[U-Boot] [PATCH v2] arm,davinci: update for enbw_cmc board

[Tom Rini]

On Sun, Jul 1, 2012 at 9:53 PM, Heiko Schocher <hs at denx.de> wrote:
> Hello Tom,
>
> On 15.05.2012 08:24, Heiko Schocher wrote:
>>
>> - change gpio pin settings:
>>
>>    - gpio pin 6[13] (PLC reset) default value low
>>    - gpio pin 6[0] (TPM reset) default value low
>>    - 4 new GPIO pins
>>        pin  i/o   name
>>      - 3[9] input Board Type
>>      - 2[7] input HW-ID0
>>      - 2[6] input HW-ID1
>>      - 2[3] input HW-ID2
>>
>> - read board type and hw id from gpio pins on the enbw_cmc board,
>>    and use board type for setting up different gpio pin settings.
>>
>> - do not pass "davinci_mmc.use_dma=0" to linux, as MMC now
>>    works with DMA.
>>
>> - update logbuf support:
>>    store post word in RTC scratch register
>>
>> - add support for configuring KSZ8864RMN switch through
>>    a config file on u-boot startup. For more infos see:
>>    doc/README.switch_config
>>
>> Signed-off-by: Heiko Schocher<hs at denx.de>
>> Cc: Wolfgang Denk<wd at denx.de>
>> Cc: Tom Rini<tom.rini at gmail.com>
>> Cc: Christian Riesch<christian.riesch at omicron.at>
>> Cc: Sandeep Paulraj<s-paulraj at ti.com>
>>
>> ---
>> changes for v2:
>> - add comment from Tom Rini:
>>    remove ELDK-4.2 compiler warning:
>>    enbw_cmc.c: In function 'enbw_cmc_getvalue':
>>    enbw_cmc.c:447: warning: dereferencing type-punned pointer will break
>> strict-aliasing rules
>>
>> $ ./tools/checkpatch.pl 0001-arm-davinci-update-for-enbw_cmc-board.patch
>> total: 0 errors, 0 warnings, 498 lines checked
>>
>> NOTE: Ignored message types: COMPLEX_MACRO CONSIDER_KSTRTO MINMAX
>> MULTISTATEMENT_MACRO_USE_DO_WHILE
>>
>> 0001-arm-davinci-update-for-enbw_cmc-board.patch has no obvious style
>> problems and is ready for submission.
>
>
> Tom? Are there more issues with this patch?

Currently sitting in u-boot-arm/master I believe.

-- 
Tom