> +#define EMC_STAT_WAITTURN(n) (((n) - 1) & 0x0F)
> +
> +#endif /* _LPC32XX_EMC_H */
> diff --git a/arch/arm/include/asm/arch-lpc32xx/sys_proto.h
> b/arch/arm/include/asm/arch-lpc32xx/sys_proto.h new file mode 100644
> index 0000000..b2cbfcd
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-lpc32xx/sys_proto.h
> @@ -0,0 +1,25 @@
> +/*
> + * Copyright (C) 2011 Vladimir Zapolskiy <vz at mleia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301, USA.
> + */
> +
> +#ifndef _LPC32XX_SYS_PROTO_H
> +#define _LPC32XX_SYS_PROTO_H
> +
> +void lpc32xx_uart_init(unsigned int uart_id);
> +
> +#endif /* _LPC32XX_SYS_PROTO_H */
> diff --git a/arch/arm/include/asm/arch-lpc32xx/timer.h
> b/arch/arm/include/asm/arch-lpc32xx/timer.h new file mode 100644
> index 0000000..7d63763
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-lpc32xx/timer.h
> @@ -0,0 +1,74 @@
> +/*
> + * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301, USA.
> + */
> +
> +#ifndef _LPC32XX_TIMER_H
> +#define _LPC32XX_TIMER_H
> +
> +#include <asm/types.h>
> +
> +/* Timer/Counter Registers */
> +struct timer_regs {
> + u32 ir; /* Interrupt Register */
> + u32 tcr; /* Timer Control Register */
> + u32 tc; /* Timer Counter */
> + u32 pr; /* Prescale Register */
> + u32 pc; /* Prescale Counter */
> + u32 mcr; /* Match Control Register */
> + u32 mr[4]; /* Match Registers */
> + u32 ccr; /* Capture Control Register */
> + u32 cr[4]; /* Capture Registers */
> + u32 emr; /* External Match Register */
> + u32 reserved[12];
> + u32 ctcr; /* Count Control Register */
> +};
> +
> +/* Timer/Counter Interrupt Register bits */
> +#define TIMER_IR_CR(n) (1 << ((n) + 4))
> +#define TIMER_IR_MR(n) (1 << (n))
> +
> +/* Timer/Counter Timer Control Register bits */
> +#define TIMER_TCR_COUNTER_RESET (1 << 1)
> +#define TIMER_TCR_COUNTER_ENABLE (1 << 0)
> +#define TIMER_TCR_COUNTER_DISABLE (0 << 0)
> +
> +/* Timer/Counter Match Control Register bits */
> +#define TIMER_MCR_STOP(n) (1 << (3 * (n) + 2))
> +#define TIMER_MCR_RESET(n) (1 << (3 * (n) + 1))
> +#define TIMER_MCR_INTERRUPT(n) (1 << (3 * (n)))
> +
> +/* Timer/Counter Capture Control Register bits */
> +#define TIMER_CCR_INTERRUPT(n) (1 << (3 * (n) + 2))
> +#define TIMER_CCR_FALLING_EDGE(n) (1 << (3 * (n) + 1))
> +#define TIMER_CCR_RISING_EDGE(n) (1 << (3 * (n)))
> +
> +/* Timer/Counter External Match Register bits */
> +#define TIMER_EMR_EMC_TOGGLE(n) (0x3 << (2 * (n) + 4))
> +#define TIMER_EMR_EMC_SET(n) (0x2 << (2 * (n) + 4))
> +#define TIMER_EMR_EMC_CLEAR(n) (0x1 << (2 * (n) + 4))
> +#define TIMER_EMR_EMC_NOTHING(n) (0x0 << (2 * (n) + 4))
> +#define TIMER_EMR_EM(n) (1 << (n))
> +
> +/* Timer/Counter Count Control Register bits */
> +#define TIMER_CTCR_INPUT(n) ((n) << 2)
> +#define TIMER_CTCR_MODE_COUNTER_BOTH (0x3 << 0)
> +#define TIMER_CTCR_MODE_COUNTER_FALLING (0x2 << 0)
> +#define TIMER_CTCR_MODE_COUNTER_RISING (0x1 << 0)
> +#define TIMER_CTCR_MODE_TIMER (0x0 << 0)
> +
> +#endif /* _LPC32XX_TIMER_H */
> diff --git a/arch/arm/include/asm/arch-lpc32xx/uart.h
> b/arch/arm/include/asm/arch-lpc32xx/uart.h new file mode 100644
> index 0000000..b613df8
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-lpc32xx/uart.h
> @@ -0,0 +1,54 @@
> +/*
> + * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301, USA.
> + */
> +
> +#ifndef _LPC32XX_UART_H
> +#define _LPC32XX_UART_H
> +
> +#include <asm/types.h>
> +
> +/* UART Control Registers */
> +struct uart_ctrl_regs {
> + u32 ctrl; /* Control Register */
> + u32 clkmode; /* Clock Mode Register */
> + u32 loop; /* Loopback Control Register */
> +};
> +
> +/* UART Control Register bits */
> +#define UART_CTRL_UART3_MD_CTRL (1 << 11)
> +#define UART_CTRL_HDPX_INV (1 << 10)
> +#define UART_CTRL_HDPX_EN (1 << 9)
> +#define UART_CTRL_UART6_IRDA (1 << 5)
> +#define UART_CTRL_IR_TX6_INV (1 << 4)
> +#define UART_CTRL_IR_RX6_INV (1 << 3)
> +#define UART_CTRL_IR_RX_LENGTH (1 << 2)
> +#define UART_CTRL_IR_TX_LENGTH (1 << 1)
> +#define UART_CTRL_UART5_USB_MODE (1 << 0)
> +
> +/* UART Clock Mode Register bits */
> +#define UART_CLKMODE_STATX(n) (1 << ((n) + 16))
> +#define UART_CLKMODE_STAT (1 << 14)
> +#define UART_CLKMODE_MASK(n) (0x3 << (2 * (n) - 2))
> +#define UART_CLKMODE_AUTO(n) (0x2 << (2 * (n) - 2))
> +#define UART_CLKMODE_ON(n) (0x1 << (2 * (n) - 2))
> +#define UART_CLKMODE_OFF(n) (0x0 << (2 * (n) - 2))
> +
> +/* UART Loopback Control Register bits */
> +#define UART_LOOPBACK(n) (1 << ((n) - 1))
> +
> +#endif /* _LPC32XX_UART_H */
> diff --git a/arch/arm/include/asm/arch-lpc32xx/wdt.h
> b/arch/arm/include/asm/arch-lpc32xx/wdt.h new file mode 100644
> index 0000000..133f29f
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-lpc32xx/wdt.h
> @@ -0,0 +1,51 @@
> +/*
> + * Copyright (C) 2011 by Vladimir Zapolskiy <vz at mleia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version 2
> + * of the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301, USA.
> + */
> +
> +#ifndef _LPC32XX_WDT_H
> +#define _LPC32XX_WDT_H
> +
> +#include <asm/types.h>
> +
> +/* Watchdog Timer Registers */
> +struct wdt_regs {
> + u32 isr; /* Interrupt Status Register */
> + u32 ctrl; /* Control Register */
> + u32 counter; /* Counter Value Register */
> + u32 mctrl; /* Match Control Register */
> + u32 match0; /* Match 0 Register */
> + u32 emr; /* External Match Control Register */
> + u32 pulse; /* Reset Pulse Length Register */
> + u32 res; /* Reset Source Register */
> +};
> +
> +/* Watchdog Timer Control Register bits */
> +#define WDTIM_CTRL_PAUSE_EN (1 << 2)
> +#define WDTIM_CTRL_RESET_COUNT (1 << 1)
> +#define WDTIM_CTRL_COUNT_ENAB (1 << 0)
> +
> +/* Watchdog Timer Match Control Register bits */
> +#define WDTIM_MCTRL_RESFRC2 (1 << 6)
> +#define WDTIM_MCTRL_RESFRC1 (1 << 5)
> +#define WDTIM_MCTRL_M_RES2 (1 << 4)
> +#define WDTIM_MCTRL_M_RES1 (1 << 3)
> +#define WDTIM_MCTRL_STOP_COUNT0 (1 << 2)
> +#define WDTIM_MCTRL_RESET_COUNT0 (1 << 1)
> +#define WDTIM_MCTRL_MR0_INT (1 << 0)
> +
> +#endif /* _LPC32XX_WDT_H */
More information about the U-Boot
mailing list