[U-Boot] [PATCH V3 2/2] Kirkwood: Add support for Ka-Ro TK71

[Prafulla Wadaskar]

> -----Original Message-----
> From: Marek Vasut [mailto:marex at denx.de]
> Sent: 03 July 2012 17:58
> To: u-boot at lists.denx.de
> Cc: Marek Vasut; Prafulla Wadaskar; Wolfgang Denk
> Subject: [PATCH V3 2/2] Kirkwood: Add support for Ka-Ro TK71
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Prafulla Wadaskar <prafulla at marvell.com>
> Cc: Wolfgang Denk <wd at denx.de>
...snip...
> diff --git a/board/karo/tk71/tk71.c b/board/karo/tk71/tk71.c
> new file mode 100644
> index 0000000..50b563e
> --- /dev/null
> +++ b/board/karo/tk71/tk71.c
> @@ -0,0 +1,174 @@
> +/*
> + * Copyright (C) 2012 Marek Vasut <marex at denx.de>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
> + * MA 02110-1301 USA
> + */
> +
> +#include <common.h>
> +#include <miiphy.h>
> +#include <asm/arch/cpu.h>
> +#include <asm/arch/kirkwood.h>
> +#include <asm/arch/mpp.h>
> +#include <asm/io.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#define TK71_OE_LOW			(~0)
> +#define TK71_OE_HIGH			(~0)
> +#define TK71_OE_VAL_LOW			(0)
> +#define TK71_OE_VAL_HIGH		(0)
> +
> +int board_early_init_f(void)
> +{
> +	unsigned long size = get_ram_size(PHYS_SDRAM_1,
> PHYS_SDRAM_1_SIZE);
> +
> +	/* 256MB module, adjust BAR register */
> +	if (size == 256 * 1024 * 1024) {
> +		writel(KW_REG_CPUCS_WIN_ENABLE | KW_REG_CPUCS_WIN_SIZE(0xf),
> +			KW_REG_CPUCS_WIN_SZ(0));
> +	}

Hi Marek
This is first patch to support this board series, so ideally you don't need further tuning of DRAM configuration, if you address it in kwbimage.cfg

You may think of this approach if you have similar board support in future.

Please post the patch w/o updating DRAM registers or
Let's do it in cleaner way.
macros are NOT encouraged to use for register definition.

Regards...
Prafulla . . .