[U-Boot] mx53loco hangs on 2012.07

[Robert Nelson]

On Tue, Jul 31, 2012 at 1:25 PM, Fabio Estevam <festevam at gmail.com> wrote:
> Hi,
>
> Just tried 2012.07 on a mx53loco and this is what I got:
>
> U-Boot 2012.07 (Jul 31 2012 - 15:21:51)
>
> Board: MX53 LOCO
> I2C:   ready
> DRAM:  1 GiB
> WARNING: Caches not enabled
> CPU:   Freescale i.MX53 family rev2.0 at 1000 MHz
> Reset cause: POR
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
>
> (Hangs here)
>
> Have anyone else seen this? I will start debugging it, and any
> suggestions are welcome.

It's actually not hanging up, if you have a boot script, it seems to
runs that just fine, but it will not print it to the serial terminal..

This would seem to redirect the prompt the lcd?
http://git.denx.de/?p=u-boot.git;a=commit;h=f714b0a911e24cc733553f02b30d508212f339fe

before that commit i was using "4398d55" with no issues..

mx53loco-r

U-Boot 2012.07-00007-g7395c76 (Jul 31 2012 - 11:29:17)


Board: MX53 LOCO

I2C:   ready

DRAM:  1 GiB

WARNING: Caches not enabled

CPU:   Freescale i.MX53 family rev2.1 at 1000 MHz

Reset cause: WDOG

MMC:   FSL_SDHC: 0, FSL_SDHC: 1

*** Warning - bad CRC, using default environment


Uncompressing Linux... done, booting the kernel....

Regards,

-- 
Robert Nelson
http://www.rcn-ee.com/