[U-Boot] [PATCH v2] Add support for MMC to fw_printenv/setenv
Christian Daudt
csd_b at daudt.org
Fri Jan 6 01:30:57 CET 2012
Changes from previous:
- Changed // to /* */
- Ran through checkpatch.pl, cleaned up a number of line-too-big and
extra space in the code that was shifted due to being in the new 'if'.
Thanks,
csd
Subject: [PATCH] Add support for MMC to fw_printenv/setenv
This patch checks if the fd is MTD and if not (using an MTD-specific IOCTL)
and skips the flash unlock/erase/lock sequence if it is not MTD.
- fd_is_mtd function added to determine MTD/MMC
- flash_write_block made to not try MTD operations if mtd_type == MTD_ABSENT
- flash_read works with MMC devices now.
Signed-off-by: Christian Daudt <csd at broadcom.com>
---
tools/env/fw_env.c | 103 ++++++++++++++++++++++++++++++++++++----------------
1 files changed, 71 insertions(+), 32 deletions(-)
diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c
index 996682e..c760429 100644
--- a/tools/env/fw_env.c
+++ b/tools/env/fw_env.c
@@ -211,6 +211,27 @@ static int flash_io (int mode);
static char *envmatch (char * s1, char * s2);
static int parse_config (void);
+
+/*
+ * Returns 1 if it is MTD and 0 if it is not MTD
+ */
+static int fd_is_mtd(int fd)
+{
+ struct mtd_info_user mtdinfo;
+ int rc;
+
+ rc = ioctl(fd, MEMGETINFO, &mtdinfo);
+ if (rc < 0) {
+ /* Failed MEMGETINFO, not MTD */
+ return 0;
+ } else {
+ /* Succeeded, MTD */
+ return 1;
+ }
+}
+
+
+
#if defined(CONFIG_FILE)
static int get_config (char *);
#endif
@@ -836,31 +857,35 @@ static int flash_write_buf (int dev, int fd,
void *buf, size_t count,
/* This only runs once on NOR flash and SPI-dataflash */
while (processed < write_total) {
- rc = flash_bad_block (fd, mtd_type, &blockstart);
- if (rc < 0) /* block test failed */
- return rc;
+ if (mtd_type != MTD_ABSENT) {
+ rc = flash_bad_block(fd, mtd_type, &blockstart);
+ if (rc < 0) /* block test failed */
+ return rc;
- if (blockstart + erasesize > top_of_range) {
- fprintf (stderr, "End of range reached, aborting\n");
- return -1;
- }
+ if (blockstart + erasesize > top_of_range) {
+ fprintf(stderr,
+ "End of range reached, aborting\n");
+ return -1;
+ }
- if (rc) { /* block is bad */
- blockstart += blocklen;
- continue;
- }
+ if (rc) { /* block is bad */
+ blockstart += blocklen;
+ continue;
+ }
- erase.start = blockstart;
- ioctl (fd, MEMUNLOCK, &erase);
+ erase.start = blockstart;
+ ioctl(fd, MEMUNLOCK, &erase);
- /* Dataflash does not need an explicit erase cycle */
- if (mtd_type != MTD_DATAFLASH)
- if (ioctl (fd, MEMERASE, &erase) != 0) {
- fprintf (stderr, "MTD erase error on %s: %s\n",
- DEVNAME (dev),
- strerror (errno));
- return -1;
- }
+ /* Dataflash does not need an explicit erase cycle */
+ if (mtd_type != MTD_DATAFLASH)
+ if (ioctl(fd, MEMERASE, &erase) != 0) {
+ fprintf(stderr,
+ "MTD erase error on %s: %s\n",
+ DEVNAME(dev),
+ strerror(errno));
+ return -1;
+ }
+ }
if (lseek (fd, blockstart, SEEK_SET) == -1) {
fprintf (stderr,
@@ -878,7 +903,8 @@ static int flash_write_buf (int dev, int fd, void
*buf, size_t count,
return -1;
}
- ioctl (fd, MEMLOCK, &erase);
+ if (mtd_type != MTD_ABSENT)
+ ioctl(fd, MEMLOCK, &erase);
processed += blocklen;
block_seek = 0;
@@ -964,18 +990,31 @@ static int flash_read (int fd)
{
struct mtd_info_user mtdinfo;
int rc;
+ int is_mtd;
- rc = ioctl (fd, MEMGETINFO, &mtdinfo);
- if (rc < 0) {
- perror ("Cannot get MTD information");
- return -1;
- }
+ is_mtd = fd_is_mtd(fd);
- if (mtdinfo.type != MTD_NORFLASH &&
- mtdinfo.type != MTD_NANDFLASH &&
- mtdinfo.type != MTD_DATAFLASH) {
- fprintf (stderr, "Unsupported flash type %u\n", mtdinfo.type);
- return -1;
+ if (is_mtd) {
+ rc = ioctl(fd, MEMGETINFO, &mtdinfo);
+ if (rc < 0) {
+ perror("Cannot get MTD information");
+ return -1;
+ }
+
+ if (mtdinfo.type != MTD_NORFLASH &&
+ mtdinfo.type != MTD_NANDFLASH &&
+ mtdinfo.type != MTD_DATAFLASH) {
+ fprintf(stderr, "Unsupported flash type %u\n",
+ mtdinfo.type);
+ return -1;
+ }
+ } else {
+ /*
+ * Kinda hacky assuming !MTD means == MMC
+ * but seems to be the easiest way to
+ * determine that.
+ */
+ mtdinfo.type = MTD_ABSENT;
}
DEVTYPE(dev_current) = mtdinfo.type;
--
1.7.1
More information about the U-Boot
mailing list