[U-Boot] [PATCH 09/13] S3C64XX: Change SROM init to use read/write operation

Zhong Hongbo bocui107 at gmail.com
Sat Jul 7 11:57:08 CEST 2012


From: Zhong Hongbo <bocui107 at gmail.com>

Signed-off-by: Zhong Hongbo <bocui107 at gmail.com>
---
 arch/arm/cpu/arm1176/s3c64xx/Makefile       |    2 +-
 arch/arm/cpu/arm1176/s3c64xx/srom.c         |   52 +++++++++++++++++++++++++++
 arch/arm/include/asm/arch-s3c64xx/s3c6400.h |   13 +++----
 arch/arm/include/asm/arch-s3c64xx/sromc.h   |   49 +++++++++++++++++++++++++
 board/samsung/smdk6400/smdk6400.c           |   38 ++++++++++++++------
 include/configs/smdk6400.h                  |    1 +
 6 files changed, 135 insertions(+), 20 deletions(-)
 create mode 100644 arch/arm/cpu/arm1176/s3c64xx/srom.c
 create mode 100644 arch/arm/include/asm/arch-s3c64xx/sromc.h

diff --git a/arch/arm/cpu/arm1176/s3c64xx/Makefile b/arch/arm/cpu/arm1176/s3c64xx/Makefile
index 2f37431..28786bf 100644
--- a/arch/arm/cpu/arm1176/s3c64xx/Makefile
+++ b/arch/arm/cpu/arm1176/s3c64xx/Makefile
@@ -30,7 +30,7 @@ LIB	= $(obj)lib$(SOC).o
 
 SOBJS	= reset.o
 
-COBJS-$(CONFIG_S3C64XX)	+= speed.o
+COBJS-$(CONFIG_S3C64XX)	+= speed.o srom.o
 COBJS-y	+= timer.o
 COBJS-$(CONFIG_PWM) += pwm.o
 
diff --git a/arch/arm/cpu/arm1176/s3c64xx/srom.c b/arch/arm/cpu/arm1176/s3c64xx/srom.c
new file mode 100644
index 0000000..297bc2d
--- /dev/null
+++ b/arch/arm/cpu/arm1176/s3c64xx/srom.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2012
+ * Zhong Hongbo <bocui107n at gmail.com>
+ * base on arch/arm/cpu/armv7/s5p-common/sromc.c
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/sromc.h>
+#include <asm/arch/s3c6400.h>
+/*
+ * s3c64xx_config_sromc() - select the proper SROMC Bank and configure the
+ * band width control and bank control registers
+ * srom_bank	- SROM
+ * srom_bw_conf  - SMC Band witdh reg configuration value
+ * srom_bc_conf  - SMC Bank Control reg configuration value
+ */
+void s3c64xx_config_sromc(u32 srom_bank, u32 srom_bw_conf, u32 srom_bc_conf)
+{
+	u32 tmp;
+	struct s3c64xx_sromc *srom =
+		(struct s3c64xx_sromc *)s3c64xx_get_base_sromc();
+
+	/* Configure SMC_BW register to handle proper SROMC bank */
+	tmp = srom->bw;
+	tmp &= ~(0xF << (srom_bank * 4));
+	tmp |= srom_bw_conf;
+
+	writel(tmp, &srom->bw);
+
+	/* Configure SMC_BC register */
+	writel(srom_bc_conf, &srom->bc[srom_bank]);
+}
+
diff --git a/arch/arm/include/asm/arch-s3c64xx/s3c6400.h b/arch/arm/include/asm/arch-s3c64xx/s3c6400.h
index 1d7d2b6..4da95ca 100644
--- a/arch/arm/include/asm/arch-s3c64xx/s3c6400.h
+++ b/arch/arm/include/asm/arch-s3c64xx/s3c6400.h
@@ -471,14 +471,6 @@
  */
 #define ELFIN_SROM_BASE		0x70000000
 
-#define SROM_BW_REG	__REG(ELFIN_SROM_BASE + 0x0)
-#define SROM_BC0_REG	__REG(ELFIN_SROM_BASE + 0x4)
-#define SROM_BC1_REG	__REG(ELFIN_SROM_BASE + 0x8)
-#define SROM_BC2_REG	__REG(ELFIN_SROM_BASE + 0xC)
-#define SROM_BC3_REG	__REG(ELFIN_SROM_BASE + 0x10)
-#define SROM_BC4_REG	__REG(ELFIN_SROM_BASE + 0x14)
-#define SROM_BC5_REG	__REG(ELFIN_SROM_BASE + 0x18)
-
 /*
  * SDRAM Controller
  */
@@ -721,6 +713,11 @@ static inline unsigned int s3c64xx_get_base_timer(void)
 {
 	return ELFIN_TIMER_BASE;
 }
+
+static inline unsigned int s3c64xx_get_base_sromc(void)
+{
+	return ELFIN_SROM_BASE;
+}
 #endif
 
 #endif /*__S3C6400_H__*/
diff --git a/arch/arm/include/asm/arch-s3c64xx/sromc.h b/arch/arm/include/asm/arch-s3c64xx/sromc.h
new file mode 100644
index 0000000..fcad635
--- /dev/null
+++ b/arch/arm/include/asm/arch-s3c64xx/sromc.h
@@ -0,0 +1,49 @@
+/*
+ * (C) Copyright 2012
+ * Zhong Hongbo <bocui107 at gmail.com>
+ *
+ * base on arch/arm/include/asm/arch-s5pc1xx/sromc.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_SROMC_H_
+#define __ASM_ARCH_SROMC_H_
+
+#define SROMC_DATA16_WIDTH(x)    (1 << ((x * 4) + 0))
+#define SROMC_BYTE_ADDR_MODE(x)  (1 << ((x * 4) + 1))
+#define SROMC_WAIT_ENABLE(x)     (1 << ((x * 4) + 2))
+#define SROMC_BYTE_ENABLE(x)     (1 << ((x * 4) + 3))
+
+#define SROMC_BC_TACS(x) (x << 28) /* 0clk     address set-up */
+#define SROMC_BC_TCOS(x) (x << 24) /* 4clk     chip selection set-up */
+#define SROMC_BC_TACC(x) (x << 16) /* 14clk    access cycle */
+#define SROMC_BC_TCOH(x) (x << 12) /* 1clk     chip selection hold */
+#define SROMC_BC_TAH(x)  (x << 8)  /* 4clk     address holding time */
+#define SROMC_BC_TACP(x) (x << 4)  /* 6clk     page mode access cycle */
+#define SROMC_BC_PMC(x)  (x << 0)  /* normal(1data)page mode configuration */
+
+#ifndef __ASSEMBLY__
+struct s3c64xx_sromc {
+	unsigned int	bw;
+	unsigned int	bc[6];
+};
+#endif	/* __ASSEMBLY__ */
+
+/* Configure the Band Width and Bank Control Regs for required SROMC Bank */
+void s3c64xx_config_sromc(u32 srom_bank, u32 srom_bw_conf, u32 srom_bc_conf);
+
+#endif /* __ASM_ARCH_SROMC_H_ */
diff --git a/board/samsung/smdk6400/smdk6400.c b/board/samsung/smdk6400/smdk6400.c
index c40d1f9..be0e18b 100644
--- a/board/samsung/smdk6400/smdk6400.c
+++ b/board/samsung/smdk6400/smdk6400.c
@@ -30,6 +30,7 @@
 
 #include <common.h>
 #include <netdev.h>
+#include <asm/arch/sromc.h>
 #include <asm/arch/s3c6400.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -53,25 +54,40 @@ static inline void delay(unsigned long loops)
 /*
  * Miscellaneous platform dependent initialisations
  */
-
+#ifdef CONFIG_CS8900
 static void cs8900_pre_init(void)
 {
-	SROM_BW_REG &= ~(0xf << 4);
-	SROM_BW_REG |= (1 << 7) | (1 << 6) | (1 << 4);
-	SROM_BC1_REG = ((CS8900_Tacs << 28) + (CS8900_Tcos << 24) +
-			(CS8900_Tacc << 16) + (CS8900_Tcoh << 12) +
-			(CS8900_Tah << 8) + (CS8900_Tacp << 4) + CS8900_PMC);
+	u32 smc_bw_conf, smc_bc_conf;
+
+	/* Ethernet needs bus width of 16 bits */
+	smc_bw_conf = SROMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK)
+			| SROMC_WAIT_ENABLE(CONFIG_ENV_SROM_BANK)
+			| SROMC_BYTE_ENABLE(CONFIG_ENV_SROM_BANK);
+	smc_bc_conf = SROMC_BC_TACS(CS8900_Tacs)
+			| SROMC_BC_TCOS(CS8900_Tcos)
+			| SROMC_BC_TACC(CS8900_Tacc)
+			| SROMC_BC_TCOH(CS8900_Tcoh)
+			| SROMC_BC_TAH(CS8900_Tah)
+			| SROMC_BC_TACP(CS8900_Tacp)
+			| SROMC_BC_PMC(CS8900_PMC);
+
+	/* Select and configure the SROMC bank */
+	s3c64xx_config_sromc(CONFIG_ENV_SROM_BANK, smc_bw_conf, smc_bc_conf);
+
+}
+#else
+#define cs8900_pre_init() do {} while (0)
+#endif
+
+static void norflash_srom_init(void)
+{
+	u32 smc_bw_conf, smc_bc_conf;
 }
 
 int board_init(void)
 {
 	cs8900_pre_init();
 
-	/* NOR-flash in SROM0 */
-
-	/* Enable WAIT */
-	SROM_BW_REG |= 4 | 8 | 1;
-
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 
 	return 0;
diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h
index 2816f93..37fecee 100644
--- a/include/configs/smdk6400.h
+++ b/include/configs/smdk6400.h
@@ -78,6 +78,7 @@
 /*
  * Hardware drivers
  */
+#define CONFIG_ENV_SROM_BANK		2 /* Select SROM Bank-2 for Ethernet*/
 #define CONFIG_CS8900			/* we have a CS8900 on-board	*/
 #define CONFIG_CS8900_BASE	  	0x18800300
 #define CONFIG_CS8900_BUS16		/* follow the Linux driver	*/
-- 
1.7.5.4



More information about the U-Boot mailing list