[U-Boot] mx28evk kernel does not boot with 2012.07-rc3

[Marek Vasut]

Dear Fabio Estevam,

> Hi,
> 
> I have just tried the latest U-boot and I am getting the following
> when trying to load today's linux-next:
[...]

I just tested stock u-boot/master ... (it is annoying and slooooooow, since it 
doesn't have a huge pile of patches I plan to push into -next ;-) ) ... but it 
works. So it's a problem with the EVK.

U-Boot 2012.07-rc3-00001-gd592802 (Jul 28 2012 - 01:18:16)

Freescale i.MX28 family at 454 MHz
BOOT:  SSP SD/MMC #0, 3V3
I2C:   ready
DRAM:  128 MiB
NAND:  256 MiB
MMC:   MXS MMC: 0
In:    serial
Out:   serial
Err:   serial
Net:   FEC0 [PRIME], FEC1
Hit any key to stop autoboot:  0 
=> 
=> boot
Using FEC0 device
TFTP from server 192.168.1.1; our IP address is 192.168.1.60
Filename 'imx28-m28evk.dtb'.
Load address: 0x41000000
Loading: ####
done
Bytes transferred = 15874 (3e02 hex)
Using FEC0 device
TFTP from server 192.168.1.1; our IP address is 192.168.1.60
Filename 'uImage'.
Load address: 0x42000000
Loading: T #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ##############################
done
Bytes transferred = 3147744 (3007e0 hex)
## Booting kernel from Legacy Image at 42000000 ...
   Image Name:   Linux-3.5.0-next-20120723-00021-
   Created:      2012-07-27  18:21:30 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3147680 Bytes = 3 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 41000000
   Booting using the fdt blob at 0x41000000
   Loading Kernel Image ... OK
OK
   Loading Device Tree to 47b4e000, end 47b54e01 ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.5.0-next-20120723-00021-g186fab7-dirty 
(root at mashiro) (gcc version 4.7.1 (Debian 4.7.1-3) ) #19022
[    0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: Freescale i.MX28 (Device Tree), model: DENX M28EVK

btw. now "they" know my ip address range ;-D

Best regards,
Marek Vasut