[U-Boot] uboot for zyxel nsa320

[kqt4at5v at gmail.com]

On Sat, 14 Jul 2012, Luka Perkov wrote:

> Hi kqt4at5v,
>
> On Sat, Jul 14, 2012 at 04:51:13AM -0500, kqt4at5v at gmail.com wrote:
>> NSA320>> printenv
>> bootargs=console=ttyS0,115200 mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2) root=/dev/nfs rw init=/init
>> bootcmd=nand read.e 0x2000000 $(kernel_addr) 0xA00000; bootm 0x2000000
>> bootdelay=2
>> baudrate=115200
>> loads_echo=0
>> eth1addr=00:19:CB:00:51:82
>> ipaddr=10.4.50.165
>> serverip=10.4.50.5
>> rootpath=/mnt/ARM_FS/
>> netmask=255.255.255.0
>> nandEcc=1bit
>> MODEL_ID=DD01
>> PRODUCT_NAME=NSA-320
>> FEATURE_BIT=00
>> CONTRY_TYPE=FF
>> VENDOR_NAME=ZyXEL Communications Corp.
>
> This is not from official uboot.
>
> Either your kernel that you are trying to boot is is not good or you did
> not set serial output correctly.
>

These variables are from the version of uboot that comes installed on 
the Zyxel NSA320. It works ok but any other version of uboot does not. I 
would like to fix that but I do not know how to trouble shoot this.

Richard