July 2012 Archives by date
Starting: Sun Jul 1 01:29:20 CEST 2012
Ending: Tue Jul 31 23:20:03 CEST 2012
Messages: 2436
- [U-Boot] [PATCH] powerpc/mpc83xx: increment malloc heap size
Kim Phillips
- [U-Boot] Modifying IP&mac address
Ran Shalit
- [U-Boot] [PATCH v5] AT91SAM9*: Change kernel address in dataflash to match u-boot's size
Andreas Bießmann
- [U-Boot] [PATCH] cfb_console: Add support for some ANSI terminal escape codes
Pali Rohár
- [U-Boot] [PATCH 1/2] microblaze: expand and correct configuration comments
Stephan Linz
- [U-Boot] [PATCH 2/2] microblaze: move ENV onto top of flash
Stephan Linz
- [U-Boot] Is it possible to boot the U-boot from the another U-boot from the flash area
Ishwar Saunshi
- [U-Boot] [PATCH v3 1/3] AM335x : Add USB support for AM335x in u-boot
Harman Sohanpal
- [U-Boot] Pull request: u-boot-sh/master
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] video: support exynos fimd driver for various exynos series
Donghwa Lee
- [U-Boot] [PATCH v2] arm : Atmel : add at91sam9x5ek board support
Bo Shen
- [U-Boot] [PATCH v2] arm,davinci: update for enbw_cmc board
Heiko Schocher
- [U-Boot] ARM CONFIG_OF_CONTROL status
Michal Simek
- [U-Boot] [PATCH 2/2] microblaze: move ENV onto top of flash
Michal Simek
- [U-Boot] [PATCH 1/2] microblaze: expand and correct configuration comments
Michal Simek
- [U-Boot] [PATCH] microblaze: add missing undefs for UBI and UBIFS
Michal Simek
- [U-Boot] i.mx28 can't power off in imx-boot
alex
- [U-Boot] [PATCH v2] arm : Atmel : add at91sam9x5ek board support
Andreas Bießmann
- [U-Boot] i.MX6Q SabreLite: Ethernet does not work at Gigabit speed
Wolfgang Grandegger
- [U-Boot] [PATCH v2] arm : Atmel : add at91sam9x5ek board support
Bo Shen
- [U-Boot] [PATCH v2 0/3] Bug fixes for LaCie devices
Simon Guinot
- [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2] arm : Atmel : add at91sam9x5ek board support
Andreas Bießmann
- [U-Boot] [PATCH 04/10 V4] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0
Joonyoung Shim
- [U-Boot] [PATCH 08/10 V4] EXYNOS5: CLOCK: Add BPLL support
Joonyoung Shim
- [U-Boot] [PATCH 07/10 V4] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0
Joonyoung Shim
- [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available
Måns Rullgård
- [U-Boot] [PATCH v2] arm : Atmel : add at91sam9x5ek board support
Nicolas Ferre
- [U-Boot] [PATCH 09/10 V4] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0
Joonyoung Shim
- [U-Boot] [PATCH v2] arm : Atmel : add at91sam9x5ek board support
Andreas Bießmann
- [U-Boot] [PATCH v2] arm : Atmel : add at91sam9x5ek board support
Nicolas Ferre
- [U-Boot] [PATCH 08/10 V4] EXYNOS5: CLOCK: Add BPLL support
Minkyu Kang
- [U-Boot] [PATCH v2] arm : Atmel : add at91sam9x5ek board support
Andreas Bießmann
- [U-Boot] [PATCH 0/8] video: support newly exynos5 display feature
Donghwa Lee
- [U-Boot] [PATCH 1/8] EXYNOS5: support exynos5 lcd clock control
Donghwa Lee
- [U-Boot] [PATCH 2/8] EXYNOS5: support display system register control
Donghwa Lee
- [U-Boot] [PATCH 3/8] EXYNOS5: support display port phy control function
Donghwa Lee
- [U-Boot] [PATCH 4/8] EXYNOS5: add display port base address
Donghwa Lee
- [U-Boot] [PATCH 5/8] video: support exynos display port drivers
Donghwa Lee
- [U-Boot] [PATCH 6/8] video: add dp_enabled variable in vidinfo structure
Donghwa Lee
- [U-Boot] [PATCH 7/8] video: exynos fb driver supports display port feature
Donghwa Lee
- [U-Boot] [PATCH 8/8] video: support exynos pwm backlight driver
Donghwa Lee
- [U-Boot] [PATCH] video: fixed exynos_mipi_dsi_init() declaration
Donghwa Lee
- [U-Boot] [PATCH 00/10 V5] EXYNOS5: Support for Exynos5250 Rev 1.0
Rajeshwari Shinde
- [U-Boot] [PATCH 01/10 V5] ARCH: SPL: Add parametric board initializer
Rajeshwari Shinde
- [U-Boot] [PATCH 02/10 V5] SMDK5250: SPL: Define parametric board initializer
Rajeshwari Shinde
- [U-Boot] [PATCH 03/10 V5] SMDK5250: Add smdk5250-uboot-spl.lds
Rajeshwari Shinde
- [U-Boot] [PATCH 04/10 V5] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0
Rajeshwari Shinde
- [U-Boot] [PATCH 05/10 V5] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0
Rajeshwari Shinde
- [U-Boot] [PATCH 06/10 V5] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0
Rajeshwari Shinde
- [U-Boot] [PATCH 07/10 V5] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0
Rajeshwari Shinde
- [U-Boot] [PATCH 08/10 V5] EXYNOS5: CLOCK: Add BPLL support
Rajeshwari Shinde
- [U-Boot] [PATCH 09/10 V5] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0
Rajeshwari Shinde
- [U-Boot] [PATCH 10/10 V5] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0
Rajeshwari Shinde
- [U-Boot] [PATCH v6] AT91SAM9*: Change kernel address in dataflash to match u-boot's size
Alexandre Belloni
- [U-Boot] [PATCH v6] AT91SAM9*: Change kernel address in dataflash to match u-boot's size
Andreas Bießmann
- [U-Boot] i.mx28 can't power off in imx-boot
Marek Vasut
- [U-Boot] [PATCH] cm-t35: fix incorrect NAND_ECC layout selection
Nikita Kiryanov
- [U-Boot] [PATCH v6] AT91SAM9*: Change kernel address in dataflash to match u-boot's size
Alexandre Belloni
- [U-Boot] [PATCH v6] AT91SAM9*: Change kernel address in dataflash to match u-boot's size
Andreas Bießmann
- [U-Boot] [PATCH] beagle: make get_expansion_id(), get_board_revision(), beagle_display_init() static
Peter Meerwald
- [U-Boot] [PATCH] beagle: fix termination of buddy env setting
Peter Meerwald
- [U-Boot] [PATCH v6] AT91SAM9*: Change kernel address in dataflash to match u-boot's size
Alexandre Belloni
- [U-Boot] [PATCH v7] AT91SAM9*: Change kernel address in dataflash to match u-boot's size
Alexandre Belloni
- [U-Boot] [PATCH v7] AT91SAM9*: Change kernel address in dataflash to match u-boot's size
Andreas Bießmann
- [U-Boot] [PATCH] doc/git-mailrc: update at91 and avr32
Andreas Bießmann
- [U-Boot] [PATCH v4 0/3] AM335x: Add USB support in u-boot.
Tom Rini
- [U-Boot] [PATCH v2] arm,davinci: update for enbw_cmc board
Tom Rini
- [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available
Lucas Stach
- [U-Boot] [PATCH] cm-t35: fix incorrect NAND_ECC layout selection
Tom Rini
- [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available
Måns Rullgård
- [U-Boot] [PATCH] mx28evk: Fix boot by adjusting HW_DRAM_CTL29 register
Stefano Babic
- [U-Boot] [PATCH] i.MX6 USDHC: Use the ESDHC clock
Stefano Babic
- [U-Boot] [GIT PULL] Pull request: u-boot-imx
Stefano Babic
- [U-Boot] Pull request: u-boot-sh/master
Wolfgang Denk
- [U-Boot] [PATCH] tools/mkenvimage.c: fix basename(3) usage
Wolfgang Denk
- [U-Boot] [STATUS] Final pull requests for -rc1?
Wolfgang Denk
- [U-Boot] [STATUS] Final pull requests for -rc1?
Tom Rini
- [U-Boot] Issue with running commands
Sughosh Ganu
- [U-Boot] [PATCH 2/2] microblaze: move ENV onto top of flash
Stephan Linz
- [U-Boot] [PATCH v2] nand: Hack to support 4k page in fsl_elbc_nand
Rafael Beims
- [U-Boot] [PATCH v3 0/1] fsl_elbc support for 4k devices and factory badblock migration
Rafael Beims
- [U-Boot] [PATCH v3] nand: Hack to support 4k page in fsl_elbc_nand
Rafael Beims
- [U-Boot] Issue with running commands
Wolfgang Denk
- [U-Boot] [PATCH v2] nand: Hack to support 4k page in fsl_elbc_nand
Scott Wood
- [U-Boot] Please pull u-boot-atmel/master
Andreas Bießmann
- [U-Boot] [PATCH] beagle: removed unused pr_debug #define
Peter Meerwald
- [U-Boot] [PATCH 1/1] USB: EHCI: Initialize multiple USB controllers at once
Jim Lin
- [U-Boot] [PATCH] armv7: Fix infinite loop for the spl boot
Zhong Hongbo
- [U-Boot] [PATCH v5 00/13] split tegra20 arm7 code into separate SPL
Tom Warren
- [U-Boot] [PATCH] arm/s5pxx: Fix get_timer_masked to get the time.
Zhong Hongbo
- [U-Boot] i.mx28 can't power off in imx-boot
alex
- [U-Boot] [PATCH v3] arm : Atmel : add at91sam9x5ek board support
Bo Shen
- [U-Boot] [PATCH] mmc: dw-mmc: support DesignWare MMC controller
Jaehoon Chung
- [U-Boot] [PATCH 0/2] EXYNOS: support the DesignWare MMC Controller
Jaehoon Chung
- [U-Boot] [PATCH 1/2] EXYNOS: clock: add the get_mmc_clk function
Jaehoon Chung
- [U-Boot] [PATCH 2/2] EXYNOS: mmc: support DesignWare Controller for Samsung-SoC
Jaehoon Chung
- [U-Boot] [PATCH 2/2] microblaze: move ENV onto top of flash
Michal Simek
- [U-Boot] [PATCH 5/5] microblaze: Wire up fdt emaclite initialization
Michal Simek
- [U-Boot] [PATCH 2/2] EXYNOS: mmc: support DesignWare Controller for Samsung-SoC
Rajeshwari Birje
- [U-Boot] [PATCH 2/2] EXYNOS: mmc: support DesignWare Controller for Samsung-SoC
Jaehoon Chung
- [U-Boot] [PATCH v6 00/15] split tegra20 arm7 code into separate SPL
Allen Martin
- [U-Boot] [PATCH v6 01/15] tegra20: rename tegra2 -> tegra20
Allen Martin
- [U-Boot] [PATCH v6 02/15] tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common
Allen Martin
- [U-Boot] [PATCH v6 03/15] tegra20: rename CONFIG_MACH_TEGRA_GENERIC
Allen Martin
- [U-Boot] [PATCH v6 04/15] tegra20: tec: add tegra20-common-post.h
Allen Martin
- [U-Boot] [PATCH v6 05/15] tegra20: make board mkdir commands unconditional
Allen Martin
- [U-Boot] [PATCH v6 06/15] mkconfig: add support for SPL CPU
Allen Martin
- [U-Boot] [PATCH v6 07/15] ARM: Fix arm720t SPL build
Allen Martin
- [U-Boot] [PATCH v6 08/15] tegra20: remove timer_init from SPL build
Allen Martin
- [U-Boot] [PATCH v6 09/15] ARM: add tegra20 support to arm720t
Allen Martin
- [U-Boot] [PATCH v6 10/15] tegra20: add u-boot-*-tegra.bin targets
Allen Martin
- [U-Boot] [PATCH v6 11/15] tegra20: move SDRAM param save to later in boot
Allen Martin
- [U-Boot] [PATCH v6 12/15] tegra20: enable SPL for tegra20 boards
Allen Martin
- [U-Boot] [PATCH v6 13/15] arm: enable libgcc build for SPL
Allen Martin
- [U-Boot] [PATCH v6 14/15] spl: fix SPL build of private libgcc
Allen Martin
- [U-Boot] [PATCH v6 15/15] tegra20: Remove armv4t build flags
Allen Martin
- [U-Boot] [PATCH 2/2] EXYNOS: mmc: support DesignWare Controller for Samsung-SoC
Rajeshwari Birje
- [U-Boot] Issue with running commands
Christian Riesch
- [U-Boot] PCI Express Bus Scanning Issue
vaibhav kothari
- [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v9 0/4] Kirkwood: add lschlv2 and lsxhl board support
Prafulla Wadaskar
- [U-Boot] [PATCH v2 0/3] Bug fixes for LaCie devices
Prafulla Wadaskar
- [U-Boot] [PATCH] arm/kirkwood: protect the ENV_SPI #defines
Prafulla Wadaskar
- [U-Boot] [PATCH] arm/km: use spi claim bus to switch between SPI and NAND
Prafulla Wadaskar
- [U-Boot] [PATCH v2 0/4] mmc: Support designWare Controller
Jaehoon Chung
- [U-Boot] [PATCH v2 1/4] mmc: dw-mmc: support DesignWare MMC Controller
Jaehoon Chung
- [U-Boot] [PATCH 2/4] EXYNOS: clock: add the get_mmc_clk function
Jaehoon Chung
- [U-Boot] [PATCH v2 3/4] EXYNOS: mmc: support DesignWare Controller for Samsung-SoC
Jaehoon Chung
- [U-Boot] [PATCH v2 4/4] mmc: dw-mmc: add dw-mmc's confiuration at Makefile
Jaehoon Chung
- [U-Boot] [PATCH v2 02/14] arm/km: add kmcoge5un board support
Prafulla Wadaskar
- [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood
Prafulla Wadaskar
- [U-Boot] [PATCH v2 04/14] arm/km: remove portl2.h and use km_kirkwood instead
Prafulla Wadaskar
- [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration
Prafulla Wadaskar
- [U-Boot] [PATCH 1/2] igep00x0: default to OMAP-specific serial driver
Enric Balletbò i Serra
- [U-Boot] [PATCH 2/2] igep00x0: default mmcrootfstype to EXT4
Enric Balletbò i Serra
- [U-Boot] arm, kirkwood: KWGBE_PORT_SERIAL_CONTROL1_REG define correct?
Heiko Schocher
- [U-Boot] ARM CONFIG_OF_CONTROL status
Michal Simek
- [U-Boot] [PATCH v2 02/14] arm/km: add kmcoge5un board support
Holger Brunck
- [U-Boot] [PATCH 0/7] dfu:usb: Composite USB download gadget with DFU function
Lukasz Majewski
- [U-Boot] [PATCH 1/7] dfu:usb: Support for g_dnl composite download gadget.
Lukasz Majewski
- [U-Boot] [PATCH 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget
Lukasz Majewski
- [U-Boot] [PATCH 3/7] dfu: DFU backend implementation
Lukasz Majewski
- [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation
Lukasz Majewski
- [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command
Lukasz Majewski
- [U-Boot] [PATCH 6/7] arm:trats: Support for USB UDC driver at TRATS board.
Lukasz Majewski
- [U-Boot] [PATCH 7/7] arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATS
Lukasz Majewski
- [U-Boot] [PATCH] arm:trats: loaduimage environment variable defied for TRATS target
Lukasz Majewski
- [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration
Valentin Longchamp
- [U-Boot] [PATCH 0/6 V3] EXYNOS5: USB: Enable USB 2.0 support
Joonyoung Shim
- [U-Boot] u-boot-xlnx: missing fatload command
Elvis Dowson
- [U-Boot] [PATCH 0/6 V3] EXYNOS5: USB: Enable USB 2.0 support
Rajeshwari Birje
- [U-Boot] arm, kirkwood: KWGBE_PORT_SERIAL_CONTROL1_REG define correct?
Prafulla Wadaskar
- [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood
Holger Brunck
- [U-Boot] [PATCH] arch-kirkwood: Ethernet port macro returning incorrect address
Heiko Schocher
- [U-Boot] [PATCH 0/6 V3] EXYNOS5: USB: Enable USB 2.0 support
Vivek Gautam
- [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood
Prafulla Wadaskar
- [U-Boot] [RFC][PATCH] net: nfs: make NFS_TIMEOUT configurable
Tetsuyuki Kobayashi
- [U-Boot] [PATCH 2/2 V2] Kirkwood: Add support for Ka-Ro TK71
Prafulla Wadaskar
- [U-Boot] [PATCH 2/2 V2] Kirkwood: Add support for Ka-Ro TK71
Prafulla Wadaskar
- [U-Boot] Pull request for u-boot-marvell.git
Prafulla Wadaskar
- [U-Boot] Pull request for u-boot-marvell.git
Prafulla Wadaskar
- [U-Boot] [PATCH 2/2 V2] Kirkwood: Add support for Ka-Ro TK71
Prafulla Wadaskar
- [U-Boot] [PATCH 2/2 V2] Kirkwood: Add support for Ka-Ro TK71
Marek Vasut
- [U-Boot] [PATCH V3 2/2] Kirkwood: Add support for Ka-Ro TK71
Marek Vasut
- [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood
Holger Brunck
- [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood
Prafulla Wadaskar
- [U-Boot] [PATCH 00/10 V5] EXYNOS5: Support for Exynos5250 Rev 1.0
Minkyu Kang
- [U-Boot] [PATCH V3 2/2] Kirkwood: Add support for Ka-Ro TK71
Prafulla Wadaskar
- [U-Boot] [PATCH V3 2/2] Kirkwood: Add support for Ka-Ro TK71
Marek Vasut
- [U-Boot] [PATCH 0/7] dfu:usb: Composite USB download gadget with DFU function
Otavio Salvador
- [U-Boot] [PATCH 0/7] dfu:usb: Composite USB download gadget with DFU function
Marek Vasut
- [U-Boot] [PATCH V3 2/2] Kirkwood: Add support for Ka-Ro TK71
Prafulla Wadaskar
- [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood
Holger Brunck
- [U-Boot] [PATCH 2/2 V4] Kirkwood: Add support for Ka-Ro TK71
Marek Vasut
- [U-Boot] [PATCH V3 2/2] Kirkwood: Add support for Ka-Ro TK71
Marek Vasut
- [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood
Prafulla Wadaskar
- [U-Boot] [PATCH 2/2 V4] Kirkwood: Add support for Ka-Ro TK71
Prafulla Wadaskar
- [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood
Holger Brunck
- [U-Boot] [RFC][PATCH] net: nfs: make NFS_TIMEOUT configurable
Joe Hershberger
- [U-Boot] [PATCH v6 00/15] split tegra20 arm7 code into separate SPL
Thierry Reding
- [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood
Detlev Zundel
- [U-Boot] [PATCH 0/1] Correct ONFI chip size detection for LUN count > 1
Rafael Beims
- [U-Boot] [PATCH] nand: Support ONFI chip size detection for lun_count > 1
Rafael Beims
- [U-Boot] [RFC][PATCH] net: nfs: make NFS_TIMEOUT configurable
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood
Prafulla Wadaskar
- [U-Boot] environment access before relocation does not work on (some) arm
Matthias Fuchs
- [U-Boot] [PATCH 2/2] igep00x0: default mmcrootfstype to EXT4
Enric Balletbò i Serra
- [U-Boot] [PATCH 1/2] igep00x0: default to OMAP-specific serial driver
Enric Balletbò i Serra
- [U-Boot] [PATCH v6 05/15] tegra20: make board mkdir commands unconditional
Stephen Warren
- [U-Boot] [PATCH] ext2fs: fix warning: 'blocknxt' may be used uninitialized
Kim Phillips
- [U-Boot] [PATCH] powerpc/mpc83xx: fix copyright string in serdes.c
Kim Phillips
- [U-Boot] [PATCH] powerpc/mpc83xx: increment malloc heap size
Kim Phillips
- [U-Boot] [GIT PULL] mpc83xx: minor fixes
Kim Phillips
- [U-Boot] [PATCH v6 00/15] split tegra20 arm7 code into separate SPL
Allen Martin
- [U-Boot] [PATCH] imx: Remove unused Macro CONFIG_DISCOVER_PHY
Ashok
- [U-Boot] [PATCH] imx: Remove unused Macro CONFIG_DISCOVER_PHY
Fabio Estevam
- [U-Boot] [PATCH 1/1] igep0020: set OMAP MUX mcspi1_cs2 pin to GPIO 176 mode
Javier Martinez Canillas
- [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood
Wolfgang Denk
- [U-Boot] environment access before relocation does not work on (some) arm
Wolfgang Denk
- [U-Boot] [PATCH] usb_storage: fix ehci driver max transfer size
Marek Vasut
- [U-Boot] Issue with running commands
Sughosh Ganu
- [U-Boot] [PATCH 1/7] dfu:usb: Support for g_dnl composite download gadget.
Marek Vasut
- [U-Boot] ARM CONFIG_OF_CONTROL status
Simon Glass
- [U-Boot] ARM CONFIG_OF_CONTROL status
Simon Glass
- [U-Boot] ARM CONFIG_OF_CONTROL status
Simon Glass
- [U-Boot] ARM CONFIG_OF_CONTROL status
Stephan Linz
- [U-Boot] [RFC PATCH] net: emaclite: Support OF initialization
Simon Glass
- [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled
Ilya Yanok
- [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled
Ilya Yanok
- [U-Boot] ARM CONFIG_OF_CONTROL status
Stephan Linz
- [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled
Tom Rini
- [U-Boot] [PATCH v4 0/1] fsl_elbc support for 4k devices and factory badblock migration
Rafael Beims
- [U-Boot] [PATCH v4] nand: Hack to support 4k page in fsl_elbc_nand
Rafael Beims
- [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled
Ilya Yanok
- [U-Boot] [PATCH 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget
Marek Vasut
- [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled
Marek Vasut
- [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled
Marek Vasut
- [U-Boot] [PATCH 3/7] dfu: DFU backend implementation
Marek Vasut
- [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation
Marek Vasut
- [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command
Marek Vasut
- [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation
Tom Rini
- [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation
Marek Vasut
- [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation
Tom Rini
- [U-Boot] [PATCH] ext2fs: fix warning: 'blocknxt' may be used uninitialized
Andreas Bießmann
- [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation
Marek Vasut
- [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation
Tom Rini
- [U-Boot] [PATCH v2] ext2fs: fix warning: 'blocknxt' may be used uninitialized
Kim Phillips
- [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation
Stephen Warren
- [U-Boot] Issue with running commands
Graeme Russ
- [U-Boot] [PATCH v3] arm : Atmel : add at91sam9x5ek board support
Andreas Bießmann
- [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation
Tom Rini
- [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation
Stephen Warren
- [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation
Marek Vasut
- [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled
Marek Vasut
- [U-Boot] [PATCH 6/7] arm:trats: Support for USB UDC driver at TRATS board.
Minkyu Kang
- [U-Boot] [PATCH 7/7] arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATS
Minkyu Kang
- [U-Boot] ARM CONFIG_OF_CONTROL status
Simon Glass
- [U-Boot] [PATCH 00/12] ARM: rpi_b: many minor enhancements
Stephen Warren
- [U-Boot] [PATCH 01/12] ARM: arm1176: enable instruction cache in arch_cpu_init()
Stephen Warren
- [U-Boot] [PATCH 02/12] ARM: rpi_b: enable CONFIG_ARCH_CPU_INIT for icache
Stephen Warren
- [U-Boot] [PATCH 03/12] ARM: rpi_b: define CONFIG_MACH_TYPE
Stephen Warren
- [U-Boot] [PATCH 04/12] ARM: rpi_b: include config_cmd_default.h
Stephen Warren
- [U-Boot] [PATCH 05/12] ARM: rpi_b: enable CONFIG_OF_LIBFDT
Stephen Warren
- [U-Boot] [PATCH 06/12] ARM: rpi_b: set bi_boot_params
Stephen Warren
- [U-Boot] [PATCH 07/12] ARM: rpi_b: add ATAG support for bootm/bootz
Stephen Warren
- [U-Boot] [PATCH 08/12] ARM: rpi_b: drop RAM size to 128M
Stephen Warren
- [U-Boot] [PATCH 09/12] ARM: rpi_b: move stack to top of RAM
Stephen Warren
- [U-Boot] [PATCH 10/12] ARM: rpi_b: re-order rpi_b.h to keep related defines adjacent
Stephen Warren
- [U-Boot] [PATCH 11/12] ARM: bcm2835: implement reset using watchdog
Stephen Warren
- [U-Boot] [PATCH 12/12] ARM: rpi_b: enabled bootz command
Stephen Warren
- [U-Boot] [PATCH 0/2] Add GPIO driver for BCM2835 SoC
Stephen Warren
- [U-Boot] [PATCH 08/12] ARM: rpi_b: drop RAM size to 128M
Stephen Warren
- [U-Boot] [RFC][PATCH v2] net: nfs: make NFS_TIMEOUT configurable
Tetsuyuki Kobayashi
- [U-Boot] [PATCH 0/2] Add GPIO driver for BCM2835 SoC
Vikram Narayanan
- [U-Boot] [PATCH] video: fixed exynos_mipi_dsi_init() declaration
Minkyu Kang
- [U-Boot] [PATCH] video: fixed exynos_mipi_dsi_init() declaration
Donghwa Lee
- [U-Boot] [PATCH 00/10 V5] EXYNOS5: Support for Exynos5250 Rev 1.0
Rajeshwari Birje
- [U-Boot] [RFC][PATCH v2] net: nfs: make NFS_TIMEOUT configurable
Wolfgang Denk
- [U-Boot] ARM CONFIG_OF_CONTROL status
Michal Simek
- [U-Boot] ARM CONFIG_OF_CONTROL status
Michal Simek
- [U-Boot] [PATCH 00/10 V6] EXYNOS5: Support for Exynos5250 Rev 1.0
Rajeshwari Shinde
- [U-Boot] [PATCH 01/10 V6] ARCH: SPL: Add parametric board initializer
Rajeshwari Shinde
- [U-Boot] [PATCH 02/10 V6] SMDK5250: SPL: Define parametric board initializer
Rajeshwari Shinde
- [U-Boot] [PATCH 03/10 V6] SMDK5250: Add smdk5250-uboot-spl.lds
Rajeshwari Shinde
- [U-Boot] [PATCH 04/10 V6] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0
Rajeshwari Shinde
- [U-Boot] [PATCH 05/10 V6] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0
Rajeshwari Shinde
- [U-Boot] [PATCH 06/10 V6] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0
Rajeshwari Shinde
- [U-Boot] [PATCH 07/10 V6] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0
Rajeshwari Shinde
- [U-Boot] [PATCH 08/10 V6] EXYNOS5: CLOCK: Add BPLL support
Rajeshwari Shinde
- [U-Boot] [PATCH 09/10 V6] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0
Rajeshwari Shinde
- [U-Boot] [PATCH 10/10 V6] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0
Rajeshwari Shinde
- [U-Boot] [PATCH v2] ext2fs: fix warning: 'blocknxt' may be used uninitialized
Thierry Reding
- [U-Boot] ARM CONFIG_OF_CONTROL status
Michal Simek
- [U-Boot] [RFC PATCH] net: emaclite: Support OF initialization
Michal Simek
- [U-Boot] ARM CONFIG_OF_CONTROL status
Michal Simek
- [U-Boot] [PATCH] usb_storage: fix ehci driver max transfer size
Stefan Herbrechtsmeier
- [U-Boot] CONFIG_OF_EMBED/CONFIG_OF_SEPARATE and fdtcontroladdr
Michal Simek
- [U-Boot] [PATCH] usb_storage: fix ehci driver max transfer size
Schneider, Kolja
- [U-Boot] [PATCH] cm-t35: fix incorrect NAND_ECC layout selection
Nikita Kiryanov
- [U-Boot] [PATCH 1/7] dfu:usb: Support for g_dnl composite download gadget.
Lukasz Majewski
- [U-Boot] [PATCH] usb_storage: fix ehci driver max transfer size
Stefan Herbrechtsmeier
- [U-Boot] uboot for vexpress-a15x2
Xiao Jiang
- [U-Boot] [PATCH 00/10 V6] EXYNOS5: Support for Exynos5250 Rev 1.0
Minkyu Kang
- [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration
Detlev Zundel
- [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood
Holger Brunck
- [U-Boot] [RFC][PATCH v3] net: nfs: make NFS_TIMEOUT configurable
Tetsuyuki Kobayashi
- [U-Boot] [PATCH 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget
Lukasz Majewski
- [U-Boot] [PATCH 3/7] dfu: DFU backend implementation
Lukasz Majewski
- [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation
Lukasz Majewski
- [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration
Prafulla Wadaskar
- [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood
Prafulla Wadaskar
- [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood
Prafulla Wadaskar
- [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command
Lukasz Majewski
- [U-Boot] [PATCH 6/7] arm:trats: Support for USB UDC driver at TRATS board.
Lukasz Majewski
- [U-Boot] [PATCH V2 3/4] common lcd: simplify core functions
Nikita Kiryanov
- [U-Boot] [PATCH] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Ilya Yanok
- [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled
Ilya Yanok
- [U-Boot] [PATCH 1/3] cm4008: set gd->ram_size in dram_init
Yann Vernier
- [U-Boot] [STATUS] Final pull requests for -rc1?
Ilya Yanok
- [U-Boot] [PATCH 2/3] cm4008: Fix ROM relocation.
Yann Vernier
- [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash
Hornung, Michael
- [U-Boot] [PATCH 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget
Marek Vasut
- [U-Boot] [PATCH 3/7] dfu: DFU backend implementation
Marek Vasut
- [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation
Marek Vasut
- [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command
Marek Vasut
- [U-Boot] [RESEND 00/11] Support for ST-Ericsson snowball board
mathieu.poirier at linaro.org
- [U-Boot] [RESEND 01/11] snowball: Add support for ux500 based snowball board
mathieu.poirier at linaro.org
- [U-Boot] [RESEND 02/11] u8500: Moving prcmu to cpu directory
mathieu.poirier at linaro.org
- [U-Boot] [RESEND 03/11] snowball: Adding architecture dependent initialisation
mathieu.poirier at linaro.org
- [U-Boot] [RESEND 04/11] snowball: Adding CPU clock initialisation
mathieu.poirier at linaro.org
- [U-Boot] [RESEND 05/11] snowball: Moving to ux500.v2 addess scheme for PRCMU access
mathieu.poirier at linaro.org
- [U-Boot] [RESEND 06/11] snowball: applying power to LAN and GBF controllers
mathieu.poirier at linaro.org
- [U-Boot] [RESEND 07/11] u8500: Moving processor-specific functions to cpu area.
mathieu.poirier at linaro.org
- [U-Boot] [RESEND 08/11] u8500: Enabling power to MMC device on AB8500 V2
mathieu.poirier at linaro.org
- [U-Boot] [RESEND 09/11] u8500: Separating mmc config parameters from driver
mathieu.poirier at linaro.org
- [U-Boot] [RESEND 10/11] armv7: Adding cpu specific cache managmenent
mathieu.poirier at linaro.org
- [U-Boot] [RESEND 11/11] snowball: Adding board specific cache cleanup routine
mathieu.poirier at linaro.org
- [U-Boot] [PATCH v3 1/3] AM335x : Add USB support for AM335x in u-boot
Ilya Yanok
- [U-Boot] [PATCH 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget
Lukasz Majewski
- [U-Boot] [PATCH 3/7] dfu: DFU backend implementation
Lukasz Majewski
- [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation
Lukasz Majewski
- [U-Boot] [STATUS] Final pull requests for -rc1?
Tom Rini
- [U-Boot] [PATCH v2 0/7] dfu:usb: Composite USB download gadget with DFU function
Lukasz Majewski
- [U-Boot] [PATCH v2 1/7] dfu:usb: Support for g_dnl composite download gadget.
Lukasz Majewski
- [U-Boot] [PATCH v2 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget
Lukasz Majewski
- [U-Boot] [PATCH v2 3/7] dfu: DFU backend implementation
Lukasz Majewski
- [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation
Lukasz Majewski
- [U-Boot] [PATCH v2 5/7] dfu:cmd: Support for DFU u-boot command
Lukasz Majewski
- [U-Boot] [PATCH v2 6/7] arm:trats: Support for USB UDC driver at TRATS board.
Lukasz Majewski
- [U-Boot] [PATCH v2 7/7] arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATS
Lukasz Majewski
- [U-Boot] [PATCH 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget
Marek Vasut
- [U-Boot] [PATCH 3/7] dfu: DFU backend implementation
Marek Vasut
- [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash
Fabio Estevam
- [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash
Fabio Estevam
- [U-Boot] [STATUS] Final pull requests for -rc1?
Marek Vasut
- [U-Boot] [RESEND 01/11] snowball: Add support for ux500 based snowball board
Wolfgang Denk
- [U-Boot] [RESEND 02/11] u8500: Moving prcmu to cpu directory
Wolfgang Denk
- [U-Boot] [RESEND 11/11] snowball: Adding board specific cache cleanup routine
Wolfgang Denk
- [U-Boot] [STATUS] Final pull requests for -rc1?
Ilya Yanok
- [U-Boot] [RESEND 11/11] snowball: Adding board specific cache cleanup routine
Mathieu Poirier
- [U-Boot] [RESEND 11/11] snowball: Adding board specific cache cleanup routine
Fabio Estevam
- [U-Boot] [RESEND 11/11] snowball: Adding board specific cache cleanup routine
Wolfgang Denk
- [U-Boot] [PATCH] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Marek Vasut
- [U-Boot] [PATCH 1/3] fdt: Add board specific dts inclusion
Stephan Linz
- [U-Boot] [PATCH 2/3] microblaze: Wire up dts configuration
Stephan Linz
- [U-Boot] [PATCH 3/3] microblaze: Wire up OF support for emaclite
Stephan Linz
- [U-Boot] ARM CONFIG_OF_CONTROL status
Stephan Linz
- [U-Boot] [PATCH v4 0/3] AM335x: Add USB support in u-boot.
Marek Vasut
- [U-Boot] [PATCH] arm:trats: loaduimage environment variable defied for TRATS target
Minkyu Kang
- [U-Boot] [PATCH v4 1/1] zfs: Add ZFS filesystem support
Jorgen Lundman
- [U-Boot] [PATCH v4 1/1] zfs: Add ZFS filesystem support
Graeme Russ
- [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood
Holger Brunck
- [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood
Prafulla Wadaskar
- [U-Boot] [PATCH v3] powerpc/p1022ds: Add sdcard and spi boot support to P1022DS
Eibach, Dirk
- [U-Boot] Issue with running commands
Sughosh Ganu
- [U-Boot] [PATCH] arm: rmobile: kzm9g: Modify sdram area
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2 1/5] arm: rmobile: Add basic support for Renesas R-Mobile
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 2/5] arm: rmobile: Add support Renesas SH73A0
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2 3/5] sh: Add support pin function control using GPIO
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2 4/5] serial: sh: Add support Renesas SH73A0
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2 5/5] arm: rmobile: Add supoprt for KMC KZM-A9-GT board
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] arm: rmobile: kzm9g: Adjust hardware setting in lowlevel_init.S
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood
Holger Brunck
- [U-Boot] [PATCH v2 1/5] arm: rmobile: Add basic support for Renesas R-Mobile
Tetsuyuki Kobayashi
- [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available
Albert ARIBAUD
- [U-Boot] Issue with running commands
Prabhakar Lad
- [U-Boot] [PATCH 3/3] cm4008: use common cfi_flash support
Yann Vernier
- [U-Boot] [PATCH v2 5/5] arm: rmobile: Add supoprt for KMC KZM-A9-GT board
Tetsuyuki Kobayashi
- [U-Boot] [PATCH 0/3] Update Micrel KSZ8695 support to usable state
Yann Vernier
- [U-Boot] [GIT PULL] Pull request: u-boot-imx
Albert ARIBAUD
- [U-Boot] [STATUS] Final pull requests for -rc1?
Albert ARIBAUD
- [U-Boot] Please pull u-boot-atmel/master
Albert ARIBAUD
- [U-Boot] Pull request for u-boot-marvell.git
Albert ARIBAUD
- [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash
Hornung, Michael
- [U-Boot] [PATCH v3] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0
Albert ARIBAUD
- [U-Boot] [PATCH] arm: bugfix: Move vector table before jumping relocated code
Albert ARIBAUD
- [U-Boot] Please pull u-boot-atmel/master
Andreas Bießmann
- [U-Boot] Please pull u-boot-atmel/master - PLEASE HOLD ON
Albert ARIBAUD
- [U-Boot] Pull request for u-boot-marvell.git - PLEASE HOLD ON
Albert ARIBAUD
- [U-Boot] Please pull u-boot-atmel/master - go ahead
Albert ARIBAUD
- [U-Boot] Pull request for u-boot-marvell.git - go ahead
Albert ARIBAUD
- [U-Boot] [PATCH 3/3] cm4008: use common cfi_flash support
Andreas Bießmann
- [U-Boot] [PATCH 2/3] cm4008: Fix ROM relocation.
Andreas Bießmann
- [U-Boot] sha256_crypt for uboot
Albert ARIBAUD
- [U-Boot] [PATCH 1/3] cm4008: set gd->ram_size in dram_init
Andreas Bießmann
- [U-Boot] Please pull u-boot-atmel/master
Andreas Bießmann
- [U-Boot] [PATCH 1/2] Remove unused CONFIG_STACKSIZE
Albert ARIBAUD
- [U-Boot] USB detection
Manukumar
- [U-Boot] [PATCH] kirkwood: implement kw_sdram_bs_set()
Albert ARIBAUD
- [U-Boot] [PATCH] kirkwood: implement kw_sdram_bs_set()
Gerlando Falauto
- [U-Boot] [PATCH] kirkwood: implement kw_sdram_bs_set()
Albert ARIBAUD
- [U-Boot] Pull request for u-boot-marvell.git
Prafulla Wadaskar
- [U-Boot] [PATCH 0/3] arm: rmobile: kzm9g: enable booting Linux kernel
Tetsuyuki Kobayashi
- [U-Boot] Please pull u-boot-atmel/master
Albert ARIBAUD
- [U-Boot] U-boot Porting
sayed zahid
- [U-Boot] [PATCH 1/3] arm: rmobile: kzm9g: Modify sdram area
Tetsuyuki Kobayashi
- [U-Boot] [PATCH 2/3] arm: rmobile: kzm9g: Adjust low level hardware setting
Tetsuyuki Kobayashi
- [U-Boot] [PATCH 3/3] arm: rmobile: kzm9g: change prompt to board specific
Tetsuyuki Kobayashi
- [U-Boot] USB detection
Albert ARIBAUD
- [U-Boot] Pull request for u-boot-marvell.git
Albert ARIBAUD
- [U-Boot] [PATCH] armv7: Fix infinite loop for the spl boot
Zhong Hongbo
- [U-Boot] [PATCH] arm/s5pxx: Fix get_timer_masked to get the time.
Zhong Hongbo
- [U-Boot] [PATCH v3] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0
Albert ARIBAUD
- [U-Boot] [PATCH 0/7 V5] EXYNOS5: Enable I2C support
Rajeshwari Shinde
- [U-Boot] [PATCH 1/7 V5] EXYNOS: CLK: Add i2c clock
Rajeshwari Shinde
- [U-Boot] [PATCH 2/7 V5] EXYNOS: Add I2C base address.
Rajeshwari Shinde
- [U-Boot] [PATCH 3/7 V5] EXYNOS: PINMUX: Add pinmux support for I2C
Rajeshwari Shinde
- [U-Boot] [PATCH 4/7 V5] I2C: Move struct s3c24x0_i2c to a common place.
Rajeshwari Shinde
- [U-Boot] [PATCH 5/7 V5] I2C: Modify the I2C driver for EXYNOS5
Rajeshwari Shinde
- [U-Boot] [PATCH 6/7 V5] I2C: Add support for Multi channel
Rajeshwari Shinde
- [U-Boot] [PATCH 7/7 V5] CONFIG: SMDK5250: I2C: Enable I2C
Rajeshwari Shinde
- [U-Boot] [PATCH] arm: bugfix: Move vector table before jumping relocated code
Albert ARIBAUD
- [U-Boot] [PATCH] smdk6400: Move smdk6400 board from Makefile to boards.cfg
Zhong Hongbo
- [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood
Prafulla Wadaskar
- [U-Boot] [PATCH v2] arm: cm4008, cm41xx: set gd->ram_size in dram_init
Yann Vernier
- [U-Boot] [PATCH] kirkwood: implement kw_sdram_bs_set()
Prafulla Wadaskar
- [U-Boot] [PATCH] armv7: Fix infinite loop for the spl boot
Albert ARIBAUD
- [U-Boot] [PATCH] armv7: Fix infinite loop for the spl boot
Zhong Hongbo
- [U-Boot] Please pull u-boot-staging.git/sr at denx.de
Stefan Roese
- [U-Boot] [PATCH v2] arm: cm4008, cm41xx: use common cfi_flash support
Yann Vernier
- [U-Boot] Building U-Boot image with predefined environment
trh178
- [U-Boot] U-boot Porting
Andreas Bießmann
- [U-Boot] [PATCH v2] arm: cm4008, cm41xx: Fix ROM relocation
Yann Vernier
- [U-Boot] [PATCH v2] arm: cm4008, cm41xx: Fix ROM relocation
Yann Vernier
- [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood
Holger Brunck
- [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood
Prafulla Wadaskar
- [U-Boot] [PATCH 1/2] kirkwood: implement kw_sdram_bs_set()
Gerlando Falauto
- [U-Boot] [PATCH 2/2] km_arm: enable SDRAM window size fixup
Gerlando Falauto
- [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space
Zhong Hongbo
- [U-Boot] [PATCH v2] arm: cm4008, cm41xx: set gd->ram_size in dram_init
Andreas Bießmann
- [U-Boot] [PATCH v2] arm: cm4008, cm41xx: use common cfi_flash support
Andreas Bießmann
- [U-Boot] [PATCH v3 00/11] updates for Keymile Marvell boards
Holger Brunck
- [U-Boot] [PATCH v3 01/11] arm/km: add kmnusa board support
Holger Brunck
- [U-Boot] [PATCH v3 02/11] arm/km: add kmcoge5un board support
Holger Brunck
- [U-Boot] [PATCH v3 03/11] arm/km: convert mgcoge3un target to km_kirkwood
Holger Brunck
- [U-Boot] [PATCH v3 04/11] arm/km: remove portl2.h and use km_kirkwood instead
Holger Brunck
- [U-Boot] [PATCH v3 05/11] arm/km: enable BOCO2 FPGA download support
Holger Brunck
- [U-Boot] [PATCH v3 06/11] arm/km: cleanup km_kirkwood boards
Holger Brunck
- [U-Boot] [PATCH v3 07/11] arm/km: redefine piggy 4 reg names to avoid conflicts
Holger Brunck
- [U-Boot] [PATCH v3 08/11] arm/km: skip FPGA config when already configured
Holger Brunck
- [U-Boot] [PATCH v3 09/11] arm/km: support the 2 PCIe fpga resets
Holger Brunck
- [U-Boot] [PATCH v3 10/11] arm/km: add implementation for read_dip_switch
Holger Brunck
- [U-Boot] [PATCH v3 11/11] arm/km: remove calls to kw_gpio_* in board_early_init_f
Holger Brunck
- [U-Boot] [PATCH v2] arm: cm4008, cm41xx: Fix ROM relocation
Andreas Bießmann
- [U-Boot] USB detection
Marek Vasut
- [U-Boot] ARM CONFIG_OF_CONTROL status
Stephen Warren
- [U-Boot] [PATCH v4] arm/km: add kmnusa board support
Holger Brunck
- [U-Boot] [PATCH 1/2] kirkwood: implement kw_sdram_bs_set()
Marek Vasut
- [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space
Andreas Bießmann
- [U-Boot] [PATCH 1/2] kirkwood: implement kw_sdram_bs_set()
Gerlando Falauto
- [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood
Holger Brunck
- [U-Boot] [PATCH 1/2] kirkwood: implement kw_sdram_bs_set()
Marek Vasut
- [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space
Andreas Bießmann
- [U-Boot] [PATCH v3] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0
Tom Rini
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] [PATCH v3] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0
Albert ARIBAUD
- [U-Boot] [PATCH] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Tom Rini
- [U-Boot] [PATCH v4 0/3] AM335x: Add USB support in u-boot.
Tom Rini
- [U-Boot] [PATCH] armv7: Fix infinite loop for the spl boot
Albert ARIBAUD <albert.u.boot at aribaud.net> (by way of Albert ARIBAUD
- [U-Boot] Pull request for u-boot-marvell.git
Prafulla Wadaskar
- [U-Boot] [PATCH v4] arm/km: add kmnusa board support
Prafulla Wadaskar
- [U-Boot] [PATCH v3 00/11] updates for Keymile Marvell boards
Prafulla Wadaskar
- [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash
Fabio Estevam
- [U-Boot] [PATCH v8 2/4] net: use common rand()/srand() functions
Kim Phillips
- [U-Boot] [PATCH] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Ilya Yanok
- [U-Boot] [PATCH] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Ilya Yanok
- [U-Boot] [PATCH] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Marek Vasut
- [U-Boot] [PATCH 01/11 v2] snowball: Add support for ux500 based snowball board
mathieu.poirier at linaro.org
- [U-Boot] [PATCH 02/11 v2] u8500: Moving prcmu to cpu directory
mathieu.poirier at linaro.org
- [U-Boot] [PATCH 05/11 v2] snowball: Moving to ux500.v2 addess scheme for PRCMU access
mathieu.poirier at linaro.org
- [U-Boot] [PATCH 11/11 v2] snowball: Adding board specific cache cleanup routine
mathieu.poirier at linaro.org
- [U-Boot] [PATCH V2 01/25] mxc_i2c: fix i2c_imx_stop
Troy Kisky
- [U-Boot] [PATCH V2 02/25] mxc_i2c: remove ifdef of CONFIG_HARD_I2C
Troy Kisky
- [U-Boot] [PATCH V2 03/25] mxc_i2c: create tx_byte function
Troy Kisky
- [U-Boot] [PATCH V2 04/25] mxc_i2c: clear i2sr before waiting for bit
Troy Kisky
- [U-Boot] [PATCH V2 05/25] mxc_i2c: create i2c_init_transfer
Troy Kisky
- [U-Boot] [PATCH V2 06/25] mxc_i2c: call i2c_imx_stop on error in i2c_read/i2c_write
Troy Kisky
- [U-Boot] [PATCH V2 07/25] mxc_i2c.c: code i2c_probe as a 0 length i2c_write
Troy Kisky
- [U-Boot] [PATCH V2 08/25] mxc_i2c: combine i2c_imx_bus_busy and i2c_imx_trx_complete into wait_for_sr_state
Troy Kisky
- [U-Boot] [PATCH V2 09/25] mxc_i2c: remove redundant read
Troy Kisky
- [U-Boot] [PATCH V2 10/25] mxc_i2c: place imx_start code inline
Troy Kisky
- [U-Boot] [PATCH V2 11/25] mxc_i2c: place i2c_reset code inline
Troy Kisky
- [U-Boot] [PATCH V2 12/25] mxc_i2c: don't disable controller after every transaction
Troy Kisky
- [U-Boot] [PATCH V2 13/25] mxc_i2c: change slave addr if conflicts with destination.
Troy Kisky
- [U-Boot] [PATCH V2 14/25] mxc_i2c: check for arbitration lost
Troy Kisky
- [U-Boot] [PATCH V2 15/25] mxc_i2c: add retries
Troy Kisky
- [U-Boot] [PATCH V2 16/25] mxc_i2c: add i2c_regs argument to i2c_imx_stop
Troy Kisky
- [U-Boot] [PATCH V2 17/25] mxc_i2c: prep work for multiple busses support
Troy Kisky
- [U-Boot] [PATCH V2 18/25] mxc_i2c: add bus recovery support
Troy Kisky
- [U-Boot] [PATCH V2 19/25] mxc_i2c: finish adding CONFIG_I2C_MULTI_BUS support
Troy Kisky
- [U-Boot] [PATCH V2 20/25] iomux-v3: remove include of mx6x_pins.h
Troy Kisky
- [U-Boot] [PATCH V2 21/25] i.mx: iomux-v3.h: move to imx-common include directory
Troy Kisky
- [U-Boot] [PATCH V2 22/25] i.mx: iomux-v3.c: move to imx-common directory
Troy Kisky
- [U-Boot] [PATCH V2 23/25] i.mx53: add definition for I2C3_BASE_ADDR
Troy Kisky
- [U-Boot] [PATCH V2 24/25] imx-common: add i2c.c for bus recovery support
Troy Kisky
- [U-Boot] [PATCH V2 25/25] mx6qsabrelite: add i2c multi-bus support
Troy Kisky
- [U-Boot] [PATCH] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Marek Vasut
- [U-Boot] [PATCH V2 01/25] mxc_i2c: fix i2c_imx_stop
Troy Kisky
- [U-Boot] [PATCH] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Ilya Yanok
- [U-Boot] [PATCH 1/2] phylib: phy_startup() should return an error code on failure
Timur Tabi
- [U-Boot] [PATCH 2/2] net: abort network initialization if the PHY driver fails
Timur Tabi
- [U-Boot] [PATCH] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Marek Vasut
- [U-Boot] [PATCH 1/2] Remove unused CONFIG_STACKSIZE
Rob Herring
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] Please pull u-boot-staging.git/sr at denx.de
Albert ARIBAUD
- [U-Boot] [PATCH v8 2/4] net: use common rand()/srand() functions
Michael Walle
- [U-Boot] [PATCH v2 5/5] arm: rmobile: Add supoprt for KMC KZM-A9-GT board
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v3] arm: rmobile: Add supoprt for KMC KZM-A9-GT board
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2 1/5] arm: rmobile: Add basic support for Renesas R-Mobile
Nobuhiro Iwamatsu
- [U-Boot] U-boot Porting
Daniel Schwierzeck
- [U-Boot] [PATCH] net: make net_rand.h inclusion depend on BOOTP_RANDOM_DELAY
Kim Phillips
- [U-Boot] U-boot Porting
Aaron Williams
- [U-Boot] U-boot Porting
Aaron Williams
- [U-Boot] [PATCH] arm: rmobile: Support build with gcc-4.6 or later
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] rmobile: kzm9g: Fix warnin in cmp_loop function
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 0/3] arm: rmobile: kzm9g: enable booting Linux kernel
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 2/2] net: abort network initialization if the PHY driver fails
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v3 6/7] tegra: nand: Add Tegra NAND driver
Scott Wood
- [U-Boot] [PATCH 2/2] net: abort network initialization if the PHY driver fails
Tabi Timur-B04825
- [U-Boot] [PATCH] arm/s5pxx: Fix get_timer_masked to get the time.
Minkyu Kang
- [U-Boot] [PATCH v4] arm : Atmel : add at91sam9x5ek board support
Bo Shen
- [U-Boot] [PATCH] arm/s5pxx: Fix get_timer_masked to get the time.
Jaehoon Chung
- [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space
Albert ARIBAUD
- [U-Boot] [PATCH v4] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0
Tetsuyuki Kobayashi
- [U-Boot] [PATCH V2 01/25] mxc_i2c: fix i2c_imx_stop
Marek Vasut
- [U-Boot] [PATCH] net: make net_rand.h inclusion depend on BOOTP_RANDOM_DELAY
Michael Walle
- [U-Boot] Please pull u-boot-staging.git/sr at denx.de
Stefan Roese
- [U-Boot] [PATCH 0/3] arm: rmobile: kzm9g: enable booting Linux kernel
Tetsuyuki Kobayashi
- [U-Boot] [PATCH] arm: rmobile: Support build with gcc-4.6 or later
Tetsuyuki Kobayashi
- [U-Boot] U-boot Porting
Andreas Bießmann
- [U-Boot] [PATCH v2] arm: cm4008, cm41xx: set gd->ram_size in dram_init
Yann Vernier
- [U-Boot] U-boot Porting
Andreas Bießmann
- [U-Boot] [PATCH v3] arm: cm4008, cm41xx: use common cfi_flash support
Yann Vernier
- [U-Boot] [PATCH v2] arm: cm4008, cm41xx: set gd->ram_size in dram_init
Andreas Bießmann
- [U-Boot] [PATCH v3] arm: cm4008, cm41xx: use common cfi_flash support
Andreas Bießmann
- [U-Boot] [PATCH v2] arm: cm4008, cm41xx: set gd->ram_size in dram_init
Yann Vernier
- [U-Boot] [PATCH v2] arm: cm4008, cm41xx: set gd->ram_size in dram_init
Andreas Bießmann
- [U-Boot] [PATCH 1/2] Remove unused CONFIG_STACKSIZE
Albert ARIBAUD
- [U-Boot] [PATCH] arm/s5pxx: Fix get_timer_masked to get the time.
Minkyu Kang
- [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space
Zhong Hongbo
- [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space
Zhong Hongbo
- [U-Boot] [PATCH v3] arm: cm4008, cm41xx: use common cfi_flash support
Albert ARIBAUD
- [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space
Zhong Hongbo
- [U-Boot] [PATCH] arm/s5pxx: Fix get_timer_masked to get the time.
Zhong Hongbo
- [U-Boot] [PATCH] armv7: Fix infinite loop for the spl boot
Zhong Hongbo
- [U-Boot] [PATCH] armv7: Fix infinite loop for the spl boot
Andreas Bießmann
- [U-Boot] [PATCH v2 1/2] kirkwood: implement kw_sdram_bs_set()
Gerlando Falauto
- [U-Boot] [PATCH v2 2/2] km_arm: enable SDRAM window size fixup
Gerlando Falauto
- [U-Boot] [PATCH] armv7: Fix infinite loop for the spl boot
Zhong Hongbo
- [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space
Zhong Hongbo
- [U-Boot] RMLL/LSM 2012 - U-Boot Developer's Meeting
Wolfgang Denk
- [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space
Andreas Bießmann
- [U-Boot] [PATCH v2] ext2fs: fix warning: 'blocknxt' may be used uninitialized
Jason Cooper
- [U-Boot] [PATCH 0/3] arm: rmobile: kzm9g: enable booting Linux kernel
Albert ARIBAUD
- [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space
Zhong Hongbo
- [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space
Andreas Bießmann
- [U-Boot] [PATCH v4] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0
Tom Rini
- [U-Boot] [PATCH] rmobile: kzm9g: Fix warnin in cmp_loop function
Albert ARIBAUD
- [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space
Zhong Hongbo
- [U-Boot] [PATCH] fs/ext2/ext2fs.c: fix warning
Jason Cooper
- [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space
Albert ARIBAUD
- [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space
Zhong Hongbo
- [U-Boot] [PATCH v3 6/7] tegra: nand: Add Tegra NAND driver
Stephen Warren
- [U-Boot] [PATCH v2 1/2] kirkwood: implement kw_sdram_bs_set()
Marek Vasut
- [U-Boot] [PATCH V2 01/25] mxc_i2c: fix i2c_imx_stop
Troy Kisky
- [U-Boot] [PATCH] powerpc/85xx: improve definition of BR_PHYS_ADDR macro
Timur Tabi
- [U-Boot] [PATCH] powerpc/85xx: remove support for the Freescale P3060
Timur Tabi
- [U-Boot] [PATCH V2 01/25] mxc_i2c: fix i2c_imx_stop
Marek Vasut
- [U-Boot] [PATCH 0/7] tegra20: enable thumb
Allen Martin
- [U-Boot] [PATCH 1/7] tegra20: remove inline assembly for u32 cast
Allen Martin
- [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb
Allen Martin
- [U-Boot] [PATCH 3/7] tegra20: enable thumb build
Allen Martin
- [U-Boot] [PATCH 4/7] arm: add _thumb1_case_uqi to libgcc
Allen Martin
- [U-Boot] [PATCH 5/7] arm: add thumb compatible return instructions
Allen Martin
- [U-Boot] [PATCH 6/7] arm: use thumb compatible return in arm720t
Allen Martin
- [U-Boot] [PATCH 7/7] arm: change arm720t to armv4t
Allen Martin
- [PATCH 1/1] efikmx: quick hack for testing i2c changes
Troy Kisky
- [U-Boot] [PATCH V2 01/25] mxc_i2c: fix i2c_imx_stop
Troy Kisky
- [U-Boot] [PATCH 2/2] [v2] net: abort network initialization if the PHY driver fails
Timur Tabi
- [U-Boot] [PATCH V2 01/25] mxc_i2c: fix i2c_imx_stop
Marek Vasut
- [U-Boot] [PATCH 2/2] [v2] net: abort network initialization if the PHY driver fails
Wolfgang Denk
- [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb
Stephen Warren
- [U-Boot] [PATCH 3/7] tegra20: enable thumb build
Stephen Warren
- [U-Boot] [PATCH 2/2] [v2] net: abort network initialization if the PHY driver fails
Timur Tabi
- [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb
Allen Martin
- [U-Boot] [PATCH 3/7] tegra20: enable thumb build
Allen Martin
- [U-Boot] U-boot Porting
Aaron Williams
- [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb
Stephen Warren
- [U-Boot] Pull request for u-boot-marvell.git
Albert ARIBAUD
- [U-Boot] Please pull u-boot-staging.git/sr at denx.de
Albert ARIBAUD
- [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb
Allen Martin
- [U-Boot] [GIT PULL] mpc83xx: minor fixes
Wolfgang Denk
- [U-Boot] Please pull u-boot-mpc85xx.git
Andy Fleming
- [U-Boot] [PATCH v4 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2
Marek Vasut
- [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb
Allen Martin
- [U-Boot] [PATCH V2 01/25] mxc_i2c: fix i2c_imx_stop
Marek Vasut
- [U-Boot] [PATCH 8/9] CACHE: net: asix: Fix asix driver to work with data cache on
Marek Vasut
- [U-Boot] [PATCH 8/9] CACHE: net: asix: Fix asix driver to work with data cache on
Marek Vasut
- [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb
Allen Martin
- [U-Boot] [PATCH v4 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v4 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2
Aneesh V
- [U-Boot] [PATCH V2 01/25] mxc_i2c: fix i2c_imx_stop
Troy Kisky
- [U-Boot] [PATCH 2/9] CACHE: Add cache_aligned() macro
Aneesh V
- [U-Boot] [PATCH 6/9] CACHE: nand read/write: Test if start address is aligned
Aneesh V
- [U-Boot] [PATCH v5] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0
Tetsuyuki Kobayashi
- [U-Boot] [PATCH 1/4] MX28: Fix up the MMC driver DMA mode
Marek Vasut
- [U-Boot] [PATCH 2/4] MX28: Split out the PIO and DMA transfer functions
Marek Vasut
- [U-Boot] [PATCH 3/4] MX28: Transfer small blocks via PIO in MXS MMC
Marek Vasut
- [U-Boot] [PATCH 4/4] MX28: Fix MXS MMC DMA issues
Marek Vasut
- [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space
Andreas Bießmann
- [U-Boot] [PATCH v4 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2
Marek Vasut
- [U-Boot] [V3] arm: Fix to mistake clean the memory space
Zhong Hongbo
- [U-Boot] [PATCH] armv7: Fix to mistake clean the memory space
Zhong Hongbo
- [U-Boot] S3c64xx: Switch all I/O to use readl/writel function
Zhong Hongbo
- [U-Boot] [PATCH 01/13] smdk6400: Move smdk6400 board from Makefile to boards.cfg
Zhong Hongbo
- [U-Boot] [PATCH 02/13] S3C64XX: Switch to use readl/writel to operate nand flash
Zhong Hongbo
- [U-Boot] [PATCH 03/13] S3C64XX: Use readl/writel to operate uart
Zhong Hongbo
- [U-Boot] [PATCH 04/13] S3C64XX: add pwm for s3c64xx support
Zhong Hongbo
- [U-Boot] [PATCH 05/13] S3C64XX: reference s5p cpu time system for s3c64xx timer
Zhong Hongbo
- [U-Boot] [PATCH 06/13] S3C64xx: mov cpu_init.S to the board directory
Zhong Hongbo
- [U-Boot] [PATCH 07/13] S3C6400: Delete nand_spl for S3C6400
Zhong Hongbo
- [U-Boot] [PATCH 08/13] S3C6400: Adopt SPL framwork to support spl for nand flash
Zhong Hongbo
- [U-Boot] [PATCH 09/13] S3C64XX: Change SROM init to use read/write operation
Zhong Hongbo
- [U-Boot] [PATCH 10/13] S3C64XX: Switch to use read/writel to operation clock system
Zhong Hongbo
- [U-Boot] [PATCH 11/13] S3c64xx: clear GPIO, Interrupt, Watchdog flag.
Zhong Hongbo
- [U-Boot] [PATCH 12/13] S3C6400: clear memory init variable
Zhong Hongbo
- [U-Boot] [PATCH 13/13] S3C6400: Clear system clock variable
Zhong Hongbo
- [U-Boot] [V3] arm: Fix to mistake clean the memory space
Albert ARIBAUD
- [U-Boot] [PATCH v4 4/6] armv7: Use -march=armv7-a and thereby enable Thumb-2
Albert ARIBAUD
- [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb
Albert ARIBAUD
- [U-Boot] RMLL/LSM 2012 - U-Boot Developer's Meeting
Albert ARIBAUD
- [U-Boot] [PATCH 0/3] arm: rmobile: kzm9g: enable booting Linux kernel
Tetsuyuki Kobayashi
- [U-Boot] [PATCH V2] add new board vl_ma2sc
Albert ARIBAUD
- [U-Boot] [PATCH v2 0/5] arm: rmobile: kzm9g: enable booting Linux kernel
Tetsuyuki Kobayashi
- [U-Boot] [PATCH 2/3] ARM: mx6: Remove CONFIG_ARCH_CPU_INIT
Albert ARIBAUD
- [U-Boot] [PATCH v2 1/5] arm: rmobile: kzm9g: Modify sdram area
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2 2/5] arm: rmobile: kzm9g: Adjust low level hardware setting
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2 3/5] arm: rmobile: kzm9g: change prompt to board specific
Tetsuyuki Kobayashi
- [U-Boot] [PATCH 3/3] ARM: mx28: Remove CONFIG_ARCH_CPU_INIT
Albert ARIBAUD
- [U-Boot] [PATCH v2 4/5] arm: rmobile: kzm9g: Add dummy member to struct sh73a0_rwdt
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2 5/5] MAINTAINERS: Add Tetsuyuki Kobayshi for kzm9g
Tetsuyuki Kobayashi
- [U-Boot] [PATCH] PXA: Enable CONFIG_PREBOOT on zipitz2
Albert ARIBAUD
- [U-Boot] [PATCH 1/2] ARM: introduce arch_early_init_r()
Albert ARIBAUD
- [U-Boot] [PATCH 1/5] ARM: cache: Move the cp15 CR register read before flushing the cache.
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [V3] arm: Fix to mistake clean the memory space
Zhong Hongbo
- [U-Boot] [V4] arm: Fix to mistake clean the memory space
Zhong Hongbo
- [U-Boot] [PATCH v3] doc: README.mx28_common: Add missing entry into Contents
Fabio Estevam
- [U-Boot] [PATCH v3] doc: README.mx28_common: Add missing entry into Contents
Stefano Babic
- [U-Boot] [PATCH v2] mx28: Fix elftosb source link in README.mx28_common
Stefano Babic
- [U-Boot] [PATCH] mx6: Make pad name macro consistent with the datasheet
Stefano Babic
- [U-Boot] [PATCH 5/5] [PATCH 5/5] Add config file for the apf27
Stefano Babic
- [U-Boot] [PATCH 3/5] [PATCH 3/5] Add nand_spl support for the apf27
Stefano Babic
- [U-Boot] [PATCH 4/5] [PATCH 4/5] Add FPGA support for the apf27 board
Stefano Babic
- [U-Boot] [PATCH 2/5] [PATCH 2/5] Add support for the armadeus APF27 board
Stefano Babic
- [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb
Allen Martin
- [U-Boot] [PATCH] tools: Fix mingw tools build
Vladimir Yakovlev
- [U-Boot] [PATCH] usb_storage: fix ehci driver max transfer size
Marek Vasut
- [U-Boot] S3c64xx: Switch all I/O to use readl/writel function
Zhong Hongbo
- [U-Boot] [PATCH 1/2] common.h: Introduce DEFINE_CACHE_ALIGN_BUFFER
Marek Vasut
- [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Marek Vasut
- [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Ilya Yanok
- [U-Boot] [PATCH] usb_storage: fix ehci driver max transfer size
Stefan Herbrechtsmeier
- [U-Boot] [PATCH 1/2] common.h: Introduce DEFINE_CACHE_ALIGN_BUFFER
Ilya Yanok
- [U-Boot] [PATCH] smsc95xx: align buffers to cache line size
Ilya Yanok
- [U-Boot] Compiling Uboot error:too many arguments
Zhang Heron
- [U-Boot] Compiling Uboot error:too many arguments
Wolfgang Denk
- [U-Boot] Please pull u-boot-mpc85xx.git
Wolfgang Denk
- [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Marek Vasut
- [U-Boot] [PATCH 1/2] common.h: Introduce DEFINE_CACHE_ALIGN_BUFFER
Marek Vasut
- [U-Boot] [PATCH] usb_storage: fix ehci driver max transfer size
Marek Vasut
- [U-Boot] [PATCH] smsc95xx: align buffers to cache line size
Marek Vasut
- [U-Boot] [PATCH] i.MX28: bug fixes in PMU configuration code
Marek Vasut
- [U-Boot] [PATCH] smsc95xx: align buffers to cache line size
Ilya Yanok
- [U-Boot] [PATCH] i.MX28: bug fixes in PMU configuration code
Fabio Estevam
- [U-Boot] [PATCH] net: bugfix: NetSetTimeout assumes CONFIG_SYS_HZ=1000
Wolfgang Denk
- [U-Boot] Pull request: u-boot-arm/master
Wolfgang Denk
- [U-Boot] [PATCH] Remove remaining mdelay() macros
Wolfgang Denk
- [U-Boot] [PATCH v9 2/4] net: use common rand()/srand() functions
Wolfgang Denk
- [U-Boot] [PATCH v9 2/4] net: use common rand()/srand() functions
Michael Walle
- [U-Boot] [PATCH] net: make net_rand.h inclusion depend on BOOTP_RANDOM_DELAY
Wolfgang Denk
- [U-Boot] [PATCH] tools: Fix mingw tools build
Wolfgang Denk
- [U-Boot] [PATCH v9 2/4] net: use common rand()/srand() functions
Wolfgang Denk
- [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Tom Rini
- [U-Boot] [PATCH v2] ext2fs: fix warning: 'blocknxt' may be used uninitialized
Wolfgang Denk
- [U-Boot] [PATCH] smsc95xx: align buffers to cache line size
Marek Vasut
- [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Marek Vasut
- [U-Boot] [STATUS] ARM - many build problems
Wolfgang Denk
- [U-Boot] [PATCH] smsc95xx: align buffers to cache line size
Ilya Yanok
- [U-Boot] [PATCH] smsc95xx: align buffers to cache line size
Marek Vasut
- [U-Boot] [PATCH 1/3] MX28: SPI: Refactor spi_xfer a bit
Marek Vasut
- [U-Boot] [PATCH 2/3] MX28: SPI: Pull out the PIO transfer function
Marek Vasut
- [U-Boot] [PATCH 3/3] MX28: SPI: Add DMA transfer support
Marek Vasut
- [U-Boot] Compiling Uboot error:too many arguments
Marek Vasut
- [U-Boot] [PATCH] net: bugfix: NetSetTimeout assumes CONFIG_SYS_HZ=1000
Tetsuyuki Kobayashi
- [U-Boot] [PATCH v2 0/4] mmc: Support designWare Controller
Jaehoon Chung
- [U-Boot] [STATUS] ARM - many build problems
Tetsuyuki Kobayashi
- [U-Boot] [PATCH V2 1/8] arm/davinci: fix DDR2/mDDR memory controller initialization for Omap L138
Mikhail Kshevetskiy
- [U-Boot] [PATCH V2 2/8] arm/davinci/da850: add uart0 pinmux
Mikhail Kshevetskiy
- [U-Boot] [PATCH V2 3/8] serial/ns16550: ns16550 has a different register layout on SOC_DA8XX
Mikhail Kshevetskiy
- [U-Boot] [PATCH V2 4/8] mtd/spi/spi_flash: support CMD_READ_ID=0x90 case
Mikhail Kshevetskiy
- [U-Boot] [PATCH V2 5/8] mtd/spi: add sst25l driver
Mikhail Kshevetskiy
- [U-Boot] [PATCH V2 6/8] MMC: u-boot-spl may be compiled without partition support
Mikhail Kshevetskiy
- [U-Boot] [PATCH V2 7/8] arm/davinci: spl - boot device selection
Mikhail Kshevetskiy
- [U-Boot] [PATCH V2 8/8] arm/davinci: spl - add compressed u-boot image support
Mikhail Kshevetskiy
- [U-Boot] [PATCH V2 7/8] arm/davinci: spl - boot device selection
Prabhakar Lad
- [U-Boot] [STATUS] ARM - many build problems
Thierry Reding
- [U-Boot] [PATCH v2 0/5] arm: rmobile: kzm9g: enable booting Linux kernel
Tetsuyuki Kobayashi
- [U-Boot] [PATCH V2 7/8] arm/davinci: spl - boot device selection
Mikhail Kshevetskiy
- [U-Boot] [STATUS] ARM - many build problems
Wolfgang Denk
- [U-Boot] [PATCH] fdt: send all dtc output to stderr
Wolfgang Denk
- [U-Boot] [PATCH 1/1] igep0020: set OMAP MUX mcspi1_cs2 pin to GPIO 176 mode
Enric Balletbò i Serra
- [U-Boot] [PATCH 1/3] fdt: Add board specific dts inclusion
Michal Simek
- [U-Boot] ARM CONFIG_OF_CONTROL status
Michal Simek
- [U-Boot] ARM CONFIG_OF_CONTROL status
Michal Simek
- [U-Boot] [PATCH V2 7/8] arm/davinci: spl - boot device selection
Prabhakar Lad
- [U-Boot] [PATCH v2 0/4] Board support and feature for LaCie devices
Simon Guinot
- [U-Boot] [PATCH 1/5] microblaze: Add gpio.h
Michal Simek
- [U-Boot] [PATCH 2/5] microblaze: Move individual board linker scripts to common script in cpu tree.
Michal Simek
- [U-Boot] [PATCH 3/5] microblaze: Add support for device tree driven board configuration
Michal Simek
- [U-Boot] [PATCH 1/1] igep0020: set OMAP MUX mcspi1_cs2 pin to GPIO 176 mode
Tom Rini
- [U-Boot] USB detection
Manukumar
- [U-Boot] [PATCH v5] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0
Tom Rini
- [U-Boot] [PATCH V2 7/8] arm/davinci: spl - boot device selection
Tom Rini
- [U-Boot] [PATCH 01/12] microblaze: board: Remove compilation warning
Michal Simek
- [U-Boot] [PATCH 02/12] microblaze: Remove extern from board.c
Michal Simek
- [U-Boot] [PATCH 03/12] microblaze: intc: Clear interrupt code
Michal Simek
- [U-Boot] [PATCH 04/12] microblaze: intc: Registering interrupt should return value
Michal Simek
- [U-Boot] [PATCH 05/12] microblaze: intc: Coding style cleanup
Michal Simek
- [U-Boot] [PATCH 06/12] microblaze: intc: Add device-tree driver configuration
Michal Simek
- [U-Boot] [PATCH 07/12] microblaze: Move __udelay implementation
Michal Simek
- [U-Boot] [PATCH 08/12] microblaze: timer: Prepare for device-tree initialization
Michal Simek
- [U-Boot] [PATCH 09/12] microblaze: timer: Add device-tree driver configuration
Michal Simek
- [U-Boot] [PATCH 10/12] microblaze: Call serial multi initialization
Michal Simek
- [U-Boot] [PATCH 11/12] microblaze: Clean microblaze initialization
Michal Simek
- [U-Boot] [PATCH 12/12] microblaze: board: Use bi_flashstart instead of CONFIG_SYS_FLASH_BASE
Michal Simek
- [U-Boot] [PATCH 1/3] MX28: SPI: Refactor spi_xfer a bit
Stefano Babic
- [U-Boot] [PATCH 1/3] MX28: SPI: Refactor spi_xfer a bit
Marek Vasut
- [U-Boot] [PATCH 1/3 V2] MX28: SPI: Refactor spi_xfer a bit
Marek Vasut
- [U-Boot] [PATCH 2/3 RESEND] MX28: SPI: Pull out the PIO transfer function
Marek Vasut
- [U-Boot] [PATCH 3/3 V2] MX28: SPI: Add DMA transfer support
Marek Vasut
- [U-Boot] [PATCH v3 0/6] arm: rmobile: kzm9g: enable booting Linux kernel
Tetsuyuki Kobayshi
- [U-Boot] [PATCH v3 1/6] arm: rmobile: kzm9g: Modify sdram area
Tetsuyuki Kobayshi
- [U-Boot] [PATCH v3 2/6] arm: rmobile: kzm9g: Adjust low level hardware setting
Tetsuyuki Kobayshi
- [U-Boot] [PATCH v3 3/6] arm: rmobile: kzm9g: change prompt to board specific
Tetsuyuki Kobayshi
- [U-Boot] [PATCH v3 4/6] arm: rmobile: kzm9g: Add dummy member to struct sh73a0_rwdt
Tetsuyuki Kobayshi
- [U-Boot] [PATCH v3 5/6] MAINTAINERS: Add Tetsuyuki Kobayshi for kzm9g
Tetsuyuki Kobayshi
- [U-Boot] [PATCH v3 6/6] arm: rmobile: kzm9g: Modify bus controller setting for CS4
Tetsuyuki Kobayshi
- [U-Boot] [V3] arm: Fix to mistake clean the memory space
Andreas Bießmann
- [U-Boot] [PATCH 1/2] at91sam9263ek: enable useful commands
Andreas Bießmann
- [U-Boot] [V4] arm: Fix to mistake clean the memory space
Andreas Bießmann
- [U-Boot] [PATCH v2 0/7] dfu:usb: Composite USB download gadget with DFU function
Lukasz Majewski
- [U-Boot] [PATCH v2 0/7] dfu:usb: Composite USB download gadget with DFU function
Tom Rini
- [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration
Holger Brunck
- [U-Boot] USB detection
Albert ARIBAUD
- [U-Boot] [PATCH 04/12] ARM: rpi_b: include config_cmd_default.h
Tom Rini
- [U-Boot] [PATCH 05/12] ARM: rpi_b: enable CONFIG_OF_LIBFDT
Tom Rini
- [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration
Wolfgang Denk
- [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration
Detlev Zundel
- [U-Boot] [PATCH] davinci: reduce pimux_config size by storing register id instead of address
Tom Rini
- [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration
Detlev Zundel
- [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash
Hornung, Michael
- [U-Boot] [PATCH v2] Add support for Bluegiga APX4 Development Kit
Veli-Pekka Peltola
- [U-Boot] sha256_crypt for uboot
Richard Retanubun
- [U-Boot] sha256_crypt for uboot
Albert ARIBAUD
- [U-Boot] [V3] arm: Fix to mistake clean the memory space
Albert ARIBAUD
- [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration
Detlev Zundel
- [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration
Valentin Longchamp
- [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration
Holger Brunck
- [U-Boot] sha256_crypt for uboot
Richard Retanubun
- [U-Boot] [ARM] one warning left for all ARM boards
Albert ARIBAUD
- [U-Boot] sha256_crypt for uboot
Albert ARIBAUD
- [U-Boot] random errors in kernel or rootfs;u-boot check sum
Anthony Garland
- [U-Boot] [PATCH v2 0/7] dfu:usb: Composite USB download gadget with DFU function
Marek Vasut
- [U-Boot] [PATCH 2/2] [v2] net: abort network initialization if the PHY driver fails
Stephan Linz
- [U-Boot] [PATCH v2 1/7] dfu:usb: Support for g_dnl composite download gadget.
Marek Vasut
- [U-Boot] [PATCH v2 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget
Marek Vasut
- [U-Boot] [PATCH v2 3/7] dfu: DFU backend implementation
Marek Vasut
- [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation
Marek Vasut
- [U-Boot] [PATCH 2/2] [v2] net: abort network initialization if the PHY driver fails
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] pull request for u-boot-tegra/master
Tom Warren
- [U-Boot] [PATCH 09/12] microblaze: timer: Add device-tree driver configuration
Stephan Linz
- [U-Boot] [PATCH 08/12] microblaze: timer: Prepare for device-tree initialization
Stephan Linz
- [U-Boot] [PATCH] smsc95xx: align buffers to cache line size
Ilya Yanok
- [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Ilya Yanok
- [U-Boot] Please pull u-boot-ti/master
Tom Rini
- [U-Boot] Please pull u-boot-ti/next
Tom Rini
- [U-Boot] [PATCH V3 1/3] arm/davinci: fix DDR2/mDDR memory controller initialization for Omap L138
Mikhail Kshevetskiy
- [U-Boot] [PATCH V3 2/3] arm/davinci/da850: add uart0 pinmux
Mikhail Kshevetskiy
- [U-Boot] [PATCH 2/2] [v3] net: abort network initialization if the PHY driver fails
Timur Tabi
- [U-Boot] [PATCH V3 3/3] serial/ns16550: ns16550 has a different register layout on SOC_DA8XX
Mikhail Kshevetskiy
- [U-Boot] [PATCH V3 1/2] mtd/spi/spi_flash: support CMD_READ_ID=0x90 case
Mikhail Kshevetskiy
- [U-Boot] [PATCH V3 2/2] mtd/spi: add sst25l driver
Mikhail Kshevetskiy
- [U-Boot] [PATCH V3 1/3] MMC: u-boot-spl may be compiled without partition support
Mikhail Kshevetskiy
- [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection
Mikhail Kshevetskiy
- [U-Boot] [PATCH V3 3/3] arm/davinci: spl - add compressed u-boot image support
Mikhail Kshevetskiy
- [U-Boot] [PATCH 08/12] microblaze: timer: Prepare for device-tree initialization
Stephan Linz
- [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration
Wolfgang Denk
- [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration
Wolfgang Denk
- [U-Boot] sha256_crypt for uboot
Wolfgang Denk
- [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection
Tom Rini
- [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration
Wolfgang Denk
- [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash
Fabio Estevam
- [U-Boot] [ARM] one warning left for all ARM boards
Wolfgang Denk
- [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size
Stefan Herbrechtsmeier
- [U-Boot] random errors in kernel or rootfs;u-boot check sum
Wolfgang Denk
- [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection
Mikhail Kshevetskiy
- [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection
Tom Rini
- [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection
Mikhail Kshevetskiy
- [U-Boot] Please pull u-boot-ti/master
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/next
Albert ARIBAUD
- [U-Boot] pull request for u-boot-tegra/master
Albert ARIBAUD
- [U-Boot] [ARM] one warning left for all ARM boards
Tom Rini
- [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration
Prafulla Wadaskar
- [U-Boot] [ARM] one warning left for all ARM boards
Albert ARIBAUD
- [U-Boot] [ARM] one warning left for all ARM boards
Tom Rini
- [U-Boot] [PATCH 01/12] microblaze: board: Remove compilation warning
Simon Glass
- [U-Boot] [PATCH 02/12] microblaze: Remove extern from board.c
Simon Glass
- [U-Boot] U-boot Porting
Daniel Schwierzeck
- [U-Boot] [PATCH 03/12] microblaze: intc: Clear interrupt code
Simon Glass
- [U-Boot] [PATCH 04/12] microblaze: intc: Registering interrupt should return value
Simon Glass
- [U-Boot] [PATCH 05/12] microblaze: intc: Coding style cleanup
Simon Glass
- [U-Boot] [PATCH 06/12] microblaze: intc: Add device-tree driver configuration
Simon Glass
- [U-Boot] [PATCH 07/12] microblaze: Move __udelay implementation
Simon Glass
- [U-Boot] [PATCH 09/12] microblaze: timer: Add device-tree driver configuration
Simon Glass
- [U-Boot] [PATCH 10/12] microblaze: Call serial multi initialization
Simon Glass
- [U-Boot] [PATCH 1/3] fdt: Add board specific dts inclusion
Simon Glass
- [U-Boot] [PATCH 3/3] microblaze: Wire up OF support for emaclite
Simon Glass
- [U-Boot] [ARM] one warning left for all ARM boards
Albert ARIBAUD
- [U-Boot] [PATCH v2] arm: cm4008, cm41xx: set gd->ram_size in dram_init
Albert ARIBAUD
- [U-Boot] [PULL] u-boot-usb/master
Wolfgang Denk
- [U-Boot] [PATCH] Add support for DS1388.
Wolfgang Denk
- [U-Boot] [PATCH 02/13] S3C64XX: Switch to use readl/writel to operate nand flash
Scott Wood
- [U-Boot] [PATCH 07/13] S3C6400: Delete nand_spl for S3C6400
Scott Wood
- [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb
Allen Martin
- [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb
Graeme Russ
- [U-Boot] [PATCH 1/1] igep0020: set OMAP MUX mcspi1_cs2 pin to GPIO 176 mode
Javier Martinez Canillas
- [U-Boot] [ARM] one warning left for all ARM boards
Marek Vasut
- [U-Boot] [PATCH 2/2] [v3] net: abort network initialization if the PHY driver fails
Marek Vasut
- [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Marek Vasut
- [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size
Marek Vasut
- [U-Boot] USB detection
Marek Vasut
- [U-Boot] [PATCH] smsc95xx: align buffers to cache line size
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Wolfgang Denk
- [U-Boot] [PATCH 1/2] tools, config.mk: add binutils-version
Allen Martin
- [U-Boot] [PATCH 2/2] arm: work around assembler bug
Allen Martin
- [U-Boot] [PATCH 2/2] arm: work around assembler bug
Graeme Russ
- [U-Boot] [PATCH] EXYNOS: Fix USB compiler warning
Rajeshwari Shinde
- [U-Boot] [PATCH] EXYNOS: Fix USB compiler warning
Marek Vasut
- [U-Boot] [PATCH] EXYNOS: Fix USB compiler warning
Jaehoon Chung
- [U-Boot] [PATCH] EXYNOS: Fix USB compiler warning
Rajeshwari Birje
- [U-Boot] [PATCH 2/2] arm: work around assembler bug
Albert ARIBAUD
- [U-Boot] Pull request: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH] EXYNOS: Fix USB compiler warning
Wolfgang Denk
- [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size
Stefan Herbrechtsmeier
- [U-Boot] Pull request: u-boot-arm/master
Wolfgang Denk
- [U-Boot] [PATCH v2] Consolidate bootcount code into drivers/bootcount
Wolfgang Denk
- [U-Boot] [PATCH] ARM: EXYNOS: fixed compiler warning message
Jaehoon Chung
- [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size
Marek Vasut
- [U-Boot] [STATUS] v2012.07-rc1 is out - release date July 23
Wolfgang Denk
- [U-Boot] [PATCH 1/3] fdt: Add board specific dts inclusion
Michal Simek
- [U-Boot] [PATCH 2/3] microblaze: Wire up dts configuration
Michal Simek
- [U-Boot] [PATCH 3/3] microblaze: Wire up OF support for emaclite
Michal Simek
- [U-Boot] [PATCH 08/12] microblaze: timer: Prepare for device-tree initialization
Michal Simek
- [U-Boot] [PATCH 08/12] microblaze: timer: Prepare for device-tree initialization
Michal Simek
- [U-Boot] [PATCH 01/12] microblaze: board: Remove compilation warning
Michal Simek
- [U-Boot] [PATCH 02/12] microblaze: Remove extern from board.c
Michal Simek
- [U-Boot] [PATCH 07/12] microblaze: Move __udelay implementation
Michal Simek
- [U-Boot] [PATCH 10/12] microblaze: Call serial multi initialization
Michal Simek
- [U-Boot] [PATCH v2 0/7] dfu:usb: Composite USB download gadget with DFU function
Lukasz Majewski
- [U-Boot] [PATCH 03/12] microblaze: intc: Clear interrupt code
Michal Simek
- [U-Boot] [ARM] one warning left for all ARM boards
Tom Rini
- [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation
Tom Rini
- [U-Boot] [ARM] one warning left for all ARM boards
Ilya Yanok
- [U-Boot] [PATCH] smsc95xx: align buffers to cache line size
Ilya Yanok
- [U-Boot] [PATCH 04/12] microblaze: intc: Registering interrupt should return value
Michal Simek
- [U-Boot] [ARM] one warning left for all ARM boards
Tom Rini
- [U-Boot] [PATCH 05/12] microblaze: intc: Coding style cleanup
Michal Simek
- [U-Boot] [PATCH 06/12] microblaze: intc: Add device-tree driver configuration
Michal Simek
- [U-Boot] [PATCH 09/12] microblaze: timer: Add device-tree driver configuration
Michal Simek
- [U-Boot] [PATCH] i2c: deblock i2c bus also if accessed before realocation
Holger Brunck
- [U-Boot] [PATCH v2 0/7] dfu:usb: Composite USB download gadget with DFU function
Marek Vasut
- [U-Boot] [PATCH 09/12] microblaze: timer: Add device-tree driver configuration
Michal Simek
- [U-Boot] [PATCH] smsc95xx: align buffers to cache line size
Marek Vasut
- [U-Boot] [PATCH] i2c: deblock i2c bus also if accessed before realocation
Heiko Schocher
- [U-Boot] [STATUS] v2012.07-rc1 is out - release date July 23
Marek Vasut
- [U-Boot] [PATCH] fdt: Include arch specific gpio.h
Michal Simek
- [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration
Prafulla Wadaskar
- [U-Boot] FDT driver initialization function declaration
Michal Simek
- [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation
Lukasz Majewski
- [U-Boot] [PATCH] net: fix typo in arp clean up
Mike Frysinger
- [U-Boot] [PATCH] smsc95xx: align buffers to cache line size
Ilya Yanok
- [U-Boot] FDT driver initialization function declaration
Wolfgang Denk
- [U-Boot] [PATCH v2] arm: cm4008, cm41xx: set gd->ram_size in dram_init
Greg Ungerer
- [U-Boot] FDT driver initialization function declaration
Michal Simek
- [U-Boot] [PATCH 02/13] S3C64XX: Switch to use readl/writel to operate nand flash
Zhong Hongbo
- [U-Boot] FDT driver initialization function declaration
Marek Vasut
- [U-Boot] FDT driver initialization function declaration
Wolfgang Denk
- [U-Boot] FDT driver initialization function declaration
Marek Vasut
- [U-Boot] FDT driver initialization function declaration
Marek Vasut
- [U-Boot] FDT driver initialization function declaration
Simon Glass
- [U-Boot] FDT driver initialization function declaration
Simon Glass
- [U-Boot] FDT driver initialization function declaration
Michal Simek
- [U-Boot] FDT driver initialization function declaration
Michal Simek
- [U-Boot] FDT driver initialization function declaration
Wolfgang Denk
- [U-Boot] FDT driver initialization function declaration
Michal Simek
- [U-Boot] FDT driver initialization function declaration
Michal Simek
- [U-Boot] Issue with running commands
Sughosh Ganu
- [U-Boot] [U-Boot-DM] FDT driver initialization function declaration
Marek Vasut
- [U-Boot] FDT driver initialization function declaration
Marek Vasut
- [U-Boot] FDT driver initialization function declaration
Marek Vasut
- [U-Boot] [PATCH 02/13] S3C64XX: Switch to use readl/writel to operate nand flash
Scott Wood
- [U-Boot] [PATCH] smsc95xx: align buffers to cache line size
Marek Vasut
- [U-Boot] [PATCH 2/2] [v3] net: abort network initialization if the PHY driver fails
Joe Hershberger
- [U-Boot] Dreamplug v10 uboot
Steven McGrath
- [U-Boot] [PATCH] beagle: only call DSS code when #defined CONFIG_VIDEO_OMAP3
Peter Meerwald
- [U-Boot] [PATCH 2/2] [v3] net: abort network initialization if the PHY driver fails
Timur Tabi
- [U-Boot] Dreamplug v10 uboot
Luka Perkov
- [U-Boot] [PATCH v2 1/2] tools, config.mk: add binutils-version
Allen Martin
- [U-Boot] [PATCH v2 2/2] arm: work around assembler bug
Allen Martin
- [U-Boot] Dreamplug v10 uboot
Steven McGrath
- [U-Boot] [PATCH v2 2/2] arm: work around assembler bug
Tom Rini
- [U-Boot] [PATCH v2 2/2] arm: work around assembler bug
Allen Martin
- [U-Boot] [PATCH v2 2/2] arm: work around assembler bug
Tom Rini
- [U-Boot] RMLL/LSM 2012 - U-Boot Developer's Meeting
Marek Vasut
- [U-Boot] [PATCH v3] usb_storage: fix ehci driver max transfer size
Stefan Herbrechtsmeier
- [U-Boot] [PATCH v3] usb_storage: fix ehci driver max transfer size
Stefan Herbrechtsmeier
- [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size
Marek Vasut
- [U-Boot] [PATCH v2 2/2] arm: work around assembler bug
Allen Martin
- [U-Boot] [PATCH v2 2/2] arm: work around assembler bug
Tom Rini
- [U-Boot] [PATCH] beagle: only call DSS code when #defined CONFIG_VIDEO_OMAP3
Tom Rini
- [U-Boot] [PATCH] beagle: only call DSS code when #defined CONFIG_VIDEO_OMAP3
Peter Meerwald
- [U-Boot] [PATCH] net: bugfix: NetSetTimeout assumes CONFIG_SYS_HZ=1000
Joe Hershberger
- [U-Boot] [PATCH 2/2] [v3] net: abort network initialization if the PHY driver fails
Joe Hershberger
- [U-Boot] [PATCH 2/2] [v3] net: abort network initialization if the PHY driver fails
Timur Tabi
- [U-Boot] [PATCH RESEND] tftp: fix type of block arg to store_block
Joe Hershberger
- [U-Boot] [PATCH 08/12] microblaze: timer: Prepare for device-tree initialization
Stephan Linz
- [U-Boot] [PATCH 2/2] [v3] net: abort network initialization if the PHY driver fails
Joe Hershberger
- [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection
Sughosh Ganu
- [U-Boot] [PATCH V3 3/3] arm/davinci: spl - add compressed u-boot image support
Sughosh Ganu
- [U-Boot] [PATCH] net: fix typo in arp clean up
Joe Hershberger
- [U-Boot] Pull request: u-boot-net/master
Joe Hershberger
- [U-Boot] [PATCH v3 1/2] tools, config.mk: add binutils-version
Allen Martin
- [U-Boot] [PATCH v3 2/2] arm: work around assembler bug
Allen Martin
- [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash
Hornung, Michael
- [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection
Mikhail Kshevetskiy
- [U-Boot] [PATCH V3 3/3] arm/davinci: spl - add compressed u-boot image support
Mikhail Kshevetskiy
- [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration
Joe Hershberger
- [U-Boot] [PATCH RESEND] tftp: fix type of block arg to store_block
Wolfgang Denk
- [U-Boot] [PATCH RESEND] tftp: fix type of block arg to store_block
Joe Hershberger
- [U-Boot] Dreamplug v10 uboot
Steven McGrath
- [U-Boot] [PATCH 06/12] microblaze: intc: Add device-tree driver configuration
Simon Glass
- [U-Boot] [PATCH 09/12] microblaze: timer: Add device-tree driver configuration
Simon Glass
- [U-Boot] [PATCH] fdt: Include arch specific gpio.h
Simon Glass
- [U-Boot] [PATCH v4] powerpc/p1022ds: Add sdcard and spi boot support to P1022DS
Andy Fleming
- [U-Boot] [PATCH 1/2] NET: NE2000: Cleanup IO accessors
Joe Hershberger
- [U-Boot] U-boot Porting
Aaron Williams
- [U-Boot] Dreamplug v10 uboot
Steven McGrath
- [U-Boot] [PATCH V2 1/1] net: phy: micrel: make ksz9021 phy accessible
Troy Kisky
- [U-Boot] [PATCH v2 06/19] tegra: Add display support to funcmux
Simon Glass
- [U-Boot] [PATCH] ARM: EXYNOS: fixed compiler warning message
Rajeshwari Birje
- [U-Boot] [PATCH v2 07/19] tegra: fdt: Add LCD definitions for Tegra
Simon Glass
- [U-Boot] [PATCH v2 08/19] tegra: Add support for PWFM
Simon Glass
- [U-Boot] [PATCH v2 10/19] tegra: Add LCD driver
Simon Glass
- [U-Boot] [PATCH v2 11/19] tegra: Add LCD support to Nvidia boards
Simon Glass
- [U-Boot] [PATCH v2 12/19] arm: Add control over cachability of memory regions
Simon Glass
- [U-Boot] [PATCH v2 14/19] lcd: Add support for flushing LCD fb from dcache after update
Simon Glass
- [U-Boot] [PATCH v2 03/19] fdt: Add function to look up a phandle's register address
Simon Glass
- [U-Boot] [PATCH v2 09/19] tegra: Add SOC support for display/lcd
Simon Glass
- [U-Boot] [PATCH 06/12] microblaze: intc: Add device-tree driver configuration
Michal Simek
- [U-Boot] [PATCH RESEND] tftp: fix type of block arg to store_block
Wolfgang Denk
- [U-Boot] [PATCH v2 07/19] tegra: fdt: Add LCD definitions for Tegra
Thierry Reding
- [U-Boot] U-boot Porting
Wolfgang Denk
- [U-Boot] [PATCH 08/12] microblaze: timer: Prepare for device-tree initialization
Michal Simek
- [U-Boot] FDT driver initialization function declaration
Michal Simek
- [U-Boot] FDT driver initialization function declaration
Michal Simek
- [U-Boot] [PATCH 09/12] microblaze: timer: Add device-tree driver configuration
Michal Simek
- [U-Boot] [PATCH] mx6qsabresd: Add basic support
Dirk Behme
- [U-Boot] [PATCH 1/3] mxc_i2c: specify i2c base address in config file
Dirk Behme
- [U-Boot] [PATCH 3/3] mxc_i2c: remove setting speed at each start
Dirk Behme
- [U-Boot] [PATCH V2] i.MX: fsl_esdhc: allow use with cache enabled.
Dirk Behme
- [U-Boot] [PATCH 1/3] common/cmd_rsmode.c: add imx reset mode command
Dirk Behme
- [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection
Sughosh Ganu
- [U-Boot] [PATCH] mx6: Make pad name macro consistent with the datasheet
Dirk Behme
- [U-Boot] [PATCH V2 1/1] net: phy: micrel: make ksz9021 phy accessible
Dirk Behme
- [U-Boot] [PATCH V3 1/2] Add env vars describing U-Boot target board
Wolfgang Denk
- [U-Boot] Dreamplug v10 uboot
Prafulla Wadaskar
- [U-Boot] [PATCH] mx6qsabresd: Add basic support
Fabio Estevam
- [U-Boot] [STATUS] v2012.07-rc1 is out - release date July 23
Jens Scharsig
- [U-Boot] [PATCH] fdt: Include arch specific gpio.h
Michal Simek
- [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection
Tom Rini
- [U-Boot] [PATCH V2 1/1] net: phy: micrel: make ksz9021 phy accessible
Prafulla Wadaskar
- [U-Boot] [PATCH 1/3] mxc_i2c: specify i2c base address in config file
Heiko Schocher
- [U-Boot] [PATCH 1/2 v2] SDHC/MMC: fix the wrong infomation after change SD card
Huang Changming-R66093
- [U-Boot] [PATCH 2/2 v3] FSL/eSDHC: enable the clock to detect the SD card
Huang Changming-R66093
- [U-Boot] [PATCH] SD/MMC: check the card status during erase operation
Huang Changming-R66093
- [U-Boot] FDT driver initialization function declaration
Michal Simek
- [U-Boot] [PATCH 09/12] microblaze: timer: Add device-tree driver configuration
Simon Glass
- [U-Boot] [i2c] Pull request
Heiko Schocher
- [U-Boot] [PATCH] fdt: Include arch specific gpio.h
Simon Glass
- [U-Boot] [PATCH v2 0/19] tegra: Add display driver and LCD support for Seaboard
Simon Glass
- [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection
Sughosh Ganu
- [U-Boot] [PATCH] fdt: Include arch specific gpio.h
Michal Simek
- [U-Boot] [PATCH] ARM: EXYNOS: fixed the wrong function argument.
Jaehoon Chung
- [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection
Tom Rini
- [U-Boot] [PATCH] fdt: Include arch specific gpio.h
Simon Glass
- [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection
Sughosh Ganu
- [U-Boot] [PATCH] fdt: Include arch specific gpio.h
Michal Simek
- [U-Boot] u-boot-2011.12 QorIQ P1013 + XIO2001 PCIE-PCI Bridge
BRUNMAYR Peter
- [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection
Tom Rini
- [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation
Tom Rini
- [U-Boot] [PATCH] fdt: Include arch specific gpio.h
Simon Glass
- [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection
Sughosh Ganu
- [U-Boot] [PATCH V3 2/3] arm/davinci: spl - boot device selection
Tom Rini
- [U-Boot] [PATCH] fdt: Include arch specific gpio.h
Michal Simek
- [U-Boot] [PATCH] fdt: Include arch specific gpio.h instead of asm-generic/gpio.h
Michal Simek
- [U-Boot] [PATCH v2] fdt: Include arch specific gpio.h instead of asm-generic/gpio.h
Michal Simek
- [U-Boot] [PATCH] fdt: Include arch specific gpio.h instead of asm-generic/gpio.h
Michal Simek
- [U-Boot] [PATCH 02/13] S3C64XX: Switch to use readl/writel to operate nand flash
Zhong Hongbo
- [U-Boot] Ethernet on PandaBoard
Gary Thomas
- [U-Boot] Ethernet on PandaBoard
Tetsuyuki Kobayashi
- [U-Boot] Ethernet on PandaBoard
Gary Thomas
- [U-Boot] Ethernet on PandaBoard
Tetsuyuki Kobayashi
- [U-Boot] Ethernet on PandaBoard
Gary Thomas
- [U-Boot] [PATCH 1/3] common/cmd_rsmode.c: add imx reset mode command
Troy Kisky
- [U-Boot] [PATCH v2] net/designware: Consecutive writes to the same register to be avoided
Joe Hershberger
- [U-Boot] [PATCH RESEND] tftp: fix type of block arg to store_block
Joe Hershberger
- [U-Boot] [PATCH v5] net: allow setting env enetaddr from net device setting
Joe Hershberger
- [U-Boot] [PATCH 1/2] phylib: phy_startup() should return an error code on failure
Joe Hershberger
- [U-Boot] [PATCH V2 1/1] net: phy: micrel: make ksz9021 phy accessible
Joe Hershberger
- [U-Boot] [PATCH V2 1/1] net: phy: micrel: make ksz9021 phy accessible
Joe Hershberger
- [U-Boot] Pull request: u-boot-net.git next
Joe Hershberger
- [U-Boot] [PATCH 1/3] common/cmd_rsmode.c: add imx reset mode command
Dirk Behme
- [U-Boot] [PATCH V2 1/1] net: phy: micrel: make ksz9021 phy accessible
Troy Kisky
- [U-Boot] [PATCH V2 1/1] net: phy: micrel: make ksz9021 phy accessible
Joe Hershberger
- [U-Boot] Need help to get u-boot running on the taskit stamp9g20
Markus Hubig
- [U-Boot] [PATCH v2 0/2] GPIO driver for BCM2835 SoC
Vikram Narayanan
- [U-Boot] [PATCH v2 1/2] bcm: Add GPIO driver
Vikram Narayanan
- [U-Boot] [PATCH v2 2/2] rbpi: Add BCM2835 GPIO driver for raspberry pi
Vikram Narayanan
- [U-Boot] [PATCH] fdt: Include arch specific gpio.h
Joe Hershberger
- [U-Boot] [PATCH V3 1/2] Add env vars describing U-Boot target board
Joe Hershberger
- [U-Boot] [PATCH V3 1/2] Add env vars describing U-Boot target board
Tom Warren
- [U-Boot] [PATCH V3 1/2] Add env vars describing U-Boot target board
Joe Hershberger
- [U-Boot] [PATCH] fdt: Include arch specific gpio.h
Simon Glass
- [U-Boot] [PATCH] fdt: Include arch specific gpio.h
Michal Simek
- [U-Boot] [PATCH] fdt: Include arch specific gpio.h
Simon Glass
- [U-Boot] Need help to get u-boot running on the taskit stamp9g20
Wolfgang Denk
- [U-Boot] [PATCH V3 1/2] Add env vars describing U-Boot target board
Wolfgang Denk
- [U-Boot] USB detection
Manukumar
- [U-Boot] Pull request: u-boot-net/master
Wolfgang Denk
- [U-Boot] [i2c] Pull request
Wolfgang Denk
- [U-Boot] [PATCH v4] Correct corrupted NAND Flash access on KARO TX25 modules
Gachet Daniel
- [U-Boot] [PATCH v4] Correct corrupted NAND Flash access on KARO TX25 modules
Gachet Daniel
- [U-Boot] Pull request: u-boot-net.git next
Wolfgang Denk
- [U-Boot] [U-Boot-DM] FDT driver initialization function declaration
Pavel Herrmann
- [U-Boot] [RFC][PATCH v3] net: nfs: make NFS_TIMEOUT configurable
Tetsuyuki Kobayashi
- [U-Boot] [PATCH V3 3/3] serial/ns16550: ns16550 has a different register layout on SOC_DA8XX
Sughosh Ganu
- [U-Boot] [PATCH V3 2/3] arm/davinci/da850: add uart0 pinmux
Sughosh Ganu
- [U-Boot] [PATCH v2 07/19] tegra: fdt: Add LCD definitions for Tegra
Simon Glass
- [U-Boot] [U-Boot-DM] FDT driver initialization function declaration
Michal Simek
- [U-Boot] [PATCH v2 07/19] tegra: fdt: Add LCD definitions for Tegra
Thierry Reding
- [U-Boot] Ethernet on PandaBoard
Tom Rini
- [U-Boot] [PATCH v2 07/19] tegra: fdt: Add LCD definitions for Tegra
Alex Courbot
- [U-Boot] Need help to get u-boot running on the taskit stamp9g20
Andreas Bießmann
- [U-Boot] [PATCH v2] arm: cm4008, cm41xx: set gd->ram_size in dram_init
Andreas Bießmann
- [U-Boot] Ethernet on PandaBoard
Tom Rini
- [U-Boot] [PATCH v2] arm: cm4008, cm41xx: set gd->ram_size in dram_init
Andreas Bießmann
- [U-Boot] [V3] arm: Fix to mistake clean the memory space
Andreas Bießmann
- [U-Boot] [PATCH] powerpc/sgmii: To support PHY link state auto detect in SGMII mode
Jia Hongtao
- [U-Boot] [PATCH v4] Correct corrupted NAND Flash access on KARO TX25 modules
Wolfgang Denk
- [U-Boot] [PATCH] powerpc/sgmii: To support PHY link state auto detect in SGMII mode
Jia Hongtao-B38951
- [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation
Lukasz Majewski
- [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation
Tom Rini
- [U-Boot] [PATCH] dts/Makefile: Check for empty $(LDSCRIPT)
Horst Kronstorfer
- [U-Boot] Ethernet on PandaBoard
Gary Thomas
- [U-Boot] Ethernet on PandaBoard
Tom Rini
- [U-Boot] Ethernet on PandaBoard
Gary Thomas
- [U-Boot] Ethernet on PandaBoard
Tom Rini
- [U-Boot] Ethernet on PandaBoard
Gary Thomas
- [U-Boot] Ethernet on PandaBoard
Gary Thomas
- [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available
Gary Thomas
- [U-Boot] [PATCH v3 0/18] tegra: Add display driver and LCD support for Seaboard
Simon Glass
- [U-Boot] [PATCH v3 01/18] fdt: Tidy debugging, add to fdtdec_get_int/addr()
Simon Glass
- [U-Boot] [PATCH v3 02/18] fdt: Add header guard to fdtdec.h
Simon Glass
- [U-Boot] [PATCH v3 03/18] tegra: Use const for pinmux_config_pingroup/table()
Simon Glass
- [U-Boot] [PATCH v3 04/18] tegra: Add display support to funcmux
Simon Glass
- [U-Boot] [PATCH v3 05/18] tegra: fdt: Add pwm binding and node
Simon Glass
- [U-Boot] [PATCH v3 06/18] tegra: fdt: Add LCD definitions for Tegra
Simon Glass
- [U-Boot] [PATCH v3 07/18] tegra: Add support for PWM
Simon Glass
- [U-Boot] [PATCH v3 08/18] tegra: Add SOC support for display/lcd
Simon Glass
- [U-Boot] [PATCH v3 09/18] tegra: Add LCD driver
Simon Glass
- [U-Boot] [PATCH v3 10/18] tegra: Add LCD support to Nvidia boards
Simon Glass
- [U-Boot] [PATCH v3 11/18] arm: Add control over cachability of memory regions
Simon Glass
- [U-Boot] [PATCH v3 12/18] lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment
Simon Glass
- [U-Boot] [PATCH v3 13/18] lcd: Add support for flushing LCD fb from dcache after update
Simon Glass
- [U-Boot] [PATCH v3 14/18] tegra: Align LCD frame buffer to section boundary
Simon Glass
- [U-Boot] [PATCH v3 15/18] tegra: Support control of cache settings for LCD
Simon Glass
- [U-Boot] [PATCH v3 16/18] tegra: fdt: Add LCD definitions for Seaboard
Simon Glass
- [U-Boot] [PATCH v3 17/18] lcd: Add CONSOLE_SCROLL_LINES option to speed console
Simon Glass
- [U-Boot] [PATCH v3 18/18] tegra: Enable display/lcd support on Seaboard
Simon Glass
- [U-Boot] Need help to get u-boot running on the taskit stamp9g20
Markus Hubig
- [U-Boot] Need help to get u-boot running on the taskit stamp9g20
Markus Hubig
- [U-Boot] [RFC][PATCH v3] net: nfs: make NFS_TIMEOUT configurable
Joe Hershberger
- [U-Boot] Ethernet on PandaBoard
Tom Rini
- [U-Boot] [RFC][PATCH v3] net: nfs: make NFS_TIMEOUT configurable
Tom Rini
- [U-Boot] [PATCH] fdt: Include arch specific gpio.h
Joe Hershberger
- [U-Boot] [RFC][PATCH v3] net: nfs: make NFS_TIMEOUT configurable
Joe Hershberger
- [U-Boot] Ethernet on PandaBoard
Gary Thomas
- [U-Boot] [PATCH] powerpc/mpc85xx: Change NMG_CPU_A011 workaround condition
York Sun
- [U-Boot] [PATCH v3 11/18] arm: Add control over cachability of memory regions
Albert ARIBAUD
- [U-Boot] [PATCH] beagle: only call DSS code when #defined CONFIG_VIDEO_OMAP3
Albert ARIBAUD
- [U-Boot] Intro guide for configuring U-Boot for a custom board?
Luciano Moretti
- [U-Boot] [PATCH] beagle: only call DSS code when #defined CONFIG_VIDEO_OMAP3
Tom Rini
- [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb
Albert ARIBAUD
- [U-Boot] [V4] arm: Fix to mistake clean the memory space
Albert ARIBAUD
- [U-Boot] [PATCH v2] arm: cm4008, cm41xx: Fix ROM relocation
Albert ARIBAUD
- [U-Boot] Where to put a large bootloader-supplied device tree on ARM ?
Rob Herring
- [U-Boot] Where to put a large bootloader-supplied device tree on ARM ?
Albert ARIBAUD
- [U-Boot] Intro guide for configuring U-Boot for a custom board?
Albert ARIBAUD
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Timur Tabi
- [U-Boot] Where to put a large bootloader-supplied device tree on ARM ?
Wolfgang Denk
- [U-Boot] [RFC][PATCH v3] net: nfs: make NFS_TIMEOUT configurable
Tetsuyuki Kobayashi
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
sun york-R58495
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Scott Wood
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Timur Tabi
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
sun york-R58495
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Scott Wood
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Timur Tabi
- [U-Boot] Need help to get u-boot running on the taskit stamp9g20
Andreas Bießmann
- [U-Boot] Where to put a large bootloader-supplied device tree on ARM ?
Rob Herring
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Wolfgang Denk
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Wolfgang Denk
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
sun york-R58495
- [U-Boot] problem on BL1.bin
VISWANADHULA BALAJI
- [U-Boot] [PATCH] fdt: Include arch specific gpio.h
Michal Simek
- [U-Boot] [PATCH] Add support for DS1388.
Kenth Eriksson
- [U-Boot] problem on BL1.bin
Wolfgang Denk
- [U-Boot] Where to put a large bootloader-supplied device tree on ARM ?
Albert ARIBAUD
- [U-Boot] ksz9021 phy support
Schneider, Kolja
- [U-Boot] ksz9021 phy support
Dirk Behme
- [U-Boot] problem on BL1.bin
Chander Kashyap
- [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation
Marek Vasut
- [U-Boot] FDT driver initialization function declaration
Marek Vasut
- [U-Boot] [PATCH 2/2 v3] FSL/eSDHC: enable the clock to detect the SD card
Marek Vasut
- [U-Boot] [PATCH V2] i.MX: fsl_esdhc: allow use with cache enabled.
Marek Vasut
- [U-Boot] [PATCH 3/3] mxc_i2c: remove setting speed at each start
Marek Vasut
- [U-Boot] [U-Boot-DM] FDT driver initialization function declaration
Tomas Hlavacek
- [U-Boot] [PATCH 1/2] NET: NE2000: Cleanup IO accessors
Marek Vasut
- [U-Boot] [U-Boot-DM] FDT driver initialization function declaration
Marek Vasut
- [U-Boot] [PATCH 3/3] mxc_i2c: remove setting speed at each start
Wolfgang Denk
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Tabi Timur-B04825
- [U-Boot] [PATCH 3/3] mxc_i2c: remove setting speed at each start
Marek Vasut
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Tabi Timur-B04825
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Tabi Timur-B04825
- [U-Boot] __led_set usage is inconsistent
Holger Freyther
- [U-Boot] [PATCH] dts/Makefile: Turn off system-/gcc-specific predefined macros
Horst Kronstorfer
- [U-Boot] Doubt on uboot code
VISWANADHULA BALAJI
- [U-Boot] [PATCH] cfb_console: Add support for some ANSI terminal escape codes
Pali Rohár
- [U-Boot] V2 S3c64xx: Switch all I/O to use readl/writel functio and Clear variable
Zhong Hongbo
- [U-Boot] [V2 01/15] SMDK6400: Move smdk6400 board from Makefile to boards.cfg
Zhong Hongbo
- [U-Boot] [V2 02/15] S3C64XX: Switch to use readl/writel to operate nand flash
Zhong Hongbo
- [U-Boot] [V2 03/15] S3C64XX: Use readl/writel to operate uart
Zhong Hongbo
- [U-Boot] =?yes?q?=5BV2=2004/15=5D=20S3C64XX=3A=20add=20pwm=20for=20s3c64xx=20support?=
Zhong Hongbo
- [U-Boot] [V2 05/15] S3C64XX: reference s5p cpu time system for s3c64xx timer
Zhong Hongbo
- [U-Boot] [V2 06/15] S3C64xx: mov cpu_init.S to the board directory
Zhong Hongbo
- [U-Boot] [V2 07/15] S3C6400: Delete nand_spl for S3C6400
Zhong Hongbo
- [U-Boot] [V2 08/15] S3C6400: Adopt SPL framwork to support spl for nand flash
Zhong Hongbo
- [U-Boot] [V2 09/15] arm1176: Fixed No relocation.
Zhong Hongbo
- [U-Boot] [V2 10/15] S3C64XX: Change SROM init to use read/write operation
Zhong Hongbo
- [U-Boot] [V2 11/15] S3C64XX: Switch to use read/writel to operation clock system
Zhong Hongbo
- [U-Boot] [V2 12/15] S3c64xx: clear GPIO, Interrupt, Watchdog variable.
Zhong Hongbo
- [U-Boot] [V2 13/15] S3C6400: clear memory init variable
Zhong Hongbo
- [U-Boot] [V2 14/15] S3C64XX: Move s3c6400.h to cpu.h to support s3c6410 board
Zhong Hongbo
- [U-Boot] [V2 15/15] S3C6400: Remove the unused variable for S3C6400
Zhong Hongbo
- [U-Boot] [V2 04/15] S3C64XX: add pwm for s3c64xx support
Zhong Hongbo
- [U-Boot] uboot for zyxel nsa320
kqt4at5v at gmail.com
- [U-Boot] [PATCH 1/2] sf: stmicro: support JEDEC standard two-byte signature
Stephan Linz
- [U-Boot] [PATCH 2/2] sf: stmicro: add support N25Q128 parts
Stephan Linz
- [U-Boot] [PATCH] part_mac: dcache: allocate cacheline-aligned buffers
Benoît Thébaudeau
- [U-Boot] [PATCH u-boot-arm/next 1/2] OMAP3: igep00x0: Add config option to choose flash storage memory
Javier Martinez Canillas
- [U-Boot] [PATCH u-boot-arm/next 2/2] OMAP3: igep00x0: add SPL support for IGEP-based boards
Javier Martinez Canillas
- [U-Boot] [PATCH v2] ARM: Remove unused stack and irq config defines
Rob Herring
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
York Sun
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Wolfgang Denk
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Wolfgang Denk
- [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation
Andy Fleming
- [U-Boot] Doubt on uboot code
Wolfgang Denk
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Timur Tabi
- [U-Boot] [PATCH 1/2 v2] SDHC/MMC: fix the wrong infomation after change SD card
Andy Fleming
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Wolfgang Denk
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Timur Tabi
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Scott Wood
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Timur Tabi
- [U-Boot] Please pull u-boot-mmc.git
Andy Fleming
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Scott Wood
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Timur Tabi
- [U-Boot] [PATCH 1/2] spi: microblaze: Adds driver for Xilinx SPI controller
Stephan Linz
- [U-Boot] [PATCH 2/2] microblaze: Wire up SPI driver
Stephan Linz
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Scott Wood
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Timur Tabi
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Scott Wood
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Wolfgang Denk
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Wolfgang Denk
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Scott Wood
- [U-Boot] uboot for zyxel nsa320
Luka Perkov
- [U-Boot] [PATCH 1/2 v2] SDHC/MMC: fix the wrong infomation after change SD card
Marek Vasut
- [U-Boot] FDT driver initialization function declaration
Simon Glass
- [U-Boot] [PATCH 0/17] tegra: Add display driver and LCD support for Seaboard
Simon Glass
- [U-Boot] uboot for zyxel nsa320
kqt4at5v at gmail.com
- [U-Boot] uboot for zyxel nsa320
Luka Perkov
- [U-Boot] uboot for zyxel nsa320
kqt4at5v at gmail.com
- [U-Boot] i.MX dcache issues
Benoît Thébaudeau
- [U-Boot] i.MX dcache issues
Benoît Thébaudeau
- [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Ilya Yanok
- [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Ilya Yanok
- [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size
Ilya Yanok
- [U-Boot] [PATCH] nds32: split common cache access from cpu into lib
Macpaul Lin
- [U-Boot] i.MX dcache issues
Dirk Behme
- [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Marek Vasut
- [U-Boot] [PATCH] nds32: split common cache access from cpu into lib
Marek Vasut
- [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size
Marek Vasut
- [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size
Ilya Yanok
- [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Ilya Yanok
- [U-Boot] [PATCH 2/2] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Marek Vasut
- [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size
Marek Vasut
- [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size
Marek Vasut
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Tabi Timur-B04825
- [U-Boot] DaVinci PHYs
Marek Vasut
- [U-Boot] i.MX dcache issues
Stefano Babic
- [U-Boot] i.MX dcache issues
Stefano Babic
- [U-Boot] i.MX dcache issues
Benoît Thébaudeau
- [U-Boot] [PATCH V2 0/8] Fixes to EHCI cache handling & smsc95xx
Ilya Yanok
- [U-Boot] [PATCH V2 1/8] ehci-omap: Do not call dcache_off from omap_ehci_hcd_init
Ilya Yanok
- [U-Boot] [PATCH V2 2/8] common.h: Introduce DEFINE_CACHE_ALIGN_BUFFER
Ilya Yanok
- [U-Boot] [PATCH V2 3/8] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Ilya Yanok
- [U-Boot] [PATCH V2 4/8] ehci-hcd: fix external buffer cache handling
Ilya Yanok
- [U-Boot] [PATCH V2 5/8] usb: pass cache-aligned buffer to usb_get_descriptor()
Ilya Yanok
- [U-Boot] [PATCH V2 6/8] usb: check return value of submit_{control, bulk}_msg
Ilya Yanok
- [U-Boot] [PATCH V2 7/8] ehci-hcd: change debug() to printf() in case of errors
Ilya Yanok
- [U-Boot] [PATCH V2 8/8] smsc95xx: align buffers to cache line size
Ilya Yanok
- [U-Boot] i.MX dcache issues
Benoît Thébaudeau
- [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size
Ilya Yanok
- [U-Boot] [PATCH V2 3/8] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Marek Vasut
- [U-Boot] [PATCH V2 3/8] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Ilya Yanok
- [U-Boot] Uboot and initramfs
Wojtek
- [U-Boot] [PATCH] tools: add kwboot binary to .gitignore file
Luka Perkov
- [U-Boot] [PATCH V2 3/8] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Marek Vasut
- [U-Boot] [PATCH v2 1/2] bcm: Add GPIO driver
Stephen Warren
- [U-Boot] [PATCH V2 4/8] ehci-hcd: fix external buffer cache handling
Marek Vasut
- [U-Boot] [PATCH] nds32: split common cache access from cpu into lib
Macpaul Lin
- [U-Boot] [PATCH] tools: add kwboot binary to .gitignore file
Prafulla Wadaskar
- [U-Boot] i.MX dcache issues
Dirk Behme
- [U-Boot] USB on mx53
Stefano Babic
- [U-Boot] DaVinci PHYs
Heiko Schocher
- [U-Boot] [PATCH V2 3/8] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Ilya Yanok
- [U-Boot] [PATCH] ehci-hcd: program asynclistaddr before every transfer
Ilya Yanok
- [U-Boot] [PATCH V2a 3/8] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Ilya Yanok
- [U-Boot] [PATCH v2 0/4] mmc: Support designWare Controller
Minkyu Kang
- [U-Boot] [PATCH 3/3] mxc_i2c: remove setting speed at each start
Stefano Babic
- [U-Boot] [PATCH] kirkwood: add support for Iomega iConnect board
Luka Perkov
- [U-Boot] [PATCH V2 3/8] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Marek Vasut
- [U-Boot] [PATCH v2 1/2] imx: Use a clear identification of an unidentified CPU type
Stefano Babic
- [U-Boot] [PATCH v3 2/2] mxs: generalize code for print_cpuinfo()
Stefano Babic
- [U-Boot] [PATCH v2 0/4] Board support and feature for LaCie devices
Simon Guinot
- [U-Boot] [PATCH v3 2/2] mxs: generalize code for print_cpuinfo()
Otavio Salvador
- [U-Boot] DaVinci PHYs
Tom Rini
- [U-Boot] [PATCH 3/3 V2] MX28: SPI: Add DMA transfer support
Stefano Babic
- [U-Boot] [PATCH 1/3 V2] MX28: SPI: Refactor spi_xfer a bit
Stefano Babic
- [U-Boot] [PATCH 2/3 RESEND] MX28: SPI: Pull out the PIO transfer function
Stefano Babic
- [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration
Detlev Zundel
- [U-Boot] [PATCH u-boot-arm/next 1/2] OMAP3: igep00x0: Add config option to choose flash storage memory
Tom Rini
- [U-Boot] [PATCH u-boot-arm/next 2/2] OMAP3: igep00x0: add SPL support for IGEP-based boards
Tom Rini
- [U-Boot] DaVinci PHYs
Marek Vasut
- [U-Boot] [PATCH] Add support for eco5-pk ARM board
Raphael Assenat
- [U-Boot] DaVinci PHYs
Tom Rini
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Wolfgang Denk
- [U-Boot] [PATCH v3] i.MX28: extend print_cpuinfo() to use chip information
Otavio Salvador
- [U-Boot] [PATCH v3] i.MX28: extend print_cpuinfo() to use chip information
Marek Vasut
- [U-Boot] DaVinci PHYs
Marek Vasut
- [U-Boot] [PATCH v3] i.MX28: extend print_cpuinfo() to use chip information
Otavio Salvador
- [U-Boot] [RFC PATCH 0/2] i.MX28 SoC pending patches
Otavio Salvador
- [U-Boot] [RFC PATCH 1/2] i.MX28: Check if we are using a valid VBUS when initializing power
Otavio Salvador
- [U-Boot] [RFC PATCH 2/2] i.MX28: use a clear name for DDR2 initialization
Otavio Salvador
- [U-Boot] [RFC PATCH 1/2] i.MX28: Check if we are using a valid VBUS when initializing power
Marek Vasut
- [U-Boot] [RFC PATCH 2/2] i.MX28: use a clear name for DDR2 initialization
Marek Vasut
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Detlev Zundel
- [U-Boot] [PATCH v2] i.MX28: Check if we are using a valid VBUS for power initialization
Otavio Salvador
- [U-Boot] [RFC PATCH 1/2] i.MX28: Check if we are using a valid VBUS when initializing power
Otavio Salvador
- [U-Boot] [PATCH v2] i.MX28: Check if we are using a valid VBUS for power initialization
Marek Vasut
- [U-Boot] [PATCH v2] i.MX28: Check if we are using a valid VBUS for power initialization
Otavio Salvador
- [U-Boot] i.MX dcache issues
Marek Vasut
- [U-Boot] [PATCH] fsl: board EEPROM has the CRC in the wrong location
Scott Wood
- [U-Boot] [PATCH v7 00/15] split tegra20 arm7 code into separate SPL
Allen Martin
- [U-Boot] [PATCH v7 01/15] tegra20: rename tegra2 -> tegra20
Allen Martin
- [U-Boot] [PATCH v7 02/15] tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common
Allen Martin
- [U-Boot] [PATCH v7 03/15] tegra20: rename CONFIG_MACH_TEGRA_GENERIC
Allen Martin
- [U-Boot] [PATCH v7 04/15] tegra20: tec: add tegra20-common-post.h
Allen Martin
- [U-Boot] [PATCH v7 05/15] tegra20: make board mkdir commands unconditional
Allen Martin
- [U-Boot] [PATCH v7 06/15] mkconfig: add support for SPL CPU
Allen Martin
- [U-Boot] [PATCH v7 07/15] ARM: Fix arm720t SPL build
Allen Martin
- [U-Boot] [PATCH v7 08/15] tegra20: remove timer_init from SPL build
Allen Martin
- [U-Boot] [PATCH v7 09/15] ARM: add tegra20 support to arm720t
Allen Martin
- [U-Boot] [PATCH v7 10/15] tegra20: add u-boot-*-tegra.bin targets
Allen Martin
- [U-Boot] [PATCH v7 11/15] tegra20: move SDRAM param save to later in boot
Allen Martin
- [U-Boot] [PATCH v7 12/15] tegra20: enable SPL for tegra20 boards
Allen Martin
- [U-Boot] [PATCH v7 13/15] arm: enable libgcc build for SPL
Allen Martin
- [U-Boot] [PATCH v7 14/15] spl: fix SPL build of private libgcc
Allen Martin
- [U-Boot] [PATCH v7 15/15] tegra20: Remove armv4t build flags
Allen Martin
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Graeme Russ
- [U-Boot] [PATCH u-boot-arm/next 2/2] OMAP3: igep00x0: add SPL support for IGEP-based boards
Javier Martinez Canillas
- [U-Boot] [PATCH u-boot-arm/next 1/2] OMAP3: igep00x0: Add config option to choose flash storage memory
Javier Martinez Canillas
- [U-Boot] [PATCH u-boot-arm/next 1/2] OMAP3: igep00x0: Add config option to choose flash storage memory
Tom Rini
- [U-Boot] [PATCH u-boot-arm/next v2 1/1] OMAP3: igep00x0: add SPL support for IGEP-based boards
Javier Martinez Canillas
- [U-Boot] Pull request: u-boot-nios/master
Thomas Chou
- [U-Boot] [PATCH] video: support exynos fimd driver for various exynos series
Minkyu Kang
- [U-Boot] [PATCH v4 0/7] arm: rmobile: kzm9g: enable booting Linux kernel
Tetsuyuki Kobayshi
- [U-Boot] [PATCH v4 1/7] arm: rmobile: kzm9g: Modify sdram area
Tetsuyuki Kobayshi
- [U-Boot] [PATCH v4 2/7] arm: rmobile: kzm9g: Adjust low level hardware setting
Tetsuyuki Kobayshi
- [U-Boot] [PATCH v4 3/7] arm: rmobile: kzm9g: change prompt to board specific
Tetsuyuki Kobayshi
- [U-Boot] [PATCH v4 4/7] arm: rmobile: kzm9g: Add dummy member to struct sh73a0_rwdt
Tetsuyuki Kobayshi
- [U-Boot] [PATCH v4 5/7] MAINTAINERS: Add Tetsuyuki Kobayshi for kzm9g
Tetsuyuki Kobayshi
- [U-Boot] [PATCH v4 6/7] arm: rmobile: kzm9g: Modify bus controller setting for CS4
Tetsuyuki Kobayshi
- [U-Boot] [PATCH v4 7/7] arm: rmobile: kzm9g: enable reset command
Tetsuyuki Kobayshi
- [U-Boot] [PATCH u-boot-arm/next 1/2] OMAP3: igep00x0: Add config option to choose flash storage memory
Enric Balletbò i Serra
- [U-Boot] [PATCH u-boot-arm/next v2 1/1] OMAP3: igep00x0: add SPL support for IGEP-based boards
Enric Balletbò i Serra
- [U-Boot] [PATCH] ppc: Create a stack frame for wait_ticks()
Joakim Tjernlund
- [U-Boot] [PATCH v3] i.MX28: extend print_cpuinfo() to use chip information
Stefano Babic
- [U-Boot] [RFC PATCH 2/2] i.MX28: use a clear name for DDR2 initialization
Stefano Babic
- [U-Boot] USB enumeration problem on iMX53 hardware
Gérald Germain
- [U-Boot] [PATCH] ARM: OMAP4: PANDA: Fix the broken tftp issue.
R Sricharan
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Stefan Roese
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Graeme Russ
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Graeme Russ
- [U-Boot] [RFC PATCH 2/2] i.MX28: use a clear name for DDR2 initialization
Otavio Salvador
- [U-Boot] [RFC PATCH 2/2] i.MX28: use a clear name for DDR2 initialization
Stefano Babic
- [U-Boot] [RFC PATCH 2/2] i.MX28: use a clear name for DDR2 initialization
Otavio Salvador
- [U-Boot] [PATCH v2] nds32: split common cache access from cpu into lib
Macpaul Lin
- [U-Boot] [PATCH v2] i.MX28: use a clear name for DDR2 initialization
Otavio Salvador
- [U-Boot] [PATCH 0/17] tegra: Add display driver and LCD support for Seaboard
Thierry Reding
- [U-Boot] [PATCH V2 3/8] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Ilya Yanok
- [U-Boot] [PATCH 2/7] HACK: rearrange link order for thumb
Allen Martin
- [U-Boot] [PATCH v7 00/15] split tegra20 arm7 code into separate SPL
Tom Warren
- [U-Boot] [PATCH] mx6: Make pad name macro consistent with the datasheet
Stefano Babic
- [U-Boot] [PATCH 0/17] tegra: Add display driver and LCD support for Seaboard
Simon Glass
- [U-Boot] Please pull u-boot-mmc.git
Wolfgang Denk
- [U-Boot] Pull request: u-boot-nios/master
Wolfgang Denk
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Wolfgang Denk
- [U-Boot] Pull request: u-boot-video/next
Anatolij Gustschin
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Wolfgang Denk
- [U-Boot] Pull request: u-boot-video/next
Wolfgang Denk
- [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size
Marek Vasut
- [U-Boot] [PATCH 0/7] dfu:usb: Composite USB download gadget with DFU function
Marek Vasut
- [U-Boot] [PATCH V2 3/8] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment
Marek Vasut
- [U-Boot] Need help to get u-boot running on the taskit stamp9g20
Markus Hubig
- [U-Boot] [PATCH] ARM: OMAP4: PANDA: Fix the broken tftp issue.
Gary Thomas
- [U-Boot] [PATCH v2] usb_storage: fix ehci driver max transfer size
Stefan Herbrechtsmeier
- [U-Boot] [PATCH u-boot-arm/next v2 1/1] OMAP3: igep00x0: add SPL support for IGEP-based boards
Thomas Petazzoni
- [U-Boot] Please pull u-boot-ti/master for v2012.07
Tom Rini
- [U-Boot] [PATCH 1/7 V5] EXYNOS: CLK: Add i2c clock
Simon Glass
- [U-Boot] [PATCH 5/7 V5] I2C: Modify the I2C driver for EXYNOS5
Simon Glass
- [U-Boot] [PATCH 7/7 V5] CONFIG: SMDK5250: I2C: Enable I2C
Simon Glass
- [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available
Albert ARIBAUD
- [U-Boot] Modifying IP&mac address
Mike Frysinger
- [U-Boot] [PATCH v4 1/1] zfs: Add ZFS filesystem support
Mike Frysinger
- [U-Boot] [PATCH] tools: Fix mingw tools build
Mike Frysinger
- [U-Boot] [PATCH v2] fdt: Include arch specific gpio.h instead of asm-generic/gpio.h
Mike Frysinger
- [U-Boot] [PATCH u-boot-arm/next v2 1/1] OMAP3: igep00x0: add SPL support for IGEP-based boards
Javier Martinez Canillas
- [U-Boot] problem on BL1.bin
Mike Frysinger
- [U-Boot] [PATCH] tools: add kwboot binary to .gitignore file
Mike Frysinger
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Graeme Russ
- [U-Boot] [PATCH v3 1/2] tools, config.mk: add binutils-version
Allen Martin
- [U-Boot] [PATCH v3 2/2] arm: work around assembler bug
Allen Martin
- [U-Boot] [PATCH v3 2/2] arm: work around assembler bug
Allen Martin
- [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version
Allen Martin
- [U-Boot] [PATCH v4 2/2] arm: work around assembler bug
Allen Martin
- [U-Boot] [PATCH v7 00/15] split tegra20 arm7 code into separate SPL
Allen Martin
- [U-Boot] [PATCH v4 1/1] zfs: Add ZFS filesystem support
Jorgen Lundman
- [U-Boot] [PATCH v4 1/1] zfs: Add ZFS filesystem support
Graeme Russ
- [U-Boot] [PATCH v2] video: support exynos fimd driver for various exynos series
Donghwa Lee
- [U-Boot] [PATCH] ARM: EXYNOS: fixed the wrong function argument.
Minkyu Kang
- [U-Boot] [PATCH v4 1/1] zfs: Add ZFS filesystem support
Mike Frysinger
- [U-Boot] [PATCH] tools: clean up mingw ifdefs
Mike Frysinger
- [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version
Mike Frysinger
- [U-Boot] [PATCH v4 1/1] zfs: Add ZFS filesystem support
Jorgen Lundman
- [U-Boot] __led_set usage is inconsistent
Mike Frysinger
- [U-Boot] [PATCH] dts/Makefile: Turn off system-/gcc-specific predefined macros
Mike Frysinger
- [U-Boot] [PATCH] Makefile: change LIB to LIB-y
Mike Frysinger
- [U-Boot] [PATCH 1/3] Makefile: allow appending to LIB in sub-makefiles
Mike Frysinger
- [U-Boot] [PATCH 2/3] Makefile: replace LIBS by LIBS-y
Mike Frysinger
- [U-Boot] [PATCH 3/3] Makefile: cosmetic: optimize usage of LIBS-y
Mike Frysinger
- [U-Boot] [PATCH] doc/git-mailrc: update at91 and avr32
Mike Frysinger
- [U-Boot] [PATCH v3 1/4] Add support new arch: c6x
Mike Frysinger
- [U-Boot] [PATCH v3 2/4] c6x: Add support c674x CPUs
Mike Frysinger
- [U-Boot] [PATCH v3 3/4] c6x: Add suport build davinci SOC with c674x CPUs
Mike Frysinger
- [U-Boot] [PATCH v3 4/4] c6x: Add support c6745-som board
Mike Frysinger
- [U-Boot] [PATCH v4 1/1] zfs: Add ZFS filesystem support
Mike Frysinger
- [U-Boot] [PATCH] Blackfin: bfin_mac: drop volatile markings on packet buffers
Mike Frysinger
- [U-Boot] Pull request u-boot-blackfin.git (master branch)
Mike Frysinger
- [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available
Mike Frysinger
- [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available
Mike Frysinger
- [U-Boot] [PATCH] nds32: split common cache access from cpu into lib
Mike Frysinger
- [U-Boot] [PATCH v4 1/1] zfs: Add ZFS filesystem support
Jorgen Lundman
- [U-Boot] [PATCH] nds32: split common cache access from cpu into lib
Macpaul Lin
- [U-Boot] [PATCH 1/7 V5] EXYNOS: CLK: Add i2c clock
Rajeshwari Birje
- [U-Boot] [PATCH 7/7 V5] CONFIG: SMDK5250: I2C: Enable I2C
Rajeshwari Birje
- [U-Boot] [PATCH 5/7 V5] I2C: Modify the I2C driver for EXYNOS5
Rajeshwari Birje
- [U-Boot] [PATCH v4 2/2] arm: work around assembler bug
Albert ARIBAUD
- [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available
Albert ARIBAUD
- [U-Boot] Please pull u-boot-ti/master for v2012.07
Albert ARIBAUD
- [U-Boot] [PATCH u-boot-arm/next v2 1/1] OMAP3: igep00x0: add SPL support for IGEP-based boards
Enric Balletbò i Serra
- [U-Boot] [PATCH] ARM: EXYNOS: fixed compiler warning message
Minkyu Kang
- [U-Boot] [PATCH u-boot-arm/next v2 1/1] OMAP3: igep00x0: add SPL support for IGEP-based boards
Javier Martinez Canillas
- [U-Boot] Please pull u-boot-imx for v2012.07
Stefano Babic
- [U-Boot] [PATCH 1/7 V5] EXYNOS: CLK: Add i2c clock
Rajeshwari Birje
- [U-Boot] [PATCH v3 08/18] tegra: Add SOC support for display/lcd
Thierry Reding
- [U-Boot] [PATCH v3 09/18] tegra: Add LCD driver
Thierry Reding
- [U-Boot] [PATCH u-boot-arm/next v2 1/1] OMAP3: igep00x0: add SPL support for IGEP-based boards
Enric Balletbò i Serra
- [U-Boot] [PATCH v3 0/18] tegra: Add display driver and LCD support for Seaboard
Thierry Reding
- [U-Boot] [PATCH v3 08/18] tegra: Add SOC support for display/lcd
Adam Jiang
- [U-Boot] [PATCH u-boot-arm/next v2 1/1] OMAP3: igep00x0: add SPL support for IGEP-based boards
Javier Martinez Canillas
- [U-Boot] [PATCH v3 08/18] tegra: Add SOC support for display/lcd
Adam Jiang
- [U-Boot] [PATCH v3 08/18] tegra: Add SOC support for display/lcd
Thierry Reding
- [U-Boot] [PATCH u-boot-arm/next v2 2/2] OMAP3: igep00x0: add SPL support for IGEP-based boards
Javier Martinez Canillas
- [U-Boot] [PATCH] nds32: split common cache access from cpu into lib
Marek Vasut
- [U-Boot] [PATCH] net: link_local: fix build
Benoît Thébaudeau
- [U-Boot] [PATCH v2 0/4] Board support and feature for LaCie devices
Simon Guinot
- [U-Boot] [PATCH] net: bootp: fix build
Benoît Thébaudeau
- [U-Boot] [PATCH v7 01/15] tegra20: rename tegra2 -> tegra20
Simon Glass
- [U-Boot] [PATCH v7 09/15] ARM: add tegra20 support to arm720t
Simon Glass
- [U-Boot] [PATCH] ARM1136: Fix cache range checks
Benoît Thébaudeau
- [U-Boot] [PATCH 0/8 V6] EXYNOS5: Enable I2C support
Rajeshwari Shinde
- [U-Boot] [PATCH 1/8 V6] EXYNOS: CLK: Add i2c clock
Rajeshwari Shinde
- [U-Boot] [PATCH 2/8 V6] EXYNOS: Add I2C base address.
Rajeshwari Shinde
- [U-Boot] [PATCH 3/8 V6] EXYNOS5: define EXYNOS5_I2C_SPACING
Rajeshwari Shinde
- [U-Boot] [PATCH 4/8 V6] EXYNOS: PINMUX: Add pinmux support for I2C
Rajeshwari Shinde
- [U-Boot] [PATCH 5/8 V6] I2C: Move struct s3c24x0_i2c to a common place.
Rajeshwari Shinde
- [U-Boot] [PATCH 6/8 V6] I2C: Modify the I2C driver for EXYNOS5
Rajeshwari Shinde
- [U-Boot] [PATCH 7/8 V6] I2C: Add support for Multi channel
Rajeshwari Shinde
- [U-Boot] [PATCH 8/8 V6] CONFIG: SMDK5250: I2C: Enable I2C
Rajeshwari Shinde
- [U-Boot] i.MX dcache issues
Benoît Thébaudeau
- [U-Boot] i.MX dcache issues
Marek Vasut
- [U-Boot] [PATCH] ARM1136: Fix cache range checks
Stefano Babic
- [U-Boot] [PATCH 0/17] tegra: Add display driver and LCD support for Seaboard
Christian Kroehnert
- [U-Boot] [PATCH 1/2] net: fec_mxc: Fix setting of RCR for xMII
Benoît Thébaudeau
- [U-Boot] [PATCH 2/2] net: fec_mxc: Fix MDC for xMII
Benoît Thébaudeau
- [U-Boot] I apply to maintain S3C6400 board for u-boot
Zhong Hongbo
- [U-Boot] I apply to maintain S3C6400 board for u-boot
Zhong Hongbo
- [U-Boot] i.MX dcache issues
Stefano Babic
- [U-Boot] i.MX dcache issues
Marek Vasut
- [U-Boot] [PATCH] video: cfb_console: flush dcache for frame buffer in DRAM
Mike Frysinger
- [U-Boot] [PATCH] Added watchdog support for davinchi_dm365evm
Mike Frysinger
- [U-Boot] [PATCH] nds32: split common cache access from cpu into lib
Mike Frysinger
- [U-Boot] [PATCH v3 02/18] fdt: Add header guard to fdtdec.h
Mike Frysinger
- [U-Boot] [PATCH v3 03/18] tegra: Use const for pinmux_config_pingroup/table()
Mike Frysinger
- [U-Boot] [PATCH v3 04/18] tegra: Add display support to funcmux
Mike Frysinger
- [U-Boot] [PATCH v3 07/18] tegra: Add support for PWM
Mike Frysinger
- [U-Boot] [PATCH v3 12/18] lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment
Mike Frysinger
- [U-Boot] [PATCH v3 13/18] lcd: Add support for flushing LCD fb from dcache after update
Mike Frysinger
- [U-Boot] [PATCH v3 14/18] tegra: Align LCD frame buffer to section boundary
Mike Frysinger
- [U-Boot] [PATCH] nds32: split common cache access from cpu into lib
Marek Vasut
- [U-Boot] [PATCH v3 17/18] lcd: Add CONSOLE_SCROLL_LINES option to speed console
Mike Frysinger
- [U-Boot] [PATCH v3 11/18] arm: Add control over cachability of memory regions
Mike Frysinger
- [U-Boot] [PATCH v3 08/18] tegra: Add SOC support for display/lcd
Mike Frysinger
- [U-Boot] [PATCH v4 1/1] zfs: Add ZFS filesystem support
Mike Frysinger
- [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available
Mike Frysinger
- [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version
Tom Rini
- [U-Boot] [PATCH v4 2/2] arm: work around assembler bug
Tom Rini
- [U-Boot] [PATCH v2] kirkwood: add support for Iomega iConnect board
Luka Perkov
- [U-Boot] cross compile suceeds but not usable
kqt4at5v at gmail.com
- [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version
Mike Frysinger
- [U-Boot] [PATCH u-boot-arm/next v2 2/2] OMAP3: igep00x0: add SPL support for IGEP-based boards
Enric Balletbò i Serra
- [U-Boot] [PATCH v7 00/15] split tegra20 arm7 code into separate SPL
Tom Warren
- [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version
Tom Rini
- [U-Boot] [PATCH] video: cfb_console: flush dcache for frame buffer in DRAM
Marek Vasut
- [U-Boot] [PATCH u-boot-arm/next v2 2/2] OMAP3: igep00x0: add SPL support for IGEP-based boards
Javier Martinez Canillas
- [U-Boot] [PATCH 3/3] Makefile: cosmetic: optimize usage of LIBS-y
Daniel Schwierzeck
- [U-Boot] [PATCH u-boot-arm/next v3 2/2] OMAP3: igep00x0: add SPL support for IGEP-based boards
Javier Martinez Canillas
- [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version
Mike Frysinger
- [U-Boot] [PATCH] video: cfb_console: flush dcache for frame buffer in DRAM
Mike Frysinger
- [U-Boot] [PATCH v3 13/18] lcd: Add support for flushing LCD fb from dcache after update
Mike Frysinger
- [U-Boot] Pull request: u-boot-net.git next
Joe Hershberger
- [U-Boot] [PATCH v4 1/2] tools, config.mk: add binutils-version
Tom Rini
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] [PATCH] i.MX28: bug fixes in PMU configuration code
Marek Vasut
- [U-Boot] [PATCH 3/3] ARM: mx28: Remove CONFIG_ARCH_CPU_INIT
Marek Vasut
- [U-Boot] (no subject)
Gigin Jose
- [U-Boot] [PATCH] net: link_local: fix build
Joe Hershberger
- [U-Boot] [PATCH] net: bootp: fix build
Joe Hershberger
- [U-Boot] [PATCH 2/2] net: fec_mxc: Fix MDC for xMII
Joe Hershberger
- [U-Boot] [PATCH V3 01/25] mxc_i2c: fix i2c_imx_stop
Troy Kisky
- [U-Boot] [PATCH V3 02/25] mxc_i2c: remove ifdef of CONFIG_HARD_I2C
Troy Kisky
- [U-Boot] [PATCH V3 03/25] mxc_i2c: create tx_byte function
Troy Kisky
- [U-Boot] [PATCH V3 04/25] mxc_i2c: clear i2sr before waiting for bit
Troy Kisky
- [U-Boot] [PATCH V3 05/25] mxc_i2c: create i2c_init_transfer
Troy Kisky
- [U-Boot] [PATCH V3 06/25] mxc_i2c: call i2c_imx_stop on error in i2c_read/i2c_write
Troy Kisky
- [U-Boot] [PATCH V3 07/25] mxc_i2c.c: code i2c_probe as a 0 length i2c_write
Troy Kisky
- [U-Boot] [PATCH V3 08/25] mxc_i2c: combine i2c_imx_bus_busy and i2c_imx_trx_complete into wait_for_sr_state
Troy Kisky
- [U-Boot] [PATCH V3 09/25] mxc_i2c: remove redundant read
Troy Kisky
- [U-Boot] [PATCH V3 10/25] mxc_i2c: place imx_start code inline
Troy Kisky
- [U-Boot] [PATCH V3 11/25] mxc_i2c: place i2c_reset code inline
Troy Kisky
- [U-Boot] [PATCH V3 12/25] mxc_i2c: don't disable controller after every transaction
Troy Kisky
- [U-Boot] [PATCH V3 13/25] mxc_i2c: change slave addr if conflicts with destination.
Troy Kisky
- [U-Boot] [PATCH V3 14/25] mxc_i2c: check for arbitration lost
Troy Kisky
- [U-Boot] [PATCH V3 15/25] mxc_i2c: add retries
Troy Kisky
- [U-Boot] [PATCH V3 16/25] mxc_i2c: add i2c_regs argument to i2c_imx_stop
Troy Kisky
- [U-Boot] [PATCH V3 17/25] mxc_i2c: prep work for multiple busses support
Troy Kisky
- [U-Boot] [PATCH V3 18/25] mxc_i2c: add bus recovery support
Troy Kisky
- [U-Boot] [PATCH V3 19/25] mxc_i2c: finish adding CONFIG_I2C_MULTI_BUS support
Troy Kisky
- [U-Boot] [PATCH V3 20/25] iomux-v3: remove include of mx6x_pins.h
Troy Kisky
- [U-Boot] [PATCH 1/8 V6] EXYNOS: CLK: Add i2c clock
Simon Glass
- [U-Boot] [PATCH V3 21/25] i.mx: iomux-v3.h: move to imx-common include directory
Troy Kisky
- [U-Boot] [PATCH V3 22/25] i.mx: iomux-v3.c: move to imx-common directory
Troy Kisky
- [U-Boot] [PATCH V3 23/25] i.mx53: add definition for I2C3_BASE_ADDR
Troy Kisky
- [U-Boot] [PATCH V3 24/25] imx-common: add i2c.c for bus recovery support
Troy Kisky
- [U-Boot] [PATCH V3 25/25] mx6qsabrelite: add i2c multi-bus support
Troy Kisky
- [U-Boot] [PATCH 3/8 V6] EXYNOS5: define EXYNOS5_I2C_SPACING
Simon Glass
- [U-Boot] [PATCH 6/8 V6] I2C: Modify the I2C driver for EXYNOS5
Simon Glass
- [U-Boot] [PATCH 8/8 V6] CONFIG: SMDK5250: I2C: Enable I2C
Simon Glass
- [U-Boot] [PATCH v7 00/15] split tegra20 arm7 code into separate SPL
Simon Glass
- [U-Boot] [PATCH v5 00/13] split tegra20 arm7 code into separate SPL
Simon Glass
- [U-Boot] [PATCH 1/5] ehci: cosmetic: Define the number of qt_buffers
Benoît Thébaudeau
- [U-Boot] [PATCH 2/5] ehci-hcd: Boost transfer speed
Benoît Thébaudeau
- [U-Boot] [PATCH 3/5] usb_storage: Remove EHCI constraints
Benoît Thébaudeau
- [U-Boot] [PATCH 4/5] usb_storage: Restore non-EHCI support
Benoît Thébaudeau
- [U-Boot] [PATCH 5/5] usb_storage: Adjust time-outs
Benoît Thébaudeau
- [U-Boot] CONFIG_OF_EMBED/CONFIG_OF_SEPARATE and fdtcontroladdr
Simon Glass
- [U-Boot] [PATCH 1/7 V5] EXYNOS: CLK: Add i2c clock
Simon Glass
- [U-Boot] [PATCH 1/5] ehci: cosmetic: Define the number of qt_buffers
Marek Vasut
- [U-Boot] [PATCH v2] arm: cm4008, cm41xx: Fix ROM relocation
Yann Vernier
- [U-Boot] [PATCH 1/7] FAT: get_fatent: Fix FAT boundary check
Benoît Thébaudeau
- [U-Boot] [PATCH 2/7] FAT: cosmetic: Remove useless assignment
Benoît Thébaudeau
- [U-Boot] [PATCH 3/7] FAT: Fix redundant sector read
Benoît Thébaudeau
- [U-Boot] [PATCH 4/7] FAT: Fix file contents listed as directory
Benoît Thébaudeau
- [U-Boot] [PATCH 5/7] FAT: get_cluster: Add buffer bouncing
Benoît Thébaudeau
- [U-Boot] [PATCH 6/7] FAT: Simplify get_contents
Benoît Thébaudeau
- [U-Boot] [PATCH 7/7] FAT: Make it possible to read from any file position
Benoît Thébaudeau
- [U-Boot] [V2 04/15] S3C64XX: add pwm for s3c64xx support
Zhong Hongbo
- [U-Boot] [PATCH] arm: rmobile: Support build with gcc-4.6 or later
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 7/7] FAT: Make it possible to read from any file position
Mike Frysinger
- [U-Boot] [PATCH 5/7] FAT: get_cluster: Add buffer bouncing
Mike Frysinger
- [U-Boot] [PATCH] rmobile: kzm9g: Fix warnin in cmp_loop function
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 7/7] FAT: Make it possible to read from any file position
Benoît Thébaudeau
- [U-Boot] [PATCH 5/7] FAT: get_cluster: Add buffer bouncing
Benoît Thébaudeau
- [U-Boot] [PATCH v2 3/3] Makefile: cosmetic: optimize usage of LIBS-y
daniel.schwierzeck at gmail.com
- [U-Boot] [PATCH v4 1/7] arm: rmobile: kzm9g: Modify sdram area
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v4 3/7] arm: rmobile: kzm9g: change prompt to board specific
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v4 7/7] arm: rmobile: kzm9g: enable reset command
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2] arm: rmobile: Support build with gcc-4.6 or later
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v4 6/7] arm: rmobile: kzm9g: Modify bus controller setting for CS4
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v4 5/7] MAINTAINERS: Add Tetsuyuki Kobayshi for kzm9g
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2] arm: rmobile: Add support Renesas SH73A0
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v4 4/7] arm: rmobile: kzm9g: Add dummy member to struct sh73a0_rwdt
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v3] arm: rmobile: Add support Renesas SH73A0
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] arm: rmobile: Add support PFC of Renesas SH73A0
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] arm: rmobile: kzm9g: Fix CONFIG_BAUDRATE setting
Tetsuyuki Kobayshi
- [U-Boot] [PATCH V2] i.MX: fsl_esdhc: allow use with cache enabled.
Marek Vasut
- [U-Boot] [PATCH 7/7] FAT: Make it possible to read from any file position
Mike Frysinger
- [U-Boot] [V2 04/15] S3C64XX: add pwm for s3c64xx support
Minkyu Kang
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Mike Frysinger
- [U-Boot] [PATCH 1/2] common.h: Introduce DEFINE_CACHE_ALIGN_BUFFER
Mike Frysinger
- [U-Boot] [PATCH 1/7] dfu:usb: Support for g_dnl composite download gadget.
Mike Frysinger
- [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command
Mike Frysinger
- [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command
Mike Frysinger
- [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command
Mike Frysinger
- [U-Boot] [PATCH 4/7] dfu: MMC specific routines for DFU operation
Mike Frysinger
- [U-Boot] [PATCH 3/7] dfu: DFU backend implementation
Mike Frysinger
- [U-Boot] [PATCH 2/7] sf: winbond: Add support for the Winbond W25Q80BL
Mike Frysinger
- [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Mike Frysinger
- [U-Boot] [PATCH v2] video: support exynos fimd driver for various exynos series
Minkyu Kang
- [U-Boot] [PATCH 0/3] mmc: sdhci: fixed some problems for Exynos
Jaehoon Chung
- [U-Boot] [PATCH 1/3] mmc: s5p_sdhci: set the SDHCI_QUIRK_BROKEN_R1B
Jaehoon Chung
- [U-Boot] [PATCH 2/3] mmc: s5p_mmc: fixed wrong function argument
Jaehoon Chung
- [U-Boot] [PATCH 3/3] mmc: s5p_sdhci: add the set_mmc_clk for cmu control
Jaehoon Chung
- [U-Boot] [PATCH V2] i.MX: fsl_esdhc: allow use with cache enabled.
Dirk Behme
- [U-Boot] [PATCH v2] kirkwood: add support for Iomega iConnect board
Prafulla Wadaskar
- [U-Boot] [PATCH v2 1/2] kirkwood: implement kw_sdram_bs_set()
Prafulla Wadaskar
- [U-Boot] [PATCH v2 2/2] km_arm: enable SDRAM window size fixup
Prafulla Wadaskar
- [U-Boot] [PATCH v5 0/1] zfs: Add ZFS filesystem support
Jorgen Lundman
- [U-Boot] [PATCH v5 1/1] zfs: Add ZFS filesystem support
Jorgen Lundman
- [U-Boot] Pull request u-boot-blackfin.git (master branch)
Wolfgang Denk
- [U-Boot] Wrong identify on u-boot-arm/next
Albert ARIBAUD
- [U-Boot] [PATCH] tools: clean up mingw ifdefs
Wolfgang Denk
- [U-Boot] Pull request: u-boot-net.git master
Wolfgang Denk
- [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Wolfgang Denk
- [U-Boot] I apply to maintain S3C6400 board for u-boot
Wolfgang Denk
- [U-Boot] Pull request: u-boot-net.git next
Wolfgang Denk
- [U-Boot] [PATCH] arm: armv7: add compile option -mno-unaligned-access if available
Albert ARIBAUD
- [U-Boot] [PULL] u-boot-usb/master
Wolfgang Denk
- [U-Boot] [PATCH] nds32: split common cache access from cpu into lib
Macpaul Lin
- [U-Boot] [PATCH v2] video: support exynos fimd driver for various exynos series
Anatolij Gustschin
- [U-Boot] [PATCH V2] i.MX: fsl_esdhc: allow use with cache enabled.
Stefano Babic
- [U-Boot] [PATCH v2] kirkwood: add support for Iomega iConnect board
Luka Perkov
- [U-Boot] [PATCH] MPC85XX: compile stub cache function
Stefano Babic
- [U-Boot] [PATCH 1/2] powerpc: Stack Pointer must be 16 aligned
Joakim Tjernlund
- [U-Boot] [PATCH 2/2] mpc85xx: Initial SP alignment is wrong.
Joakim Tjernlund
- [U-Boot] [PATCH v5] arm: rmobile: kzm9g: Add dummy member to struct sh73a0_rwdt
Tetsuyuki Kobayshi
- [U-Boot] [PATCH] i.MX28: bug fixes in PMU configuration code
Stefano Babic
- [U-Boot] [PATCH v2] kirkwood: add support for Iomega iConnect board
Wojciech Dubowik
- [U-Boot] [PATCH v2] kirkwood: add support for Iomega iConnect board
Prafulla Wadaskar
- [U-Boot] [PATCH v2] video: support exynos fimd driver for various exynos series
Minkyu Kang
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Benoît Thébaudeau
- [U-Boot] [PATCH 1/2] common.h: Introduce DEFINE_CACHE_ALIGN_BUFFER
Marek Vasut
- [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command
Marek Vasut
- [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command
Marek Vasut
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Stefan Herbrechtsmeier
- [U-Boot] [PATCH v2 1/2] kirkwood: implement kw_sdram_bs_set()
Marek Vasut
- [U-Boot] [PATCH] i.MX28: bug fixes in PMU configuration code
Marek Vasut
- [U-Boot] I apply to maintain S3C6400 board for u-boot
Zhong Hongbo
- [U-Boot] [PATCH] SMDK6400: Add MAINTAINERS entry
Zhong Hongbo
- [U-Boot] [PATCH] SMDK6400: Add MAINTAINERS entry
Zhong Hongbo
- [U-Boot] Pull request: ub-oot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH v2 1/2] kirkwood: implement kw_sdram_bs_set()
Holger Brunck
- [U-Boot] [PATCH v3 1/4] kirkwood: use c-struct for access to SDRAM addr decode registers
Holger Brunck
- [U-Boot] [PATCH v3 2/4] kirkwood: implement kw_sdram_bs_set()
Holger Brunck
- [U-Boot] [PATCH v3 3/4] kirkwood: implement kw_sdram_size_adjust
Holger Brunck
- [U-Boot] [PATCH v3 4/4] arm/km: use kw_sdram_size_adjust to adjust SDRAM size
Holger Brunck
- [U-Boot] Unable to power the USB Keyboard on u-boot
Atul Kumar
- [U-Boot] Need help to get u-boot running on the taskit stamp9g20
Markus Hubig
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Benoît Thébaudeau
- [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces
Benoît Thébaudeau
- [U-Boot] [PATCH v2 2/8] FAT: get_fatent: Fix FAT boundary check
Benoît Thébaudeau
- [U-Boot] [PATCH v2 3/8] FAT: cosmetic: Remove useless assignment
Benoît Thébaudeau
- [U-Boot] [PATCH v2 4/8] FAT: Fix redundant sector read
Benoît Thébaudeau
- [U-Boot] [PATCH v2 5/8] FAT: Fix file contents listed as directory
Benoît Thébaudeau
- [U-Boot] [PATCH v2 6/8] FAT: get_cluster: Add buffer bouncing
Benoît Thébaudeau
- [U-Boot] [PATCH v2 7/8] FAT: Simplify get_contents
Benoît Thébaudeau
- [U-Boot] [PATCH v2 8/8] FAT: Make it possible to read from any file position
Benoît Thébaudeau
- [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces
Benoît Thébaudeau
- [U-Boot] [PATCH] md5: Export step-by-step API
Benoît Thébaudeau
- [U-Boot] Unable to power the USB Keyboard on u-boot
Marek Vasut
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Marek Vasut
- [U-Boot] [PATCH v3 1/4] kirkwood: use c-struct for access to SDRAM addr decode registers
Prafulla Wadaskar
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Benoît Thébaudeau
- [U-Boot] [PATCH] rtc: pcf8563: Make century compatible with Linux
Benoît Thébaudeau
- [U-Boot] [PATCH] rtc: imxdi: Initial support
Benoît Thébaudeau
- [U-Boot] Need help to get u-boot running on the taskit stamp9g20
Markus Hubig
- [U-Boot] [PATCH] nds32: split common cache access from cpu into lib
Mike Frysinger
- [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command
Mike Frysinger
- [U-Boot] [PATCH] md5: Export step-by-step API
Mike Frysinger
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Stefan Herbrechtsmeier
- [U-Boot] [PATCH v3] global_data: unify global flag defines
Mike Frysinger
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Benoît Thébaudeau
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Stefan Herbrechtsmeier
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Benoît Thébaudeau
- [U-Boot] [PATCH v2] nds32: split common cache access from cpu into lib
Macpaul Lin
- [U-Boot] Pull request: u-boot-nds32
Macpaul Lin
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Kim Phillips
- [U-Boot] [PULL] u-boot-usb/master
McClintock Matthew-B29882
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
McClintock Matthew-B29882
- [U-Boot] [PATCH v3 2/4] kirkwood: implement kw_sdram_bs_set()
Prafulla Wadaskar
- [U-Boot] [PATCH v3 3/4] kirkwood: implement kw_sdram_size_adjust
Prafulla Wadaskar
- [U-Boot] [PATCH v3 4/4] arm/km: use kw_sdram_size_adjust to adjust SDRAM size
Prafulla Wadaskar
- [U-Boot] [PATCH 1/2] kirkwood: ib62x0: Invert SATA activity LEDs
Simon Baatz
- [U-Boot] [PATCH 2/2] kirkwood: ib62x0: Support flattened devicetree
Simon Baatz
- [U-Boot] [PATCH] common.h: Remove include compiler.h
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Ilya Yanok
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PATCH] common.h: Remove include compiler.h
Wolfgang Denk
- [U-Boot] Pull request: u-boot-nds32
Wolfgang Denk
- [U-Boot] Pull request: ub-oot-arm/master
Wolfgang Denk
- [U-Boot] [PATCH 1/2] powerpc/mpc85xx: Ignore E bit for BSC9130/1
York Sun
- [U-Boot] [PATCH 2/2] powerpc/mpc85xx: Enable workaround for erratum CPU_A011 for P3041
York Sun
- [U-Boot] Please pull u-boot-imx for v2012.07
Albert ARIBAUD
- [U-Boot] Pull request #2: u-boot-arm/master
Albert ARIBAUD
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Marek Vasut
- [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command
Marek Vasut
- [U-Boot] [PATCH 2/2] mpc85xx: Initial SP alignment is wrong.
Scott Wood
- [U-Boot] [PATCH 1/2] powerpc: Stack Pointer must be 16 aligned
Scott Wood
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Graeme Russ
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Scott Wood
- [U-Boot] [PATCH 1/2] common.h: Introduce DEFINE_CACHE_ALIGN_BUFFER
Mike Frysinger
- [U-Boot] [PATCH 1/2] common.h: Introduce DEFINE_CACHE_ALIGN_BUFFER
Tom Rini
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Graeme Russ
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Tom Rini
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Marek Vasut
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Graeme Russ
- [U-Boot] [PATCH 1/2] kirkwood: ib62x0: Invert SATA activity LEDs
Luka Perkov
- [U-Boot] [PATCH 2/2] kirkwood: ib62x0: Support flattened devicetree
Luka Perkov
- [U-Boot] u-boot.bin file format
J.Hwan Kim
- [U-Boot] [PATCH 2/2] kirkwood: ib62x0: Support flattened devicetree
DrEagle
- [U-Boot] [PATCH] disk/partition: Fix the depend for all the partitions file
Zhong Hongbo
- [U-Boot] [PATCH 2/2] kirkwood: ib62x0: Support flattened devicetree
Simon Baatz
- [U-Boot] [PATCH 2/2] kirkwood: ib62x0: Support flattened devicetree
Luka Perkov
- [U-Boot] [PATCH 1/2] net: fec_mxc: Fix setting of RCR for xMII
Benoît Thébaudeau
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Marek Vasut
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Marek Vasut
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Marek Vasut
- [U-Boot] u-boot.bin file format
Marek Vasut
- [U-Boot] [PATCH 01/10] dm: arm: Remove support for lpc2292
Marek Vasut
- [U-Boot] [PATCH 02/10] dm: arm: Remove support for s3c4510
Marek Vasut
- [U-Boot] [PATCH 03/10] dm: arm: Remove support for NETARM
Marek Vasut
- [U-Boot] [PATCH 04/10] dm: wdt: arm: Move tnetv107x into drivers/watchdog/
Marek Vasut
- [U-Boot] [PATCH 05/10] dm: Move s3c24xx USB driver to a proper place
Marek Vasut
- [U-Boot] [PATCH 06/10] dm: Move OMAP GPIO driver to drivers/gpio/
Marek Vasut
- [U-Boot] [PATCH 07/10] dm: wdt: Move s5p watchdog timer to drivers/watchdog/
Marek Vasut
- [U-Boot] [PATCH 08/10] dm: tegra: Staticize local functions in usb.c
Marek Vasut
- [U-Boot] [PATCH 09/10] dm: net: Move IXP NPE to drivers/net/
Marek Vasut
- [U-Boot] [PATCH 10/10] dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP
Marek Vasut
- [U-Boot] [PATCH 2/2] mpc85xx: Initial SP alignment is wrong.
Joakim Tjernlund
- [U-Boot] [PATCH 1/2] powerpc: Stack Pointer must be 16 aligned
Joakim Tjernlund
- [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command
Mike Frysinger
- [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command
Marek Vasut
- [U-Boot] [PATCH 1/2] common.h: Introduce DEFINE_CACHE_ALIGN_BUFFER
Mike Frysinger
- [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces
Mike Frysinger
- [U-Boot] [PATCH v2] cmd_sf: add size checking to spi flash commands
Mike Frysinger
- [U-Boot] [PATCH V3 1/2] mtd/spi/spi_flash: support CMD_READ_ID=0x90 case
Mike Frysinger
- [U-Boot] [STATUS] v2012.07-rc1 is out - release date July 23
Michael Walle
- [U-Boot] [PATCH 10/10] dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP
Marek Vasut
- [U-Boot] [PATCH 10/10] dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP
Otavio Salvador
- [U-Boot] [PATCH V3 2/2] mtd/spi: add sst25l driver
Mike Frysinger
- [U-Boot] [PATCH] tools/env: check flash length before probing
Mike Frysinger
- [U-Boot] [PATCH 10/10] dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP
Marek Vasut
- [U-Boot] [PATCH 10/10] dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP
Otavio Salvador
- [U-Boot] Invalid Netconsole source MAC address [was: Re: [STATUS] v2012.07-rc1 is out - release date July 23]
Michael Walle
- [U-Boot] Pull request #2: u-boot-arm/master -- PLEASE IGNORE
Albert ARIBAUD
- [U-Boot] Pull request #3 : u-boot-arm/master
Albert ARIBAUD
- [U-Boot] [PATCH] MPC85XX: compile stub cache function
Wolfgang Denk
- [U-Boot] Need help to get u-boot running on the taskit stamp9g20
Wolfgang Denk
- [U-Boot] Pull request #3 : u-boot-arm/master
Wolfgang Denk
- [U-Boot] Sparc build warnings
Marek Vasut
- [U-Boot] [PATCH v3] kirkwood: add support for Iomega iConnect board
Luka Perkov
- [U-Boot] [PATCH 1/2] BC3450 board: change debug code to using debug()
Wolfgang Denk
- [U-Boot] [PATCH 2/2] BC3450 board: Remove unused CONFIG_SYS_CPU definition
Wolfgang Denk
- [U-Boot] [PATCH 1/2] BC3450 board: change debug code to using debug()
Wolfgang Denk
- [U-Boot] [PATCH 2/2] BC3450 board: Remove unused CONFIG_SYS_CPU definition
Wolfgang Denk
- [U-Boot] [STATUS] v2012.07-rc2 is out - release date July 30
Wolfgang Denk
- [U-Boot] Sparc build warnings
Peter Tyser
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Graeme Russ
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Marek Vasut
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Graeme Russ
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Marek Vasut
- [U-Boot] [PATCH 6/8 V6] I2C: Modify the I2C driver for EXYNOS5
Joonyoung Shim
- [U-Boot] [PATCH 8/8 V6] CONFIG: SMDK5250: I2C: Enable I2C
Joonyoung Shim
- [U-Boot] [PATCH 1/4] net: sh_eth: clean up for the SH7757's code
Shimoda, Yoshihiro
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Wolfgang Denk
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Wolfgang Denk
- [U-Boot] [PATCH V3 20/25] iomux-v3: remove include of mx6x_pins.h
Liu Hui-R64343
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Wolfgang Denk
- [U-Boot] [PATCH 1/4] net: sh_eth: clean up for the SH7757's code
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v5] arm: rmobile: kzm9g: Add dummy member to struct sh73a0_rwdt
Nobuhiro Iwamatsu
- [U-Boot] [PATCH V3 25/25] mx6qsabrelite: add i2c multi-bus support
Liu Hui-R64343
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Andy Pont
- [U-Boot] [PATCH 0/7] dfu:usb: Composite USB download gadget with DFU function
Lukasz Majewski
- [U-Boot] [PATCH 2/2] mpc85xx: Initial SP alignment is wrong.
Joakim Tjernlund
- [U-Boot] [PATCH] integrator: break out common config
Linus Walleij
- [U-Boot] [PATCH 0/7] dfu:usb: Composite USB download gadget with DFU function
Marek Vasut
- [U-Boot] Uboot and initramfs
Frank Agius
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Stefan Herbrechtsmeier
- [U-Boot] Sparc build warnings
Mike Frysinger
- [U-Boot] [PATCH 1/2] common.h: Introduce DEFINE_CACHE_ALIGN_BUFFER
Tom Rini
- [U-Boot] [PATCH 1/7] dfu:usb: Support for g_dnl composite download gadget.
Lukasz Majewski
- [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command
Lukasz Majewski
- [U-Boot] [PATCH 3/7] dfu: DFU backend implementation
Lukasz Majewski
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Tom Rini
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Tom Rini
- [U-Boot] [PATCH 2/2] mpc85xx: Initial SP alignment is wrong.
Scott Wood
- [U-Boot] [PATCH 2/2] mpc85xx: Initial SP alignment is wrong.
Joakim Tjernlund
- [U-Boot] Sparc build warnings
Marek Vasut
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Benoît Thébaudeau
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Marek Vasut
- [U-Boot] [PATCH 2/2] mpc85xx: Initial SP alignment is wrong.
Scott Wood
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Tom Rini
- [U-Boot] [PATCH 1/2] net: fec_mxc: Fix setting of RCR for xMII
Benoît Thébaudeau
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Marek Vasut
- [U-Boot] [PATCH V3 1/2] Add env vars describing U-Boot target board
Stephen Warren
- [U-Boot] [PATCH v2] ext2fs: fix warning: 'blocknxt' may be used uninitialized
Tom Rini
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Tom Rini
- [U-Boot] Invalid Netconsole source MAC address [was: Re: [STATUS] v2012.07-rc1 is out - release date July 23]
Joe Hershberger
- [U-Boot] [PATCH V3 1/2] Add env vars describing U-Boot target board
Wolfgang Denk
- [U-Boot] [PATCH v2 11/19] tegra: Add LCD support to Nvidia boards
Stephen Warren
- [U-Boot] [PATCH 06/10] dm: Move OMAP GPIO driver to drivers/gpio/
Tom Rini
- [U-Boot] [PATCH 10/10] dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP
Tom Rini
- [U-Boot] [PATCH v7 00/15] split tegra20 arm7 code into separate SPL
Tom Warren
- [U-Boot] Invalid Netconsole source MAC address [was: Re: [STATUS] v2012.07-rc1 is out - release date July 23]
Michael Walle
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Tom Rini
- [U-Boot] [PATCHv2 1/2] mpc85xx: Initial SP alignment is wrong.
Joakim Tjernlund
- [U-Boot] [PATCHv2 2/2] powerpc: Stack Pointer not properly aligned
Joakim Tjernlund
- [U-Boot] [PATCH 2/2] mpc85xx: Initial SP alignment is wrong.
Joakim Tjernlund
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Tom Rini
- [U-Boot] [PATCH 10/10] dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP
Marek Vasut
- [U-Boot] Invalid Netconsole source MAC address [was: Re: [STATUS] v2012.07-rc1 is out - release date July 23]
Joe Hershberger
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Marek Vasut
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Marek Vasut
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Marek Vasut
- [U-Boot] Antwort: Re: NetConsole & TFTP
Joe Hershberger
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Marek Vasut
- [U-Boot] [PATCH] net: Make sure the ethaddr is updated in net_init()
Joe Hershberger
- [U-Boot] [PATCH] net: Make sure the ethaddr is updated in net_init()
Joe Hershberger
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Eric Nelson
- [U-Boot] RFC - PatchTrack Specification
Graeme Russ
- [U-Boot] [PATCH 1/4] net: sh_eth: clean up for the SH7757's code
Shimoda, Yoshihiro
- [U-Boot] [PATCH] sh: modify checkcpu() for SH-4A
Shimoda, Yoshihiro
- [U-Boot] [PATCH] arm: rmobile: kzm9g: Fix CONFIG_BAUDRATE setting
Nobuhiro Iwamatsu
- [U-Boot] [PATCH] sh: modify checkcpu() for SH-4A
Nobuhiro Iwamatsu
- [U-Boot] [V2 14/15] S3C64XX: Move s3c6400.h to cpu.h to support s3c6410 board
Minkyu Kang
- [U-Boot] RFC - PatchTrack Specification
Marek Vasut
- [U-Boot] [PATCH v2] ext2fs: fix warning: 'blocknxt' may be used uninitialized
Thierry Reding
- [U-Boot] [PATCH 08/10] dm: tegra: Staticize local functions in usb.c
Simon Glass
- [U-Boot] [PATCH 08/10] dm: tegra: Staticize local functions in usb.c
Simon Glass
- [U-Boot] [PATCH 08/10] dm: tegra: Staticize local functions in usb.c
Marek Vasut
- [U-Boot] [PATCH 0/8 V7] EXYNOS5: Enable I2C support
Rajeshwari Shinde
- [U-Boot] [PATCH 1/8 V7] EXYNOS: CLK: Add i2c clock
Rajeshwari Shinde
- [U-Boot] [PATCH 2/8 V7] EXYNOS: Add I2C base address.
Rajeshwari Shinde
- [U-Boot] [PATCH 3/8 V7] EXYNOS5: define EXYNOS5_I2C_SPACING
Rajeshwari Shinde
- [U-Boot] [PATCH 4/8 V7] EXYNOS: PINMUX: Add pinmux support for I2C
Rajeshwari Shinde
- [U-Boot] [PATCH 5/8 V7] I2C: Move struct s3c24x0_i2c to a common place.
Rajeshwari Shinde
- [U-Boot] [PATCH 6/8 V7] I2C: Modify the I2C driver for EXYNOS5
Rajeshwari Shinde
- [U-Boot] [PATCH 7/8 V7] I2C: Add support for Multi channel
Rajeshwari Shinde
- [U-Boot] [PATCH 8/8 V7] CONFIG: SMDK5250: I2C: Enable I2C
Rajeshwari Shinde
- [U-Boot] [V2 13/15] S3C6400: clear memory init variable
Minkyu Kang
- [U-Boot] [V2 12/15] S3c64xx: clear GPIO, Interrupt, Watchdog variable.
Minkyu Kang
- [U-Boot] [V2 11/15] S3C64XX: Switch to use read/writel to operation clock system
Minkyu Kang
- [U-Boot] [PATCH] dts/Makefile: Turn off system-/gcc-specific predefined macros
Horst Kronstorfer
- [U-Boot] [PATCH 1/2] spi: microblaze: Adds driver for Xilinx SPI controller
Michal Simek
- [U-Boot] [PATCH] net: Make sure the ethaddr is updated in net_init()
Michael Walle
- [U-Boot] Unable to power the USB Keyboard on u-boot
atulronu
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Stefan Herbrechtsmeier
- [U-Boot] RFC - PatchTrack Specification (revised)
Graeme Russ
- [U-Boot] [V2 11/15] S3C64XX: Switch to use read/writel to operation clock system
Zhong Hongbo
- [U-Boot] [V2 14/15] S3C64XX: Move s3c6400.h to cpu.h to support s3c6410 board
Zhong Hongbo
- [U-Boot] building tools/env
Nickos
- [U-Boot] [PATCH] dts/Makefile: Turn off system-/gcc-specific predefined macros
Mike Frysinger
- [U-Boot] Need help to get u-boot running on the taskit stamp9g20
Markus Hubig
- [U-Boot] [PATCH 08/10] dm: tegra: Staticize local functions in usb.c
Tom Warren
- [U-Boot] [PATCH] usb: fallback safely when a configuration descriptor is too large
Vincent Palatin
- [U-Boot] building tools/env
Mike Frysinger
- [U-Boot] [PATCH 1/7] dfu:usb: Support for g_dnl composite download gadget.
Mike Frysinger
- [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command
Mike Frysinger
- [U-Boot] RFC - PatchTrack Specification
Wolfgang Denk
- [U-Boot] RFC - PatchTrack Specification (revised)
Wolfgang Denk
- [U-Boot] [PATCH 0/17] tegra: Add display driver and LCD support for Seaboard
Stephen Warren
- [U-Boot] Pull request: u-boot-net.git master
Joe Hershberger
- [U-Boot] Pull request: u-boot-net.git next
Joe Hershberger
- [U-Boot] [PATCH 1/4] net: sh_eth: clean up for the SH7757's code
Joe Hershberger
- [U-Boot] [PATCH 2/4] net: sh_eth: add SH_ETH_TYPE_ condition
Joe Hershberger
- [U-Boot] [PATCH 3/4] net: sh_eth: modify the definitions of regsiter
Joe Hershberger
- [U-Boot] [PATCH 4/4] net: sh_eth: add support for SH7757's GETHER
Joe Hershberger
- [U-Boot] [PATCH] dts/Makefile: Turn off system-/gcc-specific predefined macros
Horst Kronstorfer
- [U-Boot] [PATCH 08/10] dm: tegra: Staticize local functions in usb.c
Marek Vasut
- [U-Boot] Unable to power the USB Keyboard on u-boot
Marek Vasut
- [U-Boot] [PATCH] net: Make the netconsole buffer size configurable
Joe Hershberger
- [U-Boot] [PATCH] net: Make netconsole src and dest ports configurable
Joe Hershberger
- [U-Boot] [PATCH] net: Improve the speed of netconsole
Joe Hershberger
- [U-Boot] [PATCH 5/7] dfu:cmd: Support for DFU u-boot command
Lukasz Majewski
- [U-Boot] Unable to power the USB Keyboard on u-boot
Tom Rini
- [U-Boot] [PATCH 08/10] dm: tegra: Staticize local functions in usb.c
Tom Warren
- [U-Boot] [PATCH v3 0/8] CPSW switch plus SPL net support
Ilya Yanok
- [U-Boot] [PATCH v3 1/8] cpsw: add driver for cpsw ethernet device
Ilya Yanok
- [U-Boot] [PATCH v3 2/8] am33xx: CPSW init and definitions
Ilya Yanok
- [U-Boot] [PATCH v3 3/8] am33xx: pin mux defintions for CPSW switch
Ilya Yanok
- [U-Boot] [PATCH v3 4/8] am335x_evm: read the on-board EEPROM
Ilya Yanok
- [U-Boot] [PATCH v3 5/8] am335x_evm: CPSW support
Ilya Yanok
- [U-Boot] [PATCH v3 6/8] net/bootp: add VCI support for BOOTP also
Ilya Yanok
- [U-Boot] [PATCH v3 7/8] OMAP: networking support for SPL
Ilya Yanok
- [U-Boot] [PATCH v3 8/8] am335x_evm: enable networking in SPL
Ilya Yanok
- [U-Boot] RFC - PatchTrack Specification (revised)
Graeme Russ
- [U-Boot] [PATCH v3 6/8] net/bootp: add VCI support for BOOTP also
Joe Hershberger
- [U-Boot] powerdown can't work (mx28)
alex
- [U-Boot] [PATCH] usb: fallback safely when a configuration descriptor is too large
Simon Glass
- [U-Boot] [PATCH] net: Improve the speed of netconsole
Stefano Babic
- [U-Boot] RFC - PatchTrack Specification (revised)
Andy Pont
- [U-Boot] RFC - PatchTrack Specification (revised)
Wolfgang Denk
- [U-Boot] Query on S3C2412
Chander Kashyap
- [U-Boot] RFC - PatchTrack Specification (revised)
Graeme Russ
- [U-Boot] [PATCH 1/2] GPIO: pca953x: fix spelling in help
Laurence Withers
- [U-Boot] [PATCH 2/2] GPIO: pca953x: fix error reporting
Laurence Withers
- [U-Boot] [PATCH 11/13] i.MX28: Add battery boot components to SPL
Lauri Hintsala
- [U-Boot] [PATCH 11/13] i.MX28: Add battery boot components to SPL
Lauri Hintsala
- [U-Boot] [U-BOOT]: Add support for numonyx spi flash.
jagan
- [U-Boot] [PATCH] dts/Makefile: Turn off system-/gcc-specific predefined macros
Mike Frysinger
- [U-Boot] [PATCH] net: Make the netconsole buffer size configurable
Mike Frysinger
- [U-Boot] [PATCH] net: Make netconsole src and dest ports configurable
Mike Frysinger
- [U-Boot] [PATCH v4 3/4] kirkwood: implement kw_sdram_size_adjust
Gerlando Falauto
- [U-Boot] [PATCH v4 4/4] arm/km: use kw_sdram_size_adjust to adjust SDRAM size
Gerlando Falauto
- [U-Boot] Binary file header
Thiago De Quadros
- [U-Boot] [PATCH v3 6/8] net/bootp: add VCI support for BOOTP also
Ilya Yanok
- [U-Boot] [PATCH] net: Improve the speed of netconsole
Mike Frysinger
- [U-Boot] [PATCH 11/13] i.MX28: Add battery boot components to SPL
Marek Vasut
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Tom Rini
- [U-Boot] powerdown can't work (mx28)
Marek Vasut
- [U-Boot] [PATCH] powerpc/85xx: use CONFIG_SYS_FSL_PCIE_COMPAT macro when setting the PCI LIODNs
Timur Tabi
- [U-Boot] powerdown can't work (mx28)
alex
- [U-Boot] [PATCH 0/3] mmc: sdhci: fixed some problems for Exynos
Jaehoon Chung
- [U-Boot] [PATCH 0/4] arm: rmobile: kzm9g: update
Tetsuyuki Kobayshi
- [U-Boot] [PATCH 1/4] arm: rmobile: kzm9g: add NFS_TIMEOUT in config file
Tetsuyuki Kobayshi
- [U-Boot] [PATCH 2/4] arm: rmobile: kzm9g: remove unrelated config
Tetsuyuki Kobayshi
- [U-Boot] [PATCH 3/4] arm: rmobile: kzm9g: fix CPU info
Tetsuyuki Kobayshi
- [U-Boot] [PATCH 4/4] arm: rmobile: kzm9g: separate cpu_rev to integer and fraction
Tetsuyuki Kobayshi
- [U-Boot] [PATCH] dts/Makefile: Turn off system-/gcc-specific predefined macros
Horst Kronstorfer
- [U-Boot] Pull request: u-boot-net.git master
Wolfgang Denk
- [U-Boot] Pull request: u-boot-net.git next
Wolfgang Denk
- [U-Boot] [PATCH 11/13] i.MX28: Add battery boot components to SPL
Lauri Hintsala
- [U-Boot] [PATCH v4] arm : Atmel : add at91sam9x5ek board support
Bo Shen
- [U-Boot] bdi3000 configurtio file for mpc8308RDB
Avner Flesch
- [U-Boot] Board-specific commands unintentionally linked into SPL?
Tyler Olmstead
- [U-Boot] [PATCH 11/13] i.MX28: Add battery boot components to SPL
Marek Vasut
- [U-Boot] [PATCH] dts/Makefile: Turn off system-/gcc-specific predefined macros
Mike Frysinger
- [U-Boot] bdi3000 configurtio file for mpc8308RDB
Wolfgang Denk
- [U-Boot] Board-specific commands unintentionally linked into SPL?
Christian Riesch
- [U-Boot] bdi3000 configurtio file for mpc8308RDB
David Hawkins
- [U-Boot] bdi3000 configurtio file for mpc8308RDB
Kim Phillips
- [U-Boot] bdi3000 configurtio file for mpc8308RDB
Wolfgang Denk
- [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG
Bill
- [U-Boot] bdi3000 configurtio file for mpc8308RDB
David Hawkins
- [U-Boot] bdi3000 configurtio file for mpc8308RDB
David Hawkins
- [U-Boot] Board-specific commands unintentionally linked into SPL?
Tyler Olmstead
- [HACK] sabresd: add ethernet support
Kim Phillips
- [U-Boot] bdi3000 configurtio file for mpc8308RDB
Wolfgang Denk
- [U-Boot] bdi3000 configurtio file for mpc8308RDB
David Hawkins
- [U-Boot] usb_stor_BBB_transport 5 ms delay - performance
Jim Shimer
- [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG
Fabio Estevam
- [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash
Fabio Estevam
- [U-Boot] Board-specific commands unintentionally linked into SPL?
Aneesh V
- [U-Boot] [PATCH,v2] dts/Makefile: Turn off some predefined macros
Horst Kronstorfer
- [U-Boot] Board-specific commands unintentionally linked into SPL?
Christian Riesch
- [U-Boot] List of offending drivers
Marek Vasut
- [U-Boot] usb_stor_BBB_transport 5 ms delay - performance
Benoît Thébaudeau
- [U-Boot] [U-Boot-DM] List of offending drivers
Graeme Russ
- [U-Boot] [U-Boot-DM] List of offending drivers
Marek Vasut
- [U-Boot] [U-Boot-DM] List of offending drivers
Graeme Russ
- [U-Boot] [U-Boot-DM] List of offending drivers
Marek Vasut
- [U-Boot] [U-Boot-DM] List of offending drivers
Graeme Russ
- [U-Boot] [PATCH v3]: video: support exynos fimd driver for various exynos series
Donghwa Lee
- [U-Boot] [U-Boot-DM] List of offending drivers
Marek Vasut
- [U-Boot] [PATCH 1/4] arm: rmobile: kzm9g: add NFS_TIMEOUT in config file
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 4/4] arm: rmobile: kzm9g: separate cpu_rev to integer and fraction
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 3/4] arm: rmobile: kzm9g: fix CPU info
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 2/4] arm: rmobile: kzm9g: remove unrelated config
Nobuhiro Iwamatsu
- [U-Boot] [PATCH v2 0/4] mmc: sdhci: fixed some problems for Exynos
Jaehoon Chung
- [U-Boot] [PATCH v2 1/4] mmc: s5p_sdhci: set the SDHCI_QUIRK_BROKEN_R1B
Jaehoon Chung
- [U-Boot] [PATCH v2 2/4] mmc: s5p_mmc: fixed wrong function argument
Jaehoon Chung
- [U-Boot] [PATCH v2 3/4] mmc: s5p_sdhci: add the set_mmc_clk for cmu control
Jaehoon Chung
- [U-Boot] [PATCH v2 4/4] mmc: sdhci: add the udelay for completed post-request
Jaehoon Chung
- [U-Boot] [PATCH 1/1] USB: EHCI: Initialize multiple USB controllers at once
Jim Lin
- [U-Boot] [PATCH 1/2] arm: rmobile: kzm9g: Add LIBFDT support
Nobuhiro Iwamatsu
- [U-Boot] [PATCH 2/2] arm: rmobile: kzm9g: remove unrelated config
Nobuhiro Iwamatsu
- [U-Boot] Cosmetic doc typo fixes to the kwbimage feature docs
Karl O. Pinc
- [U-Boot] [PATCH] Cosmetic doc typo fixes to the kwbimage feature docs
Karl O. Pinc
- [U-Boot] [U-Boot-DM] List of offending drivers
Wolfgang Denk
- [U-Boot] usb_stor_BBB_transport 5 ms delay - performance
Jim Shimer
- [U-Boot] U-Boot on the POGO-E02
Karl O. Pinc
- [U-Boot] U-Boot on the POGO-E02
Prafulla Wadaskar
- [U-Boot] U-Boot on the POGO-E02
Wolfgang Denk
- [U-Boot] List of offending drivers
Lukasz Majewski
- [U-Boot] [STATUS] v2012.07-rc3 is out - release date July 30
Wolfgang Denk
- [U-Boot] [PATCH] Makefile: avoid "Generating asm-offsets.h" message with "-s"
Wolfgang Denk
- [U-Boot] Issue with running commands
Sughosh Ganu
- [U-Boot] [PATCH] hawkboard: Fix SPL Nand driver misconfiguration
Linu Cherian
- [U-Boot] [PATCH 0/2] New abstraction layer for handling MMC and FAT commands
Lukasz Majewski
- [U-Boot] [PATCH 1/2] mmc: New abstract function (do_mmcops_safe) for MMC subsystem
Lukasz Majewski
- [U-Boot] [PATCH 2/2] fat: New abstract function (do_fat_safe) for FAT subsystem
Lukasz Majewski
- [U-Boot] [U-Boot-DM] List of offending drivers
Marek Vasut
- [U-Boot] List of offending drivers
Marek Vasut
- [U-Boot] [PATCH v2] i.MX28: bug fixes in PMU configuration code
Stathis Voukelatos
- [U-Boot] [SOLVED] Need help to get u-boot running on the taskit stamp9g20
Markus Hubig
- [U-Boot] Strange / Unreadable console output
Markus Hubig
- [U-Boot] [PATCH 1/1] USB: EHCI: Initialize multiple USB controllers at once
Marek Vasut
- [U-Boot] [PATCH 0/2] New abstraction layer for handling MMC and FAT commands
Wolfgang Denk
- [U-Boot] [U-Boot-DM] List of offending drivers
Wolfgang Denk
- [U-Boot] [PATCH] hawkboard: Fix SPL Nand driver misconfiguration
Sughosh Ganu
- [U-Boot] Board-specific commands unintentionally linked into SPL?
Lad, Prabhakar
- [U-Boot] [PATCH 0/2] New abstraction layer for handling MMC and FAT commands
Lukasz Majewski
- [U-Boot] [PATCH] DaVinci DA8xx: fix set_cpu_clk_info()
Laurence Withers
- [U-Boot] [PATCH 0/2] New abstraction layer for handling MMC and FAT commands
Wolfgang Denk
- [U-Boot] [PATCH 0/2] New abstraction layer for handling MMC and FAT commands
Marek Vasut
- [U-Boot] [PATCH 0/2] New abstraction layer for handling MMC and FAT commands
Wolfgang Denk
- [U-Boot] [PATCH 0/2] New abstraction layer for handling MMC and FAT commands
Marek Vasut
- [U-Boot] [PATCH v2 3/7] dfu: DFU backend implementation
Wolfgang Denk
- [U-Boot] [PATCH 0/2] New abstraction layer for handling MMC and FAT commands
Lukasz Majewski
- [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation
Wolfgang Denk
- [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation
Marek Vasut
- [U-Boot] [PATCH 2/5] ehci-hcd: Boost transfer speed
Marek Vasut
- [U-Boot] [PATCH 4/5] usb_storage: Restore non-EHCI support
Marek Vasut
- [U-Boot] [PATCH 5/5] usb_storage: Adjust time-outs
Marek Vasut
- [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation
Wolfgang Denk
- [U-Boot] usb_stor_BBB_transport 5 ms delay - performance
Marek Vasut
- [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG
Bill
- [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG
Fabio Estevam
- [U-Boot] [PATCH v2 3/7] dfu: DFU backend implementation
Lukasz Majewski
- [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation
Marek Vasut
- [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation
Lukasz Majewski
- [U-Boot] [PATCH v2 3/7] dfu: DFU backend implementation
Wolfgang Denk
- [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation
Wolfgang Denk
- [U-Boot] [PATCH v2 3/7] dfu: DFU backend implementation
Lukasz Majewski
- [U-Boot] [PATCH v2 4/7] dfu: MMC specific routines for DFU operation
Wolfgang Denk
- [U-Boot] ETH RBPTR incorrect mapping for rtx volatile structure
Geoffrey Bugniot
- [U-Boot] [PATCH 2/5] ehci-hcd: Boost transfer speed
Benoît Thébaudeau
- [U-Boot] [PATCH 2/5] ehci-hcd: Boost transfer speed
Marek Vasut
- [U-Boot] [PATCH 4/5] usb_storage: Restore non-EHCI support
Benoît Thébaudeau
- [U-Boot] [PATCH 5/5] usb_storage: Adjust time-outs
Benoît Thébaudeau
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Marek Vasut
- [U-Boot] usb_stor_BBB_transport 5 ms delay - performance
Benoît Thébaudeau
- [U-Boot] usb_stor_BBB_transport 5 ms delay - performance
Marek Vasut
- [U-Boot] List of offending drivers
Igor Grinberg
- [U-Boot] cfi: Problem with Intel Strata 28F320 flash
Gerlando Falauto
- [U-Boot] [PATCH 2/5] ehci-hcd: Boost transfer speed
Benoît Thébaudeau
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Benoît Thébaudeau
- [U-Boot] Notes from the U-Boot BOF Meeting in Geneva 2012/07/12
Marek Vasut
- [U-Boot] usb_stor_BBB_transport 5 ms delay - performance
Benoît Thébaudeau
- [U-Boot] [PATCH v2] i.MX28: bug fixes in PMU configuration code
Marek Vasut
- [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces
Benoît Thébaudeau
- [U-Boot] [PATCH v2 1/9] FAT: cosmetic: Remove extra spaces
Wolfgang Denk
- [U-Boot] List of offending drivers
Marek Vasut
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Marek Vasut
- [U-Boot] [PATCH 2/5] ehci-hcd: Boost transfer speed
Marek Vasut
- [U-Boot] U-Boot on the POGO-E02
Karl O. Pinc
- [U-Boot] List of offending drivers
Igor Grinberg
- [U-Boot] List of offending drivers
Marek Vasut
- [U-Boot] Cosmetic doc typo fixes to the kwbimage feature docs
Karl O. Pinc
- [U-Boot] usb_stor_BBB_transport 5 ms delay - performance
Jim Shimer
- [U-Boot] [PATCH] km/common: remove printfs for i2c deblocking code
Gerlando Falauto
- [U-Boot] usb_stor_BBB_transport 5 ms delay - performance
Marek Vasut
- [U-Boot] [PATCH 0/7] km82xx and mgcogeXxx reworking
Gerlando Falauto
- [U-Boot] [PATCH 1/7] powerpc/82xx: remove unused define for mgcoge3ne
Gerlando Falauto
- [U-Boot] [PATCH 2/7] powerpc/82xx: move mgcoge, mgcoge3ne defines to ease subsequent merge
Gerlando Falauto
- [U-Boot] [PATCH 3/7] powerpc/82xx: merge mgcoge.h and mgcoge3ne.h into km82xx.h
Gerlando Falauto
- [U-Boot] [PATCH 4/7] powerpc/82xx: move km/km82xx-common.h within km82xx.h
Gerlando Falauto
- [U-Boot] [PATCH 5/7] powerpc/82xx: add SDRAM detection for km82xx
Gerlando Falauto
- [U-Boot] [PATCH 6/7] powerpc/82xx: use SDRAM detection for mgcoge2ne
Gerlando Falauto
- [U-Boot] [PATCH 7/7] powerpc/82xx: adapt SDRAM settings for mgcoge3ne
Gerlando Falauto
- [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG
Bill
- [U-Boot] usb_stor_BBB_transport 5 ms delay - performance
Jim Shimer
- [U-Boot] [PATCH 1/5] pxa255: Add UDC registers definitions
Łukasz Dałek
- [U-Boot] [PATCH 3/7] powerpc/82xx: merge mgcoge.h and mgcoge3ne.h into km82xx.h
Wolfgang Denk
- [U-Boot] [PATCH 2/5] drivers/usb/gadget/Makefile: Add UDC ACM and Ether
Łukasz Dałek
- [U-Boot] [PATCH 4/7] powerpc/82xx: move km/km82xx-common.h within km82xx.h
Wolfgang Denk
- [U-Boot] [PATCH 3/5] pxa255: Add USB CDC ACM driver
Łukasz Dałek
- [U-Boot] [PATCH 4/5] pxa255: Add USB Ether driver
Łukasz Dałek
- [U-Boot] [PATCH 5/5] usbether: Fixed bug when using with PXA25X chips
Łukasz Dałek
- [U-Boot] usb_stor_BBB_transport 5 ms delay - performance
Marek Vasut
- [U-Boot] [PATCH 1/3] dm: sparc: net: Fixup greth compile warnings
Marek Vasut
- [U-Boot] [PATCH 2/3] dm: sparc: common: Fixup cmd_bdinfo warnings
Marek Vasut
- [U-Boot] [PATCH 3/3] dm: sparc: Fixup the compile warnings in sparc code
Marek Vasut
- [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
Fabio Estevam
- [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG
Fabio Estevam
- [U-Boot] [PATCH] dm: mips: Import libgcc components from Linux
Marek Vasut
- [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
Marek Vasut
- [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
Fabio Estevam
- [U-Boot] [PATCH 1/3] dm: mips: Fix lb60 WDT control
Marek Vasut
- [U-Boot] [PATCH 2/3] dm: mips: Fix lb60 timer code
Marek Vasut
- [U-Boot] [PATCH 3/3] dm: mips: Fix warnings in lb60 board
Marek Vasut
- [U-Boot] [PATCH] dm: mips: Import libgcc components from Linux
Mike Frysinger
- [U-Boot] [PATCH] dm: mips: Import libgcc components from Linux
Marek Vasut
- [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
Marek Vasut
- [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
Fabio Estevam
- [U-Boot] [PATCH V2] dm: mips: Import libgcc components from Linux
Marek Vasut
- [U-Boot] [PATCH] dm: ppc: Rename CONFIG_SYS_CPU in BC3450 board
Marek Vasut
- [U-Boot] [PATCH] dm: mips: Import libgcc components from Linux
Wolfgang Denk
- [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
Wolfgang Denk
- [U-Boot] [U-Boot-DM] [PATCH V2] dm: mips: Import libgcc components from Linux
Wolfgang Denk
- [U-Boot] [U-Boot-DM] [PATCH] dm: ppc: Rename CONFIG_SYS_CPU in BC3450 board
Wolfgang Denk
- [U-Boot] [PATCH] dm: net: Fixup the armada100 FEC driver
Marek Vasut
- [U-Boot] [PATCH] dm: ppc: Fixup cpu.c warning in mpc8xx
Marek Vasut
- [U-Boot] [U-Boot-DM] [PATCH V2] dm: mips: Import libgcc components from Linux
Marek Vasut
- [U-Boot] [U-Boot-DM] [PATCH] dm: ppc: Rename CONFIG_SYS_CPU in BC3450 board
Marek Vasut
- [U-Boot] [U-Boot-DM] [PATCH V2] dm: mips: Import libgcc components from Linux
Daniel Schwierzeck
- [U-Boot] [PATCH] dm: ppc: Fixup cpu.c warning in mpc8xx
Wolfgang Denk
- [U-Boot] [U-Boot-DM] [PATCH V2] dm: mips: Import libgcc components from Linux
Wolfgang Denk
- [U-Boot] [U-Boot-DM] [PATCH V2] dm: mips: Import libgcc components from Linux
Wolfgang Denk
- [U-Boot] [U-Boot-DM] [PATCH V2] dm: mips: Import libgcc components from Linux
Marek Vasut
- [U-Boot] [PATCH] dm: ppc: Fixup cpu.c warning in mpc8xx
Marek Vasut
- [U-Boot] [PATCH] MIPS: fix renaming of inca-swap-bytes to xway-swap-bytes
daniel.schwierzeck at gmail.com
- [U-Boot] Pull request: u-boot-mips/master for v2012.07
daniel.schwierzeck at gmail.com
- [U-Boot] [PATCH] dm: ppc: Fixup cpu.c warning in mpc8xx
Wolfgang Denk
- [U-Boot] [U-Boot-DM] [PATCH V2] dm: mips: Import libgcc components from Linux
Marek Vasut
- [U-Boot] [PATCH] dm: ppc: Fixup cpu.c warning in mpc8xx
Marek Vasut
- [U-Boot] [PATCH V2] dm: ppc: Fixup cpu.c warning in mpc8xx
Marek Vasut
- [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
Marek Vasut
- [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
Marek Vasut
- [U-Boot] [PATCH] DaVinci DA8xx: fix set_cpu_clk_info()
Prabhakar Lad
- [U-Boot] [PATCH] image/FIT: Ramdisk Load, Entry address and OS tag inclusion
Jagan
- [U-Boot] [PATCH] image/FIT: Add ramdisk load, entry address and OS tag inclusion
Jagan
- [U-Boot] V3: S3c64xx: Switch all I/O to use readl/writel functio and Clear variable
Zhong Hongbo
- [U-Boot] [V3 01/15] smdk6400: Move smdk6400 board from Makefile to boards.cfg
Zhong Hongbo
- [U-Boot] [V3 02/15] S3C64XX: Switch to use readl/writel to operate nand flash
Zhong Hongbo
- [U-Boot] [V3 03/15] S3C64XX: Use readl/writel to operate uart
Zhong Hongbo
- [U-Boot] [V3 04/15] S3C64XX: add pwm for s3c64xx support
Zhong Hongbo
- [U-Boot] [V3 05/15] S3C64XX: reference s5p cpu time system for s3c64xx timer
Zhong Hongbo
- [U-Boot] [V3 06/15] S3C64xx: mov cpu_init.S to the board directory
Zhong Hongbo
- [U-Boot] [V3 07/15] S3C6400: Delete nand_spl for S3C6400
Zhong Hongbo
- [U-Boot] [V3 08/15] S3C6400: Adopt SPL framwork to support spl for nand flash
Zhong Hongbo
- [U-Boot] [V3 09/15] arm1176: Fixed No relocation.
Zhong Hongbo
- [U-Boot] [V3 10/15] S3C64XX: Change SROM init to use read/write operation
Zhong Hongbo
- [U-Boot] [V3 11/15] S3C64XX: Switch to use read/writel to operation clock system
Zhong Hongbo
- [U-Boot] [V3 12/15] S3c64xx: clear GPIO, Interrupt, Watchdog variable.
Zhong Hongbo
- [U-Boot] [V3 13/15] S3C6400: clear memory init variable
Zhong Hongbo
- [U-Boot] [V3 14/15] S3C64XX: Move s3c6400.h to cpu.h to support s3c6410 board
Zhong Hongbo
- [U-Boot] [V3 15/15] S3C6400: Remove the unused variable for S3C6400
Zhong Hongbo
- [U-Boot] [u-boot-arm/next RESEND PATCH 0/3] OMAP3: igep00x0: add nand flash and SPL support
Javier Martinez Canillas
- [U-Boot] [u-boot-arm/next RESEND PATCH 1/3] OMAP3: igep00x0: Add config option to choose flash storage memory
Javier Martinez Canillas
- [U-Boot] [u-boot-arm/next RESEND PATCH 2/3] OMAP3: mem: Add Numonyx OneNAND 200MHz timing information
Javier Martinez Canillas
- [U-Boot] [u-boot-arm/next RESEND PATCH 3/3] OMAP3: igep00x0: add SPL support for IGEP-based boards
Javier Martinez Canillas
- [U-Boot] dwc_ahsata vs ahci
Pavel Herrmann
- [U-Boot] [PATCH 1/2] COMMON: Add __stringify() function
Marek Vasut
- [U-Boot] [RFC] [PATCH 2/2] crazy: Sort u_boot_cmd at runtime
Marek Vasut
- [U-Boot] early_malloc() vs. enable_caches()
Tomas Hlavacek
- [U-Boot] [RFC] [PATCH 2/2] crazy: Sort u_boot_cmd at runtime
Wolfgang Denk
- [U-Boot] [RFC] [PATCH 2/2] crazy: Sort u_boot_cmd at runtime
Marek Vasut
- [U-Boot] [PATCH 1/2] spi: microblaze: Adds driver for Xilinx SPI controller
Stephan Linz
- [U-Boot] [PATCH 1/2] COMMON: Add __stringify() function
Wolfgang Denk
- [U-Boot] [PATCH 1/2] COMMON: Add __stringify() function
Marek Vasut
- [U-Boot] [RFC] [PATCH 2/2] crazy: Sort u_boot_cmd at runtime
Wolfgang Denk
- [U-Boot] [PATCH 1/2] COMMON: Add __stringify() function
Wolfgang Denk
- [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
Fabio Estevam
- [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG
Fabio Estevam
- [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
Fabio Estevam
- [U-Boot] mx28evk kernel does not boot with 2012.07-rc3
Wolfgang Denk
- [U-Boot] [U-Boot-DM] [PATCH 1/1] early_malloc() introduced to ARM architecture
Marek Vasut
- [U-Boot] [RFC] [PATCH 2/2] crazy: Sort u_boot_cmd at runtime
Marek Vasut
- [U-Boot] [PATCH 1/2] COMMON: Add __stringify() function
Marek Vasut
- [U-Boot] [PATCH v4] MX28: extend print_cpuinfo() to use chip information
Otavio Salvador
- [U-Boot] [PATCH v3] MX28: use a clear name for DDR2 initialization
Otavio Salvador
- [U-Boot] [PATCH 1/2] spi: microblaze: Adds driver for Xilinx SPI controller
Stephan Linz
- [U-Boot] [PATCH 2/2] microblaze: Wire up SPI driver
Stephan Linz
- [U-Boot] [RFC PATCH 0/5] Rework for mxs SoC family support
Otavio Salvador
- [U-Boot] [RFC PATCH 1/5] mxs: reorganize source directory for easy sharing of code in i.MXS SoCs
Otavio Salvador
- [U-Boot] [RFC PATCH 2/5] mxs: prefix register acessor macros with 'mxs' prefix
Otavio Salvador
- [U-Boot] [RFC PATCH 3/5] mxs: prefix register structs with 'mxs' prefix
Otavio Salvador
- [U-Boot] [RFC PATCH 4/5] mxs: Reowork SPL to use 'mxs' prefix for methods
Otavio Salvador
- [U-Boot] [RFC PATCH 5/5] mxs: rename mx28.c to mxs.c as it is common to i.MX233 and i.MX28 SoCs
Otavio Salvador
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Benoît Thébaudeau
- [U-Boot] [PATCH 2/5] ehci-hcd: Boost transfer speed
Benoît Thébaudeau
- [U-Boot] usb_stor_BBB_transport 5 ms delay - performance
Benoît Thébaudeau
- [U-Boot] [RFC PATCH 2/5] mxs: prefix register acessor macros with 'mxs' prefix
Marek Vasut
- [U-Boot] usb_stor_BBB_transport 5 ms delay - performance
Marek Vasut
- [U-Boot] [PATCH 2/5] ehci-hcd: Boost transfer speed
Marek Vasut
- [U-Boot] RFC - PatchTrack Specification (revised)
Marek Vasut
- [U-Boot] RFC - PatchTrack Specification (revised)
Graeme Russ
- [U-Boot] [U-Boot-DM] [PATCH 1/1] early_malloc() introduced to ARM architecture
Tomas Hlavacek
- [U-Boot] [U-Boot-DM] [PATCH 1/1] early_malloc() introduced to ARM architecture
Marek Vasut
- [U-Boot] dwc_ahsata vs ahci
Stefano Babic
- [U-Boot] [RFC PATCH 2/5] mxs: prefix register acessor macros with 'mxs' prefix
Stefano Babic
- [U-Boot] [RFC PATCH 2/5] mxs: prefix register acessor macros with 'mxs' prefix
Marek Vasut
- [U-Boot] bdi3000 configurtio file for mpc8308RDB
Wolfgang Denk
- [U-Boot] [PATCH v4] MX28: extend print_cpuinfo() to use chip information
Stefano Babic
- [U-Boot] [PATCH] integrator: break out common config
Albert ARIBAUD
- [U-Boot] [PATCH] integrator: break out common config
Albert ARIBAUD
- [U-Boot] early_malloc() vs. enable_caches()
Albert ARIBAUD
- [U-Boot] [V3 09/15] arm1176: Fixed No relocation.
Albert ARIBAUD
- [U-Boot] [PATCH v2] i.MX28: bug fixes in PMU configuration code
Stefano Babic
- [U-Boot] [PATCH v4] MX28: extend print_cpuinfo() to use chip information
Stefano Babic
- [U-Boot] [U-Boot-DM] early_malloc() vs. enable_caches()
Marek Vasut
- [U-Boot] [V3 09/15] arm1176: Fixed No relocation.
Zhong Hongbo
- [U-Boot] [U-Boot-DM] early_malloc() vs. enable_caches()
Graeme Russ
- [U-Boot] [V3 09/15] arm1176: Fixed No relocation.
Zhong Hongbo
- [U-Boot] [U-Boot-DM] early_malloc() vs. enable_caches()
Marek Vasut
- [U-Boot] [PATCH v4] MX28: extend print_cpuinfo() to use chip information
Otavio Salvador
- [U-Boot] building u-boot inside buildroot
Sabri Altunbas
- [U-Boot] [RFC PATCH 2/5] mxs: prefix register acessor macros with 'mxs' prefix
Otavio Salvador
- [U-Boot] [RFC PATCH 2/5] mxs: prefix register acessor macros with 'mxs' prefix
Marek Vasut
- [U-Boot] [RFC PATCH 2/5] mxs: prefix register acessor macros with 'mxs' prefix
Otavio Salvador
- [U-Boot] [RFC PATCH 2/5] mxs: prefix register acessor macros with 'mxs' prefix
Marek Vasut
- [U-Boot] [U-Boot-DM] early_malloc() vs. enable_caches()
Tomas Hlavacek
- [U-Boot] [PATCH] doc: cleanup - move board READMEs into respective board directories
Wolfgang Denk
- [U-Boot] [PATCH] Makefile: avoid "Generating asm-offsets.h" message with "-s"
Wolfgang Denk
- [U-Boot] [PATCH 2/5] ehci-hcd: Boost transfer speed
Benoît Thébaudeau
- [U-Boot] [PATCH 0/1] versatile/vexpress: board configs: Use buffered writes on Flash
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH 1/1] versatile: board configs: Use buffered writes on flash
Jagannadha Sutradharudu Teki
- [U-Boot] [PATCH 2/5] ehci-hcd: Boost transfer speed
Marek Vasut
- [U-Boot] [U-Boot-DM] early_malloc() vs. enable_caches()
Graeme Russ
- [U-Boot] building u-boot inside buildroot
Karl O. Pinc
- [U-Boot] building u-boot inside buildroot
Prafulla Wadaskar
- [U-Boot] [PATCH] dm: net: Fixup the armada100 FEC driver
Prafulla Wadaskar
- [U-Boot] [PATCH] km/common: remove printfs for i2c deblocking code
Prafulla Wadaskar
- [U-Boot] [PATCH] dm: net: Fixup the armada100 FEC driver
Marek Vasut
- [U-Boot] [PATCH 1/3] dm: mips: Fix lb60 WDT control
Marek Vasut
- [U-Boot] Cosmetic doc typo fixes to the kwbimage feature docs
Prafulla Wadaskar
- [U-Boot] [PATCH v4 0/6] tegra: Add NAND flash support
Simon Glass
- [U-Boot] [PATCH v4 1/6] nand: Try to align the default buffers
Simon Glass
- [U-Boot] [PATCH v4 2/6] tegra: Add NAND support to funcmux
Simon Glass
- [U-Boot] [PATCH v4 3/6] tegra: fdt: Add NAND controller binding and definitions
Simon Glass
- [U-Boot] [PATCH v4 4/6] tegra: fdt: Add NAND definitions to fdt
Simon Glass
- [U-Boot] [PATCH v4 5/6] tegra: nand: Add Tegra NAND driver
Simon Glass
- [U-Boot] [PATCH v4 6/6] tegra: Enable NAND on Seaboard
Simon Glass
- [U-Boot] [PATCH 1/2 v2] SDHC/MMC: fix the wrong infomation after change SD card
Huang Changming-R66093
- [U-Boot] [PATCH 1/1] USB: EHCI: Initialize multiple USB controllers at once
Jim Lin
- [U-Boot] [PATCH V2] dm: ppc: Fixup cpu.c warning in mpc8xx
Wolfgang Denk
- [U-Boot] [PATCH V2] dm: ppc: Fixup cpu.c warning in mpc8xx
Wolfgang Denk
- [U-Boot] Pull request: u-boot-mips/master for v2012.07
Wolfgang Denk
- [U-Boot] dwc_ahsata vs ahci
Lv Terry-R65388
- [U-Boot] [PATCH 3/7] powerpc/82xx: merge mgcoge.h and mgcoge3ne.h into km82xx.h
Gerlando Falauto
- [U-Boot] [U-Boot-DM] dwc_ahsata vs ahci
Marek Vasut
- [U-Boot] [PATCH] km/common: remove printfs for i2c deblocking code
Heiko Schocher
- [U-Boot] powerdown can't work (mx28)
alex
- [U-Boot] [PATCH 1/3] dm: mips: Fix lb60 WDT control
Daniel Schwierzeck
- [U-Boot] [PATCH] hawkboard: Fix SPL Nand driver misconfiguration
Sughosh Ganu
- [U-Boot] cfi: Problem with Intel Strata 28F320 flash
Heiko Schocher
- [U-Boot] cfi: Problem with Intel Strata 28F320 flash
Stefan Roese
- [U-Boot] [PATCH 0/8 V7] EXYNOS5: Enable I2C support
Simon Glass
- [U-Boot] [PATCH 1/1] USB: EHCI: Initialize multiple USB controllers at once
Marek Vasut
- [U-Boot] [PATCH 3/7] powerpc/82xx: merge mgcoge.h and mgcoge3ne.h into km82xx.h
Wolfgang Denk
- [U-Boot] multichannel mmc strangeness on omap
Steve Sakoman
- [U-Boot] [PATCH] hawkboard: Fix SPL Nand driver misconfiguration
Tom Rini
- [U-Boot] multichannel mmc strangeness on omap
Tom Rini
- [U-Boot] [PATCH 3/7] powerpc/82xx: merge mgcoge.h and mgcoge3ne.h into km82xx.h
Gerlando Falauto
- [U-Boot] building u-boot inside buildroot
Karl O. Pinc
- [U-Boot] [PATCH] dm: net: Fixup the armada100 FEC driver
Joe Hershberger
- [U-Boot] [PATCH] dm: net: Fixup the armada100 FEC driver
Marek Vasut
- [PATCH] test 1
Wolfgang Denk
- [U-Boot] [PATCH 3/7] powerpc/82xx: merge mgcoge.h and mgcoge3ne.h into km82xx.h
Wolfgang Denk
- [U-Boot] [PATCH 1/3] DaVinci DA8xx: tidy up clock ID definition
Laurence Withers
- [U-Boot] [PATCH 2/3] DaVinci DA850: UART2 clock ID comes from ASYNC3
Laurence Withers
- [U-Boot] [PATCH 3/3] DaVinci DA8xx: replace magic number for DDR speed
Laurence Withers
- [U-Boot] [PATCH] DaVinci DA8xx: fix set_cpu_clk_info()
Laurence Withers
- [U-Boot] [PATCH 3/3] DaVinci DA8xx: replace magic number for DDR speed
Laurence Withers
- [U-Boot] [PATCH 0/17]: Improve am33xx support
Tom Rini
- [U-Boot] [PATCH 01/17] omap3/omap4/omap5/am33xx: Use a common running_from_sdram function
Tom Rini
- [U-Boot] [PATCH 02/17] am335x_evm: Update config for common usage
Tom Rini
- [U-Boot] [PATCH 03/17] am33xx: Remove DMM_BASE define
Tom Rini
- [U-Boot] [PATCH 04/17] am33xx: Convert to using <asm/emif.h> to describe the EMIF
Tom Rini
- [U-Boot] [PATCH 05/17] am33xx: Remove extra check in enable_ddr_clocks
Tom Rini
- [U-Boot] [PATCH 06/17] am33xx: Bugfix to config_sdram()
Tom Rini
- [U-Boot] [PATCH 07/17] am33xx: Rework DDR2 EMIF initalization slightly
Tom Rini
- [U-Boot] [PATCH 08/17] am33xx: Make config_cmd_ctrl / config_ddr_data take const structs
Tom Rini
- [U-Boot] [PATCH 09/17] am33xx: Pass to config_ddr the type of memory that is connected
Tom Rini
- [U-Boot] [PATCH 10/17] am33xx: Move the call to ddr_pll_config, make it take the frequency
Tom Rini
- [U-Boot] [PATCH 11/17] am33xx: Clean up unused DDR defines, prefix more with 'DDR2'
Tom Rini
- [U-Boot] [PATCH 12/17] am335x: ddr_defs: Update EMIF parameters
Tom Rini
- [U-Boot] [PATCH 13/17] am33xx: Document what we're doing with ddrctrl->ddrckectrl
Tom Rini
- [U-Boot] [PATCH 14/17] am33xx: Turn a number of 'int' functions to 'void'
Tom Rini
- [U-Boot] [PATCH 15/17] am33xx: Use emif_regs struct for storing initialization values
Tom Rini
- [U-Boot] [PATCH 16/17] am33xx: Rework config_io_ctrl slightly
Tom Rini
- [U-Boot] [PATCH 17/17] am33xx: Do not touch 'ratio1' fields
Tom Rini
- [U-Boot] multichannel mmc strangeness on omap
Steve Sakoman
- [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG
Bill
- [U-Boot] [u-boot-arm/next RESEND PATCH 0/3] OMAP3: igep00x0: add nand flash and SPL support
Tom Rini
- [U-Boot] [PATCH v3 0/8] CPSW switch plus SPL net support
Tom Rini
- [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG
Fabio Estevam
- [U-Boot] [PATCH 3/3] DaVinci DA8xx: replace magic number for DDR speed
Tom Rini
- [U-Boot] [PATCH v4 0/6] tegra: Add NAND flash support
Tom Warren
- [U-Boot] [PATCH v4 0/6] tegra: Add NAND flash support
Stephen Warren
- [U-Boot] [PATCH] tegra: enable NAND on Harmony
Stephen Warren
- [U-Boot] [PATCH] env_nand: align NAND buffers
Stephen Warren
- [U-Boot] [PATCH v4 0/6] tegra: Add NAND flash support
Tom Warren
- [U-Boot] [PATCH] at91: Add support for taskit AT91SAM9G20 boards.
Markus Hubig
- [U-Boot] [PATCH] km/common: remove printfs for i2c deblocking code
Prafulla Wadaskar
- [U-Boot] [PATCH 3/7] powerpc/82xx: merge mgcoge.h and mgcoge3ne.h into km82xx.h
Gerlando Falauto
- [U-Boot] [PATCH v2 3/7] powerpc/82xx: merge mgcoge.h and mgcoge3ne.h into km82xx.h
Gerlando Falauto
- [U-Boot] [PATCH] hawkboard: Fix SPL Nand driver misconfiguration
Wolfgang Denk
- [U-Boot] [PATCH 4/7] powerpc/82xx: move km/km82xx-common.h within km82xx.h
Gerlando Falauto
- [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG
Bill
- [U-Boot] [PATCH 4/7] powerpc/82xx: move km/km82xx-common.h within km82xx.h
Wolfgang Denk
- [U-Boot] usb_test_unit_ready called every block read - performance
Jim Shimer
- [U-Boot] [STATUS] v2012.07 released, Merge Window is OPEN
Wolfgang Denk
- [U-Boot] [PATCH 18/17] am33xx: Correct and clean up ddr_regs struct
Tom Rini
- [U-Boot] pull request for u-boot-tegra/master
Tom Warren
- [U-Boot] [PATCH] tegra: enable NAND on Harmony
Simon Glass
- [U-Boot] [PATCH] env_nand: align NAND buffers
Simon Glass
- [U-Boot] [PATCH] lsxl: support power switch
Michael Walle
- [U-Boot] [PATCH 1/3] mmc: detect boot sectors using EXT_CSD_BOOT_MULT too
Stephen Warren
- [U-Boot] [PATCH 1/3] mmc: detect boot sectors using EXT_CSD_BOOT_MULT too
Stephen Warren
- [U-Boot] [PATCH 2/3] env_mmc: allow environment to be in an eMMC partition
Stephen Warren
- [U-Boot] [PATCH 3/3] tegra: put eMMC environment into the boot sectors
Stephen Warren
- [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG
Fabio Estevam
- [U-Boot] [PATCH] net: Improve the speed of netconsole
Joe Hershberger
- [U-Boot] [PATCH] env_nand: align NAND buffers
Wolfgang Denk
- [U-Boot] [PATCH] env_nand: align NAND buffers
Simon Glass
- [U-Boot] [RESEND] [PATCH 0/2] kirkwood: Generalise dns325 support, include dns320
Jamie Lentin
- [U-Boot] [PATCH 1/2] kirkwood: Rename dns325 to dnskw
Jamie Lentin
- [U-Boot] [PATCH 2/2] kirkwood: Add support for the D-Link DNS-320
Jamie Lentin
- [U-Boot] [PATCH v4 5/6] tegra: nand: Add Tegra NAND driver
Scott Wood
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Marek Vasut
- [U-Boot] [PATCH v4 1/6] nand: Try to align the default buffers
Scott Wood
- [U-Boot] [PATCH v4 4/6] tegra: fdt: Add NAND definitions to fdt
Scott Wood
- [U-Boot] usb_test_unit_ready called every block read - performance
Marek Vasut
- [U-Boot] [PATCH] env_nand: align NAND buffers
Scott Wood
- [U-Boot] [PATCH v4 3/6] tegra: fdt: Add NAND controller binding and definitions
Scott Wood
- [U-Boot] usb_test_unit_ready called every block read - performance
Jim Shimer
- [U-Boot] usb_test_unit_ready called every block read - performance
Marek Vasut
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Benoît Thébaudeau
- [U-Boot] usb_test_unit_ready called every block read - performance
Jim Shimer
- [U-Boot] [PATCH 1/1] USB: EHCI: Initialize multiple USB controllers at once
Jim Lin
- [U-Boot] usb_test_unit_ready called every block read - performance
Wolfgang Denk
- [U-Boot] Help with u-boot
Андрей Борисович
- [U-Boot] [PATCH 1/2] spi: microblaze: Adds driver for Xilinx SPI controller
Michal Simek
- [U-Boot] [PATCH 2/2] microblaze: Wire up SPI driver
Michal Simek
- [U-Boot] Pull request - microblaze
Michal Simek
- [U-Boot] [PATCH 1/1] USB: EHCI: Initialize multiple USB controllers at once
Marek Vasut
- [U-Boot] [RESEND] [PATCH 0/2] kirkwood: Generalise dns325 support, include dns320
Prafulla Wadaskar
- [U-Boot] [PATCH] tegra: enable NAND on Harmony
Thierry Reding
- [U-Boot] [PATCH 2/2] kirkwood: Add support for the D-Link DNS-320
Prafulla Wadaskar
- [U-Boot] i.MX(6) dcache status?
Dirk Behme
- [U-Boot] [PATCH] lsxl: support power switch
Prafulla Wadaskar
- [U-Boot] i.MX(6) dcache status?
Dirk Behme
- [U-Boot] [PATCH v4 0/6] tegra: Add NAND flash support
Thierry Reding
- [U-Boot] [PATCH 1/2] cmd_nand: dump: Align data and OOB buffers
Thierry Reding
- [U-Boot] [PATCH 2/2] tegra: Enable NAND on TEC
Thierry Reding
- [U-Boot] [PATCH v3 0/7] dfu:usb: DFU support via USB Download gadget
Lukasz Majewski
- [U-Boot] [PATCH v3 1/7] dfu:usb: Support for g_dnl composite download gadget.
Lukasz Majewski
- [U-Boot] [PATCH v3 2/7] dfu:usb: DFU USB function (f_dfu) support for g_dnl composite gadget
Lukasz Majewski
- [U-Boot] [PATCH v3 3/7] dfu: DFU backend implementation
Lukasz Majewski
- [U-Boot] [PATCH v3 4/7] dfu: MMC specific routines for DFU operation
Lukasz Majewski
- [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command
Lukasz Majewski
- [U-Boot] [PATCH v3 6/7] arm:trats: Support for USB UDC driver at TRATS board.
Lukasz Majewski
- [U-Boot] [PATCH v3 7/7] arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATS
Lukasz Majewski
- [U-Boot] [PATCH 1/2] cmd_nand: dump: Align data and OOB buffers
Simon Glass
- [U-Boot] [PATCH 1/2] add ST PSD4256G6V to table of supported legacy flashs
Mike Frysinger
- [U-Boot] [PATCH 2/2] Blackfin: bf533-ezkit: convert to CFI flash driver
Mike Frysinger
- [U-Boot] [U-Boot-DM] List of offending drivers
Mike Frysinger
- [U-Boot] [PATCH v2] Add support for Bluegiga APX4 Development Kit
Lauri Hintsala
- [U-Boot] [PATCH] remove usb_test_unit_ready from usb_stor_read+usb_stor_write
James Shimer
- [U-Boot] [PATCH] dm: mips: Import libgcc components from Linux
Mike Frysinger
- [U-Boot] [i2c] Pull request
Heiko Schocher
- [U-Boot] [PATCH 1/2] COMMON: Add __stringify() function
Mike Frysinger
- [U-Boot] building u-boot inside buildroot
Mike Frysinger
- [U-Boot] [RESEND] [PATCH 0/2] kirkwood: Generalise dns325 support, include dns320
Jamie Lentin
- [U-Boot] [PATCH v3 6/7] arm:trats: Support for USB UDC driver at TRATS board.
Minkyu Kang
- [U-Boot] [PATCH v3 7/7] arm:trats: Enable g_dnl composite USB gadget with embedded DFU function on TRATS
Minkyu Kang
- [U-Boot] [PATCH 01/17] omap3/omap4/omap5/am33xx: Use a common running_from_sdram function
R, Sricharan
- [U-Boot] [PATCH] fix out of tree building with kallsyms
Mike Frysinger
- [U-Boot] [PATCH 1/2] add ST PSD4256G6V to table of supported legacy flashs
Stefan Roese
- [U-Boot] [PATCH 2/2] kirkwood: Add support for the D-Link DNS-320
Jamie Lentin
- [U-Boot] [PATCH 9/9] mx6qsabrelite: Add splaschscreen support
Dirk Behme
- [U-Boot] [PATCH v4 4/6] tegra: fdt: Add NAND definitions to fdt
Simon Glass
- [U-Boot] [PATCH v4 3/6] tegra: fdt: Add NAND controller binding and definitions
Simon Glass
- [U-Boot] [PATCH v3 06/18] tegra: fdt: Add LCD definitions for Tegra
Simon Glass
- [U-Boot] [PATCH v3 0/18] tegra: Add display driver and LCD support for Seaboard
Simon Glass
- [U-Boot] [PATCH v2 0/4] DaVinci DA8xx: tidy up clock IDs
Laurence Withers
- [U-Boot] [PATCH v2 1/4] DaVinci DA8xx: tidy up clock ID definition
Laurence Withers
- [U-Boot] [PATCH v2 2/4] DaVinci DA850: UART2 clock ID comes from ASYNC3
Laurence Withers
- [U-Boot] [PATCH v2 3/4] DaVinci DA8xx: replace magic number for DDR speed
Laurence Withers
- [U-Boot] [PATCH v2 4/4] DaVinci DA8xx: fix set_cpu_clk_info()
Laurence Withers
- [U-Boot] [PATCH] Blackfin: adjust asm constraints with NMI workaround
Mike Frysinger
- [U-Boot] [PATCH] Blackfin: initcode: mark uncommon code paths as unlikely
Mike Frysinger
- [U-Boot] [PATCH v3 06/18] tegra: fdt: Add LCD definitions for Tegra
Thierry Reding
- [U-Boot] [PATCH v2] Add support for Bluegiga APX4 Development Kit
Stefano Babic
- [U-Boot] [RESEND] [PATCH 0/2] kirkwood: Generalise dns325 support, include dns320
Prafulla Wadaskar
- [U-Boot] [PATCH 0/8] EXYNOS5: Enable SPI support
Rajeshwari Shinde
- [U-Boot] [PATCH 1/8] EXYNOS5: Add pinmux support for SPI
Rajeshwari Shinde
- [U-Boot] [PATCH 2/8] SPI: Add W25Q32 to Winbond SPI flash table
Rajeshwari Shinde
- [U-Boot] [PATCH 3/8] EXYNOS: Add clock for SPI.
Rajeshwari Shinde
- [U-Boot] [PATCH 4/8] EXYNOS5: Add base address for SPI.
Rajeshwari Shinde
- [U-Boot] [PATCH 5/8] SPI: Add SPI slave mode flag
Rajeshwari Shinde
- [U-Boot] [PATCH 6/8] SPI: Add SPI Driver for EXYNOS.
Rajeshwari Shinde
- [U-Boot] [PATCH 7/8] EXYNOS5: Enable SPI
Rajeshwari Shinde
- [U-Boot] [PATCH 8/8] EXYNOS5: Enable SPI booting.
Rajeshwari Shinde
- [U-Boot] [PATCH] lsxl: support power switch
Michael Walle
- [U-Boot] [PATCH v2] Add support for Bluegiga APX4 Development Kit
Lauri Hintsala
- [U-Boot] [PATCH 0/8 V2] EXYNOS5: Enable SPI support
Rajeshwari Shinde
- [U-Boot] [PATCH 1/8 V2] EXYNOS5: Add pinmux support for SPI
Rajeshwari Shinde
- [U-Boot] [PATCH 2/8 V2] SPI: Add W25Q32 to Winbond SPI flash table
Rajeshwari Shinde
- [U-Boot] [PATCH 3/8 V2] EXYNOS: Add clock for SPI.
Rajeshwari Shinde
- [U-Boot] [PATCH 4/8 V2] EXYNOS5: Add base address for SPI.
Rajeshwari Shinde
- [U-Boot] [PATCH 5/8] SPI: Add SPI slave mode flag
Rajeshwari Shinde
- [U-Boot] [PATCH 6/8 V2] SPI: Add SPI Driver for EXYNOS.
Rajeshwari Shinde
- [U-Boot] [PATCH 7/8 V2] EXYNOS5: Enable SPI
Rajeshwari Shinde
- [U-Boot] [PATCH 8/8 V2] EXYNOS5: Enable SPI booting.
Rajeshwari Shinde
- [U-Boot] [PATCH] lsxl: support power switch
Prafulla Wadaskar
- [U-Boot] [PATCH v2] Add support for Bluegiga APX4 Development Kit
Stefano Babic
- [U-Boot] i.MX(6) dcache status?
Marek Vasut
- [U-Boot] [PATCH 5/8] SPI: Add SPI slave mode flag
Mike Frysinger
- [U-Boot] [PATCH 1/2] add ST PSD4256G6V to table of supported legacy flashs
Mike Frysinger
- [U-Boot] i.MX35PDK: Starting U-Boot from serial NOR-Flash
Michael Hornung
- [U-Boot] [PATCH 1/2] COMMON: Add __stringify() function
Marek Vasut
- [U-Boot] [PATCH 1/2] COMMON: Add __stringify() function
Mike Frysinger
- [U-Boot] [PATCH 1/2] COMMON: Add __stringify() function
Marek Vasut
- [U-Boot] [PATCH 1/2] COMMON: Add __stringify() function
Mike Frysinger
- [U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG
Bill
- [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Mike Frysinger
- [U-Boot] [PATCH 01/17] omap3/omap4/omap5/am33xx: Use a common running_from_sdram function
Tom Rini
- [U-Boot] [PATCH 01/17] omap3/omap4/omap5/am33xx: Use a common running_from_sdram function
R, Sricharan
- [U-Boot] early_malloc outline
Tomas Hlavacek
- [U-Boot] [PATCH 1/2] cmd_nand: dump: Align data and OOB buffers
Stephen Warren
- [U-Boot] [PATCH 2/2] tegra: Enable NAND on TEC
Stephen Warren
- [U-Boot] [PATCH 01/17] omap3/omap4/omap5/am33xx: Use a common running_from_sdram function
Tom Rini
- [U-Boot] [PATCH v2 1/2] bcm: Add GPIO driver
Vikram Narayanan
- [U-Boot] [PATCH 01/17] omap3/omap4/omap5/am33xx: Use a common running_from_sdram function
R, Sricharan
- [U-Boot] [PATCH] tegra: harmony: fix comments for environment config options
Stephen Warren
- [U-Boot] [PATCH v2 1/2] bcm: Add GPIO driver
Stephen Warren
- [U-Boot] [PATCH] tegra: harmony: fix comments for environment config options
Tom Warren
- [U-Boot] [PATCH v2] net: Make netconsole src and dest ports configurable
Joe Hershberger
- [U-Boot] [PATCH v2] net: Make the netconsole buffer size configurable
Joe Hershberger
- [U-Boot] [PATCH v2 1/2] bcm: Add GPIO driver
Vikram Narayanan
- [U-Boot] [u-boot-arm/next RESEND PATCH 0/3] OMAP3: igep00x0: add nand flash and SPL support
Javier Martinez Canillas
- [U-Boot] [PATCH v3 06/18] tegra: fdt: Add LCD definitions for Tegra
Stephen Warren
- [U-Boot] [PATCH 1/2] cmd_nand: dump: Align data and OOB buffers
Scott Wood
- [U-Boot] [PATCH] env_nand: align NAND buffers
Scott Wood
- [U-Boot] [PATCH v3 5/7] dfu:cmd: Support for DFU u-boot command
Stephen Warren
- [U-Boot] [PATCH 2/2] kirkwood: Add support for the D-Link DNS-320
Stefan Herbrechtsmeier
- [U-Boot] [PATCH v3 0/2] Add GPIO driver for BCM2835 SoC
Vikram Narayanan
- [U-Boot] [PATCH v3 1/2] gpio: bcm2835: Add GPIO driver
Vikram Narayanan
- [U-Boot] [PATCH v3 2/2] rbpi: Add BCM2835 GPIO driver for raspberry pi
Vikram Narayanan
- [U-Boot] [PATCH 2/2] tegra: Enable NAND on TEC
Thierry Reding
- [U-Boot] [PATCH] tegra: harmony: fix comments for environment config options
Thierry Reding
- [U-Boot] [PATCH] mx28evk: Turn on caches
Fabio Estevam
- [U-Boot] multiple definition of `reloc_dst'
Sabri Altunbas
- [U-Boot] mx53loco hangs on 2012.07
Fabio Estevam
- [U-Boot] multiple definition of `reloc_dst'
Sabri Altunbas
- [U-Boot] mx53loco hangs on 2012.07
Robert Nelson
- [U-Boot] [PATCH 00/11] Support for ST-Ericsson snowball board
mathieu.poirier at linaro.org
- [U-Boot] [PATCH 01/11] snowball: Add support for ux500 based snowball board
mathieu.poirier at linaro.org
- [U-Boot] [PATCH 02/11] u8500: Moving prcmu to cpu directory
mathieu.poirier at linaro.org
- [U-Boot] [PATCH 03/11] snowball: Adding architecture dependent initialisation
mathieu.poirier at linaro.org
- [U-Boot] [PATCH 04/11] snowball: Adding CPU clock initialisation
mathieu.poirier at linaro.org
- [U-Boot] [PATCH 05/11] snowball: Moving to ux500.v2 addess scheme for PRCMU access
mathieu.poirier at linaro.org
- [U-Boot] [PATCH 06/11] snowball: applying power to LAN and GBF controllers
mathieu.poirier at linaro.org
- [U-Boot] [PATCH 07/11] u8500: Moving processor-specific functions to cpu area.
mathieu.poirier at linaro.org
- [U-Boot] [PATCH 08/11] u8500: Enabling power to MMC device on AB8500 V2
mathieu.poirier at linaro.org
- [U-Boot] [PATCH 09/11] u8500: Separating mmc config parameters from driver
mathieu.poirier at linaro.org
- [U-Boot] [PATCH 10/11] armv7: Adding cpu specific cache managmenent
mathieu.poirier at linaro.org
- [U-Boot] [PATCH 11/11] snowball: Adding board specific cache cleanup routine
mathieu.poirier at linaro.org
- [U-Boot] mx53loco hangs on 2012.07
Fabio Estevam
- [U-Boot] [PATCH] mx53loco: Define CONFIG_BOARD_LATE_INIT
Fabio Estevam
- [U-Boot] [PATCH] mx53loco: Define CONFIG_BOARD_LATE_INIT
Fabio Estevam
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Stefan Herbrechtsmeier
- [U-Boot] early_malloc outline
Wolfgang Denk
- [U-Boot] Pull request u-boot-blackfin.git (sf branch)
Wolfgang Denk
- [U-Boot] [PATCH] mx53loco: Define CONFIG_BOARD_LATE_INIT
Wolfgang Denk
- [U-Boot] [PATCH] mx53loco: Define CONFIG_BOARD_LATE_INIT
Wolfgang Denk
- [U-Boot] [PATCH v2 2/5] ehci-hcd: Boost transfer speed
Stefan Herbrechtsmeier
- [U-Boot] Pull request - microblaze
Wolfgang Denk
- [U-Boot] [i2c] Pull request
Wolfgang Denk
- [U-Boot] [PATCH] lsxl: support power switch
Michael Walle
- [U-Boot] [PATCH] SMDK6400: Add MAINTAINERS entry
Wolfgang Denk
- [U-Boot] [PATCH 1/7] powerpc/82xx: remove unused define for mgcoge3ne
Wolfgang Denk
- [U-Boot] [PATCH 2/7] powerpc/82xx: move mgcoge, mgcoge3ne defines to ease subsequent merge
Wolfgang Denk
- [U-Boot] [PATCH 3/7] powerpc/82xx: merge mgcoge.h and mgcoge3ne.h into km82xx.h
Wolfgang Denk
- [U-Boot] [PATCH 4/7] powerpc/82xx: move km/km82xx-common.h within km82xx.h
Wolfgang Denk
- [U-Boot] [PATCH 5/7] powerpc/82xx: add SDRAM detection for km82xx
Wolfgang Denk
- [U-Boot] [PATCH 6/7] powerpc/82xx: use SDRAM detection for mgcoge2ne
Wolfgang Denk
- [U-Boot] [PATCH 7/7] powerpc/82xx: adapt SDRAM settings for mgcoge3ne
Wolfgang Denk
- [U-Boot] [PATCH] mx53loco: Define CONFIG_BOARD_LATE_INIT
stefano babic
- [U-Boot] [PATCH] mx53loco: Define CONFIG_BOARD_LATE_INIT
Wolfgang Denk
- [U-Boot] [PATCH] mx53loco: Define CONFIG_BOARD_LATE_INIT
stefano babic
- [U-Boot] [PATCH 01/17] omap3/omap4/omap5/am33xx: Use a common running_from_sdram function
Tom Rini
- [U-Boot] [PATCH 0/5]: Further update am33xx support
Tom Rini
- [U-Boot] [PATCH 1/5] am33xx: Enable gpio0 clock
Tom Rini
- [U-Boot] [PATCH 2/5] am33xx: Remove board/ti/am335x/evm.c
Tom Rini
- [U-Boot] [PATCH 3/5] am33xx: Add support for TI AM335x StarterKit EVM
Tom Rini
- [U-Boot] [PATCH 4/5] am33xx evm: Add CONFIG_CMD_EEPROM and related
Tom Rini
- [U-Boot] [PATCH 5/5] am33xx: Rework pinmux functions
Tom Rini
- [U-Boot] [PATCH] mx28evk: Turn on caches
stefano babic
- [U-Boot] [PATCH] mx53loco: Define CONFIG_BOARD_LATE_INIT
stefano babic
Last message date:
Tue Jul 31 23:20:03 CEST 2012
Archived on: Wed Sep 19 02:22:56 CEST 2012
This archive was generated by
Pipermail 0.09 (Mailman edition).