[U-Boot] ARM CONFIG_OF_CONTROL status

Michal Simek monstr at monstr.eu
Tue Jul 3 11:21:38 CEST 2012


On 06/29/2012 04:32 AM, Simon Glass wrote:
> Hi,
>
> On Wed, Jun 27, 2012 at 11:49 PM, Michal Simek <monstr at monstr.eu <mailto:monstr at monstr.eu>> wrote:
>
>     On 06/28/2012 07:57 AM, Simon Glass wrote:
>
>         Hi Michal,
>
>
>         On Wed, Jun 27, 2012 at 10:50 PM, Michal Simek <monstr at monstr.eu <mailto:monstr at monstr.eu> <mailto:monstr at monstr.eu <mailto:monstr at monstr.eu>>> wrote:
>
>             Hi Simon,
>
>
>             On 06/28/2012 03:10 AM, Simon Glass wrote:
>
>                 Hi Michal,
>
>
>                 On Wed, Jun 27, 2012 at 7:35 AM, Michal Simek <monstr at monstr.eu <mailto:monstr at monstr.eu> <mailto:monstr at monstr.eu <mailto:monstr at monstr.eu>> <mailto:monstr at monstr.eu <mailto:monstr at monstr.eu> <mailto:monstr at monstr.eu <mailto:monstr at monstr.eu>>>> wrote:
>
>                     Hi Simon,
>
>
>                     On 06/27/2012 03:58 PM, Simon Glass wrote:
>
>                         Hi,
>
>
>                         On Wed, Jun 27, 2012 at 2:29 AM, Michal Simek <monstr at monstr.eu <mailto:monstr at monstr.eu> <mailto:monstr at monstr.eu <mailto:monstr at monstr.eu>> <mailto:monstr at monstr.eu <mailto:monstr at monstr.eu> <mailto:monstr at monstr.eu <mailto:monstr at monstr.eu>>> <mailto:monstr at monstr.eu <mailto:monstr at monstr.eu> <mailto:monstr at monstr.eu <mailto:monstr at monstr.eu>> <mailto:monstr at monstr.eu <mailto:monstr at monstr.eu> <mailto:monstr at monstr.eu <mailto:monstr at monstr.eu>>>>> wrote:
>
>                             Hi,
>
>                             can you please update me about current state of CONFIG_OF_CONTROL for ARM?
>                             Are there any other archs/boards which will use this option?
>
>                             Or any other git repo out of mainline u-boot?
>
>
>                         Exynos is in progress - development is happening in the Chromium tree and being upstreamed in chunks (although no fdt patches have been sent yet).
>
>
>                     ok.
>
>
>
>
>                             Has someone tried to look for devices based on compatible property?
>                             I see that in usb driver it is based on aliases which is not the best solution.
>
>
>                         U-Boot doesn't yet have a device model which would allow this in the general case. For now, drivers look for their own compatible nodes. This works well enough until we have a device model.
>
>                         There are other limitations also - for example USB supports only a single controller type working at one time (a restriction we may need to look at to support USB2 and USB3 together). So even if two USB drivers decided that they both found compatible nodes, only one of them could operate. So for now aliases provide just an ordering, nothing else.
>
>
>
>                     I have looked at the code and did some tests on Microblaze.
>
>                     Firstly I have tried to change emaclite ethernet initialization and I ended with this code fragment which could be
>                     broadly used by other drivers.
>
>                             int offset = 0;
>                             do {
>                                     offset = fdt_node_offset_by_compatible(______gd->fdt_blob, offset, "xlnx,xps-ethernetlite-1.00.a" );
>
>
>
>                 You could check if offset < 0 here, or !fdtdec_get_is_enabled(gd->____fdt_blob, offset)
>
>
>                                     u32 rxpp = fdtdec_get_int(gd->fdt_blob, offset, "xlnx,rx-ping-pong", 0);
>                                     u32 txpp = fdtdec_get_int(gd->fdt_blob, offset, "xlnx,tx-ping-pong", 0);
>                                     u32 reg = fdtdec_get_int(gd->fdt_blob, offset, "reg", 0);
>
>
>                 Maybe fdtdec_get_addr()
>
>
>             yeah right.
>
>
>                     do {
>                             offset = fdt_node_offset_by_compatible(____gd->fdt_blob, offset, "xlnx,xps-ethernetlite-1.00.a" );
>                             u32 rxpp = fdtdec_get_int(gd->fdt_blob, offset, "xlnx,rx-ping-pong", 0);
>                             u32 txpp = fdtdec_get_int(gd->fdt_blob, offset, "xlnx,tx-ping-pong", 0);
>                             u32 reg = fdtdec_get_addr(gd->fdt_blob, offset, "reg");
>                             if (reg != FDT_ADDR_T_NONE)
>
>                                     ret |= xilinx_emaclite_initialize(____bis, reg, txpp, rxpp);
>                     } while (offset != -1);
>
>
>
>
>                                     if (reg)
>                                             ret |= xilinx_emaclite_initialize(______bis, reg, txpp, rxpp);
>
>
>                             } while (offset != -1);
>
>                     What do you think? This code is in platform file.
>
>
>                 Seems reasonable to me.
>
>
>             ok.
>
>
>
>
>                     Also I have tested code around aliases which parse DTS aliases list for console initialization
>                     and I have also get it work for !CONSOLE_SERIAL_MULTI case.
>
>
>                 Great - I did send a patch to the list for fdt serial, but haven't really got back to it.
>
>
>
>             Can you give me link to it or just subject?
>
>
>         WIP: fdt: Add serial port controlled by device tree
>
>         These are the related commits in the Chromium tree. I will get to upstreaming these at some point.
>
>           1fe36bf gen: serial: Disable FDT serial console if requested
>         c80331f gen: Adjust fdt console to be silent if no alias present
>         2006b07 gen: fdt: Add serial port controlled by device tree
>         711f29d fixup: gen: fdt: Fix compile-time errors
>         0c8fc5d lost: gen: x86: Allow NS16550 driver to support IO and memory mapped reg
>         da92af5 gen: Fix a compiler warning in serial_fdt.c
>         ab1d572 gen: fdt: silence console in response to device tree 'silent' option
>         376c215 lost: gen: fdt: Add serial port controlled by device tree
>
>
>     Can you also send me link to Chromium tree?
>
>
> Yes this should work:
>
> https://git.chromium.org/git/chromiumos/third_party/u-boot.git
>
>
>     I am going to send RFC for emaclite driver and cleanup Microblaze port.
>
>

Simon: Can you please correct this code in arm board.c

	gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16,
						(uintptr_t)gd->fdt_blob);


Have you tested this option? I am not sure if this can even work in sense
that (-> means call) getenv_ulong -> getenv_f -> env_get_char -> env_get_char_memory/init -> etc.

But gd->env_valid is always 0 because initialization is done in init_sequence below
this code. It means that this variable is taken only from default_environment.

Can you please check it?

Thanks,
Michal


-- 
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian


More information about the U-Boot mailing list