[U-Boot] [PATCH 1/3] i2c: add i2c_core and prepare for new multibus support
Simon Glass
sjg at chromium.org
Tue Jan 17 08:12:23 CET 2012
From: Heiko Schocher <hs at denx.de>
This Patch introduce the new i2c_core file, which holds
the I2C core functions, for the rework of the multibus/
multiadapter support.
Also adds changes in i2c.h for the new I2C multibus/multiadapter
support. This new support can be activated with the
CONFIG_SYS_I2C define.
Signed-off-by: Heiko Schocher <hs at denx.de>
Signed-off-by: Simon Glass <sjg at chromium.org>
---
arch/arm/include/asm/global_data.h | 3 +
arch/avr32/include/asm/global_data.h | 3 +
arch/blackfin/include/asm/global_data.h | 4 +-
arch/m68k/include/asm/global_data.h | 3 +
arch/microblaze/include/asm/global_data.h | 3 +
arch/mips/include/asm/global_data.h | 3 +
arch/nios2/include/asm/global_data.h | 3 +
arch/powerpc/include/asm/global_data.h | 3 +
arch/sh/include/asm/global_data.h | 3 +
arch/sparc/include/asm/global_data.h | 3 +
arch/x86/include/asm/global_data.h | 3 +
drivers/i2c/Makefile | 1 +
drivers/i2c/i2c_core.c | 360 +++++++++++++++++++++++++++++
include/i2c.h | 199 +++++++++++++++-
14 files changed, 584 insertions(+), 10 deletions(-)
create mode 100644 drivers/i2c/i2c_core.c
diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h
index 23a6077..924cea2 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -87,6 +87,9 @@ typedef struct global_data {
unsigned long post_log_res; /* success of POST test */
unsigned long post_init_f_time; /* When post_init_f started */
#endif
+#if defined(CONFIG_SYS_I2C)
+ void *cur_adap; /* current used i2c adapter */
+#endif
} gd_t;
/*
diff --git a/arch/avr32/include/asm/global_data.h b/arch/avr32/include/asm/global_data.h
index 5c654bd..605b1a7 100644
--- a/arch/avr32/include/asm/global_data.h
+++ b/arch/avr32/include/asm/global_data.h
@@ -50,6 +50,9 @@ typedef struct global_data {
#endif
void **jt; /* jump table */
char env_buf[32]; /* buffer for getenv() before reloc. */
+#if defined(CONFIG_SYS_I2C)
+ void *cur_adap; /* current used i2c adapter */
+#endif
} gd_t;
/*
diff --git a/arch/blackfin/include/asm/global_data.h b/arch/blackfin/include/asm/global_data.h
index 67aa30f..eacfd17 100644
--- a/arch/blackfin/include/asm/global_data.h
+++ b/arch/blackfin/include/asm/global_data.h
@@ -56,9 +56,11 @@ typedef struct global_data {
unsigned long post_log_res; /* success of POST test */
unsigned long post_init_f_time; /* When post_init_f started */
#endif
-
void **jt; /* jump table */
char env_buf[32]; /* buffer for getenv() before reloc. */
+#if defined(CONFIG_SYS_I2C)
+ void *cur_adap; /* current used i2c adapter */
+#endif
} gd_t;
/*
diff --git a/arch/m68k/include/asm/global_data.h b/arch/m68k/include/asm/global_data.h
index 0ba2b43..fb171f8 100644
--- a/arch/m68k/include/asm/global_data.h
+++ b/arch/m68k/include/asm/global_data.h
@@ -68,6 +68,9 @@ typedef struct global_data {
#endif
void **jt; /* Standalone app jump table */
char env_buf[32]; /* buffer for getenv() before reloc. */
+#if defined(CONFIG_SYS_I2C)
+ void *cur_adap; /* current used i2c adapter */
+#endif
} gd_t;
/*
diff --git a/arch/microblaze/include/asm/global_data.h b/arch/microblaze/include/asm/global_data.h
index 6e8537c..a43ca0d 100644
--- a/arch/microblaze/include/asm/global_data.h
+++ b/arch/microblaze/include/asm/global_data.h
@@ -47,6 +47,9 @@ typedef struct global_data {
unsigned long fb_base; /* base address of frame buffer */
void **jt; /* jump table */
char env_buf[32]; /* buffer for getenv() before reloc. */
+#if defined(CONFIG_SYS_I2C)
+ void *cur_adap; /* current used i2c adapter */
+#endif
} gd_t;
/*
diff --git a/arch/mips/include/asm/global_data.h b/arch/mips/include/asm/global_data.h
index f6cf9fe..436c0c7 100644
--- a/arch/mips/include/asm/global_data.h
+++ b/arch/mips/include/asm/global_data.h
@@ -61,6 +61,9 @@ typedef struct global_data {
unsigned long env_valid; /* Checksum of Environment valid? */
void **jt; /* jump table */
char env_buf[32]; /* buffer for getenv() before reloc. */
+#if defined(CONFIG_SYS_I2C)
+ void *cur_adap; /* current used i2c adapter */
+#endif
} gd_t;
/*
diff --git a/arch/nios2/include/asm/global_data.h b/arch/nios2/include/asm/global_data.h
index 4b86fbd..714e2f8 100644
--- a/arch/nios2/include/asm/global_data.h
+++ b/arch/nios2/include/asm/global_data.h
@@ -42,6 +42,9 @@ typedef struct global_data {
#endif
void **jt; /* Standalone app jump table */
char env_buf[32]; /* buffer for getenv() before reloc. */
+#if defined(CONFIG_SYS_I2C)
+ void *cur_adap; /* current used i2c adapter */
+#endif
} gd_t;
/* flags */
diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h
index 01f1d4a..96f2ad8 100644
--- a/arch/powerpc/include/asm/global_data.h
+++ b/arch/powerpc/include/asm/global_data.h
@@ -184,6 +184,9 @@ typedef struct global_data {
#endif
void **jt; /* jump table */
char env_buf[32]; /* buffer for getenv() before reloc. */
+#if defined(CONFIG_SYS_I2C)
+ void *cur_adap; /* current used i2c adapter */
+#endif
} gd_t;
/*
diff --git a/arch/sh/include/asm/global_data.h b/arch/sh/include/asm/global_data.h
index 1b782fc..7b25d8f 100644
--- a/arch/sh/include/asm/global_data.h
+++ b/arch/sh/include/asm/global_data.h
@@ -42,6 +42,9 @@ typedef struct global_data
unsigned long env_valid; /* Checksum of Environment valid */
void **jt; /* Standalone app jump table */
char env_buf[32]; /* buffer for getenv() before reloc. */
+#if defined(CONFIG_SYS_I2C)
+ void *cur_adap; /* current used i2c adapter */
+#endif
} gd_t;
#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
diff --git a/arch/sparc/include/asm/global_data.h b/arch/sparc/include/asm/global_data.h
index 613e2d8..6a86b69 100644
--- a/arch/sparc/include/asm/global_data.h
+++ b/arch/sparc/include/asm/global_data.h
@@ -76,6 +76,9 @@ typedef struct global_data {
#endif
void **jt; /* jump table */
char env_buf[32]; /* buffer for getenv() before reloc. */
+#if defined(CONFIG_SYS_I2C)
+ void *cur_adap; /* current used i2c adapter */
+#endif
} gd_t;
/*
diff --git a/arch/x86/include/asm/global_data.h b/arch/x86/include/asm/global_data.h
index 05a2139..4713b41 100644
--- a/arch/x86/include/asm/global_data.h
+++ b/arch/x86/include/asm/global_data.h
@@ -55,6 +55,9 @@ typedef struct global_data {
unsigned long reset_status; /* reset status register at boot */
void **jt; /* jump table */
char env_buf[32]; /* buffer for getenv() before reloc. */
+#if defined(CONFIG_SYS_I2C)
+ void *cur_adap; /* current used i2c adapter */
+#endif
} gd_t;
extern gd_t *gd;
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index c123c72..ebedef2 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -45,6 +45,7 @@ COBJS-$(CONFIG_TEGRA2_I2C) += tegra2_i2c.o
COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
COBJS-$(CONFIG_U8500_I2C) += u8500_i2c.o
COBJS-$(CONFIG_SH_I2C) += sh_i2c.o
+COBJS-$(CONFIG_SYS_I2C) += i2c_core.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/i2c/i2c_core.c b/drivers/i2c/i2c_core.c
new file mode 100644
index 0000000..139f4c9
--- /dev/null
+++ b/drivers/i2c/i2c_core.c
@@ -0,0 +1,360 @@
+/*
+ * Copyright (C) 2009 Sergey Kubushyn <ksi at koi8.net>
+ *
+ * Multibus/multiadapter I2C core functions (wrappers)
+ */
+#include <common.h>
+#include <i2c.h>
+
+#ifdef CONFIG_TEGRA2_I2C
+extern struct i2c_adapter tegra_i2c_adap[];
+#endif
+
+struct i2c_adapter *i2c_adap[CONFIG_SYS_NUM_I2C_ADAPTERS] =
+ CONFIG_SYS_I2C_ADAPTERS;
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+struct i2c_bus i2c_bus[CONFIG_SYS_NUM_I2C_BUSSES] = CONFIG_SYS_I2C_BUSSES;
+#endif
+
+static unsigned int i2c_cur_bus __attribute__((section(".data"))) =
+ CONFIG_SYS_SPD_BUS_NUM;
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void i2c_reloc_fixup(void)
+{
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
+ int i;
+ unsigned long addr;
+
+ for (i = 0; i < CONFIG_SYS_NUM_I2C_ADAPTERS; i++) {
+ /* Adapter itself */
+ addr = (unsigned long)i2c_adap[i];
+ if (addr != 0)
+ addr += gd->reloc_off;
+
+ i2c_adap[i] = (struct i2c_adapter *)addr;
+ /* i2c_init() */
+ addr = (unsigned long)i2c_adap[i]->init;
+ if (addr != 0)
+ addr += gd->reloc_off;
+
+ i2c_adap[i]->init = (void (*)(int, int))addr;
+ /* i2c_probe() */
+ addr = (unsigned long)i2c_adap[i]->probe;
+ if (addr != 0)
+ addr += gd->reloc_off;
+
+ i2c_adap[i]->probe = (int (*)(u_int8_t))addr;
+ /* i2c_read() */
+ addr = (unsigned long)i2c_adap[i]->read;
+ if (addr != 0)
+ addr += gd->reloc_off;
+
+ i2c_adap[i]->read = (int (*)(u_int8_t, uint, int, u_int8_t *,
+ int))addr;
+ /* i2c_write() */
+ addr = (unsigned long)i2c_adap[i]->write;
+ if (addr != 0)
+ addr += gd->reloc_off;
+
+ i2c_adap[i]->write = (int (*)(u_int8_t, uint, int, u_int8_t *,
+ int))addr;
+ /* i2c_set_bus_speed() */
+ addr = (unsigned long)i2c_adap[i]->set_bus_speed;
+ if (addr != 0)
+ addr += gd->reloc_off;
+
+ i2c_adap[i]->set_bus_speed = (uint (*)(uint))addr;
+ /* name */
+ addr = (unsigned long)i2c_adap[i]->name;
+ if (addr != 0)
+ addr += gd->reloc_off;
+
+ i2c_adap[i]->name = (char *)addr;
+ }
+ gd->cur_adap += gd->reloc_off;
+#else
+ /*
+ * we need this here to set after relocation gd->cur_adap
+ * to the new relocated value.
+ */
+ gd->cur_adap = NULL;
+ i2c_set_bus_num(i2c_cur_bus);
+#endif
+}
+
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+/*
+ * i2c_mux_set()
+ * -------------
+ *
+ * This turns on the given channel on I2C multiplexer chip connected to
+ * a given I2C adapter directly or via other multiplexers. In the latter
+ * case the entire multiplexer chain must be initialized first starting
+ * with the one connected directly to the adapter. When disabling a chain
+ * muxes must be programmed in reverse order, starting with the one
+ * farthest from the adapter.
+ *
+ * mux_id is the multiplexer chip type from defined in i2c.h. So far only
+ * NXP (Philips) PCA954x multiplexers are supported. Switches are NOT
+ * supported (anybody uses them?)
+ */
+
+static int i2c_mux_set(int adapter, int mux_id, int chip, int channel)
+{
+ u_int8_t buf;
+
+ /* channel < 0 - turn off the mux */
+ if (channel < 0) {
+ buf = 0;
+ return i2c_adap[adapter]->write(chip, 0, 0, &buf, 1);
+ }
+
+ switch (mux_id) {
+ case I2C_MUX_PCA9540_ID:
+ case I2C_MUX_PCA9542_ID:
+ if (channel > 1)
+ return -1;
+ buf = (u_int8_t)((channel & 0x01) | (1 << 2));
+ break;
+ case I2C_MUX_PCA9544_ID:
+ if (channel > 3)
+ return -1;
+ buf = (u_int8_t)((channel & 0x03) | (1 << 2));
+ break;
+ case I2C_MUX_PCA9547_ID:
+ if (channel > 7)
+ return -1;
+ buf = (u_int8_t)((channel & 0x07) | (1 << 3));
+ break;
+ default:
+ return -1;
+ }
+
+ return i2c_adap[adapter]->write(chip, 0, 0, &buf, 1);
+}
+#endif
+
+/*
+ * i2c_init_bus():
+ * ---------------
+ *
+ * Initializes one bus. Will initialize the parent adapter. No current bus
+ * changes, no mux (if any) setup.
+ */
+static void i2c_init_bus(unsigned int bus_no, int speed, int slaveaddr)
+{
+ if (bus_no >= CONFIG_SYS_NUM_I2C_BUSSES)
+ return;
+
+ I2C_ADAP->init(speed, slaveaddr);
+
+ if (gd->flags & GD_FLG_RELOC) {
+ I2C_ADAP->init_done = 1;
+ I2C_ADAP->speed = speed;
+ I2C_ADAP->slaveaddr = slaveaddr;
+ }
+}
+
+/*
+ * i2c_init_all():
+ *
+ * not longer needed, will deleted. Actual init the SPD_BUS
+ * for compatibility.
+ * i2c_adap[] must be initialized beforehead with function pointers and
+ * data, including speed and slaveaddr.
+ */
+void i2c_init_all(void)
+{
+ i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM);
+ return;
+}
+
+/*
+ * i2c_get_bus_num():
+ * ------------------
+ *
+ * Returns index of currently active I2C bus. Zero-based.
+ */
+unsigned int i2c_get_bus_num(void)
+{
+ return i2c_cur_bus;
+}
+
+/*
+ * i2c_set_bus_num():
+ * ------------------
+ *
+ * Change the active I2C bus. Subsequent read/write calls will
+ * go to this one. Sets all of the muxes in a proper condition
+ * if that bus is behind muxes.
+ * If previously selected bus is behind the muxes turns off all the
+ * muxes along the path to that bus.
+ *
+ * bus - bus index, zero based
+ *
+ * Returns: 0 on success, not 0 on failure
+ */
+int i2c_set_bus_num(unsigned int bus)
+{
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+ int i;
+ u_int8_t buf;
+#endif
+
+ if (bus >= CONFIG_SYS_NUM_I2C_BUSSES)
+ return -1;
+
+ if (gd->cur_adap == NULL)
+ gd->cur_adap = I2C_ADAP_NR(bus);
+ else if ((bus == i2c_cur_bus) &&
+ (I2C_ADAP->init_done > 0))
+ return 0;
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+ else {
+ /* Disconnect current bus (turn off muxes if any) */
+ if ((i2c_bus[i2c_cur_bus].next_hop[0].chip != 0) &&
+ (I2C_ADAP->init_done != 0)) {
+ i = CONFIG_SYS_I2C_MAX_HOPS;
+ do {
+ u_int8_t chip;
+
+ chip = i2c_bus[i2c_cur_bus].next_hop[--i].chip;
+ if (chip == 0)
+ continue;
+
+ I2C_ADAP->write(chip, 0, 0, &buf, 1);
+ } while (i > 0);
+ }
+ }
+#endif
+
+ gd->cur_adap = I2C_ADAP_NR(bus);
+ if (I2C_ADAP->init_done == 0)
+ i2c_init_bus(bus, I2C_ADAP->speed, I2C_ADAP->slaveaddr);
+
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+ /* Connect requested bus if behind muxes */
+ if (i2c_bus[bus].next_hop[0].chip != 0) {
+
+ /* Set all muxes along the path to that bus */
+ for (i = 0; i < CONFIG_SYS_I2C_MAX_HOPS; i++) {
+ int ret;
+
+ if (i2c_bus[bus].next_hop[i].chip == 0)
+ break;
+
+ ret = i2c_mux_set(i2c_bus[bus].adapter,
+ i2c_bus[bus].next_hop[i].mux.id,
+ i2c_bus[bus].next_hop[i].chip,
+ i2c_bus[bus].next_hop[i].channel);
+ if (ret != 0) {
+ printf("%s: could not set mux: id: %d "\
+ "chip: %x channel: %d\n", __func__,
+ i2c_bus[bus].next_hop[i].mux.id,
+ i2c_bus[bus].next_hop[i].chip,
+ i2c_bus[bus].next_hop[i].channel);
+
+ }
+ }
+ }
+#endif
+
+ i2c_cur_bus = bus;
+ return 0;
+}
+
+/*
+ * Probe the given I2C chip address. Returns 0 if a chip responded,
+ * not 0 on failure.
+ */
+int i2c_probe(u_int8_t chip)
+{
+ return I2C_ADAP->probe(chip);
+}
+
+/*
+ * Read/Write interface:
+ * chip: I2C chip address, range 0..127
+ * addr: Memory (register) address within the chip
+ * alen: Number of bytes to use for addr (typically 1, 2 for larger
+ * memories, 0 for register type devices with only one
+ * register)
+ * buffer: Where to read/write the data
+ * len: How many bytes to read/write
+ *
+ * Returns: 0 on success, not 0 on failure
+ */
+int i2c_read(u_int8_t chip, unsigned int addr, int alen,
+ u_int8_t *buffer, int len)
+{
+ return I2C_ADAP->read(chip, addr, alen, buffer, len);
+}
+
+int i2c_write(u_int8_t chip, unsigned int addr, int alen,
+ u_int8_t *buffer, int len)
+{
+ return I2C_ADAP->write(chip, addr, alen, buffer, len);
+}
+
+unsigned int i2c_set_bus_speed(unsigned int speed)
+{
+ unsigned int ret;
+
+ if (I2C_ADAP->set_bus_speed == NULL)
+ return 0;
+ ret = I2C_ADAP->set_bus_speed(speed);
+ if (gd->flags & GD_FLG_RELOC)
+ I2C_ADAP->speed = ret;
+
+ return ret;
+}
+
+unsigned int i2c_get_bus_speed(void)
+{
+ struct i2c_adapter *cur = I2C_ADAP;
+ return cur->speed;
+}
+
+u_int8_t i2c_reg_read(u_int8_t addr, u_int8_t reg)
+{
+ u_int8_t buf;
+
+#ifdef CONFIG_8xx
+ /* MPC8xx needs this. Maybe one day we can get rid of it. */
+ /* maybe it is now the time for it ... */
+ i2c_set_bus_num(i2c_cur_bus);
+#endif
+ i2c_read(addr, reg, 1, &buf, 1);
+
+#ifdef DEBUG
+ printf("%s: bus=%d addr=0x%02x, reg=0x%02x, val=0x%02x\n",
+ __func__, i2c_cur_bus, addr, reg, buf);
+#endif
+
+ return buf;
+}
+
+void i2c_reg_write(u_int8_t addr, u_int8_t reg, u_int8_t val)
+{
+#ifdef CONFIG_8xx
+ /* MPC8xx needs this. Maybe one day we can get rid of it. */
+ /* maybe it is now the time for it ... */
+ i2c_set_bus_num(i2c_cur_bus);
+#endif
+
+#ifdef DEBUG
+ printf("%s: bus=%d addr=0x%02x, reg=0x%02x, val=0x%02x\n",
+ __func__, i2c_cur_bus, addr, reg, val);
+#endif
+
+ i2c_write(addr, reg, 1, &val, 1);
+}
+
+void __i2c_init(int speed, int slaveaddr)
+{
+ i2c_init_bus(i2c_cur_bus, speed, slaveaddr);
+}
+void i2c_init(int speed, int slaveaddr)
+ __attribute__((weak, alias("__i2c_init")));
diff --git a/include/i2c.h b/include/i2c.h
index ee31034..910552d 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -1,4 +1,8 @@
/*
+ * Copyright (C) 2009 Sergey Kubushyn <ksi at koi8.net>
+ * Copyright (C) 2009 Heiko Schocher <hs at denx.de>
+ * Changes for multibus/multiadapter I2C support.
+ *
* (C) Copyright 2001
* Gerald Van Baren, Custom IDEAS, vanbaren at cideas.com.
*
@@ -46,16 +50,20 @@
*/
#define I2C_RXTX_LEN 128 /* maximum tx/rx buffer length */
-#ifdef CONFIG_I2C_MULTI_BUS
-#define MAX_I2C_BUS 2
-#define I2C_MULTI_BUS 1
-#else
-#define MAX_I2C_BUS 1
-#define I2C_MULTI_BUS 0
+#ifndef CONFIG_SYS_NUM_I2C_ADAPTERS
+#define CONFIG_SYS_NUM_I2C_ADAPTERS 1
#endif
-#if !defined(CONFIG_SYS_MAX_I2C_BUS)
-#define CONFIG_SYS_MAX_I2C_BUS MAX_I2C_BUS
+#if !defined(CONFIG_SYS_I2C_MAX_HOPS) || (CONFIG_SYS_I2C_MAX_HOPS == 0)
+#define CONFIG_SYS_I2C_DIRECT_BUS 1
+#if !defined(CONFIG_SYS_NUM_I2C_BUSSES)
+#define CONFIG_SYS_NUM_I2C_BUSSES CONFIG_SYS_NUM_I2C_ADAPTERS
+#endif
+#else
+#undef CONFIG_SYS_I2C_DIRECT_BUS
+#ifndef CONFIG_SYS_NUM_I2C_BUSSES
+#define CONFIG_SYS_NUM_I2C_BUSSES 1
+#endif
#endif
/* define the I2C bus number for RTC and DTT if not already done */
@@ -69,6 +77,65 @@
#define CONFIG_SYS_SPD_BUS_NUM 0
#endif
+struct i2c_adapter {
+ void (*init)(int speed, int slaveaddr);
+ int (*probe)(u_int8_t chip);
+ int (*read)(u_int8_t chip, uint addr, int alen,
+ u_int8_t *buffer, int len);
+ int (*write)(u_int8_t chip, uint addr, int alen,
+ u_int8_t *buffer, int len);
+ uint (*set_bus_speed)(uint speed);
+
+ int speed;
+ int slaveaddr;
+ int init_done;
+ int hwadapnr;
+ char *name;
+};
+
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+#define I2C_ADAP_NR(bus) i2c_adap[i2c_bus[(bus)].adapter]
+#else
+#define I2C_ADAP_NR(bus) i2c_adap[bus]
+#endif
+#define I2C_ADAP ((struct i2c_adapter *)gd->cur_adap)
+
+#define I2C_ADAP_HWNR (I2C_ADAP->hwadapnr)
+
+#ifndef CONFIG_SYS_I2C_DIRECT_BUS
+#define I2C_MUX_PCA9540_ID 1
+#define I2C_MUX_PCA9540 {I2C_MUX_PCA9540_ID, "PCA9540B"}
+#define I2C_MUX_PCA9542_ID 2
+#define I2C_MUX_PCA9542 {I2C_MUX_PCA9542_ID, "PCA9542A"}
+#define I2C_MUX_PCA9544_ID 3
+#define I2C_MUX_PCA9544 {I2C_MUX_PCA9544_ID, "PCA9544A"}
+#define I2C_MUX_PCA9547_ID 4
+#define I2C_MUX_PCA9547 {I2C_MUX_PCA9547_ID, "PCA9547A"}
+
+struct i2c_mux {
+ int id;
+ char name[16];
+};
+
+struct i2c_next_hop {
+ i2c_mux_t mux;
+ u_int8_t chip;
+ u_int8_t channel;
+};
+
+struct i2c_bus_hose {
+ int adapter;
+ i2c_next_hop_t next_hop[CONFIG_SYS_I2C_MAX_HOPS];
+};
+
+#define I2C_NULL_HOP {{-1, ""}, 0, 0}
+
+extern i2c_bus_t i2c_bus[];
+#endif
+
+extern struct i2c_adapter *i2c_adap[];
+extern struct i2c_adapter *cur_adap_nr;
+
#ifndef I2C_SOFT_DECLARATIONS
# if defined(CONFIG_MPC8260)
# define I2C_SOFT_DECLARATIONS volatile ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, I2C_PORT);
@@ -108,7 +175,7 @@
* repeatedly to change the speed and slave addresses.
*/
void i2c_init(int speed, int slaveaddr);
-void i2c_init_board(void);
+int i2c_init_board(void);
#ifdef CONFIG_SYS_I2C_BOARD_LATE_INIT
void i2c_board_late_init(void);
#endif
@@ -134,6 +201,104 @@ int i2x_mux_select_mux(int bus);
int i2c_mux_ident_muxstring_f (uchar *buf);
#endif
+#ifdef CONFIG_SYS_I2C
+/*
+ * Initialization, must be called once on start up, may be called
+ * repeatedly to change the speed and slave addresses.
+ */
+void i2c_init(unsigned int speed, int slaveaddr);
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
+void i2c_init_board(void);
+#endif
+
+/*
+ * i2c_get_bus_num:
+ *
+ * Returns index of currently active I2C bus. Zero-based.
+ */
+unsigned int i2c_get_bus_num(void);
+
+/*
+ * i2c_set_bus_num:
+ *
+ * Change the active I2C bus. Subsequent read/write calls will
+ * go to this one.
+ *
+ * bus - bus index, zero based
+ *
+ * Returns: 0 on success, not 0 on failure
+ *
+ */
+int i2c_set_bus_num(unsigned int bus);
+
+/*
+ * i2c_init_all():
+ *
+ * Initializes all I2C adapters in the system. All i2c_adap structures must
+ * be initialized beforehead with function pointers and data, including
+ * speed and slaveaddr. Returns 0 on success, non-0 on failure.
+ */
+void i2c_init_all(void);
+
+/*
+ * Probe the given I2C chip address. Returns 0 if a chip responded,
+ * not 0 on failure.
+ */
+int i2c_probe(u_int8_t chip);
+
+/*
+ * Read/Write interface:
+ * chip: I2C chip address, range 0..127
+ * addr: Memory (register) address within the chip
+ * alen: Number of bytes to use for addr (typically 1, 2 for larger
+ * memories, 0 for register type devices with only one
+ * register)
+ * buffer: Where to read/write the data
+ * len: How many bytes to read/write
+ *
+ * Returns: 0 on success, not 0 on failure
+ */
+int i2c_read(u_int8_t chip, unsigned int addr, int alen,
+ u_int8_t *buffer, int len);
+
+int i2c_write(u_int8_t chip, unsigned int addr, int alen,
+ u_int8_t *buffer, int len);
+
+/*
+ * Utility routines to read/write registers.
+ */
+u_int8_t i2c_reg_read(u_int8_t addr, u_int8_t reg);
+
+void i2c_reg_write(u_int8_t addr, u_int8_t reg, u_int8_t val);
+
+/*
+ * i2c_set_bus_speed:
+ *
+ * Change the speed of the active I2C bus
+ *
+ * speed - bus speed in Hz
+ *
+ * Returns: new bus speed
+ *
+ */
+unsigned int i2c_set_bus_speed(unsigned int speed);
+
+/*
+ * i2c_get_bus_speed:
+ *
+ * Returns speed of currently active I2C bus in Hz
+ */
+
+unsigned int i2c_get_bus_speed(void);
+
+/*
+ * i2c_reloc_fixup:
+ *
+ * Adjusts I2C pointers after U-Boot is relocated to DRAM
+ */
+void i2c_reloc_fixup(void);
+#else
+
/*
* Probe the given I2C chip address. Returns 0 if a chip responded,
* not 0 on failure.
@@ -235,6 +400,22 @@ int i2c_set_bus_speed(unsigned int);
*/
unsigned int i2c_get_bus_speed(void);
+#endif /* CONFIG_SYS_I2C */
+
+/*
+ * only for backwardcompatibility, should go away if we switched
+ * completely to new multibus support.
+ */
+#if (CONFIG_SYS_NUM_I2C_BUSSES > 1) || defined(CONFIG_I2C_MULTI_BUS)
+# if !defined(CONFIG_SYS_MAX_I2C_BUS)
+# define CONFIG_SYS_MAX_I2C_BUS 2
+# endif
+# define I2C_MULTI_BUS 0
+#else
+# define CONFIG_SYS_MAX_I2C_BUS 1
+# define I2C_MULTI_BUS 0
+#endif
+
/* NOTE: These two functions MUST be always_inline to avoid code growth! */
static inline unsigned int I2C_GET_BUS(void) __attribute__((always_inline));
--
1.7.7.3
More information about the U-Boot
mailing list