[U-Boot] [u-boot-arm/next RESEND PATCH 0/3] OMAP3: igep00x0: add nand flash and SPL support

[Javier Martinez Canillas]

On Mon, Jul 30, 2012 at 7:06 PM, Tom Rini <trini at ti.com> wrote:
> On Sat, Jul 28, 2012 at 01:19:31PM +0200, Javier Martinez Canillas wrote:
>
>> IGEP-based boards can have two different flash memories, a OneNAND or a
>> NAND device.
>>
>> Since u-boot still lacks of a device model to be the able to look at
>> run-time which memory type is available on a the board, a built time
>> config option is needed to choose which memory to use.
>>
>> This is a resend of a patch-set that adds both a config option for the
>> nand memory type and SPL support to IGEP-based boards.
>>
>> The patch-set is composed of the following patches:
>>
>> [u-boot-arm/next RESEND PATCH 1/3] OMAP3: igep00x0: Add config
>> [u-boot-arm/next RESEND PATCH 2/3] OMAP3: mem: Add Numonyx OneNAND
>> [u-boot-arm/next RESEND PATCH 3/3] OMAP3: igep00x0: add SPL support
>
> This all looks good, barring comments from someone else, I'll pick this
> up Friday or so.
>
> --
> Tom

Perfect, thanks a lot Tom!

Best regards,
Javier