[U-Boot] Building u-boot for iMX28 and getting error in mkimage of missing command line parameter CONFIG_IMX_CONFIG

[Fabio Estevam]

On Mon, Jul 30, 2012 at 3:53 PM, Bill <bsousan at techsi.com> wrote:
> Progress!   I switched all the references from ttyAMA0...   to ttyAM0.  Also
> changed netargs too.  Now it starts to boot linux but hangs right after the
> line of:
>     mxs_cpu_init:  cpufreq init finished.

Please remove cpufreq from your kernel config.

You can use this patch:
https://github.com/Freescale/meta-fsl-arm/blob/denzil/recipes-kernel/linux/linux-imx-2.6.35.3/mx28-removecpufreq.patch

Regards,

Fabio Estevam