[U-Boot] [PATCH u-boot-arm/next v3 2/2] OMAP3: igep00x0: add SPL support for IGEP-based boards
Javier Martinez Canillas
javier at dowhile0.org
Thu Jul 19 18:20:51 CEST 2012
This patch adds SPL support for IGEP-based boards.
Tested on an IGEPv2 Rev.C board with Micron NAND Flash memory.
Signed-off-by: Javier Martinez Canillas <javier at dowhile0.org>
---
Changes since v1:
- Set NAND memory 200 Mhz timings when possible as suggested by Thomas Petazzoni
Changes since v2:
- Add Numonyx 200MHz timings as suggested by Enric Balletbo i Serra
arch/arm/include/asm/arch-omap3/mem.h | 29 +++++++++++++++
board/isee/igep0020/config.mk | 33 -----------------
board/isee/igep0020/igep0020.c | 42 +++++++++++++++++++++-
board/isee/igep0030/config.mk | 33 -----------------
board/isee/igep0030/igep0030.c | 42 +++++++++++++++++++++-
include/configs/igep00x0.h | 65 +++++++++++++++++++++++++++++++++
6 files changed, 176 insertions(+), 68 deletions(-)
delete mode 100644 board/isee/igep0020/config.mk
delete mode 100644 board/isee/igep0030/config.mk
diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h
index 9f6992a..12dcf4e 100644
--- a/arch/arm/include/asm/arch-omap3/mem.h
+++ b/arch/arm/include/asm/arch-omap3/mem.h
@@ -294,6 +294,35 @@ enum {
#define NUMONYX_RASWIDTH_165 15
#define NUMONYX_V_MCFG_165(size) MCFG((size), NUMONYX_RASWIDTH_165)
+/* NUMONYX part of IGEP v2 (200MHz optimized) 5 ns */
+#define NUMONYX_TDAL_200 6 /* Twr/Tck + Trp/tck */
+ /* 15/5 + 15/5 = 3 + 3 -> 6 */
+#define NUMONYX_TDPL_200 3 /* 15/5 = 3 -> 3 (Twr) */
+#define NUMONYX_TRRD_200 2 /* 10/5 = 2 */
+#define NUMONYX_TRCD_200 4 /* 16.2/5 = 3.24 -> 4 */
+#define NUMONYX_TRP_200 3 /* 15/5 = 3 */
+#define NUMONYX_TRAS_200 8 /* 40/5 = 8 */
+#define NUMONYX_TRC_200 11 /* 55/5 = 11 */
+#define NUMONYX_TRFC_200 28 /* 140/5 = 28 */
+
+#define NUMONYX_V_ACTIMA_200 \
+ ACTIM_CTRLA(NUMONYX_TRFC_200, NUMONYX_TRC_200, \
+ NUMONYX_TRAS_200, NUMONYX_TRP_200, \
+ NUMONYX_TRCD_200, NUMONYX_TRRD_200, \
+ NUMONYX_TDPL_200, NUMONYX_TDAL_200)
+
+#define NUMONYX_TWTR_200 2
+#define NUMONYX_TCKE_200 2
+#define NUMONYX_TXP_200 3
+#define NUMONYX_XSR_200 40
+
+#define NUMONYX_V_ACTIMB_200 \
+ ACTIM_CTRLB(NUMONYX_TWTR_200, NUMONYX_TCKE_200, \
+ NUMONYX_TXP_200, NUMONYX_XSR_200)
+
+#define NUMONYX_RASWIDTH_200 15
+#define NUMONYX_V_MCFG_200(size) MCFG((size), NUMONYX_RASWIDTH_200)
+
/*
* GPMC settings -
* Definitions is as per the following format
diff --git a/board/isee/igep0020/config.mk b/board/isee/igep0020/config.mk
deleted file mode 100644
index 7964621..0000000
--- a/board/isee/igep0020/config.mk
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# (C) Copyright 2009
-# ISEE 2007 SL, <www.iseebcn.com>
-#
-# IGEP0020 uses OMAP3 (ARM-CortexA8) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-# Physical Address:
-# 8000'0000 (bank0)
-# A000/0000 (bank1)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80008000
diff --git a/board/isee/igep0020/igep0020.c b/board/isee/igep0020/igep0020.c
index 971e31b..a4d099a 100644
--- a/board/isee/igep0020/igep0020.c
+++ b/board/isee/igep0020/igep0020.c
@@ -58,6 +58,46 @@ int board_init(void)
return 0;
}
+#ifdef CONFIG_SPL_BUILD
+/*
+ * Routine: omap_rev_string
+ * Description: For SPL builds output board rev
+ */
+void omap_rev_string(void)
+{
+}
+
+/*
+ * Routine: get_board_mem_timings
+ * Description: If we use SPL then there is no x-loader nor config header
+ * so we have to setup the DDR timings ourself on both banks.
+ */
+void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl,
+ u32 *mr)
+{
+ *mr = MICRON_V_MR_165;
+#ifdef CONFIG_BOOT_NAND
+ *mcfg = MICRON_V_MCFG_200(512 << 20);
+ *ctrla = MICRON_V_ACTIMA_200;
+ *ctrlb = MICRON_V_ACTIMB_200;
+ *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
+#else
+ if (get_cpu_family() == CPU_OMAP34XX) {
+ *mcfg = NUMONYX_V_MCFG_165(512 << 20);
+ *ctrla = NUMONYX_V_ACTIMA_165;
+ *ctrlb = NUMONYX_V_ACTIMB_165;
+ *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+
+ } else {
+ *mcfg = NUMONYX_V_MCFG_200(512 << 20);
+ *ctrla = NUMONYX_V_ACTIMA_200;
+ *ctrlb = NUMONYX_V_ACTIMB_200;
+ *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
+ }
+#endif
+}
+#endif
+
/*
* Routine: setup_net_chip
* Description: Setting up the configuration GPMC registers specific to the
@@ -91,7 +131,7 @@ static void setup_net_chip(void)
}
#endif
-#ifdef CONFIG_GENERIC_MMC
+#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
omap_mmc_init(0, 0, 0);
diff --git a/board/isee/igep0030/config.mk b/board/isee/igep0030/config.mk
deleted file mode 100644
index 059a878..0000000
--- a/board/isee/igep0030/config.mk
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# (C) Copyright 2009
-# ISEE 2007 SL, <www.iseebcn.com>
-#
-# IGEP0030 uses OMAP3 (ARM-CortexA8) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-# Physical Address:
-# 8000'0000 (bank0)
-# A000/0000 (bank1)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80008000
diff --git a/board/isee/igep0030/igep0030.c b/board/isee/igep0030/igep0030.c
index 653c1b5..4f8b645 100644
--- a/board/isee/igep0030/igep0030.c
+++ b/board/isee/igep0030/igep0030.c
@@ -45,7 +45,47 @@ int board_init(void)
return 0;
}
-#ifdef CONFIG_GENERIC_MMC
+#ifdef CONFIG_SPL_BUILD
+/*
+ * Routine: omap_rev_string
+ * Description: For SPL builds output board rev
+ */
+void omap_rev_string(void)
+{
+}
+
+/*
+ * Routine: get_board_mem_timings
+ * Description: If we use SPL then there is no x-loader nor config header
+ * so we have to setup the DDR timings ourself on both banks.
+ */
+void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl,
+ u32 *mr)
+{
+ *mr = MICRON_V_MR_165;
+#ifdef CONFIG_BOOT_NAND
+ *mcfg = MICRON_V_MCFG_200(512 << 20);
+ *ctrla = MICRON_V_ACTIMA_200;
+ *ctrlb = MICRON_V_ACTIMB_200;
+ *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
+#else
+ if (get_cpu_family() == CPU_OMAP34XX) {
+ *mcfg = NUMONYX_V_MCFG_165(512 << 20);
+ *ctrla = NUMONYX_V_ACTIMA_165;
+ *ctrlb = NUMONYX_V_ACTIMB_165;
+ *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+
+ } else {
+ *mcfg = NUMONYX_V_MCFG_200(512 << 20);
+ *ctrla = NUMONYX_V_ACTIMA_200;
+ *ctrlb = NUMONYX_V_ACTIMB_200;
+ *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz;
+ }
+#endif
+}
+#endif
+
+#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
omap_mmc_init(0, 0, 0);
diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h
index d8e87c3..91e5de6 100644
--- a/include/configs/igep00x0.h
+++ b/include/configs/igep00x0.h
@@ -287,6 +287,11 @@
#define CONFIG_SMC911X_BASE 0x2C000000
#endif /* (CONFIG_CMD_NET) */
+/*
+ * Leave it at 0x80008000 to allow booting new u-boot.bin with X-loader
+ * and older u-boot.bin with the new U-Boot SPL.
+ */
+#define CONFIG_SYS_TEXT_BASE 0x80008000
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
#define CONFIG_SYS_INIT_RAM_SIZE 0x800
@@ -294,4 +299,64 @@
CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
+/* SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_NAND_SIMPLE
+#define CONFIG_SPL_TEXT_BASE 0x40200800
+#define CONFIG_SPL_MAX_SIZE (54 * 1024)
+#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
+
+/* move malloc and bss high to prevent clashing with the main image */
+#define CONFIG_SYS_SPL_MALLOC_START 0x87000000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
+#define CONFIG_SPL_BSS_START_ADDR 0x87080000 /* end of minimum RAM */
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
+
+/* MMC boot config */
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#define CONFIG_SPL_POWER_SUPPORT
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+#ifdef CONFIG_BOOT_ONENAND
+#define CONFIG_SPL_ONENAND_SUPPORT
+
+/* OneNAND boot config */
+#define CONFIG_SYS_ONENAND_U_BOOT_OFFS 0x80000
+#define CONFIG_SYS_ONENAND_PAGE_SIZE 2048
+#define CONFIG_SPL_ONENAND_LOAD_ADDR 0x80000
+#define CONFIG_SPL_ONENAND_LOAD_SIZE \
+ (512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)
+
+#endif
+
+#ifdef CONFIG_BOOT_NAND
+#define CONFIG_SPL_NAND_SUPPORT
+
+/* NAND boot config */
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_COUNT 64
+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
+#define CONFIG_SYS_NAND_OOBSIZE 64
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
+#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
+ 10, 11, 12, 13}
+#define CONFIG_SYS_NAND_ECCSIZE 512
+#define CONFIG_SYS_NAND_ECCBYTES 3
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
+#endif
+
#endif /* __IGEP00X0_H */
--
1.7.7.6
More information about the U-Boot
mailing list