[U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG

[Bill]

That did it!  Thanks.

Bill


On 7/30/2012 3:59 PM, Fabio Estevam wrote:
> On Mon, Jul 30, 2012 at 3:53 PM, Bill<bsousan at techsi.com>  wrote:
>> Progress!   I switched all the references from ttyAMA0...   to ttyAM0.  Also
>> changed netargs too.  Now it starts to boot linux but hangs right after the
>> line of:
>>      mxs_cpu_init:  cpufreq init finished.
> Please remove cpufreq from your kernel config.
>
> You can use this patch:
> https://github.com/Freescale/meta-fsl-arm/blob/denzil/recipes-kernel/linux/linux-imx-2.6.35.3/mx28-removecpufreq.patch
>
> Regards,
>
> Fabio Estevam

-- 
William (Bill) L. Sousan, Ph.D.
(w) 402.331.4977 ext. 4002
bsousan at techsi.com
Technical Support Inc.
11253 John Galt Blvd
Omaha, NE 68137
www.techsi.com
8(a) SDB Certified, ISO 9001:2008