[U-Boot] Please pull u-boot-staging.git/sr at denx.de
Albert ARIBAUD
albert.u.boot at aribaud.net
Fri Jul 6 23:30:47 CEST 2012
Hi Stefan,
On Fri, 6 Jul 2012 09:01:07 +0200, Stefan Roese <sr at denx.de> wrote:
> Hi Albert,
>
> as requested, I rebased my staging repository with the SPEAr patches
> onto latest u-boot-arm/master. Please try again.
>
> Thanks,
> Stefan
>
>
> The following changes since commit 8663092787ac2c39fbdb235cd162c5e893646b40:
>
> cm-t35: fix incorrect NAND_ECC layout selection (2012-07-05 19:22:27 +0200)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-staging sr at denx.de
>
> for you to fetch changes up to b36215ee1a532603d4f94a8a78f7a581068c7377:
>
> MTD: SPEAr SMI: Add write support for length < 4 bytes (2012-07-06 08:28:31 +0200)
>
> ----------------------------------------------------------------
> Amit Virdi (10):
> st_smi: Return error in case TFF is not set
> st_smi: Change SMI timeout values
> st_smi: Enhance the error handling
> st_smi: Change timeout loop implementation
> SPEAr: Fix ARM relocation support
> SPEAr: Eliminate dependency on Xloader table
> SPEAr: Initialize SNOR in early_board_init_f
> SPEAr: Remove CONFIG_MTD_NAND_VERIFY_WRITE to speed up NAND access
> cleanup/SPEAr: Remove unnecessary parenthesis
> cleanup/SPEAr: Define configuration flags more elegantly
>
> Armando Visconti (4):
> st_smi: Removed no needed dependency on ST_M25Pxx_ID
> st_smi: Change the flash probing method
> st_smi: Fix bug in flash_print_info()
> st_smi: Fixed page size for Winbond W25Q128FV flash
>
> Shiraz Hashim (5):
> st_smi: Move status register read before modifying ctrl register
> SPEAr: Enable autoneg for ethernet
> SPEAr: Enable dcache for fast file transfer
> SPEAr: explicitly select clk src for UART
> SPEAr: Correct SoC ID offset in misc configuration space
>
> Simon Glass (1):
> arm: Don't use printf() in SPL builds
>
> Stefan Roese (10):
> net: Multiple updates/enhancements to designware.c
> GPIO: Add SPEAr GPIO driver
> SPL: common/Makefile: Add image.c to SPL build
> SPL: lib/Makefile: Add crc32.c to SPL build
> SPL: ARM: spear: Remove some objects from SPL build
> Makefile: Add u-boot.spr build target (SPEAr)
> SPL: ARM: spear: Add SPL support for SPEAr600 platform
> rtc/m41t62: Add support for M41T82 with HT (Halt Update)
> i2c: designware_i2c.c: Add support for the "i2c probe" command
> MTD: SPEAr SMI: Add write support for length < 4 bytes
>
> Vipin KUMAR (14):
> mtd/NAND: Add FSMC driver support
> SPEAr: Configure FSMC driver for NAND interface
> mtd/NAND: Remove obsolete SPEAr specific NAND drivers
> st_smi: Add support for SPEAr SMI driver
> st_smi: Read status until timeout happens
> SPEAr: Place ethaddr write and read within CONFIG_CMD_NET
> SPEAr: Configure network support for spear SoCs
> SPEAr: Add macb driver support for spear310 and spear320
> SPEAr: Add basic arch related support for SPEAr SoCs
> SPEAr: Add configuration options for spear3xx and spear6xx boards
> SPEAr: Remove unused flag (CONFIG_SYS_HZ_CLOCK)
> SPEAr: Change the default environment variables
> SPEAr: Enable usb device high speed support
> SPEAr: Enable udc and usb-console support only for usbtty configuration
>
> Vipin Kumar (6):
> st_smi: Fix smi read status
> SPEAr: Add interface information in initialization
> SPEAr: Enable CONFIG_SYS_FLASH_PROTECTION
> SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE
> SPEAr: Enable CONFIG_SYS_FLASH_EMPTY_INFO macro
> SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and evb
>
> Makefile | 17 +
> arch/arm/cpu/arm926ejs/spear/Makefile | 25 +-
> arch/arm/cpu/arm926ejs/spear/cpu.c | 87 ++++
> arch/arm/cpu/arm926ejs/spear/spear600.c | 236 ++++++++++
> arch/arm/cpu/arm926ejs/spear/spl.c | 282 ++++++++++++
> arch/arm/cpu/arm926ejs/spear/spl_boot.c | 197 +++++++++
> .../spear/spr600_mt47h128m8_3_266_cl5_async.c | 130 ++++++
> .../spear/spr600_mt47h32m16_333_cl5_psync.c | 135 ++++++
> .../spear/spr600_mt47h32m16_37e_166_cl4_sync.c | 130 ++++++
> .../spear/spr600_mt47h64m16_3_333_cl5_psync.c | 144 ++++++
> arch/arm/cpu/arm926ejs/spear/start.S | 122 ++++++
> arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds | 87 ++++
> arch/arm/include/asm/arch-spear/clk.h | 27 ++
> arch/arm/include/asm/arch-spear/gpio.h | 40 ++
> arch/arm/include/asm/arch-spear/hardware.h | 63 ++-
> arch/arm/include/asm/arch-spear/spr_defs.h | 23 +
> arch/arm/include/asm/arch-spear/spr_gpt.h | 4 +-
> arch/arm/include/asm/arch-spear/spr_misc.h | 147 ++++++-
> arch/arm/include/asm/arch-spear/spr_nand.h | 57 ---
> arch/arm/include/asm/arch-spear/spr_ssp.h | 45 ++
> arch/arm/include/asm/arch-spear/spr_syscntl.h | 14 +
> .../arm/include/asm/arch-spear/spr_xloader_table.h | 67 ---
> arch/arm/lib/eabi_compat.c | 3 +-
> board/spear/common/Makefile | 2 +
> board/spear/common/spr_misc.c | 102 ++---
> board/spear/spear300/config.mk | 39 --
> board/spear/spear300/spear300.c | 27 +-
> board/spear/spear310/config.mk | 44 --
> board/spear/spear310/spear310.c | 44 +-
> board/spear/spear320/config.mk | 44 --
> board/spear/spear320/spear320.c | 43 +-
> board/spear/spear600/Makefile | 2 +
> board/spear/spear600/config.mk | 39 --
> board/spear/spear600/spear600.c | 30 +-
> boards.cfg | 24 +-
> common/Makefile | 2 +-
> config.mk | 4 +
> doc/README.spear | 54 ++-
> drivers/gpio/Makefile | 1 +
> drivers/gpio/spear_gpio.c | 102 +++++
> drivers/i2c/designware_i2c.c | 16 +-
> drivers/mtd/Makefile | 2 +-
> drivers/mtd/nand/Makefile | 1 +
> drivers/mtd/nand/fsmc_nand.c | 486 +++++++++++++++++++++
> drivers/mtd/nand/spr_nand.c | 124 ------
> drivers/mtd/{spr_smi.c => st_smi.c} | 255 +++++++----
> drivers/net/designware.c | 126 +++---
> drivers/net/designware.h | 2 +
> drivers/rtc/m41t62.c | 10 +-
> include/configs/spear-common.h | 94 ++--
> include/configs/{spear3xx.h => spear3xx_evb.h} | 62 ++-
> include/configs/{spear6xx.h => spear6xx_evb.h} | 20 +-
> include/linux/mtd/fsmc_nand.h | 101 +++++
> .../spr_smi.h => include/linux/mtd/st_smi.h | 10 +-
> include/netdev.h | 2 +-
> lib/Makefile | 2 +-
> 56 files changed, 3229 insertions(+), 769 deletions(-)
> create mode 100644 arch/arm/cpu/arm926ejs/spear/cpu.c
> create mode 100644 arch/arm/cpu/arm926ejs/spear/spear600.c
> create mode 100644 arch/arm/cpu/arm926ejs/spear/spl.c
> create mode 100644 arch/arm/cpu/arm926ejs/spear/spl_boot.c
> create mode 100644 arch/arm/cpu/arm926ejs/spear/spr600_mt47h128m8_3_266_cl5_async.c
> create mode 100644 arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_333_cl5_psync.c
> create mode 100644 arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_37e_166_cl4_sync.c
> create mode 100644 arch/arm/cpu/arm926ejs/spear/spr600_mt47h64m16_3_333_cl5_psync.c
> create mode 100644 arch/arm/cpu/arm926ejs/spear/start.S
> create mode 100644 arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
> create mode 100644 arch/arm/include/asm/arch-spear/clk.h
> create mode 100644 arch/arm/include/asm/arch-spear/gpio.h
> delete mode 100644 arch/arm/include/asm/arch-spear/spr_nand.h
> create mode 100644 arch/arm/include/asm/arch-spear/spr_ssp.h
> delete mode 100644 arch/arm/include/asm/arch-spear/spr_xloader_table.h
> delete mode 100644 board/spear/spear300/config.mk
> delete mode 100644 board/spear/spear310/config.mk
> delete mode 100644 board/spear/spear320/config.mk
> delete mode 100644 board/spear/spear600/config.mk
> create mode 100644 drivers/gpio/spear_gpio.c
> create mode 100644 drivers/mtd/nand/fsmc_nand.c
> delete mode 100644 drivers/mtd/nand/spr_nand.c
> rename drivers/mtd/{spr_smi.c => st_smi.c} (62%)
> rename include/configs/{spear3xx.h => spear3xx_evb.h} (72%)
> rename include/configs/{spear6xx.h => spear6xx_evb.h} (74%)
> create mode 100644 include/linux/mtd/fsmc_nand.h
> rename arch/arm/include/asm/arch-spear/spr_smi.h => include/linux/mtd/st_smi.h (95%)
Applied to u-boot-arm/master, thanks.
Amicalement,
--
Albert.
More information about the U-Boot
mailing list