[U-Boot] usb_test_unit_ready called every block read - performance

[Jim Shimer]

Hi Marek,

Here's a patch.

-Jim

On Mon, Jul 30, 2012 at 7:41 PM, Marek Vasut <marek.vasut at gmail.com> wrote:

> Dear Jim Shimer,
>
> > Marek,
> >
> > I don't have a USB 1.x device to do that regression. Taking the call to
> > usb_test_unit_ready out of the block reads/writes and leaving it only in
> > get info really speed up ext2load.  With the recent cache changes on top
> of
> > this and the 5ms delay, we're getting fairly close to the Linux USB
> > transfer times and are happy with the results.  Can you look into
> > integrating this?
>
> Can you send a patch that'll yank it out? I should be able to test it in a
> bit.
>
> > -Jim
> >
> > On Mon, Jul 30, 2012 at 6:54 PM, Marek Vasut <marex at denx.de> wrote:
> > > Dear Jim Shimer,
> > >
> > > > While tuning ext2load, we found that usb_test_unit_ready was being
> > > > called every block read.  We compared the usb block storage to the
> > > > scsi block storage cmd_scsi.c, and found that the scsi device was
> only
> > > > calling its scsi_setup_test_unit_ready() during scsi_can.  It appears
> > > > that usb_test_unit_ready() really only needs to be called once during
> > > > usb_stor_scan(), via usb_stor_get_info().   Is there a particular
> > > > reason usb_test_unit_ready is called for every block read, or do you
> > > > think its
> > >
> > > ok
> > >
> > > > to only call during usb_stor_scan()?  We're finding this speeds up
> > >
> > > ext2load
> > >
> > > > quite a bit.
> > >
> > > Could it be because the USB is actually quite slower than SCSI and the
> > > device
> > > might get congested? It seems the code was there ever since (I can't
> seem
> > > to
> > > find the origin of it) and we might actually want to try if this
> doesn't
> > > break
> > > some usb 1.x things.
> > >
> > > > Regards,
> > > > Jim
> > >
> > > Best regards,
> > > Marek Vasut
>
> Best regards,
> Marek Vasut
>



-- 
*James H Shimer*
Motorola Mobility T3-12-HH72
900 Chelmsford Street
Lowell MA 08151
978-614-3550
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-Optimize-USB-load-ext2load-by-removing-uneeded-test-.patch
Type: application/octet-stream
Size: 1523 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20120730/a13564cc/attachment.obj>