[U-Boot] [PATCH v3] arm : Atmel : add at91sam9x5ek board support
Andreas Bießmann
andreas.devel at googlemail.com
Wed Jul 4 01:32:43 CEST 2012
Dear Bo Shen,
sorry, a few objections left.
Wolfgang requested for last pull for -rc1 these days and I don't know if
Albert is willing to pull the 6 other at91 related patches in for -rc1
or even 2012.07. So I think we don't need to hurry here. This board will
make its way to mainline at least for 2012.10.
On 03.07.12 04:06, Bo Shen wrote:
> Add at91sam9x5ek board support, this board support the following SoCs
> AT91SAM9G15, AT91SAM9G25, AT91SAM9G35, AT91SAM9X25, AT91SAM9X35
>
> Using at91sam9x5ek_nandflash to configure for the board
> Now only supports NAND with software ECC boot up
>
> Signed-off-by: Bo Shen <voice.shen at atmel.com>
> ---
> This patch is based on git://git.denx.de/u-boot-atmel.git
>
> Changed since v1 and v2
> Modify the code according to Andreas's suggestion
> ---
> MAINTAINERS | 3 +
> arch/arm/cpu/arm926ejs/at91/Makefile | 1 +
> arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 232 +++++++++++++++
> arch/arm/cpu/arm926ejs/at91/clock.c | 12 +-
> arch/arm/include/asm/arch-at91/at91sam9_matrix.h | 2 +
> arch/arm/include/asm/arch-at91/at91sam9x5.h | 170 +++++++++++
> arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h | 91 ++++++
> arch/arm/include/asm/arch-at91/hardware.h | 2 +
> board/atmel/at91sam9x5ek/Makefile | 52 ++++
> board/atmel/at91sam9x5ek/at91sam9x5ek.c | 299 ++++++++++++++++++++
> board/atmel/at91sam9x5ek/config.mk | 1 +
> boards.cfg | 1 +
> drivers/net/macb.c | 4 +-
> include/configs/at91sam9x5ek.h | 184 ++++++++++++
> 14 files changed, 1050 insertions(+), 4 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
> create mode 100644 arch/arm/include/asm/arch-at91/at91sam9x5.h
> create mode 100644 arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h
> create mode 100644 board/atmel/at91sam9x5ek/Makefile
> create mode 100644 board/atmel/at91sam9x5ek/at91sam9x5ek.c
> create mode 100644 board/atmel/at91sam9x5ek/config.mk
> create mode 100644 include/configs/at91sam9x5ek.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 6438e1c..a2fccbf 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -660,6 +660,9 @@ Sedji Gaouaou<sedji.gaouaou at atmel.com>
> at91sam9g10ek ARM926EJS (AT91SAM9G10 SoC)
> at91sam9m10g45ek ARM926EJS (AT91SAM9G45 SoC)
>
> +Bo Shen <voice.shen at atmel.com>
> + at91sam9x5ek ARM926EJS (AT91SAM9G15,G25,G35,X25,X35 SoC)
> +
> Simon Guinot <simon.guinot at sequanux.org>
>
> inetspace_v2 ARM926EJS (Kirkwood SoC)
> diff --git a/arch/arm/cpu/arm926ejs/at91/Makefile b/arch/arm/cpu/arm926ejs/at91/Makefile
> index f333753..346e58f 100644
> --- a/arch/arm/cpu/arm926ejs/at91/Makefile
> +++ b/arch/arm/cpu/arm926ejs/at91/Makefile
> @@ -35,6 +35,7 @@ COBJS-$(CONFIG_AT91SAM9263) += at91sam9263_devices.o
> COBJS-$(CONFIG_AT91SAM9RL) += at91sam9rl_devices.o
> COBJS-$(CONFIG_AT91SAM9M10G45) += at91sam9m10g45_devices.o
> COBJS-$(CONFIG_AT91SAM9G45) += at91sam9m10g45_devices.o
> +COBJS-$(CONFIG_AT91SAM9X5) += at91sam9x5_devices.o
> COBJS-$(CONFIG_AT91_EFLASH) += eflash.o
> COBJS-$(CONFIG_AT91_LED) += led.o
> COBJS-y += clock.o
> diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
> new file mode 100644
> index 0000000..7558ca2
> --- /dev/null
> +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
> @@ -0,0 +1,232 @@
> +/*
> + * Copyright (C) 2012 Atmel Corporation
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <asm/arch/at91_common.h>
> +#include <asm/arch/at91_pmc.h>
> +#include <asm/arch/gpio.h>
> +#include <asm/io.h>
> +
> +unsigned int get_chip_id(void)
> +{
> + /* The 0x40 is the offset of cidr in DBGU */
> + return readl(ATMEL_BASE_DBGU + 0x40) & ~ARCH_ID_VERSION_MASK;
> +}
> +
> +unsigned int get_extension_chip_id(void)
> +{
> + /* The 0x44 is the offset of exid in DBGU */
> + return readl(ATMEL_BASE_DBGU + 0x44);
> +}
> +
> +unsigned int has_emac1()
> +{
> + return cpu_is_at91sam9x25();
> +}
> +
> +unsigned int has_emac0()
> +{
> + return !(cpu_is_at91sam9g15());
> +}
> +
> +unsigned int has_lcdc()
> +{
> + return cpu_is_at91sam9g15() || cpu_is_at91sam9g35()
> + || cpu_is_at91sam9x35();
> +}
> +
> +char *get_cpu_name()
> +{
> + unsigned int extension_id = get_extension_chip_id();
> +
> + if (cpu_is_at91sam9x5()) {
> + switch (extension_id) {
> + case ARCH_EXID_AT91SAM9G15:
> + return CONFIG_SYS_AT91_G15_CPU_NAME;
> + case ARCH_EXID_AT91SAM9G25:
> + return CONFIG_SYS_AT91_G25_CPU_NAME;
> + case ARCH_EXID_AT91SAM9G35:
> + return CONFIG_SYS_AT91_G35_CPU_NAME;
> + case ARCH_EXID_AT91SAM9X25:
> + return CONFIG_SYS_AT91_X25_CPU_NAME;
> + case ARCH_EXID_AT91SAM9X35:
> + return CONFIG_SYS_AT91_X35_CPU_NAME;
> + default:
> + return CONFIG_SYS_AT91_UNKNOWN_CPU;
> + }
> + } else {
> + return CONFIG_SYS_AT91_UNKNOWN_CPU;
> + }
> +}
> +
> +void at91_seriald_hw_init(void)
> +{
> + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> +
> + at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */
> + at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */
> +
> + writel(1 << ATMEL_ID_SYS, &pmc->pcer);
> +}
> +
> +void at91_serial0_hw_init(void)
> +{
> + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> +
> + at91_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD */
> + at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD */
> +
> + writel(1 << ATMEL_ID_USART0, &pmc->pcer);
> +}
> +
> +void at91_serial1_hw_init(void)
> +{
> + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> +
> + at91_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD */
> + at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD */
> +
> + writel(1 << ATMEL_ID_USART1, &pmc->pcer);
> +}
> +
> +void at91_serial2_hw_init(void)
> +{
> + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> +
> + at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD */
> + at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD */
> +
> + writel(1 << ATMEL_ID_USART2, &pmc->pcer);
> +}
> +
> +#ifdef CONFIG_ATMEL_SPI
> +void at91_spi0_hw_init(unsigned long cs_mask)
> +{
> + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_PMC_BASE;
> +
> + at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */
> + at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */
> + at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */
> +
> + /* Enable clock */
> + writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
> +
> + if (cs_mask & (1 << 0))
> + at91_set_a_periph(AT91_PIO_PORTA, 14, 0);
> + if (cs_mask & (1 << 1))
> + at91_set_b_periph(AT91_PIO_PORTA, 7, 0);
> + if (cs_mask & (1 << 2))
> + at91_set_b_periph(AT91_PIO_PORTA, 1, 0);
> + if (cs_mask & (1 << 3))
> + at91_set_b_periph(AT91_PIO_PORTB, 3, 0);
> + if (cs_mask & (1 << 4))
> + at91_set_pio_output(AT91_PIO_PORTA, 14, 0);
> + if (cs_mask & (1 << 5))
> + at91_set_pio_output(AT91_PIO_PORTA, 7, 0);
> + if (cs_mask & (1 << 6))
> + at91_set_pio_output(AT91_PIO_PORTA, 1, 0);
> + if (cs_mask & (1 << 7))
> + at91_set_pio_output(AT91_PIO_PORTB, 3, 0);
> +}
> +
> +void at91_spi1_hw_init(unsigned long cs_mask)
> +{
> + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_PMC_BASE;
> +
> + at91_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */
> + at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */
> + at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */
> +
> + /* Enable clock */
> + writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
> +
> + if (cs_mask & (1 << 0))
> + at91_set_b_periph(AT91_PIO_PORTA, 8, 0);
> + if (cs_mask & (1 << 1))
> + at91_set_b_periph(AT91_PIO_PORTA, 0, 0);
> + if (cs_mask & (1 << 2))
> + at91_set_b_periph(AT91_PIO_PORTA, 31, 0);
> + if (cs_mask & (1 << 3))
> + at91_set_b_periph(AT91_PIO_PORTA, 30, 0);
> + if (cs_mask & (1 << 4))
> + at91_set_pio_output(AT91_PIO_PORTA, 8, 0);
> + if (cs_mask & (1 << 5))
> + at91_set_pio_output(AT91_PIO_PORTA, 0, 0);
> + if (cs_mask & (1 << 6))
> + at91_set_pio_output(AT91_PIO_PORTA, 31, 0);
> + if (cs_mask & (1 << 7))
> + at91_set_pio_output(AT91_PIO_PORTA, 30, 0);
> +}
> +#endif
> +
> +#ifdef CONFIG_MACB
> +void at91_macb_hw_init(void)
> +{
> + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> +
> + if (has_emac0()) {
> + /* Enable EMAC0 clock */
> + writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
> + /* EMAC0 pins setup */
> + at91_set_a_periph(AT91_PIO_PORTB, 4, 0); /* ETXCK */
> + at91_set_a_periph(AT91_PIO_PORTB, 3, 0); /* ERXDV */
> + at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ERX0 */
> + at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* ERX1 */
> + at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ERXER */
> + at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ETXEN */
> + at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ETX0 */
> + at91_set_a_periph(AT91_PIO_PORTB, 10, 0); /* ETX1 */
> + at91_set_a_periph(AT91_PIO_PORTB, 5, 0); /* EMDIO */
> + at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* EMDC */
> + }
> +
> + if (has_emac1()) {
> + /* Enable EMAC1 clock */
> + writel(1 << ATMEL_ID_EMAC1, &pmc->pcer);
> + /* EMAC1 pins setup */
> + at91_set_b_periph(AT91_PIO_PORTC, 29, 0); /* ETXCK */
> + at91_set_b_periph(AT91_PIO_PORTC, 28, 0); /* ECRSDV */
> + at91_set_b_periph(AT91_PIO_PORTC, 20, 0); /* ERXO */
> + at91_set_b_periph(AT91_PIO_PORTC, 21, 0); /* ERX1 */
> + at91_set_b_periph(AT91_PIO_PORTC, 16, 0); /* ERXER */
> + at91_set_b_periph(AT91_PIO_PORTC, 27, 0); /* ETXEN */
> + at91_set_b_periph(AT91_PIO_PORTC, 18, 0); /* ETX0 */
> + at91_set_b_periph(AT91_PIO_PORTC, 19, 0); /* ETX1 */
> + at91_set_b_periph(AT91_PIO_PORTC, 31, 0); /* EMDIO */
> + at91_set_b_periph(AT91_PIO_PORTC, 30, 0); /* EMDC */
> + }
> +
> +#ifndef CONFIG_RMII
> + /* Only emac0 support MII */
> + if (has_emac0()) {
> + at91_set_b_periph(AT91_PIO_PORTB, 16, 0); /* ECRS */
> + at91_set_b_periph(AT91_PIO_PORTB, 17, 0); /* ECOL */
> + at91_set_b_periph(AT91_PIO_PORTB, 13, 0); /* ERX2 */
> + at91_set_b_periph(AT91_PIO_PORTB, 14, 0); /* ERX3 */
> + at91_set_b_periph(AT91_PIO_PORTB, 15, 0); /* ERXCK */
> + at91_set_b_periph(AT91_PIO_PORTB, 11, 0); /* ETX2 */
> + at91_set_b_periph(AT91_PIO_PORTB, 12, 0); /* ETX3 */
> + at91_set_b_periph(AT91_PIO_PORTB, 8, 0); /* ETXER */
> + }
> +#endif
> +}
> +#endif
> diff --git a/arch/arm/cpu/arm926ejs/at91/clock.c b/arch/arm/cpu/arm926ejs/at91/clock.c
> index a7085de..dc5c6c4 100644
> --- a/arch/arm/cpu/arm926ejs/at91/clock.c
> +++ b/arch/arm/cpu/arm926ejs/at91/clock.c
> @@ -154,7 +154,8 @@ int at91_clock_init(unsigned long main_clock)
> * For now, assume this parentage won't change.
> */
> mckr = readl(&pmc->mckr);
> -#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
> +#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \
> + || defined(CONFIG_AT91SAM9X5)
> /* plla divisor by 2 */
> gd->plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12));
> #endif
> @@ -168,7 +169,14 @@ int at91_clock_init(unsigned long main_clock)
> freq / ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 7) : freq;
> if (mckr & AT91_PMC_MCKR_MDIV_MASK)
> freq /= 2; /* processor clock division */
> -#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
> +#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \
> + || defined(CONFIG_AT91SAM9X5)
> + /* mdiv <==> divisor
> + * 0 <==> 1
> + * 1 <==> 2
> + * 2 <==> 4
> + * 3 <==> 3
> + */
> gd->mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ==
> (AT91_PMC_MCKR_MDIV_2 | AT91_PMC_MCKR_MDIV_4)
> ? freq / 3
> diff --git a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h
> index 6d97189..b9a93b0 100644
> --- a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h
> +++ b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h
> @@ -23,6 +23,8 @@
> #include <asm/arch/at91cap9_matrix.h>
> #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
> #include <asm/arch/at91sam9g45_matrix.h>
> +#elif defined(CONFIG_AT91SAM9X5)
> +#include <asm/arch/at91sam9x5_matrix.h>
> #else
> #error "Unsupported AT91SAM9/CAP9 processor"
> #endif
> diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/include/asm/arch-at91/at91sam9x5.h
> new file mode 100644
> index 0000000..0e728c9
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h
> @@ -0,0 +1,170 @@
> +/*
> + * Chip-specific header file for the AT91SAM9x5 family
> + *
> + * Copyright (C) 2012 Atmel Corporation.
> + *
> + * Definitions for the SoC:
> + * AT91SAM9x5
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#ifndef __AT91SAM9X5_H__
> +#define __AT91SAM9X5_H__
> +
> +/*
> + * Peripheral identifiers/interrupts.
> + */
> +#define ATMEL_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
> +#define ATMEL_ID_SYS 1 /* System Controller Interrupt */
> +#define ATMEL_ID_PIOAB 2 /* Parallel I/O Controller A and B */
> +#define ATMEL_ID_PIOCD 3 /* Parallel I/O Controller C and D */
> +#define ATMEL_ID_SMD 4 /* SMD Soft Modem (SMD) */
> +#define ATMEL_ID_USART0 5 /* USART 0 */
> +#define ATMEL_ID_USART1 6 /* USART 1 */
> +#define ATMEL_ID_USART2 7 /* USART 2 */
> +#define ATMEL_ID_TWI0 9 /* Two-Wire Interface 0 */
> +#define ATMEL_ID_TWI1 10 /* Two-Wire Interface 1 */
> +#define ATMEL_ID_TWI2 11 /* Two-Wire Interface 2 */
> +#define ATMEL_ID_HSMCI0 12 /* High Speed Multimedia Card Interface 0 */
> +#define ATMEL_ID_SPI0 13 /* Serial Peripheral Interface 0 */
> +#define ATMEL_ID_SPI1 14 /* Serial Peripheral Interface 1 */
> +#define ATMEL_ID_UART0 15 /* UART 0 */
> +#define ATMEL_ID_UART1 16 /* UART 1 */
> +#define ATMEL_ID_TC01 17 /* Timer Counter 0, 1, 2, 3, 4 and 5 */
> +#define ATMEL_ID_PWM 18 /* Pulse Width Modulation Controller */
> +#define ATMEL_ID_ADC 19 /* ADC Controller */
> +#define ATMEL_ID_DMAC0 20 /* DMA Controller 0 */
> +#define ATMEL_ID_DMAC1 21 /* DMA Controller 1 */
> +#define ATMEL_ID_UHPHS 22 /* USB Host High Speed */
> +#define ATMEL_ID_UDPHS 23 /* USB Device High Speed */
> +#define ATMEL_ID_EMAC0 24 /* Ethernet MAC0 */
> +#define ATMEL_ID_LCDC 25 /* LCD Controller */
> +#define ATMEL_ID_HSMCI1 26 /* High Speed Multimedia Card Interface 1 */
> +#define ATMEL_ID_EMAC1 27 /* Ethernet MAC1 */
> +#define ATMEL_ID_SSC 28 /* Synchronous Serial Controller */
> +#define ATMEL_ID_IRQ 31 /* Advanced Interrupt Controller */
> +
> +/*
> + * User Peripheral physical base addresses.
> + */
> +#define ATMEL_BASE_SPI0 0xf0000000
> +#define ATMEL_BASE_SPI1 0xf0004000
> +#define ATMEL_BASE_HSMCI0 0xf0008000
> +#define ATMEL_BASE_HSMCI1 0xf000c000
> +#define ATMEL_BASE_SSC 0xf0010000
> +#define ATMEL_BASE_CAN0 0xf8000000
> +#define ATMEL_BASE_CAN1 0xf8004000
> +#define ATMEL_BASE_TC0 0xf8008000
> +#define ATMEL_BASE_TC1 0xf8008040
> +#define ATMEL_BASE_TC2 0xf8008080
> +#define ATMEL_BASE_TC3 0xf800c000
> +#define ATMEL_BASE_TC4 0xf800c040
> +#define ATMEL_BASE_TC5 0xf800c080
> +#define ATMEL_BASE_TWI0 0xf8010000
> +#define ATMEL_BASE_TWI1 0xf8014000
> +#define ATMEL_BASE_TWI2 0xf8018000
> +#define ATMEL_BASE_USART0 0xf801c000
> +#define ATMEL_BASE_USART1 0xf8020000
> +#define ATMEL_BASE_USART2 0xf8024000
> +#define ATMEL_BASE_USART3 0xf8028000
> +#define ATMEL_BASE_EMAC0 0xf802c000
> +#define ATMEL_BASE_EMAC1 0xf8030000
> +#define ATMEL_BASE_PWM 0xf8034000
> +#define ATMEL_BASE_LCDC 0xf8038000
> +#define ATMEL_BASE_UDPHS 0xf803c000
> +#define ATMEL_BASE_UART0 0xf8040000
> +#define ATMEL_BASE_UART1 0xf8044000
> +#define ATMEL_BASE_ISI 0xf8048000
> +#define ATMEL_BASE_ADC 0xf804c000
> +#define ATMEL_BASE_SYS 0xffffc000
> +
> +/*
> + * System Peripherals
> + */
> +#define ATMEL_BASE_MATRIX 0xffffde00
> +#define ATMEL_BASE_PMECC 0xffffe000
> +#define ATMEL_BASE_PMERRLOC 0xffffe600
> +#define ATMEL_BASE_DDRSDRC 0xffffe800
> +#define ATMEL_BASE_SMC 0xffffea00
> +#define ATMEL_BASE_DMAC0 0xffffec00
> +#define ATMEL_BASE_DMAC1 0xffffee00
> +#define ATMEL_BASE_AIC 0xfffff000
> +#define ATMEL_BASE_DBGU 0xfffff200
> +#define ATMEL_BASE_PIOA 0xfffff400
> +#define ATMEL_BASE_PIOB 0xfffff600
> +#define ATMEL_BASE_PIOC 0xfffff800
> +#define ATMEL_BASE_PIOD 0xfffffa00
> +#define ATMEL_BASE_PMC 0xfffffc00
> +#define ATMEL_BASE_RSTC 0xfffffe00
> +#define ATMEL_BASE_SHDWC 0xfffffe10
> +#define ATMEL_BASE_PIT 0xfffffe30
> +#define ATMEL_BASE_WDT 0xfffffe40
> +#define ATMEL_BASE_GPBR 0xfffffe60
> +#define ATMEL_BASE_RTC 0xfffffeb0
> +
> +/*
> + * Internal Memory.
> + */
> +#define ATMEL_BASE_ROM 0x00100000 /* Internal ROM base address */
> +#define ATMEL_BASE_SRAM 0x00300000 /* Internal SRAM base address */
> +#define ATMEL_BASE_SMD 0x00400000 /* SMD Controller */
> +#define ATMEL_BASE_UDPHS_FIFO 0x00500000 /* USB Device HS controller */
> +#define ATMEL_BASE_OHCI 0x00600000 /* USB Host controller (OHCI) */
> +#define ATMEL_BASE_EHCI 0x00700000 /* USB Host controller (EHCI) */
> +
> +/* 9x5 series chip id definitions */
> +#define ARCH_ID_AT91SAM9X5 0x819a05a0
> +#define ARCH_ID_VERSION_MASK 0x1f
> +#define ARCH_EXID_AT91SAM9G15 0x00000000
> +#define ARCH_EXID_AT91SAM9G35 0x00000001
> +#define ARCH_EXID_AT91SAM9X35 0x00000002
> +#define ARCH_EXID_AT91SAM9G25 0x00000003
> +#define ARCH_EXID_AT91SAM9X25 0x00000004
> +
> +#define cpu_is_at91sam9x5() (get_chip_id() == ARCH_ID_AT91SAM9X5)
> +#define cpu_is_at91sam9g15() (cpu_is_at91sam9x5() && \
> + (get_extension_chip_id() == ARCH_EXID_AT91SAM9G15))
> +#define cpu_is_at91sam9g25() (cpu_is_at91sam9x5() && \
> + (get_extension_chip_id() == ARCH_EXID_AT91SAM9G25))
> +#define cpu_is_at91sam9g35() (cpu_is_at91sam9x5() && \
> + (get_extension_chip_id() == ARCH_EXID_AT91SAM9G35))
> +#define cpu_is_at91sam9x25() (cpu_is_at91sam9x5() && \
> + (get_extension_chip_id() == ARCH_EXID_AT91SAM9X25))
> +#define cpu_is_at91sam9x35() (cpu_is_at91sam9x5() && \
> + (get_extension_chip_id() == ARCH_EXID_AT91SAM9X35))
> +
> +/*
> + * Cpu Name
> + */
> +#define CONFIG_SYS_AT91_G15_CPU_NAME "AT91SAM9G15"
> +#define CONFIG_SYS_AT91_G25_CPU_NAME "AT91SAM9G25"
> +#define CONFIG_SYS_AT91_G35_CPU_NAME "AT91SAM9G35"
> +#define CONFIG_SYS_AT91_X25_CPU_NAME "AT91SAM9X25"
> +#define CONFIG_SYS_AT91_X35_CPU_NAME "AT91SAM9X35"
> +#define CONFIG_SYS_AT91_UNKNOWN_CPU "Unknown CPU type"
> +#define ATMEL_CPU_NAME get_cpu_name()
> +
> +/*
> + * Other misc defines
> + */
> +#define ATMEL_PIO_PORTS 4
> +#define CPU_HAS_PIO3
> +#define PIO_SCDR_DIV (0x3fff << 0) /* Slow Clock Divider Mask */
> +
> +/*
> + * at91sam9x5 specific prototypes
> + */
> +#ifndef __ASSEMBLY__
> +unsigned int get_chip_id(void);
> +unsigned int get_extension_chip_id(void);
> +unsigned int has_emac1(void);
> +unsigned int has_emac0(void);
> +unsigned int has_lcdc(void);
> +char *get_cpu_name(void);
> +#endif
> +
> +#endif
> diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h
> new file mode 100644
> index 0000000..d6ce6fa
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h
> @@ -0,0 +1,91 @@
> +/*
> + * Matrix-centric header file for the AT91SAM9X5 family
> + *
> + * Copyright (C) 2012 Atmel Corporation.
> + *
> + * Memory Controllers (MATRIX, EBI) - System peripherals registers.
> + * Based on AT91SAM9X5 preliminary datasheet.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#ifndef __AT91SAM9X5_MATRIX_H__
> +#define __AT91SAM9X5_MATRIX_H__
> +
> +#ifndef __ASSEMBLY__
> +
> +struct at91_matrix {
> + u32 mcfg[16];
> + u32 scfg[16];
> + u32 pras[16][2];
> + u32 mrcr; /* 0x100 Master Remap Control */
> + u32 filler[7];
> + u32 ebicsa;
> + u32 filler4[47];
> + u32 wpmr;
> + u32 wpsr;
> +};
> +
> +#endif /* __ASSEMBLY__ */
> +
> +#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
> +#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
> +#define AT91_MATRIX_ULBT_FOUR (2 << 0)
> +#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
> +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
> +#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0)
> +#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0)
> +#define AT91_MATRIX_ULBT_128 (7 << 0)
> +
> +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
> +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
> +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
> +#define AT91_MATRIX_FIXED_DEFMSTR_SHIFT 18
> +
> +#define AT91_MATRIX_M0PR_SHIFT 0
> +#define AT91_MATRIX_M1PR_SHIFT 4
> +#define AT91_MATRIX_M2PR_SHIFT 8
> +#define AT91_MATRIX_M3PR_SHIFT 12
> +#define AT91_MATRIX_M4PR_SHIFT 16
> +#define AT91_MATRIX_M5PR_SHIFT 20
> +#define AT91_MATRIX_M6PR_SHIFT 24
> +#define AT91_MATRIX_M7PR_SHIFT 28
> +
> +#define AT91_MATRIX_M8PR_SHIFT 0 /* register B */
> +#define AT91_MATRIX_M9PR_SHIFT 4 /* register B */
> +#define AT91_MATRIX_M10PR_SHIFT 8 /* register B */
> +#define AT91_MATRIX_M11PR_SHIFT 12 /* register B */
> +
> +#define AT91_MATRIX_RCB0 (1 << 0)
> +#define AT91_MATRIX_RCB1 (1 << 1)
> +#define AT91_MATRIX_RCB2 (1 << 2)
> +#define AT91_MATRIX_RCB3 (1 << 3)
> +#define AT91_MATRIX_RCB4 (1 << 4)
> +#define AT91_MATRIX_RCB5 (1 << 5)
> +#define AT91_MATRIX_RCB6 (1 << 6)
> +#define AT91_MATRIX_RCB7 (1 << 7)
> +#define AT91_MATRIX_RCB8 (1 << 8)
> +#define AT91_MATRIX_RCB9 (1 << 9)
> +#define AT91_MATRIX_RCB10 (1 << 10)
> +
> +#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
> +#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
> +#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
> +#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
> +#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
> +#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
> +#define AT91_MATRIX_EBI_DBPD_ON (0 << 9)
> +#define AT91_MATRIX_EBI_DBPD_OFF (1 << 9)
> +#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
> +#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
> +#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17)
> +#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17)
> +#define AT91_MATRIX_NFD0_ON_D0 (0 << 24)
> +#define AT91_MATRIX_NFD0_ON_D16 (1 << 24)
> +#define AT91_MATRIX_MP_OFF (0 << 25)
> +#define AT91_MATRIX_MP_ON (1 << 25)
> +
> +#endif
> diff --git a/arch/arm/include/asm/arch-at91/hardware.h b/arch/arm/include/asm/arch-at91/hardware.h
> index 85c2889..4c4ee70 100644
> --- a/arch/arm/include/asm/arch-at91/hardware.h
> +++ b/arch/arm/include/asm/arch-at91/hardware.h
> @@ -37,6 +37,8 @@
> # include <asm/arch/at91sam9rl.h>
> #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
> # include <asm/arch/at91sam9g45.h>
> +#elif defined(CONFIG_AT91SAM9X5)
> +# include <asm/arch/at91sam9x5.h>
> #elif defined(CONFIG_AT91CAP9)
> # include <asm/arch/at91cap9.h>
> #elif defined(CONFIG_AT91X40)
> diff --git a/board/atmel/at91sam9x5ek/Makefile b/board/atmel/at91sam9x5ek/Makefile
> new file mode 100644
> index 0000000..458d9a0
> --- /dev/null
> +++ b/board/atmel/at91sam9x5ek/Makefile
> @@ -0,0 +1,52 @@
> +#
> +# (C) Copyright 2003-2008
> +# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> +#
> +# (C) Copyright 2008
> +# Stelian Pop <stelian at popies.net>
> +# Lead Tech Design <www.leadtechdesign.com>
> +#
> +# (C) Copyright 2012
> +# Bo Shen <voice.shen at atmel.com>
> +# Atmel corporation <www.atmel.com>
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +
> +include $(TOPDIR)/config.mk
> +
> +LIB = $(obj)lib$(BOARD).o
> +
> +COBJS-y += at91sam9x5ek.o
> +
> +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
> +OBJS := $(addprefix $(obj),$(COBJS-y))
> +SOBJS := $(addprefix $(obj),$(SOBJS))
> +
> +$(LIB): $(obj).depend $(OBJS) $(SOBJS)
> + $(call cmd_link_o_target, $(OBJS) $(SOBJS))
> +
> +#########################################################################
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> +
> +#########################################################################
> diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
> new file mode 100644
> index 0000000..ef84941
> --- /dev/null
> +++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
> @@ -0,0 +1,299 @@
> +/*
> + * Copyright (C) 2012 Atmel Corporation
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <asm/arch/at91sam9x5_matrix.h>
> +#include <asm/arch/at91sam9_smc.h>
> +#include <asm/arch/at91_common.h>
> +#include <asm/arch/at91_pmc.h>
> +#include <asm/arch/at91_rstc.h>
> +#include <asm/arch/gpio.h>
> +#include <asm/arch/clk.h>
> +#include <lcd.h>
> +#include <atmel_hlcdc.h>
> +#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
> +#include <net.h>
> +#endif
> +#include <netdev.h>
> +#ifdef CONFIG_LCD_INFO
> +#include <nand.h>
> +#include <version.h>
> +#endif
> +#ifdef CONFIG_ATMEL_SPI
> +#include <spi.h>
> +#endif
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/* ------------------------------------------------------------------------- */
> +/*
> + * Miscelaneous platform dependent initialisations
> + */
> +#ifdef CONFIG_CMD_NAND
> +static void at91sam9x5ek_nand_hw_init(void)
> +{
> + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
> + struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
> + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> + unsigned long csa;
> +
> + /* Enable CS3 */
> + csa = readl(&matrix->ebicsa);
> + csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA;
> + writel(csa, &matrix->ebicsa);
> +
> + /* Configure SMC CS3 for NAND/SmartMedia */
> + writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) |
> + AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
> + &smc->cs[3].setup);
> + writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(4) |
> + AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(4),
> + &smc->cs[3].pulse);
> + writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7),
> + &smc->cs[3].cycle);
> + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
> + AT91_SMC_MODE_EXNW_DISABLE |
> +#ifdef CONFIG_SYS_NAND_DBW_16
> + AT91_SMC_MODE_DBW_16 |
> +#else /* CONFIG_SYS_NAND_DBW_8 */
> + AT91_SMC_MODE_DBW_8 |
> +#endif
> + AT91_SMC_MODE_TDF_CYCLE(3),
> + &smc->cs[3].mode);
> +
> + writel(1 << ATMEL_ID_PIOCD, &pmc->pcer);
> +
> + /* Configure RDY/BSY */
> + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
> + /* Enable NandFlash */
> + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
> +
> + at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */
> + at91_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */
> + at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* NAND ALE */
> + at91_set_a_periph(AT91_PIO_PORTD, 3, 1); /* NAND CLE */
> + at91_set_a_periph(AT91_PIO_PORTD, 6, 1);
> + at91_set_a_periph(AT91_PIO_PORTD, 7, 1);
> + at91_set_a_periph(AT91_PIO_PORTD, 8, 1);
> + at91_set_a_periph(AT91_PIO_PORTD, 9, 1);
> + at91_set_a_periph(AT91_PIO_PORTD, 10, 1);
> + at91_set_a_periph(AT91_PIO_PORTD, 11, 1);
> + at91_set_a_periph(AT91_PIO_PORTD, 12, 1);
> + at91_set_a_periph(AT91_PIO_PORTD, 13, 1);
> +}
> +#endif
> +
> +#ifdef CONFIG_RESET_PHY_R
> +void reset_phy(void)
> +{
> +}
> +#endif
You removed the CONFIG_RESET_PHY_R so why don't remove this empty unused
function here?
> +
> +int board_eth_init(bd_t *bis)
> +{
> + int rc = 0;
> +
> +#ifdef CONFIG_MACB
> + if (has_emac0())
> + rc = macb_eth_initialize(0,
> + (void *)ATMEL_BASE_EMAC0, 0x00);
> + if (has_emac1())
> + rc = macb_eth_initialize(1,
> + (void *)ATMEL_BASE_EMAC1, 0x00);
> +#endif
> + return rc;
> +}
> +
> +#ifdef CONFIG_LCD
> +vidinfo_t panel_info = {
> + .vl_col = 800,
> + .vl_row = 480,
> + .vl_clk = 24000000,
> + .vl_sync = LCDC_LCDCFG5_HSPOL | LCDC_LCDCFG5_VSPOL,
> + .vl_bpix = LCD_BPP,
> + .vl_tft = 1,
> + .vl_clk_pol = 1,
> + .vl_hsync_len = 128,
> + .vl_left_margin = 64,
> + .vl_right_margin = 64,
> + .vl_vsync_len = 2,
> + .vl_upper_margin = 22,
> + .vl_lower_margin = 21,
> + .mmio = ATMEL_BASE_LCDC,
> +};
> +
> +void lcd_enable(void)
> +{
> + if (has_lcdc())
> + at91_set_a_periph(AT91_PIO_PORTC, 29, 1); /* power up */
> +}
> +
> +void lcd_disable(void)
> +{
> + if (has_lcdc())
> + at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* power down */
> +}
> +
> +static void at91sam9x5ek_lcd_hw_init(void)
> +{
> + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> +
> + if (has_lcdc()) {
> + at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDPWM */
> + at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDVSYNC */
> + at91_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDHSYNC */
> + at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDISP */
> + at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */
> + at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDPCK */
> +
> + at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */
> + at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */
> + at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */
> + at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */
> + at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */
> + at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */
> + at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */
> + at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */
> + at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */
> + at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */
> + at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */
> + at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */
> + at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */
> + at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */
> + at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */
> + at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */
> + at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */
> + at91_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */
> + at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */
> + at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */
> + at91_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */
> + at91_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */
> + at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */
> + at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */
> +
> + writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
> + }
> +}
> +
> +#ifdef CONFIG_LCD_INFO
> +void lcd_show_board_info(void)
> +{
> + ulong dram_size, nand_size;
> + int i;
> + char temp[32];
> +
> + if (has_lcdc()) {
> + lcd_printf("%s\n", U_BOOT_VERSION);
> + lcd_printf("(C) 2012 ATMEL Corp\n");
> + lcd_printf("at91support at atmel.com\n");
> + lcd_printf("%s CPU at %s MHz\n",
> + get_cpu_name(),
> + strmhz(temp, get_cpu_clk_rate()));
> +
> + dram_size = 0;
> + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
> + dram_size += gd->bd->bi_dram[i].size;
> + nand_size = 0;
> + for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
> + nand_size += nand_info[i].size;
> + lcd_printf(" %ld MB SDRAM, %ld MB NAND\n",
> + dram_size >> 20,
> + nand_size >> 20);
> + }
> +}
> +#endif /* CONFIG_LCD_INFO */
> +#endif /* CONFIG_LCD */
> +
> +/* SPI chip select control */
> +#ifdef CONFIG_ATMEL_SPI
> +int spi_cs_is_valid(unsigned int bus, unsigned int cs)
> +{
> + return bus == 0 && cs < 2;
> +}
> +
> +void spi_cs_activate(struct spi_slave *slave)
> +{
> + switch (slave->cs) {
> + case 1:
> + at91_set_pio_output(AT91_PIO_PORTA, 7, 0);
> + break;
> + case 0:
> + default:
> + at91_set_pio_output(AT91_PIO_PORTA, 14, 0);
> + break;
> + }
> +}
> +
> +void spi_cs_deactivate(struct spi_slave *slave)
> +{
> + switch (slave->cs) {
> + case 1:
> + at91_set_pio_output(AT91_PIO_PORTA, 7, 1);
> + break;
> + case 0:
> + default:
> + at91_set_pio_output(AT91_PIO_PORTA, 14, 1);
> + break;
> + }
> +}
> +#endif /* CONFIG_ATMEL_SPI */
> +
> +int board_early_init_f(void)
> +{
> + at91_seriald_hw_init();
> + return 0;
> +}
> +
> +int board_init(void)
> +{
> + /* arch number of AT91SAM9X5EK-Board */
> + gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9X5EK;
> +
> + /* adress of boot parameters */
> + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
> +
> +#ifdef CONFIG_CMD_NAND
> + at91sam9x5ek_nand_hw_init();
> +#endif
> +
> +#ifdef CONFIG_ATMEL_SPI
> + at91_spi0_hw_init(1 << 0);
> + at91_spi0_hw_init(1 << 4);
> +#endif
> +
> +#ifdef CONFIG_MACB
> + at91_macb_hw_init();
> +#endif
> +
> +#ifdef CONFIG_LCD
> + at91sam9x5ek_lcd_hw_init();
> +#endif
> + return 0;
> +}
> +
> +int dram_init(void)
> +{
> + gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE,
> + CONFIG_SYS_SDRAM_SIZE);
> + return 0;
> +}
> diff --git a/board/atmel/at91sam9x5ek/config.mk b/board/atmel/at91sam9x5ek/config.mk
> new file mode 100644
> index 0000000..6589a12
> --- /dev/null
> +++ b/board/atmel/at91sam9x5ek/config.mk
> @@ -0,0 +1 @@
> +CONFIG_SYS_TEXT_BASE = 0x26f00000
> diff --git a/boards.cfg b/boards.cfg
> index 9205070..c9bd1b3 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -89,6 +89,7 @@ at91sam9g20ek_nandflash arm arm926ejs at91sam9260ek atmel
> at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel at91 at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_NANDFLASH
> at91sam9rlek_dataflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH
> at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH
> +at91sam9x5ek_nandflash arm arm926ejs at91sam9x5ek atmel at91 at91sam9x5ek:AT91SAM9X5,SYS_USE_NANDFLASH
> at91sam9xeek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS0
> at91sam9xeek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS1
> at91sam9xeek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_NANDFLASH
> diff --git a/drivers/net/macb.c b/drivers/net/macb.c
> index 4578467..8f55cdc 100644
> --- a/drivers/net/macb.c
> +++ b/drivers/net/macb.c
> @@ -471,7 +471,7 @@ static int macb_init(struct eth_device *netdev, bd_t *bd)
> #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
> defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
> defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
> - defined(CONFIG_AT91SAM9XE)
> + defined(CONFIG_AT91SAM9XE) || defined(CONFIG_AT91SAM9X5)
> macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
> #else
> macb_writel(macb, USRIO, 0);
> @@ -480,7 +480,7 @@ static int macb_init(struct eth_device *netdev, bd_t *bd)
> #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
> defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
> defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
> - defined(CONFIG_AT91SAM9XE)
> + defined(CONFIG_AT91SAM9XE) || defined(CONFIG_AT91SAM9X5)
> macb_writel(macb, USRIO, MACB_BIT(CLKEN));
> #else
> macb_writel(macb, USRIO, MACB_BIT(MII));
> diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
> new file mode 100644
> index 0000000..d8f9b5e
> --- /dev/null
> +++ b/include/configs/at91sam9x5ek.h
> @@ -0,0 +1,184 @@
> +/*
> + * Copyright (C) 2012 Atmel Corporation
> + *
> + * Configuation settings for the AT91SAM9X5EK board.
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef __CONFIG_H__
> +#define __CONFIG_H__
> +
> +#include <asm/hardware.h>
> +
> +/* ARM asynchronous clock */
> +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
> +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
> +#define CONFIG_SYS_HZ 1000
> +
> +#define CONFIG_AT91SAM9X5EK
> +#define CONFIG_AT91FAMILY
> +
> +#define CONFIG_ARCH_CPU_INIT
> +
> +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
> +#define CONFIG_SETUP_MEMORY_TAGS
> +#define CONFIG_INITRD_TAG
> +#define CONFIG_SKIP_LOWLEVEL_INIT
> +#define CONFIG_BOARD_EARLY_INIT_F
> +#define CONFIG_DISPLAY_CPUINFO
> +
> +/* general purpose I/O */
> +#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
> +#define CONFIG_AT91_GPIO
> +
> +/* serial console */
> +#define CONFIG_ATMEL_USART
> +#define CONFIG_USART_BASE ATMEL_BASE_DBGU
> +#define CONFIG_USART_ID ATMEL_ID_SYS
> +
> +/* LCD */
> +#define CONFIG_LCD
> +#define LCD_BPP LCD_COLOR16
> +#define LCD_OUTPUT_BPP 24
> +#define CONFIG_LCD_LOGO
> +#undef LCD_TEST_PATTERN
> +#define CONFIG_LCD_INFO
> +#define CONFIG_LCD_INFO_BELOW_LOGO
> +#define CONFIG_SYS_WHITE_ON_BLACK
> +#define CONFIG_ATMEL_HLCD
> +#define CONFIG_ATMEL_LCD_RGB565
> +#define CONFIG_SYS_CONSOLE_IS_IN_ENV
> +
> +#define CONFIG_BOOTDELAY 3
> +
> +/*
> + * BOOTP options
> + */
> +#define CONFIG_BOOTP_BOOTFILESIZE
> +#define CONFIG_BOOTP_BOOTPATH
> +#define CONFIG_BOOTP_GATEWAY
> +#define CONFIG_BOOTP_HOSTNAME
> +
> +/*
> + * Command line configuration.
> + */
> +#include <config_cmd_default.h>
> +#undef CONFIG_CMD_FPGA
> +#undef CONFIG_CMD_IMI
> +#undef CONFIG_CMD_IMLS
> +#undef CONFIG_CMD_LOADS
> +
> +#define CONFIG_CMD_PING
> +#define CONFIG_CMD_DHCP
> +#define CONFIG_CMD_NAND
> +
> +/* SDRAM */
> +#define CONFIG_NR_DRAM_BANKS 1
> +#define CONFIG_SYS_SDRAM_BASE 0x20000000
> +#define CONFIG_SYS_SDRAM_SIZE 0x08000000 /* 128 megs */
> +
> +#define CONFIG_SYS_INIT_SP_ADDR \
> + (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
> +
> +/* DataFlash */
> +#ifdef CONFIG_ATMEL_SPI
> +#define CONFIG_CMD_SF
> +#define CONFIG_CMD_SPI
> +#define CONFIG_SPI_FLASH
> +#define CONFIG_SPI_FLASH_ATMEL
> +#define CONFIG_SYS_MAX_DATAFLASH_BANKS
> +#endif
> +
> +/* no NOR flash */
> +#define CONFIG_SYS_NO_FLASH
> +
> +/* NAND flash */
> +#ifdef CONFIG_CMD_NAND
> +#define CONFIG_NAND_ATMEL
> +#define CONFIG_SYS_MAX_NAND_DEVICE 1
> +#define CONFIG_SYS_NAND_BASE 0x40000000
> +#define CONFIG_SYS_NAND_DBW_8 1
> +/* our ALE is AD21 */
> +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
> +/* our CLE is AD22 */
> +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
> +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD4
> +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5
> +
> +#define CONFIG_MTD_DEVICE
> +#define CONFIG_CMD_MTDPARTS
> +#define CONFIG_MTD_PARTITIONS
> +#define CONFIG_RBTREE
> +#define CONFIG_LZO
> +#define CONFIG_CMD_UBI
> +#define CONFIG_CMD_UBIFS
> +#endif
> +
> +/* Ethernet */
> +#define CONFIG_MACB
> +#define CONFIG_RMII
> +#define CONFIG_NET_MULTI
CONFIG_NET_MULTI is still defined here but was globally removed in
31a4f1e5b6ee9b6335f0313dce7637cef887f84f, please remove it here.
> +#define CONFIG_NET_RETRY_COUNT 20
> +#define CONFIG_MACB_SEARCH_PHY
> +
> +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
> +
> +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
> +#define CONFIG_SYS_MEMTEST_END 0x26e00000
> +
> +#ifdef CONFIG_SYS_USE_NANDFLASH
> +/* bootstrap + u-boot + env + linux in nandflash */
> +#define CONFIG_ENV_IS_IN_NAND
> +#define CONFIG_ENV_OFFSET 0xc0000
> +#define CONFIG_ENV_OFFSET_REDUND 0x100000
> +#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
> +#define CONFIG_BOOTCOMMAND "nand read " \
> + "0x22000000 0x200000 0x300000; " \
> + "bootm 0x22000000"
> +#endif
> +
> +#define CONFIG_BOOTARGS "mem=128M console=ttyS0,115200 " \
> + "mtdparts=atmel_nand:" \
> + "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
> + "root=/dev/mtdblock1 rw " \
> + "rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"
> +
> +#define CONFIG_BAUDRATE 115200
> +
> +#define CONFIG_SYS_PROMPT "U-Boot> "
> +#define CONFIG_SYS_CBSIZE 256
> +#define CONFIG_SYS_MAXARGS 16
> +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \
> + + 16)
> +#define CONFIG_SYS_LONGHELP
> +#define CONFIG_CMDLINE_EDITING
> +#define CONFIG_AUTO_COMPLETE
> +#define CONFIG_SYS_HUSH_PARSER
> +
> +/*
> + * Size of malloc() pool
> + */
> +#define CONFIG_SYS_MALLOC_LEN (512 * 1024 + 0x1000)
> +
> +#ifdef CONFIG_USE_IRQ
> +#error CONFIG_USE_IRQ not supported
> +#endif
> +
> +#endif
>
Best regards
Andreas Bießmann
More information about the U-Boot
mailing list