[U-Boot] [PATCH 10/17] am33xx: Move the call to ddr_pll_config, make it take the frequency

Tom Rini trini at ti.com
Mon Jul 30 18:48:56 CEST 2012


Depending on if we have DDR2 or DDR3 on the board we will need to call
ddr_pll_config with a different value.  This call can be delayed
slightly to the point where we know which type of memory we have.

Signed-off-by: Tom Rini <trini at ti.com>
---
 arch/arm/cpu/armv7/am33xx/clock.c            |    5 ++---
 arch/arm/cpu/armv7/am33xx/emif4.c            |    2 ++
 arch/arm/include/asm/arch-am33xx/sys_proto.h |    1 +
 3 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c
index d05780c..82bbba2 100644
--- a/arch/arm/cpu/armv7/am33xx/clock.c
+++ b/arch/arm/cpu/armv7/am33xx/clock.c
@@ -216,7 +216,7 @@ static void per_pll_config(void)
 		;
 }
 
-static void ddr_pll_config(void)
+void ddr_pll_config(unsigned int ddrpll_m)
 {
 	u32 clkmode, clksel, div_m2;
 
@@ -234,7 +234,7 @@ static void ddr_pll_config(void)
 		;
 
 	clksel = clksel & (~CLK_SEL_MASK);
-	clksel = clksel | ((DDRPLL_M << CLK_SEL_SHIFT) | DDRPLL_N);
+	clksel = clksel | ((ddrpll_m << CLK_SEL_SHIFT) | DDRPLL_N);
 	writel(clksel, &cmwkup->clkseldpllddr);
 
 	div_m2 = div_m2 & CLK_DIV_SEL;
@@ -268,7 +268,6 @@ void pll_init()
 	mpu_pll_config();
 	core_pll_config();
 	per_pll_config();
-	ddr_pll_config();
 
 	/* Enable the required interconnect clocks */
 	enable_interface_clocks();
diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c
index 9b1a80c..12f270a 100644
--- a/arch/arm/cpu/armv7/am33xx/emif4.c
+++ b/arch/arm/cpu/armv7/am33xx/emif4.c
@@ -21,6 +21,7 @@
 #include <asm/arch/ddr_defs.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
 #include <asm/io.h>
 #include <asm/emif.h>
 
@@ -150,6 +151,7 @@ void config_ddr(short ddr_type)
 	enable_emif_clocks();
 
 	if (ddr_type == EMIF_REG_SDRAM_TYPE_DDR2) {
+		ddr_pll_config(266);
 		config_vtp();
 
 		config_cmd_ctrl(&ddr2_cmd_ctrl_data);
diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h
index 6c58f1b..eef5573 100644
--- a/arch/arm/include/asm/arch-am33xx/sys_proto.h
+++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h
@@ -30,4 +30,5 @@ int print_cpuinfo(void);
 
 u32 get_device_type(void);
 void setup_clocks_for_console(void);
+void ddr_pll_config(unsigned int ddrpll_M);
 #endif
-- 
1.7.9.5



More information about the U-Boot mailing list