[U-Boot] [PATCH u-boot-arm/next 1/2] OMAP3: igep00x0: Add config option to choose flash storage memory
Javier Martinez Canillas
javier at dowhile0.org
Fri Jul 13 21:41:29 CEST 2012
IGEP-based boards can have two different flash memories, a OneNAND or a
NAND device. Add a configuration option for to choose which memory to use.
Signed-off-by: Javier Martinez Canillas <javier at dowhile0.org>
---
board/isee/igep0020/igep0020.h | 4 ++++
board/isee/igep0030/igep0030.h | 4 ++++
boards.cfg | 6 ++++--
include/configs/igep00x0.h | 19 +++++++++++++++++++
4 files changed, 31 insertions(+), 2 deletions(-)
diff --git a/board/isee/igep0020/igep0020.h b/board/isee/igep0020/igep0020.h
index 3d6e15f..3335ecc 100644
--- a/board/isee/igep0020/igep0020.h
+++ b/board/isee/igep0020/igep0020.h
@@ -26,7 +26,11 @@
const omap3_sysinfo sysinfo = {
DDR_STACKED,
"IGEP v2 board",
+#if defined(CONFIG_ENV_IS_IN_ONENAND)
"ONENAND",
+#else
+ "NAND",
+#endif
};
static void setup_net_chip(void);
diff --git a/board/isee/igep0030/igep0030.h b/board/isee/igep0030/igep0030.h
index b7ce5aa..a93339d 100644
--- a/board/isee/igep0030/igep0030.h
+++ b/board/isee/igep0030/igep0030.h
@@ -26,7 +26,11 @@
const omap3_sysinfo sysinfo = {
DDR_STACKED,
"OMAP3 IGEP module",
+#if defined(CONFIG_ENV_IS_IN_ONENAND)
"ONENAND",
+#else
+ "NAND",
+#endif
};
/*
diff --git a/boards.cfg b/boards.cfg
index 9efdc6d..7463896 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -224,8 +224,10 @@ cm_t35 arm armv7 cm_t35 -
omap3_overo arm armv7 overo - omap3
omap3_pandora arm armv7 pandora - omap3
dig297 arm armv7 dig297 comelit omap3
-igep0020 arm armv7 igep0020 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020
-igep0030 arm armv7 igep0030 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030
+igep0020 arm armv7 igep0020 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND
+igep0020_nand arm armv7 igep0020 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND
+igep0030 arm armv7 igep0030 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND
+igep0030_nand arm armv7 igep0030 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND
am3517_evm arm armv7 am3517evm logicpd omap3
mt_ventoux arm armv7 mt_ventoux teejet omap3
omap3_zoom1 arm armv7 zoom1 logicpd omap3
diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h
index a0a23a7..d8e87c3 100644
--- a/include/configs/igep00x0.h
+++ b/include/configs/igep00x0.h
@@ -105,7 +105,12 @@
#define CONFIG_CMD_FAT /* FAT support */
#define CONFIG_CMD_I2C /* I2C serial bus support */
#define CONFIG_CMD_MMC /* MMC support */
+#ifdef CONFIG_BOOT_ONENAND
#define CONFIG_CMD_ONENAND /* ONENAND support */
+#endif
+#ifdef CONFIG_BOOT_NAND
+#define CONFIG_CMD_NAND
+#endif
#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PING
@@ -244,6 +249,7 @@
* FLASH and environment organization
*/
+#ifdef CONFIG_BOOT_ONENAND
#define PISMO1_ONEN_SIZE GPMC_SIZE_128M /* Configure the PISMO */
#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
@@ -253,6 +259,19 @@
#define CONFIG_ENV_IS_IN_ONENAND 1
#define CONFIG_ENV_SIZE (512 << 10) /* Total Size Environment */
#define CONFIG_ENV_ADDR ONENAND_ENV_OFFSET
+#endif
+
+#ifdef CONFIG_BOOT_NAND
+#define PISMO1_NAND_SIZE GPMC_SIZE_128M /* Configure the PISMO */
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_SYS_NAND_BASE NAND_BASE
+#define GPMC_NAND_ECC_LP_x16_LAYOUT 1
+#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
+#define CONFIG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_SIZE (512 << 10) /* Total Size Environment */
+#define CONFIG_ENV_ADDR NAND_ENV_OFFSET
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#endif
/*
* Size of malloc() pool
--
1.7.7.6
More information about the U-Boot
mailing list