[U-Boot] [PATCH 8/8 V6] CONFIG: SMDK5250: I2C: Enable I2C

Simon Glass sjg at chromium.org
Thu Jul 19 20:23:23 CEST 2012


On Thu, Jul 19, 2012 at 12:40 PM, Rajeshwari Shinde
<rajeshwari.s at samsung.com> wrote:
> This enables I2C support on smdk5250.
> Pinmux setting moved to board file to avoid repeated setting of
> gpio lines.
>
> Signed-off-by: Alim Akhtar <alim.akhtar at samsung.com>
> Signed-off-by: Doug Anderson <dianders at chromium.org>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s at samsung.com>
> Acked-by: Simon Glass <sjg at chromium.org>

Acked-by: Simon Glass <sjg at chromium.org>

> ---
> Changes in V2:
>         - None
> Changes in V3:
>         - None
> Changes in V4:
>         - None
> Changes in V5:
>         - Pinmux setting of gpio lines moved to board_early_init_f.
> Chnages in V6:
>         - EXYNOS_I2C_SPACING moved to cpu.h
>         - board_i2c_init compiled only when CONFIG_DRIVER_S3C24X0_I2C is defined.
>  board/samsung/smdk5250/smdk5250.c |   28 +++++++++++++++++++++++++++-
>  include/configs/smdk5250.h        |    8 ++++++++
>  2 files changed, 35 insertions(+), 1 deletions(-)
>
> diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
> index b593325..12e6e66 100644
> --- a/board/samsung/smdk5250/smdk5250.c
> +++ b/board/samsung/smdk5250/smdk5250.c
> @@ -172,9 +172,35 @@ static int board_uart_init(void)
>         return 0;
>  }
>
> +#ifdef CONFIG_DRIVER_S3C24X0_I2C
> +static int board_i2c_init(void)
> +{
> +       int i, err;
> +
> +       for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) {
> +               err = exynos_pinmux_config((PERIPH_ID_I2C0 + i),
> +                                               PINMUX_FLAG_NONE);
> +               if (err) {
> +                       debug("I2C%d not configured\n", (PERIPH_ID_I2C0 + i));
> +                       return err;
> +               }
> +       }
> +       return 0;
> +}
> +#endif
> +
>  #ifdef CONFIG_BOARD_EARLY_INIT_F
>  int board_early_init_f(void)
>  {
> -       return board_uart_init();
> +       int err;
> +       err = board_uart_init();
> +       if (err) {
> +               debug("UART init failed\n");
> +               return err;
> +       }
> +#ifdef CONFIG_DRIVER_S3C24X0_I2C
> +       err = board_i2c_init();
> +#endif
> +       return err;
>  }
>  #endif
> diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
> index c0eaaf8..65dfe9f 100644
> --- a/include/configs/smdk5250.h
> +++ b/include/configs/smdk5250.h
> @@ -198,6 +198,14 @@
>
>  #define CONFIG_SYS_INIT_SP_ADDR        (CONFIG_SYS_LOAD_ADDR - 0x1000000)
>
> +/* I2C */
> +#define CONFIG_HARD_I2C
> +#define CONFIG_CMD_I2C
> +#define CONFIG_SYS_I2C_SPEED   100000          /* 100 Kbps */
> +#define CONFIG_DRIVER_S3C24X0_I2C
> +#define CONFIG_I2C_MULTI_BUS
> +#define CONFIG_MAX_I2C_NUM     8
> +
>  /* Ethernet Controllor Driver */
>  #ifdef CONFIG_CMD_NET
>  #define CONFIG_SMC911X
> --
> 1.7.4.4
>


More information about the U-Boot mailing list