[U-Boot] [PATCH 00/10 V5] EXYNOS5: Support for Exynos5250 Rev 1.0
Minkyu Kang
promsoft at gmail.com
Tue Jul 3 14:40:55 CEST 2012
On 2 July 2012 20:36, Rajeshwari Shinde <rajeshwari.s at samsung.com> wrote:
> This patch set adds support for Exynos5250 Rev 1.0.
> Exynos5250 Rev 1.0 supports DDR3 Memory configuration and
> support for LPDDR2 is removed.
> Exynos5250 Rev 1.0 supports DWMMC controller and does not support SDHCI
> controller.
> After DWMMC driver is added to Mainline support for generic S5P MMC driver
> will be removed.
>
> Due to Support of SDHCI controller currently still there for
> EXYNOS5 you can see the following error on boot.
>
> mmc_reset: timeout error
> mmc_change_clock: timeout error
> mmc_send_cmd: waiting for status update
> MMC init failed
>
> Changes in V2:
> - Included Paramateric structure with in #ifndef __ASSEMBLY__.
> Chnages in V3:
> - Incorporated the review comments.
> - Added support for BPLL.
> - Corrected the gpio pinmux settings.
> Changes in V4:
> - Fixed Warning message.
> Changes in V5:
> - Corrected indentation error.
>
> Rajeshwari Shinde (10):
> ARCH: SPL: Add parametric board initializer
> SMDK5250: SPL: Define parametric board initializer
> SMDK5250: Add smdk5250-uboot-spl.lds
> EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev
> 1.0
> EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0
> Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0
> EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0
> EXYNOS5: CLOCK: Add BPLL support
> EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0
> SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0
>
> arch/arm/cpu/armv7/exynos/clock.c | 28 +-
> arch/arm/cpu/armv7/exynos/pinmux.c | 22 +-
> arch/arm/include/asm/arch-exynos/clk.h | 1 +
> arch/arm/include/asm/arch-exynos/clock.h | 237 +++++----
> arch/arm/include/asm/arch-exynos/dmc.h | 65 +++
> arch/arm/include/asm/arch-exynos/gpio.h | 7 +-
> arch/arm/include/asm/arch-exynos/spl.h | 97 ++++
> board/samsung/smdk5250/Makefile | 3 +-
> board/samsung/smdk5250/clock_init.c | 714 +++++++++++++++++++----
> board/samsung/smdk5250/clock_init.h | 149 +++++
> board/samsung/smdk5250/dmc_common.c | 199 +++++++
> board/samsung/smdk5250/dmc_init.c | 462 ---------------
> board/samsung/smdk5250/dmc_init_ddr3.c | 228 ++++++++
> board/samsung/smdk5250/setup.h | 762 +++++++++++++++----------
> board/samsung/smdk5250/smdk5250-uboot-spl.lds | 66 +++
> board/samsung/smdk5250/smdk5250.c | 6 +-
> board/samsung/smdk5250/smdk5250_spl.c | 68 +++
> include/configs/smdk5250.h | 7 +-
> 18 files changed, 2099 insertions(+), 1022 deletions(-)
> create mode 100644 arch/arm/include/asm/arch-exynos/spl.h
> create mode 100644 board/samsung/smdk5250/clock_init.h
> create mode 100644 board/samsung/smdk5250/dmc_common.c
> delete mode 100644 board/samsung/smdk5250/dmc_init.c
> create mode 100644 board/samsung/smdk5250/dmc_init_ddr3.c
> create mode 100644 board/samsung/smdk5250/smdk5250-uboot-spl.lds
> create mode 100644 board/samsung/smdk5250/smdk5250_spl.c
>
Please fix compiler errors.
ext2fs.c: In function 'ext2fs_read_file':
ext2fs.c:443: warning: 'blocknxt' may be used uninitialized in this function
dmc_init_ddr3.c: In function 'ddr3_mem_ctrl_init':
dmc_init_ddr3.c:196: warning: implicit declaration of function 'sdelay'
dmc_common.c: In function 'dmc_config_zq':
dmc_common.c:72: warning: implicit declaration of function 'sdelay'
In file included from tzpc_init.c:27:
setup.h:554: warning: 'struct exynos5_phy_control' declared inside
parameter list
setup.h:554: warning: its scope is only this definition or
declaration, which is probably not what you want
setup.h:562: warning: 'struct exynos5_dmc' declared inside parameter list
setup.h:570: warning: 'struct exynos5_dmc' declared inside parameter list
setup.h:578: warning: 'struct exynos5_dmc' declared inside parameter list
In file included from tzpc_init.c:27:
setup.h:588: warning: 'enum ddr_mode' declared inside parameter list
setup.h:588: warning: 'struct exynos5_dmc' declared inside parameter list
In file included from tzpc_init.c:27:
setup.h:554: warning: 'struct exynos5_phy_control' declared inside
parameter list
setup.h:554: warning: its scope is only this definition or
declaration, which is probably not what you want
setup.h:562: warning: 'struct exynos5_dmc' declared inside parameter list
setup.h:570: warning: 'struct exynos5_dmc' declared inside parameter list
setup.h:578: warning: 'struct exynos5_dmc' declared inside parameter list
In file included from tzpc_init.c:27:
setup.h:588: warning: 'enum ddr_mode' declared inside parameter list
setup.h:588: warning: 'struct exynos5_dmc' declared inside parameter list
dmc_init_ddr3.c: In function 'ddr3_mem_ctrl_init':
dmc_init_ddr3.c:196: warning: implicit declaration of function 'sdelay'
dmc_common.c: In function 'dmc_config_zq':
dmc_common.c:72: warning: implicit declaration of function 'sdelay'
Thanks.
Minkyu Kang.
--
from. prom.
www.promsoft.net
More information about the U-Boot
mailing list