[U-Boot] I apply to maintain S3C6400 board for u-boot

[Zhong Hongbo]

Hi Wolfgang Denk,

On 07/20/2012 03:11 PM, Wolfgang Denk wrote:
> Dear Hongbo,
> 
> In message <5007FBBF.7040606 at gmail.com> you wrote:
>>
>> I get some information from MAINTAINERS file. I know The board of
>> S3C6400 is a orphaned board. Also I have not the board, But I have a
>> S3C6410 board in my hand. In my development u-boot for my board, I know
>> the S3C6410 replace the s3c6400, and they use the same arm1176
>> architecture. So I think that I can help do a little thing for S3C6400's
>> u-boot.
> 
> Thanks for volunteering.  If you want to take over responsbility for a
> board (even an orphaned one) then please send a patch that adds you to
> the MAINTAINERS file.

OK
> 
>> In the recently, I send the patch serial of S3C6400. This patch
>> is very important for S3C64XX. It clear the old method to operate the
>> I/O port, and adopt the new SPL boot to reduce the code number. I expect
>> get the advice for this patch. But I wait for a long time, I do not know
>> who can help me to review this patch? who can merge this patch?
> 
> Please don't be discouraged by missing comments - in general the rule
> is "No news is Good News", i. e. receiving no comments is often better
> than receiving a large number of deep-going change requests ;-)

Good to know.
> 
> These boards use Samsung SoCs, so the Samsung custodian (Minkyu Kang,
> on cc:) is supposed to process these, but please note that the merge
> window is currently closed, which might explain for lack of comments.

Thanks for your explanation.

Thanks,
hongbo
> 
>> If anyone believe me, I will continue to maintain the board, Maybe I
>> have some limitation, Such as I have a poor english.  But I believe I
>> can keep the board can work normal in u-boot mainline, and I will reply
>> the email about S3C64xx CPU in time.
> 
> Thanks you very much in advance.  Your efforts are highly appreciated.
> 
> Best regards,
> 
> Wolfgang Denk
>