[U-Boot] Please pull u-boot-atmel/master

[Andreas Bießmann]

Dear Albert Aribaud,

The following changes since commit 3e0cac6b5158b22248f57cdf7769bf8d610fec5e:

  EXYNOS: SMDK5250: Enable the pinmux setup (2012-06-25 22:51:36 +0200)

are available in the git repository at:

  git://git.denx.de/u-boot-atmel.git master

for you to fetch changes up to f3f68232e709a1108b631410087d526cc23dfb55:

  AT91SAM9*: Change kernel address in dataflash to match u-boot's size (2012-07-02 22:15:05 +0200)

----------------------------------------------------------------
Alexandre Belloni (1):
      AT91SAM9*: Change kernel address in dataflash to match u-boot's size

Andreas Bießmann (1):
      ehci-atmel: fix compiler warning

Bo Shen (3):
      Atmel : usb : add EHCI driver for Atmel SoC
      AT91: at91sam9m10g45ek : Enable EHCI instead OHCI
      ATMEL/PIO: Enable new feature of PIO on Atmel device

esw at bus-elektronik.de (2):
      Fix: brocken boot message at serial line on AT91SAM9263-EK board
      Fix: AT91SAM9263 nor flash usage

 arch/arm/include/asm/arch-at91/at91_pio.h |   45 ++++++++++-
 board/atmel/at91sam9260ek/partition.c     |    6 +-
 board/atmel/at91sam9261ek/partition.c     |    6 +-
 board/atmel/at91sam9263ek/at91sam9263ek.c |    2 +-
 board/atmel/at91sam9263ek/partition.c     |    6 +-
 board/atmel/at91sam9rlek/partition.c      |    6 +-
 drivers/gpio/at91_gpio.c                  |  125 ++++++++++++++++++++++++++++-
 drivers/usb/host/Makefile                 |    1 +
 drivers/usb/host/ehci-atmel.c             |   89 ++++++++++++++++++++
 include/configs/at91sam9260ek.h           |    5 +-
 include/configs/at91sam9261ek.h           |    5 +-
 include/configs/at91sam9263ek.h           |   10 ++-
 include/configs/at91sam9m10g45ek.h        |   20 +----
 include/configs/at91sam9rlek.h            |    3 +-
 14 files changed, 288 insertions(+), 41 deletions(-)
 create mode 100644 drivers/usb/host/ehci-atmel.c

Best regards

Andreas Bießmann