[U-Boot] U-boot failed

[Zeyad A]

Hello,

Please help me to configure u-boot in my NC600 board. I have reached near
to u-boot, but the kernel is not booting. After the kernel image upload via
serial boot mode it is giving no response. If the kernel image upload
become complete it is not giving any command line in the u-boot as shown in
the guide. The memory is not getting flashed. It is again booting the same
old windows CE in the nand boot mode.
Kindly provide me a little support for configuring u-boot.

Thanking you,
Regards
-- 
Seyad A
Tech support
Telenova Networks
Cochin-India
+918129099774
www.telenovanetworks.com
support at telenovanetworks.com