[U-Boot] Please pull u-boot-staging.git/sr at denx.de
Stefan Roese
sr at denx.de
Thu Jul 5 15:10:26 CEST 2012
Hi Albert,
as you seem to be working on U-Boot patches right now, here another short
reminder from me. ;)
Thanks,
Stefan
On Friday 22 June 2012 08:01:15 Stefan Roese wrote:
> Hi Albert,
>
> as you requested, here a short reminder...
>
> On Tuesday 05 June 2012 08:58:26 Stefan Roese wrote:
> > Hi Albert!
> >
> > I have collected all of the remaining ARM/SPEAr patches in my
> > staging repository. There are some dependencies between the
> > patches, so I also added the NOR, NAND and ethernet patches
> > in this pull request. The patches have the Acked-by from the
> > corresponding custodians (Joe for networking, Scott for NAND,
> > myself for NOR).
> >
> > Since most of the patches are ARM/SPEAr platform related, I'm
> > pushing the patchset through your ARM repository. Please pull
> > and push to Wolfgang.
> >
> > Thanks,
> > Stefan
> >
> >
> > The following changes since commit
> >
> > 4398d55991eb3c2484a2a8e991d701e5d7a64874:
> > net: sh-eth: Add support Gigabit of SH7734 (2012-05-23 17:53:09 -0500)
> >
> > are available in the git repository at:
> > git://www.denx.de/git/u-boot-staging.git sr at denx.de
> >
> > for you to fetch changes up to e94b7cb06a246532aba7af9e0f2040d4facba5db:
> > MTD: SPEAr SMI: Add write support for length < 4 bytes (2012-06-05
> >
> > 08:42:50 +0200)
> >
> > ----------------------------------------------------------------
> >
> > Amit Virdi (10):
> > st_smi: Return error in case TFF is not set
> > st_smi: Change SMI timeout values
> > st_smi: Enhance the error handling
> > st_smi: Change timeout loop implementation
> > SPEAr: Fix ARM relocation support
> > SPEAr: Eliminate dependency on Xloader table
> > SPEAr: Initialize SNOR in early_board_init_f
> > SPEAr: Remove CONFIG_MTD_NAND_VERIFY_WRITE to speed up NAND access
> > cleanup/SPEAr: Remove unnecessary parenthesis
> > cleanup/SPEAr: Define configuration flags more elegantly
> >
> > Armando Visconti (4):
> > st_smi: Removed no needed dependency on ST_M25Pxx_ID
> > st_smi: Change the flash probing method
> > st_smi: Fix bug in flash_print_info()
> > st_smi: Fixed page size for Winbond W25Q128FV flash
> >
> > Shiraz Hashim (5):
> > st_smi: Move status register read before modifying ctrl register
> > SPEAr: Enable autoneg for ethernet
> > SPEAr: Enable dcache for fast file transfer
> > SPEAr: explicitly select clk src for UART
> > SPEAr: Correct SoC ID offset in misc configuration space
> >
> > Simon Glass (1):
> > arm: Don't use printf() in SPL builds
> >
> > Stefan Roese (10):
> > net: Multiple updates/enhancements to designware.c
> > GPIO: Add SPEAr GPIO driver
> > SPL: common/Makefile: Add image.c to SPL build
> > SPL: lib/Makefile: Add crc32.c to SPL build
> > SPL: ARM: spear: Remove some objects from SPL build
> > Makefile: Add u-boot.spr build target (SPEAr)
> > SPL: ARM: spear: Add SPL support for SPEAr600 platform
> > rtc/m41t62: Add support for M41T82 with HT (Halt Update)
> > i2c: designware_i2c.c: Add support for the "i2c probe" command
> > MTD: SPEAr SMI: Add write support for length < 4 bytes
> >
> > Vipin KUMAR (14):
> > mtd/NAND: Add FSMC driver support
> > SPEAr: Configure FSMC driver for NAND interface
> > mtd/NAND: Remove obsolete SPEAr specific NAND drivers
> > st_smi: Add support for SPEAr SMI driver
> > st_smi: Read status until timeout happens
> > SPEAr: Place ethaddr write and read within CONFIG_CMD_NET
> > SPEAr: Configure network support for spear SoCs
> > SPEAr: Add macb driver support for spear310 and spear320
> > SPEAr: Add basic arch related support for SPEAr SoCs
> > SPEAr: Add configuration options for spear3xx and spear6xx boards
> > SPEAr: Remove unused flag (CONFIG_SYS_HZ_CLOCK)
> > SPEAr: Change the default environment variables
> > SPEAr: Enable usb device high speed support
> > SPEAr: Enable udc and usb-console support only for usbtty
> >
> > configuration
> >
> > Vipin Kumar (6):
> > st_smi: Fix smi read status
> > SPEAr: Add interface information in initialization
> > SPEAr: Enable CONFIG_SYS_FLASH_PROTECTION
> > SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE
> > SPEAr: Enable CONFIG_SYS_FLASH_EMPTY_INFO macro
> > SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and
> > evb
> >
> > Makefile | 17 +
> > arch/arm/cpu/arm926ejs/spear/Makefile | 25 +-
> > arch/arm/cpu/arm926ejs/spear/cpu.c | 87 ++++
> > arch/arm/cpu/arm926ejs/spear/spear600.c | 236 ++++++++++
> > arch/arm/cpu/arm926ejs/spear/spl.c | 282 ++++++++++++
> > arch/arm/cpu/arm926ejs/spear/spl_boot.c | 197 ++++++++
> > .../spear/spr600_mt47h128m8_3_266_cl5_async.c | 130 ++++++
> > .../spear/spr600_mt47h32m16_333_cl5_psync.c | 135 ++++++
> > .../spear/spr600_mt47h32m16_37e_166_cl4_sync.c | 130 ++++++
> > .../spear/spr600_mt47h64m16_3_333_cl5_psync.c | 144 ++++++
> > arch/arm/cpu/arm926ejs/spear/start.S | 122 +++++
> > arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 87 ++++
> > arch/arm/include/asm/arch-spear/clk.h | 27 ++
> > arch/arm/include/asm/arch-spear/gpio.h | 40 ++
> > arch/arm/include/asm/arch-spear/hardware.h | 63 ++-
> > arch/arm/include/asm/arch-spear/spr_defs.h | 23 +
> > arch/arm/include/asm/arch-spear/spr_gpt.h | 4 +-
> > arch/arm/include/asm/arch-spear/spr_misc.h | 147 +++++-
> > arch/arm/include/asm/arch-spear/spr_nand.h | 57 ---
> > arch/arm/include/asm/arch-spear/spr_ssp.h | 45 ++
> > arch/arm/include/asm/arch-spear/spr_syscntl.h | 14 +
> > .../arm/include/asm/arch-spear/spr_xloader_table.h | 67 ---
> > arch/arm/lib/eabi_compat.c | 3 +-
> > board/spear/common/Makefile | 2 +
> > board/spear/common/spr_misc.c | 102 ++--
> > board/spear/spear300/config.mk | 39 --
> > board/spear/spear300/spear300.c | 27 +-
> > board/spear/spear310/config.mk | 44 --
> > board/spear/spear310/spear310.c | 44 +-
> > board/spear/spear320/config.mk | 44 --
> > board/spear/spear320/spear320.c | 43 +-
> > board/spear/spear600/Makefile | 2 +
> > board/spear/spear600/config.mk | 39 --
> > board/spear/spear600/spear600.c | 30 +-
> > boards.cfg | 24 +-
> > common/Makefile | 2 +-
> > config.mk | 4 +
> > doc/README.spear | 54 ++-
> > drivers/gpio/Makefile | 1 +
> > drivers/gpio/spear_gpio.c | 102 ++++
> > drivers/i2c/designware_i2c.c | 16 +-
> > drivers/mtd/Makefile | 2 +-
> > drivers/mtd/nand/Makefile | 1 +
> > drivers/mtd/nand/fsmc_nand.c | 486
> >
> > ++++++++++++++++++++ drivers/mtd/nand/spr_nand.c |
> > 124 -----
> >
> > drivers/mtd/{spr_smi.c => st_smi.c} | 255 ++++++----
> > drivers/net/designware.c | 126 +++--
> > drivers/net/designware.h | 2 +
> > drivers/rtc/m41t62.c | 10 +-
> > include/configs/spear-common.h | 94 ++--
> > include/configs/{spear3xx.h => spear3xx_evb.h} | 62 ++-
> > include/configs/{spear6xx.h => spear6xx_evb.h} | 20 +-
> > include/linux/mtd/fsmc_nand.h | 101 ++++
> > .../spr_smi.h => include/linux/mtd/st_smi.h | 10 +-
> > include/netdev.h | 2 +-
> > lib/Makefile | 2 +-
> > 56 files changed, 3229 insertions(+), 769 deletions(-)
> > create mode 100644 arch/arm/cpu/arm926ejs/spear/cpu.c
> > create mode 100644 arch/arm/cpu/arm926ejs/spear/spear600.c
> > create mode 100644 arch/arm/cpu/arm926ejs/spear/spl.c
> > create mode 100644 arch/arm/cpu/arm926ejs/spear/spl_boot.c
> > create mode 100644
> >
> > arch/arm/cpu/arm926ejs/spear/spr600_mt47h128m8_3_266_cl5_async.c create
> > mode 100644
> > arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_333_cl5_psync.c create
> > mode 100644
> > arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_37e_166_cl4_sync.c create
> > mode 100644
> > arch/arm/cpu/arm926ejs/spear/spr600_mt47h64m16_3_333_cl5_psync.c create
> > mode 100644 arch/arm/cpu/arm926ejs/spear/start.S
> >
> > create mode 100644 arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
> > create mode 100644 arch/arm/include/asm/arch-spear/clk.h
> > create mode 100644 arch/arm/include/asm/arch-spear/gpio.h
> > delete mode 100644 arch/arm/include/asm/arch-spear/spr_nand.h
> > create mode 100644 arch/arm/include/asm/arch-spear/spr_ssp.h
> > delete mode 100644 arch/arm/include/asm/arch-spear/spr_xloader_table.h
> > delete mode 100644 board/spear/spear300/config.mk
> > delete mode 100644 board/spear/spear310/config.mk
> > delete mode 100644 board/spear/spear320/config.mk
> > delete mode 100644 board/spear/spear600/config.mk
> > create mode 100644 drivers/gpio/spear_gpio.c
> > create mode 100644 drivers/mtd/nand/fsmc_nand.c
> > delete mode 100644 drivers/mtd/nand/spr_nand.c
> > rename drivers/mtd/{spr_smi.c => st_smi.c} (62%)
> > rename include/configs/{spear3xx.h => spear3xx_evb.h} (72%)
> > rename include/configs/{spear6xx.h => spear6xx_evb.h} (74%)
> > create mode 100644 include/linux/mtd/fsmc_nand.h
> > rename arch/arm/include/asm/arch-spear/spr_smi.h =>
> >
> > include/linux/mtd/st_smi.h (95%)
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > http://lists.denx.de/mailman/listinfo/u-boot
--
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
More information about the U-Boot
mailing list