[U-Boot] [PATCH v2 02/14] arm/km: add kmcoge5un board support

[Prafulla Wadaskar]

Dear Holger

> -----Original Message-----
> From: Holger Brunck [mailto:holger.brunck at keymile.com]
> Sent: 13 June 2012 19:03
> To: u-boot at lists.denx.de
> Cc: Holger Brunck; Valentin Longchamp; Prafulla Wadaskar; Thomas
> Herzmann
> Subject: [PATCH v2 02/14] arm/km: add kmcoge5un board support
> 
> For u-boot this board is similar to mgcoge3un. But some differences
> are present. We have a different SDRAM on it and therefore a new
> SDRAM config file. Additionaly this board has a direct MAC/MAC
> connection from the kirkwood to a marvell simple switch without a
> phy inbetween, this needs a new configuration for the mvgbe driver.
> The testpin was inverted compared to other km_kirkwood boards, this
> is the reason we need the change in post_hotkeys_pressed.
> 
> Signed-off-by: Holger Brunck <holger.brunck at keymile.com>
> Signed-off-by: Valentin Longchamp <valentin.longchamp at keymile.com>
> cc: Prafulla Wadaskar <prafulla at marvell.com>
> 
> Signed-off-by: Thomas Herzmann <thomas.herzmann at keymile.com>
> Signed-off-by: Holger Brunck <holger.brunck at keymile.com>
> ---
> changes for v2:
>  - rename KMCOGE5UN to KM_COGE5UN
>  - rename 256M8-1.cfg -> kwbimage_256M8_1.cfg
>  - squash 17/20 arm/km: fix testpin detection for kmcoge5un into this
>    commit because it should come with the board support patch
> 
>  MAINTAINERS                               |    1 +
>  board/keymile/km_arm/km_arm.c             |    4 +
>  board/keymile/km_arm/kwbimage_256M8_1.cfg |  296
> +++++++++++++++++++++++++++++

There is anther file coming in patch 01/14 i.e.
board/keymile/km_arm/kwbimage_128M16_1.cfg |  296 ++++++++++++++++++++++++++++

I think the change is only RAM size supported, this must be effectively managed using post-configuration in the function
board_early_init_f()

Regards..
Prafulla . . .