[U-Boot] [i2c] Pull request

[Wolfgang Denk]

Dear Heiko Schocher,

In message <5017901A.2060005 at denx.de> you wrote:
> Hello Wolfgang,
> 
> The following changes since commit b98b611502f5e0a85a1f8e15cf46c470cb105614:
> 
>    Merge branch 'next' of git://git.denx.de/u-boot (2012-07-30 20:39:52 +0200)
> 
> are available in the git repository at:
> 
>    git://git.denx.de/u-boot-i2c.git master
> 
> Holger Brunck (2):
>        i2c: deblock i2c bus also if accessed before realocation
>        km/common: remove printfs for i2c deblocking code
> 
> Rajeshwari Shinde (8):
>        EXYNOS: CLK: Add i2c clock
>        EXYNOS: Add I2C base address.
>        EXYNOS5: define EXYNOS5_I2C_SPACING
>        EXYNOS: PINMUX: Add pinmux support for I2C
>        I2C: Move struct s3c24x0_i2c to a common place.
>        I2C: Modify the I2C driver for EXYNOS5
>        I2C: Add support for Multi channel
>        CONFIG: SMDK5250: I2C: Enable I2C
> 
> Troy Kisky (25):
>        mxc_i2c: fix i2c_imx_stop
>        mxc_i2c: remove ifdef of CONFIG_HARD_I2C
>        mxc_i2c: create tx_byte function
>        mxc_i2c: clear i2sr before waiting for bit
>        mxc_i2c: create i2c_init_transfer
>        mxc_i2c: call i2c_imx_stop on error in i2c_read/i2c_write
>        mxc_i2c.c: code i2c_probe as a 0 length i2c_write
>        mxc_i2c: combine i2c_imx_bus_busy and i2c_imx_trx_complete into wait_for_sr_state
>        mxc_i2c: remove redundant read
>        mxc_i2c: place imx_start code inline
>        mxc_i2c: place i2c_reset code inline
>        mxc_i2c: don't disable controller after every transaction
>        mxc_i2c: change slave addr if conflicts with destination.
>        mxc_i2c: check for arbitration lost
>        mxc_i2c: add retries
>        mxc_i2c: add i2c_regs argument to i2c_imx_stop
>        mxc_i2c: prep work for multiple busses support
>        mxc_i2c: add bus recovery support
>        mxc_i2c: finish adding CONFIG_I2C_MULTI_BUS support
>        iomux-v3: remove include of mx6x_pins.h
>        i.mx: iomux-v3.h: move to imx-common include directory
>        i.mx: iomux-v3.c: move to imx-common directory
>        i.mx53: add definition for I2C3_BASE_ADDR
>        imx-common: add i2c.c for bus recovery support
>        mx6qsabrelite: add i2c multi-bus support
> 
>   arch/arm/cpu/armv7/exynos/clock.c                  |   33 ++
>   arch/arm/cpu/armv7/exynos/pinmux.c                 |   52 +++
>   arch/arm/cpu/armv7/imx-common/Makefile             |    4 +-
>   arch/arm/cpu/armv7/imx-common/i2c.c                |   99 ++++
>   arch/arm/cpu/armv7/{mx6 => imx-common}/iomux-v3.c  |    3 +-
>   arch/arm/cpu/armv7/mx5/clock.c                     |   20 +
>   arch/arm/cpu/armv7/mx6/Makefile                    |    2 +-
>   arch/arm/cpu/armv7/mx6/clock.c                     |   20 +
>   arch/arm/include/asm/arch-exynos/clk.h             |    1 +
>   arch/arm/include/asm/arch-exynos/cpu.h             |    5 +
>   arch/arm/include/asm/arch-exynos/periph.h          |    8 +
>   arch/arm/include/asm/arch-mx5/clock.h              |    1 +
>   arch/arm/include/asm/arch-mx5/imx-regs.h           |    1 +
>   arch/arm/include/asm/arch-mx6/clock.h              |    1 +
>   arch/arm/include/asm/arch-mx6/mx6x_pins.h          |    2 +-
>   arch/arm/include/asm/arch-s3c24x0/s3c24x0.h        |   10 -
>   .../asm/{arch-mx6 => imx-common}/iomux-v3.h        |    0
>   arch/arm/include/asm/imx-common/mxc_i2c.h          |   42 ++
>   board/freescale/mx6qarm2/mx6qarm2.c                |    2 +-
>   board/freescale/mx6qsabrelite/mx6qsabrelite.c      |   54 ++-
>   board/keymile/common/common.c                      |    3 -
>   board/samsung/smdk5250/smdk5250.c                  |   30 ++-
>   common/cmd_i2c.c                                   |    1 +
>   drivers/i2c/mxc_i2c.c                              |  477 +++++++++++---------
>   drivers/i2c/s3c24x0_i2c.c                          |  221 ++++++----
>   drivers/i2c/s3c24x0_i2c.h                          |   33 ++
>   drivers/usb/host/ehci-mx6.c                        |    2 +-
>   include/configs/mx6qsabrelite.h                    |    6 +-
>   include/configs/smdk5250.h                         |   10 +
>   29 files changed, 822 insertions(+), 321 deletions(-)
>   create mode 100644 arch/arm/cpu/armv7/imx-common/i2c.c
>   rename arch/arm/cpu/armv7/{mx6 => imx-common}/iomux-v3.c (97%)
>   rename arch/arm/include/asm/{arch-mx6 => imx-common}/iomux-v3.h (100%)
>   create mode 100644 arch/arm/include/asm/imx-common/mxc_i2c.h
>   create mode 100644 drivers/i2c/s3c24x0_i2c.h

Applied, thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"The one charm of marriage is that it makes a  life  of  deception  a
neccessity."                                            - Oscar Wilde