[U-Boot] [PATCH] i.mx: i.mx5: update imx_get_mac_from_fuse function

[Jason Liu]

FEC does not work on the i.mx51/53evk board, it will hangup
In:    serial
Out:   serial
Err:   serial
Net:

After bisect, it due to the following commit:
be252b6 net: imx: Add multi-FEC support for imx_get_mac_from_fuse
has change the imx_get_mac_from_fuse fucntion prototype, but fail
to update i.mx5, here it does it.

After apply this patch, u-boot works again on i.mx51/53 evk boards.

Signed-off-by: Jason Liu <jason.hui at linaro.org>
Cc: Stefano Babic <sbabic at denx.de>
---
 arch/arm/cpu/armv7/mx5/soc.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/cpu/armv7/mx5/soc.c b/arch/arm/cpu/armv7/mx5/soc.c
index 1533dd8..3f5a4f7 100644
--- a/arch/arm/cpu/armv7/mx5/soc.c
+++ b/arch/arm/cpu/armv7/mx5/soc.c
@@ -72,7 +72,7 @@ u32 get_cpu_rev(void)
 }
 
 #if defined(CONFIG_FEC_MXC)
-void imx_get_mac_from_fuse(unsigned char *mac)
+void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
 {
 	int i;
 	struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
-- 
1.7.4.1