[U-Boot] [PATCH 00/10 V6] EXYNOS5: Support for Exynos5250 Rev 1.0

Rajeshwari Shinde rajeshwari.s at samsung.com
Wed Jul 4 08:02:50 CEST 2012


This patch set adds support for Exynos5250 Rev 1.0.
Exynos5250 Rev 1.0 supports DDR3 Memory configuration and
support for LPDDR2 is removed.
Exynos5250 Rev 1.0 supports DWMMC controller and does not support SDHCI
controller.
After DWMMC driver is added to Mainline support for generic S5P MMC driver
will be removed.

Due to Support of SDHCI controller currently still there for
EXYNOS5 you can see the following error on boot.

mmc_reset: timeout error
mmc_change_clock: timeout error
mmc_send_cmd: waiting for status update
MMC init failed

Changes in V2:
        - Included Paramateric structure with in #ifndef __ASSEMBLY__.
Chnages in V3:
        - Incorporated the review comments.
        - Added support for BPLL.
        - Corrected the gpio pinmux settings.
Changes in V4:
        - Fixed Warning message.
Changes in V5:
        - Corrected indentation error.
Changes in V6:
	- Fixed Compiler warning messages.

Rajeshwari Shinde (10):
  ARCH: SPL: Add parametric board initializer
  SMDK5250: SPL: Define parametric board initializer
  SMDK5250: Add smdk5250-uboot-spl.lds
  EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev
    1.0
  EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0
  Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0
  EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0
  EXYNOS5: CLOCK: Add BPLL support
  EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0
  SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0

 arch/arm/cpu/armv7/exynos/clock.c             |   28 +-
 arch/arm/cpu/armv7/exynos/pinmux.c            |   22 +-
 arch/arm/include/asm/arch-exynos/clk.h        |    1 +
 arch/arm/include/asm/arch-exynos/clock.h      |  237 +++++----
 arch/arm/include/asm/arch-exynos/dmc.h        |   65 +++
 arch/arm/include/asm/arch-exynos/gpio.h       |    7 +-
 arch/arm/include/asm/arch-exynos/spl.h        |   97 ++++
 board/samsung/smdk5250/Makefile               |    3 +-
 board/samsung/smdk5250/clock_init.c           |  714 +++++++++++++++++++----
 board/samsung/smdk5250/clock_init.h           |  149 +++++
 board/samsung/smdk5250/dmc_common.c           |  199 +++++++
 board/samsung/smdk5250/dmc_init.c             |  462 ---------------
 board/samsung/smdk5250/dmc_init_ddr3.c        |  228 ++++++++
 board/samsung/smdk5250/setup.h                |  763 +++++++++++++++----------
 board/samsung/smdk5250/smdk5250-uboot-spl.lds |   66 +++
 board/samsung/smdk5250/smdk5250.c             |    6 +-
 board/samsung/smdk5250/smdk5250_spl.c         |   68 +++
 include/configs/smdk5250.h                    |    7 +-
 18 files changed, 2100 insertions(+), 1022 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-exynos/spl.h
 create mode 100644 board/samsung/smdk5250/clock_init.h
 create mode 100644 board/samsung/smdk5250/dmc_common.c
 delete mode 100644 board/samsung/smdk5250/dmc_init.c
 create mode 100644 board/samsung/smdk5250/dmc_init_ddr3.c
 create mode 100644 board/samsung/smdk5250/smdk5250-uboot-spl.lds
 create mode 100644 board/samsung/smdk5250/smdk5250_spl.c

-- 
1.7.4.4



More information about the U-Boot mailing list