June 2012 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri Jun 1 00:24:41 CEST 2012
Ending: Sat Jun 30 21:28:19 CEST 2012
Messages: 1732

• [U-Boot] [PATCH 7/9] mxc_i2c: Allow MX6Q I2C3 to work   Troy Kisky
  • [U-Boot] [PATCH 7/9] mxc_i2c: Allow MX6Q I2C3 to work   Fabio Estevam
    • [U-Boot] [PATCH 7/9] mxc_i2c: Allow MX6Q I2C3 to work   Dirk Behme
    • [U-Boot] [PATCH 1/2] tegra: add alternate UART1 funcmux entry   Simon Glass
• [U-Boot] [PATCH v3 1/5] kirkwood: add save functionality kirkwood_mpp_conf function   Luka Perkov
  • [U-Boot] [PATCH v3 1/5] kirkwood: add save functionality kirkwood_mpp_conf function   Valentin Longchamp
    • [U-Boot] [PATCH v3 1/5] kirkwood: add save functionality kirkwood_mpp_conf function   Prafulla Wadaskar
    • [U-Boot] [PATCH v4 1/5] kirkwood: add save functionality kirkwood_mpp_conf function   Valentin Longchamp
    • [U-Boot] [PATCH v4 1/5] kirkwood: add save functionality kirkwood_mpp_conf function   Prafulla Wadaskar
    • [U-Boot] [PATCH v4 0/5] kirkwood spi_claim/release_bus support   Valentin Longchamp
    • [U-Boot] [PATCH v4 1/5] kirkwood: add save functionality kirkwood_mpp_conf function   Valentin Longchamp
    • [U-Boot] [PATCH v4 2/5] kirkwood: fix calls to kirkwood_mpp_conf   Valentin Longchamp
    • [U-Boot] [PATCH v4 3/5] kw_spi: backup and reset the MPP of the chosen CS pin   Valentin Longchamp
    • [U-Boot] [PATCH v4 4/5] kw_spi: support spi_claim/release_bus functions   Valentin Longchamp
    • [U-Boot] [PATCH v4 5/5] kw_spi: add weak functions board_spi_claim/release_bus   Valentin Longchamp
    • [U-Boot] [PATCH v4 5/5] wispy: add weak functions board_spi_claim/release_bus   Prafulla Wadaskar
    • [U-Boot] [PATCH v4 5/5] wispy: add weak functions board_spi_claim/release_bus   Valentin Longchamp
• [U-Boot] [PATCH v7 4/4] Kirkwood: add lschlv2 and lsxhl board support   Luka Perkov
  • [U-Boot] [PATCH v7 4/4] Kirkwood: add lschlv2 and lsxhl board support   Michael Walle
    • [U-Boot] [PATCH v7 4/4] Kirkwood: add lschlv2 and lsxhl board support   Luka Perkov
• [U-Boot] [PATCH V2] tegra: Whistler board support   Simon Glass
  • [U-Boot] [PATCH 3/4] tegra: whistler: reduce and comment network cfg options   Simon Glass
    • [U-Boot] [PATCH 4/4] tegra: seaboard: add support for USB networking   Simon Glass
    • [U-Boot] [PATCH V2 2/2] spi: Tegra2: Seaboard: enable SPI/UART corruption fix   Simon Glass
• [U-Boot] [PATCH] tegra: add UART1 on GPU funcmux entry   Simon Glass
• [U-Boot] [PATCH 2/4] tegra: flesh out bootcmd   Simon Glass
• [U-Boot] [PATCH V2 1/4] tegra: remove some cruft from CONFIG_EXTRA_ENV_SETTINGS   Simon Glass
  • [U-Boot] [PATCH V2 2/4] tegra: flesh out bootcmd   Simon Glass
• [U-Boot] [PATCH] spi: tegra2: rename tegra2_spi.* to tegra_spi.*   Simon Glass
• [U-Boot] [PATCH V3 2/2] tegra: seaboard: add support for USB networking   Simon Glass
  • [U-Boot] [PATCH V3 1/2] tegra: whistler: reduce and comment network cfg options   Simon Glass
  • [U-Boot] [PATCH 1/2] tegra: add SDMMC1 on SDIO1 funcmux entry   Simon Glass
• [U-Boot] [PATCH V3 1/2] Add env vars describing U-Boot target board   Simon Glass
  • [U-Boot] [PATCH V3 2/2] tegra: enable CONFIG_ENV_VARS_UBOOT_CONFIG   Simon Glass
• [U-Boot] [PATCH 7/7] tegra: seaboard: disable SPI, move environment to eMMC   Simon Glass
  • [U-Boot] [PATCH 7/7] tegra: seaboard: disable SPI, move environment to eMMC   Stephen Warren
    • [U-Boot] [PATCH 7/7] tegra: seaboard: disable SPI, move environment to eMMC   Simon Glass
    • [U-Boot] facing issues with malloc in U-Boot   Graeme Russ
      • [U-Boot] facing issues with malloc in U-Boot   Sandeep Kumar
      • [U-Boot] facing issues with malloc in U-Boot   Graeme Russ
      • [U-Boot] facing issues with malloc in U-Boot   Sandeep Kumar
  • [U-Boot] [PATCH] mmc: tegra2: rename tegra2_mmc.* to tegra_mmc.*   Simon Glass
  • [U-Boot] [PATCH 1/2] exynos5: pinmux: Added default pinumx settings   Simon Glass
    • [U-Boot] [PATCH 1/2] exynos5: pinmux: Added default pinumx settings   Simon Glass
      • [U-Boot] [PATCH 1/2] exynos5: pinmux: Added default pinumx settings   Rajeshwari Birje
  • [U-Boot] [PATCH 2/2] exynos: smdk5250: Enable the pinmux setup   Simon Glass
  • [U-Boot] [PATCH 1/8] EXYNOS: CLK: Add i2c clock   Simon Glass
  • [U-Boot] [PATCH 2/8] EXYNOS: Add I2C base address.   Simon Glass
• [U-Boot] [PATCH 3/8] EXYNOS: PINMUX: Add pinmux support for I2C   Simon Glass
• [U-Boot] [PATCH 4/8] I2C: Move struct s3c24x0_i2c to a common place.   Simon Glass
• [U-Boot] [PATCH 5/8] I2C: S3C24X0: Add offset to calculate next i2c channel base address   Simon Glass
  • [U-Boot] [PATCH 6/8] I2C: Modify the I2C driver for EXYNOS5   Simon Glass
    • [U-Boot] [PATCH 6/8] I2C: Modify the I2C driver for EXYNOS5   Rajeshwari Birje
  • [U-Boot] [PATCH 7/8] I2C: Add support for Multi channel   Simon Glass
• [U-Boot] [PATCH 8/8] CONFIG: SMDK5250: I2C: Enable I2C   Simon Glass
  • [U-Boot] [PATCH 2/2 V2] EXYNOS: SMDK5250: Enable the pinmux setup   Simon Glass
• [U-Boot] [PATCH 1/2 V2] PMIC: MAX77686: Add support for MAX77686   Simon Glass
• [U-Boot] [PATCH 2/2 V2] PMIC: SMDK5250: Enable MAX77686 pmic chip   Simon Glass
  • [U-Boot] [PATCH 1/4] EXYNOS: MSHCI: Add clock for EXYNOS5   Simon Glass
    • [U-Boot] [PATCH 2/4] EXYNOS5: PINMUX: Add pinmux for SDMMC4   Simon Glass
    • [U-Boot] [PATCH 2/4] EXYNOS5: PINMUX: Add pinmux for SDMMC4   Rajeshwari Birje
    • [U-Boot] [PATCH 2/4] EXYNOS5: PINMUX: Add pinmux for SDMMC4   Simon Glass
  • [U-Boot] [PATCH 3/4] EXYNOS: Add base address for MSHCI   Simon Glass
    • [U-Boot] [PATCH 4/4] EXYNOS5: Enable support for MSHCI   Simon Glass
  • [U-Boot] [PATCH 1/2 V2] EXYNOS5: PINMUX: Added default pinumx settings   Simon Glass
    • [U-Boot] [PATCH 1/2 V2] EXYNOS5: PINMUX: Added default pinumx settings   Minkyu Kang
      • [U-Boot] [PATCH 1/2 V2] EXYNOS5: PINMUX: Added default pinumx settings   Rajeshwari Birje
      • [U-Boot] [PATCH 1/2 V2] EXYNOS5: PINMUX: Added default pinumx settings   Simon Glass
    • [U-Boot] [PATCH] gpio: tegra2: rename tegra2_gpio.* to tegra_gpio.*   Simon Glass
• [U-Boot] problem while making kernel up   Manukumar
• [U-Boot] [PATCH V5 RESEND 0/3] mtd/NAND: Support for FSMC controller   Amit Virdi
  • [U-Boot] [PATCH V5 RESEND 0/3] mtd/NAND: Support for FSMC controller   Stefan Roese
• [U-Boot] [PATCH V5 RESEND 0/3] mtd/NAND: Support for FSMC controller   Stefan Roese
• [U-Boot] [PATCH] tegra: trimslice: fix a couple typos   Igor Grinberg
  • [U-Boot] [PATCH] tegra: trimslice: fix a couple typos   Stephen Warren
    • [U-Boot] [PATCH] tegra: trimslice: fix a couple typos   Marek Vasut
      • [U-Boot] [PATCH] tegra: trimslice: fix a couple typos   Igor Grinberg
• [U-Boot] [PATCH V2] tegra: Compulab TrimSlice board support   Igor Grinberg
  • [U-Boot] [PATCH v7 4/4] Kirkwood: add lschlv2 and lsxhl board support   Prafulla Wadaskar
  • [U-Boot] [PATCH] Kirkwood: Add support for Ka-Ro TK71   Prafulla Wadaskar
    • [U-Boot] [PATCH] Kirkwood: Add support for Ka-Ro TK71   Marek Vasut
      • [U-Boot] [PATCH] Kirkwood: Add support for Ka-Ro TK71   Valentin Longchamp
      • [U-Boot] [PATCH] Kirkwood: Add support for Ka-Ro TK71   Prafulla Wadaskar
      • [U-Boot] [PATCH] Kirkwood: Add support for Ka-Ro TK71   Holger Brunck
      • [U-Boot] [PATCH] Kirkwood: Add support for Ka-Ro TK71   Prafulla Wadaskar
  • [U-Boot] [PATCH v7 4/4] Kirkwood: add lschlv2 and lsxhl board support   Prafulla Wadaskar
• [U-Boot] mx28 battery support   alex
  • [U-Boot] mx28 battery support   Marek Vasut
• [U-Boot] [PATCH] arm: AT91: add at91sam9x5ek board support   Bo Shen
• [U-Boot] [PATCH v3] ATMEL/PIO: Enable new feature of PIO on Atmel device   Bo Shen
  • [U-Boot] [PATCH v3] ATMEL/PIO: Enable new feature of PIO on Atmel device   Bo Shen
    • [U-Boot] [PATCH] Consolidate bootcount code into drivers/bootcount   Stefan Roese
    • [U-Boot] [PATCH] Consolidate bootcount code into drivers/bootcount   Christian Riesch
    • [U-Boot] [PATCH] Consolidate bootcount code into drivers/bootcount   Stefan Roese
• [U-Boot] problem while making kernel up   Manukumar
  • [U-Boot] problem while making kernel up   Scott Wood
    • [U-Boot] problem while making kernel up   Manukumar
      • [U-Boot] [PATCH 1/2 V3] EXYNOS5: PINMUX: Added default pinumx settings   Rajeshwari Shinde
      • [U-Boot] [PATCH 2/2 V3] EXYNOS: SMDK5250: Enable the pinmux setup   Rajeshwari Shinde
      • [U-Boot] [PATCH 1/2 V4] EXYNOS5: PINMUX: Added default pinumx settings   Rajeshwari Shinde
      • [U-Boot] [PATCH 2/2 V4] EXYNOS: SMDK5250: Enable the pinmux setup   Rajeshwari Shinde
      • [U-Boot] [PATCH 1/2 V4] EXYNOS5: PINMUX: Added default pinumx settings   Simon Glass
• [U-Boot] [PATCH] net: Multiple updates/enhancements to designware.c   Stefan Roese
  • [U-Boot] [PATCH] net: Multiple updates/enhancements to designware.c   Joe Hershberger
  • [U-Boot] Sources for Ikanos VX160 here   Benjamin Henrion
    • [U-Boot] [PATCH] da850/omap-l138: Enable auto negotiation in RMII mode   Prabhakar Lad
    • [U-Boot] [PATCH] da850/omap-l138: Enable auto negotiation in RMII mode   Tom Rini
    • [U-Boot] [PATCH] da850/omap-l138: Enable auto negotiation in RMII mode   Lad, Prabhakar
    • [U-Boot] [PATCH] da850/omap-l138: Enable auto negotiation in RMII mode   Christian Riesch
    • [U-Boot] [PATCH] da850/omap-l138: Enable auto negotiation in RMII mode   Lad, Prabhakar
    • [U-Boot] [PATCH] da850/omap-l138: Enable auto negotiation in RMII mode   Eric Bénard
    • [U-Boot] [PATCH] da850/omap-l138: Enable auto negotiation in RMII mode   Lad, Prabhakar
    • [U-Boot] [PATCH] da850/omap-l138: enable SPI flash in RMII mode   Prabhakar Lad
    • [U-Boot] [PATCH] da850/omap-l138: enable SPI flash in RMII mode   Christian Riesch
    • [U-Boot] [PATCH] da850/omap-l138: enable SPI flash in RMII mode   Lad, Prabhakar
    • [U-Boot] [PATCH 0/7] feature additions and fixes for da850/omap-l138   Prabhakar Lad
    • [U-Boot] [PATCH 1/7] da850/omap-l138: Add MMC support for DA850/OMAP-L138   Prabhakar Lad
    • [U-Boot] [PATCH 1/7] da850/omap-l138: Add MMC support for DA850/OMAP-L138   Tom Rini
    • [U-Boot] [PATCH 1/7] da850/omap-l138: Add MMC support for DA850/OMAP-L138   Lad, Prabhakar
    • [U-Boot] [PATCH 1/7] da850/omap-l138: Add MMC support for DA850/OMAP-L138   Christian Riesch
    • [U-Boot] [PATCH 1/7] da850/omap-l138: Add MMC support for DA850/OMAP-L138   Lad, Prabhakar
    • [U-Boot] [PATCH 2/7] da850/omap-l138: modifications for Logic PD Rev.3 AM18xx EVM   Prabhakar Lad
    • [U-Boot] [PATCH 3/7] da850/omap-l138: Add support to read u-boot image from MMC/SD   Prabhakar Lad
    • [U-Boot] [PATCH 4/7] da850/omap-l138: Make MMC and NOR support mutually exclusive   Prabhakar Lad
    • [U-Boot] [PATCH 5/7] da850/omap-l138: Fix NAND flash timings   Prabhakar Lad
    • [U-Boot] [PATCH 6/7] da850/omap-l138: Add support for NAND SPL   Prabhakar Lad
    • [U-Boot] [PATCH 6/7] da850/omap-l138: Add support for NAND SPL   Christian Riesch
    • [U-Boot] [PATCH 6/7] da850/omap-l138: Add support for NAND SPL   Lad, Prabhakar
    • [U-Boot] [PATCH 7/7] da850/omap-l138: add support for direct NOR boot mode   Prabhakar Lad
    • [U-Boot] [PATCH 7/7] da850/omap-l138: add support for direct NOR boot mode   Tom Rini
    • [U-Boot] [PATCH 7/7] da850/omap-l138: add support for direct NOR boot mode   Lad, Prabhakar
• [U-Boot] patchwork cleanup   Marek Vasut
• [U-Boot] [GIT PULL RESEND] ext2load speedup   Jason Cooper
  • [U-Boot] [PATCH v2] ext2load: increase read speed   Jason Cooper
  • [U-Boot] [PATCH v2] ext2load: increase read speed   Wolfgang Denk
  • [U-Boot] [PATCH] mmc: tegra: fix boards that used old CONFIG_TEGRA2_MMC build switch   Tom Warren
  • [U-Boot] [PATCH] mmc: tegra: fix boards that used old CONFIG_TEGRA2_MMC build switch   Stephen Warren
  • [U-Boot] [PATCH] mmc: tegra: fix boards that used old CONFIG_TEGRA2_MMC build switch   Tom Warren
  • [U-Boot] [PATCH] mmc: tegra: fix boards that used old CONFIG_TEGRA2_MMC build switch   Stephen Warren
  • [U-Boot] [PATCH V2] tegra: fix leftover CONFIG_TEGRA2_MMC & _SPI build switches   Tom Warren
  • [U-Boot] [PATCH V2] tegra: fix leftover CONFIG_TEGRA2_MMC & _SPI build switches   Stephen Warren
• [U-Boot] [PATCH v2 01/11] arm: Optionally use existing atags in bootm.c   Pali Rohár
• [U-Boot] [PATCH v2 11/11] New board support: Nokia RX-51 aka N900   Pali Rohár
  • [U-Boot] [PATCH v2 11/11] New board support: Nokia RX-51 aka N900   Marek Vasut
    • [U-Boot] [PATCH v2 11/11] New board support: Nokia RX-51 aka N900   Pali Rohár
      • [U-Boot] [PATCH v2 11/11] New board support: Nokia RX-51 aka N900   Marek Vasut
• [U-Boot] [PATCH v2 03/11] cfb_console: Fix function console_back   Pali Rohár
  • [U-Boot] [PATCH v2 03/11] cfb_console: Fix function console_back   Anatolij Gustschin
    • [U-Boot] [PATCH v8 0/4] Kirkwood: add lschlv2 and lsxhl board support   Michael Walle
    • [U-Boot] [PATCH v8 1/4] lib: add rand() function   Michael Walle
    • [U-Boot] [PATCH v8 2/4] net: use common rand()/srand() functions   Michael Walle
    • [U-Boot] [PATCH v8 2/4] net: use common rand()/srand() functions   Joe Hershberger
    • [U-Boot] [PATCH v8 4/4] Kirkwood: add lschlv2 and lsxhl board support   Michael Walle
    • [U-Boot] [PATCH v8 0/4] Kirkwood: add lschlv2 and lsxhl board support   Michael Walle
    • [U-Boot] [PATCH v8 0/4] Kirkwood: add lschlv2 and lsxhl board support   Prafulla Wadaskar
    • [U-Boot] [PATCH v8 0/4] Kirkwood: add lschlv2 and lsxhl board support   Joe Hershberger
    • [U-Boot] [PATCH v8 0/4] Kirkwood: add lschlv2 and lsxhl board support   Prafulla Wadaskar
    • [U-Boot] [PATCH v8 3/4] net: add helper to generate random mac address   Michael Walle
• [U-Boot] [PATCH v8] kirkwood: add NAS62x0 board support   Michael Walle
  • [U-Boot] [PATCH v8] kirkwood: add NAS62x0 board support   Luka Perkov
    • [U-Boot] [PATCH v8] kirkwood: add NAS62x0 board support   Marek Vasut
      • [U-Boot] [PATCH v8] kirkwood: add NAS62x0 board support   Luka Perkov
• [U-Boot] [PATCH 9/9] mx6qsabrelite: Add splaschscreen support   Dirk Behme
  • [U-Boot] [PATCH 9/9] mx6qsabrelite: Add splaschscreen support   Fabio Estevam
    • [U-Boot] [PATCH 9/9] mx6qsabrelite: Add splaschscreen support   Dirk Behme
      • [U-Boot] [PATCH 9/9] mx6qsabrelite: Add splaschscreen support   Fabio Estevam
      • [U-Boot] [PATCH 9/9] mx6qsabrelite: Add splaschscreen support   Troy Kisky
      • [U-Boot] [PATCH 9/9] mx6qsabrelite: Add splaschscreen support   Fabio Estevam
• [U-Boot] mxsboot vs. imximage (was: Re: [PATCH 4/8] mxsboot: stop referring to i.MX28 as this ought to work for all i.MXS SoCs)   Dirk Behme
  • [U-Boot] mxsboot vs. imximage (was: Re: [PATCH 4/8] mxsboot: stop referring to i.MX28 as this ought to work for all i.MXS SoCs)   Marek Vasut
• [U-Boot] [PATCH] Added watchdog support for davinchi_dm365evm   Stijn Souffriau
• [U-Boot] [PATCH] Added watchdog support for davinchi_dm365evm   Stijn Souffriau
• [U-Boot] [PATCH] Added u-boot header generating functionality to ublimage   Stijn Souffriau
• [U-Boot] Support for drives larger than 2.1TB with U-Boot & Kirkwood   David Purdy
  • [U-Boot] Support for drives larger than 2.1TB with U-Boot & Kirkwood   Prafulla Wadaskar
    • [U-Boot] [PATCH resend] Added watchdog support for davinchi_dm365evm   Stijn Souffriau
    • [U-Boot] [PATCH resend] Added UBL_MAGIC_PLL number for ublimage + added automatic page size calculation   Stijn Souffriau
    • [U-Boot] [PATCH resend] Added UBL_MAGIC_PLL number for ublimage + added automatic page size calculation   Tom Rini
    • [U-Boot] [PATCH resend] Added watchdog support for davinchi_dm365evm   Tom Rini
    • [U-Boot] [PATCH 1/6] imx31_phycore: Remove CONFIG_SYS_I2C_SLAVE definition   Fabio Estevam
    • [U-Boot] [PATCH 2/6] mx35pdk: Remove CONFIG_SYS_I2C_SLAVE definition   Fabio Estevam
    • [U-Boot] [PATCH 3/6] mx53ard: Remove CONFIG_SYS_I2C_SLAVE definition   Fabio Estevam
    • [U-Boot] [PATCH 4/6] mx53evk: Remove CONFIG_SYS_I2C_SLAVE definition   Fabio Estevam
    • [U-Boot] [PATCH 5/6] mx53loco: Remove CONFIG_SYS_I2C_SLAVE definition   Fabio Estevam
    • [U-Boot] [PATCH 6/6] mx53smd: Remove CONFIG_SYS_I2C_SLAVE definition   Fabio Estevam
    • [U-Boot] [PATCH 1/6] imx31_phycore: Remove CONFIG_SYS_I2C_SLAVE definition   Stefano Babic
    • [U-Boot] (no subject)   Stijn Souffriau
    • [U-Boot] [PATCH resend] Added UBL_MAGIC_PLL number for ublimage + added automatic page size calculation   Stijn Souffriau
• [U-Boot] [PATCH 1/2] menu: Added support to use user defined functions   Marek Vasut
  • [U-Boot] [PATCH 1/2] menu: Added support to use user defined functions   Pali Rohár
    • [U-Boot] [PATCH 1/2] menu: Added support to use user defined functions   Marek Vasut
• [U-Boot] [PATCH 2/2] New command bootmenu: ANSI terminal Boot Menu support   Marek Vasut
  • [U-Boot] [PATCH 2/2] New command bootmenu: ANSI terminal Boot Menu support   Luka Perkov
    • [U-Boot] [PATCH 2/2] New command bootmenu: ANSI terminal Boot Menu support   Marek Vasut
      • [U-Boot] [PATCH 2/2] New command bootmenu: ANSI terminal Boot Menu support   Luka Perkov
• [U-Boot] [PATCH] fix IDE_BUS(dev) macro   Vágó Tibor
• [U-Boot] [PATCH] fix IDE_BUS(dev) macro   Vágó Tibor
  • [U-Boot] [PATCH] fix IDE_BUS(dev) macro   Luka Perkov
• [U-Boot] [PATCH] fix IDE_BUS(dev) macro   Rogan Dawes
  • [U-Boot] [PATCH] fix IDE_BUS(dev) macro   Luka Perkov
    • [U-Boot] [PATCH] MIPS: bootm.c: make checkpatch.pl clean   Daniel Schwierzeck
    • [U-Boot] [PATCH] MIPS: bootm_qemu_mips.c: make checkpatch.pl clean   Daniel Schwierzeck
    • [U-Boot] [PATCH] MIPS: board.c: move extern declarations to u-boot-mips.h   Daniel Schwierzeck
    • [U-Boot] [GIT PULL] u-boot-mips/master   Daniel Schwierzeck
    • [U-Boot] [GIT PULL] u-boot-mips/master   Wolfgang Denk
    • [U-Boot] [PATCH] malloc: remove extern declarations of malloc_bin_reloc() in board.c files   Daniel Schwierzeck
    • [U-Boot] [PATCH] malloc: remove extern declarations of malloc_bin_reloc() in board.c files   Andreas Bießmann
• [U-Boot] [PATCH] mmc: fix wrong timeout check in mmc_send_status()   Jongman Heo
  • [U-Boot] [PATCH] mmc: fix wrong timeout check in mmc_send_status()   Graeme Russ
    • [U-Boot] [PATCH v2 4/7] tegra: Allow boards to perform early GPIO setup   Thierry Reding
      • [U-Boot] [PATCH v2 4/7] tegra: Allow boards to perform early GPIO setup   Tom Warren
  • [U-Boot] [PATCH v2] mmc: fix wrong timeout check in mmc_send_status()   Jongman Heo
• [U-Boot] [PATCH 2/3] omap: emif: deal with rams that return duplicate mr data on all byte lanes   R, Sricharan
  • [U-Boot] [PATCH 3/3] omap: emif: fix bug in manufacturer code test   R, Sricharan
    • [U-Boot] [PATCH] powerpc/CoreNet: add tool to support pbl image build.   Shaohui Xie
    • [U-Boot] [PATCH] powerpc/CoreNet: add tool to support pbl image build.   Scott Wood
    • [U-Boot] [PATCH] powerpc/CoreNet: add tool to support pbl image build.   Xie Shaohui-B21989
    • [U-Boot] [PATCH] powerpc/CoreNet: add tool to support pbl image build.   Scott Wood
    • [U-Boot] [PATCH] powerpc/CoreNet: add tool to support pbl image build.   Xie Shaohui-B21989
    • [U-Boot] [PATCH] powerpc/CoreNet: add tool to support pbl image build.   Scott Wood
    • [U-Boot] [PATCH] powerpc/CoreNet: add tool to support pbl image build.   Xie Shaohui-B21989
    • [U-Boot] [PATCH] powerpc/CoreNet: add tool to support pbl image build.   Scott Wood
    • [U-Boot] [PATCH] powerpc/CoreNet: add tool to support pbl image build.   Xie Shaohui-B21989
    • [U-Boot] [PATCH] powerpc/CoreNet: add tool to support pbl image build.   Scott Wood
    • [U-Boot] [PATCH] powerpc/CoreNet: add tool to support pbl image build.   Tabi Timur-B04825
    • [U-Boot] [PATCH] powerpc/CoreNet: add tool to support pbl image build.   Scott Wood
    • [U-Boot] [PATCH] powerpc/CoreNet: add tool to support pbl image build.   Tabi Timur-B04825
    • [U-Boot] [PATCH 2/2] P4080/PBL: add tool to support pbl image build.   Xie Shaohui-B21989
• [U-Boot] Please pull u-boot-avr32   Andreas Bießmann
  • [U-Boot] Please pull u-boot-avr32   Wolfgang Denk
• [U-Boot] [PATCH 2/2] avr32:board.c: fix compile warning   Andreas Bießmann
  • [U-Boot] [PATCH v2] Consolidate bootcount code into drivers/bootcount   Stefan Roese
  • [U-Boot] [PATCH v2] Consolidate bootcount code into drivers/bootcount   Valentin Longchamp
  • [U-Boot] [PATCH v2] Consolidate bootcount code into drivers/bootcount   Rob Herring
  • [U-Boot] [PATCH v2] Consolidate bootcount code into drivers/bootcount   Stefan Roese
  • [U-Boot] [PATCH v2] Consolidate bootcount code into drivers/bootcount   Christian Riesch
  • [U-Boot] [PATCH v2] Consolidate bootcount code into drivers/bootcount   Stefan Roese
  • [U-Boot] [PATCH v2] Consolidate bootcount code into drivers/bootcount   Christian Riesch
  • [U-Boot] [PATCH] ARM: OMAP4+: Move external phy initialisations to arch specific place.   R Sricharan
  • [U-Boot] [PATCH] ARM: OMAP4+: Move external phy initialisations to arch specific place.   Tom Rini
• [U-Boot] [PATCH 1/3] omap: fix compile error in emif-common.c   R, Sricharan
• [U-Boot] Detecting board revision that needs to be done after relocation   Hebbar, Gururaja
  • [U-Boot] [PATCH] omap: am335x_evm: remove unused definitions   Steve Sakoman
  • [U-Boot] [PATCH] omap: am335x_evm: remove unused definitions   Tom Rini
  • [U-Boot] [PATCH] omap: am335x_evm: remove unused definitions   Tom Rini
  • [U-Boot] [PATCH] omap: am335x_evm: enable i2c1 channel   Steve Sakoman
  • [U-Boot] [PATCH] omap: am335x_evm: enable i2c1 channel   Tom Rini
  • [U-Boot] [PATCH] omap: am33xx: enable gpio support   Steve Sakoman
  • [U-Boot] [PATCH] omap: am33xx: enable gpio support   Tom Rini
  • [U-Boot] [PATCH] OMAP5432: do not apply 5430 non-essential pad-confs to 5432   Sebastien Jan
  • [U-Boot] [PATCH] OMAP5432: do not apply 5430 non-essential pad-confs to 5432   Tom Rini
  • [U-Boot] [PATCH] OMAP5432: do not apply 5430 non-essential pad-confs to 5432   Sricharan R
• [U-Boot] crashed u-boot with MV88F6560   Dawid Partyka - Safe-lock.net
• [U-Boot] crashed u+boot with MV88F6560   Dawid Partyka - Safe-lock.net
• [U-Boot] [PATCH] tegra: override compiler flags for low level init code   Allen Martin
  • [U-Boot] [PATCH] tegra: override compiler flags for low level init code   Stephen Warren
    • [U-Boot] [PATCH] tegra: override compiler flags for low level init code   Allen Martin
      • [U-Boot] [PATCH] tegra: override compiler flags for low level init code   Tom Warren
      • [U-Boot] [PATCH] tegra: add enterrcm command   Stephen Warren
• [U-Boot] [PATCH 1/3] common/cmd_rsmode.c: add imx reset mode command   Wolfgang Denk
  • [U-Boot] [PATCH 1/3] common/cmd_rsmode.c: add imx reset mode command   Troy Kisky
• [U-Boot] [PATCH 1/3] common/cmd_rsmode.c: add imx reset mode command   Wolfgang Denk
  • [U-Boot] [PATCH 1/3] common/cmd_rsmode.c: add imx reset mode command   Eric Nelson
    • [U-Boot] [PATCH 1/3] common/cmd_rsmode.c: add imx reset mode command   Wolfgang Denk
      • [U-Boot] [PATCH 1/3] common/cmd_rsmode.c: add imx reset mode command   Eric Nelson
• [U-Boot] [PATCH v3 05/11] cfb_console: Add console_clear_line function   Anatolij Gustschin
• [U-Boot] [PATCH v3] video: atmel/lcd: add LCD driver for new Atmel SoC   Anatolij Gustschin
  • [U-Boot] [PATCH 1/2] tegra: bootcmd enhancements   Stephen Warren
  • [U-Boot] [PATCH 2/2] tegra: bootcmd: start USB only when needed   Stephen Warren
  • [U-Boot] [PATCH 1/2 V5] EXYNOS5: PINMUX: Added default pinumx settings   Rajeshwari Shinde
  • [U-Boot] [PATCH 2/2 V5] EXYNOS: SMDK5250: Enable the pinmux setup   Rajeshwari Shinde
  • [U-Boot] [PATCH 2/2 V5] EXYNOS: SMDK5250: Enable the pinmux setup   Simon Glass
  • [U-Boot] [PATCH 1/2 V5] EXYNOS5: PINMUX: Added default pinumx settings   Simon Glass
  • [U-Boot] [PATCH v3 1/7] tegra: Rework Tamonten support   Thierry Reding
  • [U-Boot] [PATCH v3 4/7] tegra: Allow boards to perform early GPIO setup   Thierry Reding
  • [U-Boot] [PATCH v3 7/7] tegra: Add Tamonten Evaluation Carrier support   Thierry Reding
  • [U-Boot] [PATCH v3 7/7] tegra: Add Tamonten Evaluation Carrier support   Allen Martin
  • [U-Boot] [PATCH v3 7/7] tegra: Add Tamonten Evaluation Carrier support   Thierry Reding
  • [U-Boot] [PATCH v3 2/7] tegra: medcom: Add device tree support   Thierry Reding
  • [U-Boot] [PATCH v3 3/7] tegra: plutux: Add device tree support   Thierry Reding
  • [U-Boot] [PATCH v3 5/7] tegra: Implement gpio_early_init() on Tamonten   Thierry Reding
  • [U-Boot] [PATCH v3 6/7] tegra: Use SD write-protect GPIO on Tamonten   Thierry Reding
  • [U-Boot] [PATCH v3] Consolidate bootcount code into drivers/bootcount   Stefan Roese
  • [U-Boot] [PATCH v3] Consolidate bootcount code into drivers/bootcount   Rob Herring
• [U-Boot] Please pull u-boot-staging.git/sr at denx.de   Stefan Roese
  • [U-Boot] Please pull u-boot-staging.git/sr at denx.de   Stefan Roese
    • [U-Boot] Please pull u-boot-staging.git/sr at denx.de   Albert ARIBAUD
• [U-Boot] [PATCH] video: cfb_console: flush dcache for frame buffer in DRAM   Anatolij Gustschin
• [U-Boot] [PATCH v2 07/11] cfb_console: Ignore bell character   Anatolij Gustschin
• [U-Boot] U-boot failed   Zeyad A
  • [U-Boot] U-boot failed   Marek Vasut
• [U-Boot] Pull request: u-boot-video/master   Anatolij Gustschin
  • [U-Boot] Pull request: u-boot-video/master   Wolfgang Denk
• [U-Boot] [PATCH 1/5] ARM: cache: Move the cp15 CR register read before flushing the cache.   Sricharan R
  • [U-Boot] [PATCH 1/5] ARM: cache: Move the cp15 CR register read before flushing the cache.   Marek Vasut
    • [U-Boot] [PATCH 1/5] ARM: cache: Move the cp15 CR register read before flushing the cache.   R, Sricharan
      • [U-Boot] [PATCH] arm: enable unaligned access on ARMv7   Lucas Stach
      • [U-Boot] [PATCH] arm: enable unaligned access on ARMv7   Stephen Warren
      • [U-Boot] [PATCH] arm: enable unaligned access on ARMv7   Lucas Stach
      • [U-Boot] [PATCH] arm: enable unaligned access on ARMv7   Albert ARIBAUD
      • [U-Boot] [PATCH] arm: enable unaligned access on ARMv7   Lucas Stach
      • [U-Boot] [PATCH] arm: enable unaligned access on ARMv7   Albert ARIBAUD
      • [U-Boot] [PATCH] arm: enable unaligned access on ARMv7   Lucas Stach
      • [U-Boot] [PATCH] arm: enable unaligned access on ARMv7   Aneesh V
      • [U-Boot] [PATCH] arm: enable unaligned access on ARMv7   Aneesh V
      • [U-Boot] [PATCH] arm: enable unaligned access on ARMv7   Albert ARIBAUD
      • [U-Boot] [PATCH] arm: enable unaligned access on ARMv7   V, Aneesh
      • [U-Boot] [PATCH] arm: enable unaligned access on ARMv7   Albert ARIBAUD
      • [U-Boot] [PATCH] arm: enable unaligned access on ARMv7   Aneesh V
      • [U-Boot] [PATCH] arm: enable unaligned access on ARMv7   Wolfgang Denk
      • [U-Boot] [PATCH] arm: enable unaligned access on ARMv7   Måns Rullgård
      • [U-Boot] [PATCH] arm: enable unaligned access on ARMv7   Lucas Stach
      • [U-Boot] [PATCH] arm: enable unaligned access on ARMv7   Rob Herring
      • [U-Boot] [PATCH] arm: enable unaligned access on ARMv7   Tetsuyuki Kobayashi
      • [U-Boot] [PATCH v2 0/10] split tegra20 arm7 code into separate SPL   Allen Martin
      • [U-Boot] [PATCH v2 01/10] tegra20: rename tegra2 -> tegra20   Allen Martin
      • [U-Boot] [PATCH v2 01/10] tegra20: rename tegra2 -> tegra20   Stephen Warren
      • [U-Boot] [PATCH v2 01/10] tegra20: rename tegra2 -> tegra20   Allen Martin
      • [U-Boot] [PATCH v2 02/10] tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common   Allen Martin
      • [U-Boot] [PATCH v2 02/10] tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common   Stephen Warren
      • [U-Boot] [PATCH v2 02/10] tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common   Allen Martin
      • [U-Boot] [PATCH v2 04/10] ARM: Fix arm720t SPL build   Allen Martin
      • [U-Boot] [PATCH v2 05/10] tegra20: remove timer_init from SPL build   Allen Martin
      • [U-Boot] [PATCH v2 06/10] ARM: add tegra20 support to arm720t   Allen Martin
      • [U-Boot] [PATCH v2 06/10] ARM: add tegra20 support to arm720t   Stephen Warren
      • [U-Boot] [PATCH v2 06/10] ARM: add tegra20 support to arm720t   Allen Martin
      • [U-Boot] [PATCH v2 06/10] ARM: add tegra20 support to arm720t   Stephen Warren
      • [U-Boot] [PATCH v2 06/10] ARM: add tegra20 support to arm720t   Allen Martin
      • [U-Boot] [PATCH v2 06/10] ARM: add tegra20 support to arm720t   Stephen Warren
      • [U-Boot] [PATCH v2 07/10] tegra20: add SPL config options for seaboard   Allen Martin
      • [U-Boot] [PATCH v2 07/10] tegra20: add SPL config options for seaboard   Stephen Warren
      • [U-Boot] [PATCH v2 07/10] tegra20: add SPL config options for seaboard   Allen Martin
      • [U-Boot] [PATCH v2 07/10] tegra20: add SPL config options for seaboard   Sughosh Ganu
      • [U-Boot] [PATCH v2 07/10] tegra20: add SPL config options for seaboard   Stephen Warren
      • [U-Boot] [PATCH v2 07/10] tegra20: add SPL config options for seaboard   Sughosh Ganu
      • [U-Boot] [PATCH v2 07/10] tegra20: add SPL config options for seaboard   Stephen Warren
      • [U-Boot] [PATCH v2 08/10] tegra20: add u-boot.t2 target   Allen Martin
      • [U-Boot] [PATCH v2 08/10] tegra20: add u-boot.t2 target   Stephen Warren
      • [U-Boot] [PATCH v2 08/10] tegra20: add u-boot.t2 target   Allen Martin
      • [U-Boot] [PATCH v2 08/10] tegra20: add u-boot.t2 target   Tom Warren
      • [U-Boot] [PATCH v2 08/10] tegra20: add u-boot.t2 target   Stephen Warren
      • [U-Boot] [PATCH v2 08/10] tegra20: add u-boot.t2 target   Allen Martin
      • [U-Boot] [PATCH v2 08/10] tegra20: add u-boot.t2 target   Stephen Warren
      • [U-Boot] [PATCH v2 08/10] tegra20: add u-boot.t2 target   Allen Martin
      • [U-Boot] [PATCH v2 09/10] tegra20: Remove CPU init code from tegra20 u-boot   Allen Martin
      • [U-Boot] [PATCH v2 09/10] tegra20: Remove CPU init code from tegra20 u-boot   Stephen Warren
      • [U-Boot] [PATCH v2 09/10] tegra20: Remove CPU init code from tegra20 u-boot   Allen Martin
      • [U-Boot] [PATCH v2 10/10] tegra20: Remove armv4t build flags   Allen Martin
      • [U-Boot] [PATCH v2 10/10] tegra20: Remove armv4t build flags   Stephen Warren
      • [U-Boot] [PATCH v2 0/10] split tegra20 arm7 code into separate SPL   Tom Warren
      • [U-Boot] [PATCH v2 0/10] split tegra20 arm7 code into separate SPL   Allen Martin
      • [U-Boot] [PATCH v2 03/10] mkconfig: add support for SPL CPU   Allen Martin
      • [U-Boot] [PATCH v2 03/10] mkconfig: add support for SPL CPU   Stephen Warren
      • [U-Boot] [PATCH v2 03/10] mkconfig: add support for SPL CPU   Allen Martin
      • [U-Boot] [PATCH v9 0/4] Kirkwood: add lschlv2 and lsxhl board support   Michael Walle
      • [U-Boot] [PATCH v9 1/4] lib: add rand() function   Michael Walle
      • [U-Boot] [PATCH v9 2/4] net: use common rand()/srand() functions   Michael Walle
      • [U-Boot] [PATCH v9 3/4] net: add helper to generate random mac address   Michael Walle
      • [U-Boot] [PATCH v9 4/4] Kirkwood: add lschlv2 and lsxhl board support   Michael Walle
      • [U-Boot] [PATCH v9 0/4] Kirkwood: add lschlv2 and lsxhl board support   Michael Walle
      • [U-Boot] [PATCH v9 0/4] Kirkwood: add lschlv2 and lsxhl board support   Joe Hershberger
      • [U-Boot] [PATCH v9 0/4] Kirkwood: add lschlv2 and lsxhl board support   Michael Walle
      • [U-Boot] [PATCH v9 0/4] Kirkwood: add lschlv2 and lsxhl board support   Prafulla Wadaskar
      • [U-Boot] [PATCH v9 0/4] Kirkwood: add lschlv2 and lsxhl board support   Michael Walle
      • [U-Boot] [PATCH v9 0/4] Kirkwood: add lschlv2 and lsxhl board support   Michael Walle
      • [U-Boot] [PATCH v9 0/4] Kirkwood: add lschlv2 and lsxhl board support   Prafulla Wadaskar
      • [U-Boot] [PATCH v2 0/3] Bug fixes for LaCie devices   Simon Guinot
      • [U-Boot] [PATCH v2 3/3] ARM: don't probe PHY address for LaCie boards   Simon Guinot
      • [U-Boot] [PATCH v2 0/3] Bug fixes for LaCie devices   Simon Guinot
      • [U-Boot] [PATCH v2 0/3] Bug fixes for LaCie devices   Prafulla Wadaskar
      • [U-Boot] [PATCH v2 0/3] Bug fixes for LaCie devices   Simon Guinot
      • [U-Boot] [PATCH v2 1/3] lacie_kw: fix SDRAM banks number for net2big_v2   Simon Guinot
      • [U-Boot] [PATCH v2 2/3] lacie_kw: fix CONFIG_SYS_KWD_CONFIG for inetspace_v2   Simon Guinot
      • [U-Boot] [PATCH v2 0/4] Board support and feature for LaCie devices   Simon Guinot
      • [U-Boot] [PATCH v2 1/4] lacie_kw: add support for EFI partitions   Simon Guinot
      • [U-Boot] [PATCH v2 2/4] ARM: add netspace_mini_v2 to mach-types.h   Simon Guinot
      • [U-Boot] [PATCH v2 3/4] ARM: add support for Network Space v2 Lite and Mini   Simon Guinot
      • [U-Boot] [PATCH v2 4/4] ARM: add support for d2 Network v2   Simon Guinot
      • [U-Boot] [PATCH v2 0/4] Board support and feature for LaCie devices   Simon Guinot
      • [U-Boot] [PATCH] net/sh-ether: Fix build by removing ECSIPR_BRCRXIP and other   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH] net/sh-ether: Fix build by removing ECSIPR_BRCRXIP and other   Shimoda, Yoshihiro
      • [U-Boot] [PATCH] net/sh-ether: Fix build by removing ECSIPR_BRCRXIP and other   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH] net/sh-ether: Fix build by removing ECSIPR_BRCRXIP and other   Joe Hershberger
      • [U-Boot] [PATCH] net/sh-ether: Fix build by removing ECSIPR_BRCRXIP and other   Joe Hershberger
• [U-Boot] [PATCH] tftp: fix type of block arg to store_block   Wolfgang Denk
  • [U-Boot] [PATCH][v2] powerpc/CoreNet: add tool to support pbl image build.   Shaohui Xie
  • [U-Boot] [PATCH][v2] powerpc/CoreNet: add tool to support pbl image build.   Wolfgang Denk
  • [U-Boot] [PATCH][v2] powerpc/CoreNet: add tool to support pbl image build.   Scott Wood
  • [U-Boot] [PATCH][v2] powerpc/CoreNet: add tool to support pbl image build.   Wolfgang Denk
  • [U-Boot] [PATCH 1/2] ARM: add basic support for the Broadcom BCM2835 SoC   Stephen Warren
  • [U-Boot] [PATCH 2/2] ARM: bcm2835: add Raspberry Pi model B board   Stephen Warren
  • [U-Boot] [PATCH 2/2] ARM: bcm2835: add Raspberry Pi model B board   Graeme Russ
  • [U-Boot] [PATCH 2/2] ARM: bcm2835: add Raspberry Pi model B board   Stephen Warren
  • [U-Boot] [PATCH 1/2] ARM: add basic support for the Broadcom BCM2835 SoC   Stephen Warren
  • [U-Boot] [PATCH 1/2] ARM: add basic support for the Broadcom BCM2835 SoC   Stephen Warren
  • [U-Boot] [PATCH 1/2] ARM: add basic support for the Broadcom BCM2835 SoC   Albert ARIBAUD
  • [U-Boot] [PATCH 1/2] ARM: add basic support for the Broadcom BCM2835 SoC   Stephen Warren
  • [U-Boot] [PATCH 1/2] ARM: add basic support for the Broadcom BCM2835 SoC   Wolfgang Denk
  • [U-Boot] [PATCH 1/2] ARM: add basic support for the Broadcom BCM2835 SoC   Stephen Warren
  • [U-Boot] [PATCH 1/2] ARM: add basic support for the Broadcom BCM2835 SoC   Wolfgang Denk
  • [U-Boot] [PATCH 1/2] ARM: add basic support for the Broadcom BCM2835 SoC   Stephen Warren
  • [U-Boot] [PATCH 1/2] ARM: add basic support for the Broadcom BCM2835 SoC   Tom Rini
  • [U-Boot] [PATCH 1/2] ARM: add basic support for the Broadcom BCM2835 SoC   Wolfgang Denk
  • [U-Boot] [PATCH 1/2] ARM: add basic support for the Broadcom BCM2835 SoC   Stephen Warren
  • [U-Boot] [PATCH 1/2] ARM: add basic support for the Broadcom BCM2835 SoC   Wolfgang Denk
  • [U-Boot] [PATCH 1/2] ARM: add basic support for the Broadcom BCM2835 SoC   Stephen Warren
  • [U-Boot] [PATCH 1/2] ARM: add basic support for the Broadcom BCM2835 SoC   Wolfgang Denk
  • [U-Boot] [PATCH 1/2] ARM: add basic support for the Broadcom BCM2835 SoC   Tom Rini
  • [U-Boot] [PATCH 1/2 V6] EXYNOS5: PINMUX: Added default pinumx settings   Rajeshwari Shinde
  • [U-Boot] [PATCH 1/2 V6] EXYNOS5: PINMUX: Added default pinumx settings   Simon Glass
  • [U-Boot] [PATCH 1/2 V6] EXYNOS5: PINMUX: Added default pinumx settings   Minkyu Kang
  • [U-Boot] [PATCH 2/2 V6] EXYNOS: SMDK5250: Enable the pinmux setup   Rajeshwari Shinde
  • [U-Boot] [PATCH 2/2 V6] EXYNOS: SMDK5250: Enable the pinmux setup   Simon Glass
  • [U-Boot] [PATCH 2/2 V6] EXYNOS: SMDK5250: Enable the pinmux setup   Minkyu Kang
  • [U-Boot] [PATCH 0/8 V2] EXYNOS5: Enable I2C support   Rajeshwari Shinde
  • [U-Boot] [PATCH 1/8 V2] EXYNOS: CLK: Add i2c clock   Rajeshwari Shinde
  • [U-Boot] [PATCH 1/8 V2] EXYNOS: CLK: Add i2c clock   Simon Glass
  • [U-Boot] [PATCH 2/8 V2] EXYNOS: Add I2C base address.   Rajeshwari Shinde
  • [U-Boot] [PATCH 3/8 V2] EXYNOS: PINMUX: Add pinmux support for I2C   Rajeshwari Shinde
  • [U-Boot] [PATCH 3/8 V2] EXYNOS: PINMUX: Add pinmux support for I2C   Simon Glass
  • [U-Boot] [PATCH 4/8 V2] I2C: Move struct s3c24x0_i2c to a common place.   Rajeshwari Shinde
  • [U-Boot] [PATCH 5/8 V2] I2C: S3C24X0: Add offset to calculate next i2c channel base address   Rajeshwari Shinde
  • [U-Boot] [PATCH 6/8 V2] I2C: Modify the I2C driver for EXYNOS5   Rajeshwari Shinde
  • [U-Boot] [PATCH 6/8 V2] I2C: Modify the I2C driver for EXYNOS5   Simon Glass
  • [U-Boot] [PATCH 6/8 V2] I2C: Modify the I2C driver for EXYNOS5   Joonyoung Shim
  • [U-Boot] [PATCH 6/8 V2] I2C: Modify the I2C driver for EXYNOS5   Rajeshwari Birje
  • [U-Boot] [PATCH 6/8 V2] I2C: Modify the I2C driver for EXYNOS5   Joonyoung Shim
  • [U-Boot] [PATCH 6/8 V2] I2C: Modify the I2C driver for EXYNOS5   Rajeshwari Birje
  • [U-Boot] [PATCH 7/8 V2] I2C: Add support for Multi channel   Rajeshwari Shinde
  • [U-Boot] [PATCH 7/8 V2] I2C: Add support for Multi channel   Joonyoung Shim
  • [U-Boot] [PATCH 7/8 V2] I2C: Add support for Multi channel   Rajeshwari Birje
  • [U-Boot] [PATCH 7/8 V2] I2C: Add support for Multi channel   Joonyoung Shim
  • [U-Boot] [PATCH 8/8 V2] CONFIG: SMDK5250: I2C: Enable I2C   Rajeshwari Shinde
  • [U-Boot] [PATCH 1/6] powerpc/corenet_ds: Update README.srio-boot-corenet   Liu Gang
  • [U-Boot] [PATCH 4/6] powerpc/corenet_ds: Update README and README.srio-pcie-boot-corenet   Liu Gang
  • [U-Boot] [PATCH 5/6] powerpc/corenet_ds: Master module for boot from PCIE   Liu Gang
  • [U-Boot] [PATCH 6/6] powerpc/corenet_ds: Slave module for boot from PCIE   Liu Gang
  • [U-Boot] [PATCH 2/6] powerpc/corenet_ds: Get rid of the SRIOBOOT_MASTER build target   Liu Gang
  • [U-Boot] [PATCH 3/6] powerpc/corenet_ds: Get rid of the CONFIG_SRIOBOOT_SLAVE_PORTx macro   Liu Gang
• [U-Boot] 85xx platforms build broken due to flush dcache functions missing   Marek Vasut
  • [U-Boot] 85xx platforms build broken due to flush dcache functions missing   Wolfgang Denk
    • [U-Boot] [PATCH v2 0/7] feature additions and fixes for da850/omap-l138   Prabhakar Lad
    • [U-Boot] [PATCH v2 1/7] da850/omap-l138: Add MMC support for DA850/OMAP-L138   Prabhakar Lad
    • [U-Boot] [PATCH v2 2/7] da850/omap-l138: modifications for Logic PD Rev.3 AM18xx EVM   Prabhakar Lad
    • [U-Boot] [PATCH v2 3/7] da850/omap-l138: Add support to read u-boot image from MMC/SD   Prabhakar Lad
    • [U-Boot] [PATCH v2 3/7] da850/omap-l138: Add support to read u-boot image from MMC/SD   Christian Riesch
    • [U-Boot] [PATCH v2 3/7] da850/omap-l138: Add support to read u-boot image from MMC/SD   Lad, Prabhakar
    • [U-Boot] [PATCH v2 3/7] da850/omap-l138: Add support to read u-boot image from MMC/SD   Christian Riesch
    • [U-Boot] [PATCH v2 3/7] da850/omap-l138: Add support to read u-boot image from MMC/SD   Lad, Prabhakar
    • [U-Boot] [PATCH v2 4/7] da850/omap-l138: Make MMC and NOR support mutually exclusive   Prabhakar Lad
    • [U-Boot] [PATCH v2 5/7] da850/omap-l138: Fix NAND flash timings   Prabhakar Lad
    • [U-Boot] [PATCH v2 6/7] da850/omap-l138: Add support for NAND SPL   Prabhakar Lad
    • [U-Boot] [PATCH v2 7/7] da850/omap-l138: add support for direct NOR boot mode   Prabhakar Lad
    • [U-Boot] [PATCH v2 0/7] feature additions and fixes for da850/omap-l138   Sughosh Ganu
    • [U-Boot] [PATCH 00/20] updates for Keymile Marvell boards   Valentin Longchamp
    • [U-Boot] [PATCH 01/20] arm/km: enable spi claim bus   Valentin Longchamp
    • [U-Boot] [PATCH 02/20] arm/km: use correct kw_gpio function for NAND/SPI switching   Valentin Longchamp
    • [U-Boot] [PATCH 02/20] arm/km: use correct kw_gpio function for NAND/SPI switching   Prafulla Wadaskar
    • [U-Boot] [PATCH 02/20] arm/km: use correct kw_gpio function for NAND/SPI switching   Holger Brunck
    • [U-Boot] [PATCH 02/20] arm/km: use correct kw_gpio function for NAND/SPI switching   Prafulla Wadaskar
    • [U-Boot] [PATCH 02/20] arm/km: use correct kw_gpio function for NAND/SPI switching   Holger Brunck
    • [U-Boot] [PATCH 02/20] arm/km: use correct kw_gpio function for NAND/SPI switching   Holger Brunck
    • [U-Boot] [PATCH 03/20] arm/kirkwood: protect the ENV_SPI #defines   Valentin Longchamp
    • [U-Boot] [PATCH 04/20] arm/km: add kmnusa board support   Valentin Longchamp
    • [U-Boot] [PATCH 04/20] arm/km: add kmnusa board support   Prafulla Wadaskar
    • [U-Boot] [PATCH 04/20] arm/km: add kmnusa board support   Holger Brunck
    • [U-Boot] [PATCH 04/20] arm/km: add kmnusa board support   Prafulla Wadaskar
    • [U-Boot] [PATCH 04/20] arm/km: add kmnusa board support   Holger Brunck
    • [U-Boot] [PATCH 04/20] arm/km: add kmnusa board support   Prafulla Wadaskar
    • [U-Boot] [PATCH 04/20] arm/km: add kmnusa board support   Prafulla Wadaskar
    • [U-Boot] [PATCH 04/20] arm/km: add kmnusa board support   Holger Brunck
    • [U-Boot] [PATCH 04/20] arm/km: add kmnusa board support   Prafulla Wadaskar
    • [U-Boot] [PATCH 04/20] arm/km: add kmnusa board support   Holger Brunck
    • [U-Boot] [PATCH 04/20] arm/km: add kmnusa board support   Prafulla Wadaskar
    • [U-Boot] [PATCH 04/20] arm/km: add kmnusa board support   Holger Brunck
    • [U-Boot] [PATCH 05/20] arm/km: add kmcoge5un board support   Valentin Longchamp
    • [U-Boot] [PATCH 05/20] arm/km: add kmcoge5un board support   Prafulla Wadaskar
    • [U-Boot] [PATCH 06/20] arm/km: convert mgcoge3un target to km_kirkwood   Valentin Longchamp
    • [U-Boot] [PATCH 07/20] arm/km: remove portl2.h and use km_kirkwood instead   Valentin Longchamp
    • [U-Boot] [PATCH 08/20] arm/km: correct init of 88e6352 switch in the reset_phy function   Valentin Longchamp
    • [U-Boot] [PATCH 09/20] arm/km: enable BOCO2 FPGA download support   Valentin Longchamp
    • [U-Boot] [PATCH 10/20] arm/km: cleanup km_kirkwood boards   Valentin Longchamp
    • [U-Boot] [PATCH 10/20] arm/km: cleanup km_kirkwood boards   Prafulla Wadaskar
    • [U-Boot] [PATCH 10/20] arm/km: cleanup km_kirkwood boards   Holger Brunck
    • [U-Boot] [PATCH 11/20] arm/km: redefine piggy 4 reg names to avoid conflicts   Valentin Longchamp
    • [U-Boot] [PATCH 12/20] arm/km: add support for external switch configuration   Valentin Longchamp
    • [U-Boot] [PATCH 12/20] arm/km: add support for external switch configuration   Prafulla Wadaskar
    • [U-Boot] [PATCH 12/20] arm/km: add support for external switchconfiguration   Valentin Longchamp
    • [U-Boot] [PATCH 13/20] arm/km: enable external switch configuration for kmnusa   Valentin Longchamp
    • [U-Boot] [PATCH 14/20] arm/km: skip FPGA config when already configured   Valentin Longchamp
    • [U-Boot] [PATCH 15/20] arm/km: support the 2 PCIe fpga resets   Valentin Longchamp
    • [U-Boot] [PATCH 16/20] arm/km: add implementation for read_dip_switch   Valentin Longchamp
    • [U-Boot] [PATCH 17/20] arm/km: fix testpin detection for kmcoge5un   Valentin Longchamp
    • [U-Boot] [PATCH 18/20] arm/km: implement weak function board_spi_clam_bus/release   Valentin Longchamp
    • [U-Boot] [PATCH 19/20] arm/km: remove spi toggle command   Valentin Longchamp
    • [U-Boot] [PATCH 20/20] arm/km: remove calls to kw_gpio_* in board_early_init_f   Valentin Longchamp
    • [U-Boot] [PATCH 20/20] arm/km: remove calls to kw_gpio_* in board_early_init_f   Prafulla Wadaskar
    • [U-Boot] [PATCH 20/20] arm/km: remove calls to kw_gpio_* in board_early_init_f   Holger Brunck
    • [U-Boot] [PATCH v2] da850/omap-l138: Enable auto negotiation in RMII mode   Prabhakar Lad
    • [U-Boot] [PATCH v2] da850/omap-l138: Enable auto negotiation in RMII mode   Tom Rini
• [U-Boot] [PATCH v3] [resend] kwboot: boot kirkwood SoCs over a serial link   Luka Perkov
  • [U-Boot] [PATCH v3] [resend] kwboot: boot kirkwood SoCs over a serial link   Daniel Stodden
    • [U-Boot] [PATCH v3] [resend] kwboot: boot kirkwood SoCs over a serial link   Prafulla Wadaskar
• [U-Boot] [PATCH] fix IDE_BUS(dev) macro   Luka Perkov
  • [U-Boot] [PATCH] fix IDE_BUS(dev) macro   Albert ARIBAUD
• [U-Boot] pull request for u-boot-tegra/master   Tom Warren
  • [U-Boot] pull request for u-boot-tegra/master   Albert ARIBAUD
    • [U-Boot] [PATCH] cmd_nand: fix crashing bug in nand read/write   Steve Sakoman
    • [U-Boot] [PATCH] cmd_nand: fix crashing bug in nand read/write   Scott Wood
    • [U-Boot] [PATCH] mx53ard: Remove unused CONFIG_MII_GASKET   Fabio Estevam
    • [U-Boot] [PATCH] mx53ard: Remove unused CONFIG_MII_GASKET   Stefano Babic
• [U-Boot] [PATCH][v2] powerpc/CoreNet: add tool to support pbl image build.   Wolfgang Denk
  • [U-Boot] [PATCH] net/designware: Add-on: Consecutive writes must have delay   Dinh Nguyen
  • [U-Boot] [PATCH] net/designware: Add-on: Consecutive writes must have delay   Wolfgang Denk
• [U-Boot] [PATCH V2] MPC8xxx: Define cache ops for USB   Wolfgang Denk
• [U-Boot] Pull request: u-boot-sh   Wolfgang Denk
• [U-Boot] Which version of u-boot contains support for twrmpc5125   Wolfgang Denk
• [U-Boot] [PATCH] net/designware: Add-on: Consecutive writes must have delay   Wolfgang Denk
• [U-Boot] [PATCH] mmc: sh_mmcif: enable MMC_MODE_HC   Shimoda, Yoshihiro
• [U-Boot] [PATCH] mmc: fix capacity calculation when EXT_CSD_SEC_CNT is used   Shimoda, Yoshihiro
• [U-Boot] [PATCH 0/7] common/lcd cleanup   Igor Grinberg
• [U-Boot] U-boot failed   Marek Vasut
• [U-Boot] [PATCH 2/7] common lcd: simplify #ifdefs   Anatolij Gustschin
  • [U-Boot] [PATCH 2/7] common lcd: simplify #ifdefs   Nikita Kiryanov
• [U-Boot] [PATCH 3/7] common lcd: simplify bitmap_plot   Anatolij Gustschin
  • [U-Boot] [PATCH 0/6] Support for CPSW switch   Ilya Yanok
  • [U-Boot] [PATCH 1/6] omap24xx_i2c: add 2-byte address support   Ilya Yanok
  • [U-Boot] [PATCH 1/6] omap24xx_i2c: add 2-byte address support   Tom Rini
  • [U-Boot] [PATCH 2/6] cpsw: add driver for cpsw ethernet device   Ilya Yanok
  • [U-Boot] [PATCH 2/6] cpsw: add driver for cpsw ethernet device   Ilya Yanok
  • [U-Boot] [PATCH 3/6] am33xx: CPSW init and definitions   Ilya Yanok
  • [U-Boot] [PATCH 4/6] am33xx: pin mux defintions for CPSW switch   Ilya Yanok
  • [U-Boot] [PATCH 5/6] am335x_evm: read the on-board EEPROM   Ilya Yanok
  • [U-Boot] [PATCH 6/6] am335x_evm: CPSW support   Ilya Yanok
• [U-Boot] [PATCH 7/7] common lcd: simplify lcd_display_bitmap   Anatolij Gustschin
• [U-Boot] U-boot failed   Marek Vasut
• [U-Boot] [PATCH 1/7] common lcd: minor coding style changes   Anatolij Gustschin
  • [U-Boot] [PATCH v2] net/designware: Consecutive writes to the same register to be avoided   Dinh Nguyen
  • [U-Boot] [PATCH v2] net/designware: Consecutive writes to the same register to be avoided   Amit Virdi
• [U-Boot] [PATCH 4/7] common lcd: simplify lcd_logo   Anatolij Gustschin
  • [U-Boot] [PATCH RESEND] Fix misuse of calloc() in linux/compat.h header   Marek Vasut
  • [U-Boot] [PATCH RESEND] Fix misuse of calloc() in linux/compat.h header   Wolfgang Denk
  • [U-Boot] [PATCH RESEND] Fix misuse of calloc() in linux/compat.h header   Marek Vasut
  • [U-Boot] [PATCH RESEND] Fix misuse of calloc() in linux/compat.h header   Wolfgang Denk
  • [U-Boot] [PATCH RESEND] Fix misuse of calloc() in linux/compat.h header   Marek Vasut
  • [U-Boot] [PATCH 0/8] EXT2 cleanup   Marek Vasut
  • [U-Boot] [PATCH 1/8] EXT2: Indent cleanup of dev.c   Marek Vasut
  • [U-Boot] [PATCH 2/8] EXT2: Indent cleanup ext2fs.c   Marek Vasut
  • [U-Boot] [PATCH 2/8] EXT2: Indent cleanup ext2fs.c   Jason Cooper
  • [U-Boot] [PATCH 2/8] EXT2: Indent cleanup ext2fs.c   Marek Vasut
  • [U-Boot] [PATCH 3/8] EXT2: Rework ext2fs_blockgroup() function   Marek Vasut
  • [U-Boot] [PATCH 4/8] EXT2: Rework ext2fs_read_file()   Marek Vasut
  • [U-Boot] [PATCH 5/8] EXT2: Rework ext2fs_read_symlink()   Marek Vasut
  • [U-Boot] [PATCH 6/8] EXT2: Rework ext2fs_find_file1()   Marek Vasut
  • [U-Boot] [PATCH 7/8] EXT2: Rework ext2fs_iterate_dir()   Marek Vasut
  • [U-Boot] [PATCH 8/8] EXT2: Rework ext2fs_read_block()   Marek Vasut
  • [U-Boot] [PATCH 0/8] EXT2 cleanup   Jorgen Lundman
  • [U-Boot] [PATCH 0/8] EXT2 cleanup   Marek Vasut
  • [U-Boot] [PATCH 0/8] EXT2 cleanup   Jason Cooper
  • [U-Boot] [PATCH 0/8] EXT2 cleanup   Marek Vasut
  • [U-Boot] [PATCH 0/8] EXT2 cleanup   Marek Vasut
  • [U-Boot] [PATCH 0/8] EXT2 cleanup   Jason Cooper
  • [U-Boot] [PATCH 0/8] EXT2 cleanup   Marek Vasut
  • [U-Boot] [PATCH 0/8] EXT2 cleanup   Jason Cooper
  • [U-Boot] [PATCH 0/8] EXT2 cleanup   Marek Vasut
• [U-Boot] pull request for u-boot-tegra/master   Albert ARIBAUD
• [U-Boot] Pull request: nand flash   Scott Wood
  • [U-Boot] Pull request: nand flash   Wolfgang Denk
• [U-Boot] [PATCH v2 1/7] tegra: Rework Tamonten support   Allen Martin
  • [U-Boot] [PATCH v2 1/7] tegra: Rework Tamonten support   Stephen Warren
    • [U-Boot] [PATCH v2 1/7] tegra: Rework Tamonten support   Allen Martin
      • [U-Boot] [PATCH v2 1/7] tegra: Rework Tamonten support   Stephen Warren
      • [U-Boot] [PATCH v2 1/7] tegra: Rework Tamonten support   Allen Martin
      • [U-Boot] [PATCH v2 1/7] tegra: Rework Tamonten support   Stephen Warren
      • [U-Boot] [PATCH v2 1/7] tegra: Rework Tamonten support   Thierry Reding
      • [U-Boot] [PATCH v2 1/7] tegra: Rework Tamonten support   Allen Martin
      • [U-Boot] [PATCH v2 1/7] tegra: Rework Tamonten support   Thierry Reding
      • [U-Boot] [PATCH v2 1/7] tegra: Rework Tamonten support   Allen Martin
      • [U-Boot] [PATCH v3 0/14] split tegra20 arm7 code into separate SPL   Allen Martin
      • [U-Boot] [PATCH v3 01/14] tegra20: rename tegra2 -> tegra20   Allen Martin
      • [U-Boot] [PATCH v3 01/14] tegra20: rename tegra2 -> tegra20   Tom Warren
      • [U-Boot] [PATCH v3 01/14] tegra20: rename tegra2 -> tegra20   Allen Martin
      • [U-Boot] [PATCH v3 07/14] ARM: add tegra20 support to arm720t   Allen Martin
      • [U-Boot] [PATCH v3 07/14] ARM: add tegra20 support to arm720t   Tom Warren
      • [U-Boot] [PATCH v3 07/14] ARM: add tegra20 support to arm720t   Stephen Warren
      • [U-Boot] [PATCH v3 07/14] ARM: add tegra20 support to arm720t   Simon Glass
      • [U-Boot] [PATCH v3 07/14] ARM: add tegra20 support to arm720t   Allen Martin
      • [U-Boot] [PATCH v3 08/14] tegra20: add SPL config options for tegra20 boards   Allen Martin
      • [U-Boot] [PATCH v3 08/14] tegra20: add SPL config options for tegra20 boards   Stephen Warren
      • [U-Boot] [PATCH v3 08/14] tegra20: add SPL config options for tegra20 boards   Allen Martin
      • [U-Boot] [PATCH v3 08/14] tegra20: add SPL config options for tegra20 boards   Simon Glass
      • [U-Boot] [PATCH v3 08/14] tegra20: add SPL config options for tegra20 boards   Allen Martin
      • [U-Boot] [PATCH v3 08/14] tegra20: add SPL config options for tegra20 boards   Simon Glass
      • [U-Boot] [PATCH v3 12/14] tegra20: Remove armv4t build flags   Allen Martin
      • [U-Boot] [PATCH v3 12/14] tegra20: Remove armv4t build flags   Stephen Warren
      • [U-Boot] [PATCH v3 12/14] tegra20: Remove armv4t build flags   Allen Martin
      • [U-Boot] [PATCH v3 12/14] tegra20: Remove armv4t build flags   Simon Glass
      • [U-Boot] [PATCH v3 12/14] tegra20: Remove armv4t build flags   Simon Glass
      • [U-Boot] [PATCH v3 0/14] split tegra20 arm7 code into separate SPL   Stephen Warren
      • [U-Boot] [PATCH v3 0/14] split tegra20 arm7 code into separate SPL   Simon Glass
      • [U-Boot] [PATCH v3 02/14] tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common   Allen Martin
      • [U-Boot] [PATCH v3 03/14] tegra20: rename CONFIG_MACH_TEGRA_GENERIC   Allen Martin
      • [U-Boot] [PATCH v3 04/14] mkconfig: add support for SPL CPU   Allen Martin
      • [U-Boot] [PATCH v3 04/14] mkconfig: add support for SPL CPU   Simon Glass
      • [U-Boot] [PATCH v3 04/14] mkconfig: add support for SPL CPU   Allen Martin
      • [U-Boot] [PATCH v3 05/14] ARM: Fix arm720t SPL build   Allen Martin
      • [U-Boot] [PATCH v3 06/14] tegra20: remove timer_init from SPL build   Allen Martin
      • [U-Boot] [PATCH v3 09/14] tegra20: add u-boot.t2 target   Allen Martin
      • [U-Boot] [PATCH v3 09/14] tegra20: add u-boot.t2 target   Stephen Warren
      • [U-Boot] [PATCH v3 09/14] tegra20: add u-boot.t2 target   Allen Martin
      • [U-Boot] [PATCH v3 09/14] tegra20: add u-boot.t2 target   Simon Glass
      • [U-Boot] [PATCH v3 09/14] tegra20: add u-boot.t2 target   Allen Martin
      • [U-Boot] [PATCH v3 09/14] tegra20: add u-boot.t2 target   Simon Glass
      • [U-Boot] [PATCH v3 09/14] tegra20: add u-boot.t2 target   Allen Martin
      • [U-Boot] [PATCH v3 09/14] tegra20: add u-boot.t2 target   Simon Glass
      • [U-Boot] [PATCH v3 10/14] tegra: move SDRAM param save to later in boot   Allen Martin
      • [U-Boot] [PATCH v3 10/14] tegra: move SDRAM param save to later in boot   Simon Glass
      • [U-Boot] [PATCH v3 10/14] tegra: move SDRAM param save to later in boot   Allen Martin
      • [U-Boot] [PATCH v3 11/14] tegra20: Remove CPU init code from tegra20 u-boot   Allen Martin
      • [U-Boot] [PATCH v3 11/14] tegra20: Remove CPU init code from tegra20 u-boot   Simon Glass
      • [U-Boot] [PATCH v3 11/14] tegra20: Remove CPU init code from tegra20 u-boot   Allen Martin
      • [U-Boot] [PATCH v3 11/14] tegra20: Remove CPU init code from tegra20 u-boot   Simon Glass
      • [U-Boot] [PATCH v3 13/14] tegra20: plutux: change obj directory mkdir commands   Allen Martin
      • [U-Boot] [PATCH v3 13/14] tegra20: plutux: change obj directory mkdir commands   Stephen Warren
      • [U-Boot] [PATCH v3 13/14] tegra20: plutux: change obj directory mkdir commands   Allen Martin
      • [U-Boot] [PATCH v3 13/14] tegra20: plutux: change obj directory mkdir commands   Simon Glass
      • [U-Boot] [PATCH v3 14/14] tegra20: tec: add tegra20-common-post.h   Allen Martin
      • [U-Boot] [PATCH v3 14/14] tegra20: tec: add tegra20-common-post.h   Thierry Reding
• [U-Boot] pull request for u-boot-tegra/master   Albert ARIBAUD
  • [U-Boot] pull request for u-boot-tegra/master   Stephen Warren
    • [U-Boot] pull request for u-boot-tegra/master   Stephen Warren
      • [U-Boot] pull request for u-boot-tegra/master   Stephen Warren
      • [U-Boot] pull request for u-boot-tegra/master   Simon Glass
      • [U-Boot] pull request for u-boot-tegra/master   Stephen Warren
      • [U-Boot] [PATCH] fdt: send all dtc output to stderr   Stephen Warren
      • [U-Boot] [PATCH] fdt: send all dtc output to stderr   Simon Glass
• [U-Boot] Possible PHYLIB issue   Marek Vasut
• [U-Boot] [PATCH] tegra2: move tegra2 SoC code to arch/arm/cpu/tegra2-common   Simon Glass
• [U-Boot] pull request for u-boot-tegra/master   Albert ARIBAUD
• [U-Boot] imx: gpio cleanups   Vikram Narayanan
  • [U-Boot] [PATCH 1/3] imx25: Move MXC_GPIO_PORT_TO_NUM to imx-regs.h   Vikram Narayanan
    • [U-Boot] [PATCH 1/3] imx25: Move MXC_GPIO_PORT_TO_NUM to imx-regs.h   Fabio Estevam
      • [U-Boot] [PATCH 1/3] imx25: Move MXC_GPIO_PORT_TO_NUM to imx-regs.h   Vikram Narayanan
      • [U-Boot] [PATCH 1/3] imx25: Move MXC_GPIO_PORT_TO_NUM to imx-regs.h   Troy Kisky
    • [U-Boot] [PATCH 1/3] imx25: Move MXC_GPIO_PORT_TO_NUM to imx-regs.h   Fabio Estevam
      • [U-Boot] [PATCH 1/3] imx25: Move MXC_GPIO_PORT_TO_NUM to imx-regs.h   Vikram Narayanan
      • [U-Boot] [PATCH 1/3] imx25: Move MXC_GPIO_PORT_TO_NUM to imx-regs.h   Fabio Estevam
      • [U-Boot] [PATCH 1/3] imx25: Move MXC_GPIO_PORT_TO_NUM to imx-regs.h   Stefano Babic
      • [U-Boot] [PATCH 1/3] imx25: Move MXC_GPIO_PORT_TO_NUM to imx-regs.h   Vikram Narayanan
      • [U-Boot] [PATCH 1/3] imx25: Move MXC_GPIO_PORT_TO_NUM to imx-regs.h   Fabio Estevam
  • [U-Boot] [PATCH 2/3] tx25: Use generic gpio_* calls   Vikram Narayanan
    • [U-Boot] [PATCH 2/3] tx25: Use generic gpio_* calls   Fabio Estevam
    • [U-Boot] [PATCH 2/3] tx25: Use generic gpio_* calls   Vikram Narayanan
    • [U-Boot] [PATCH 2/3] tx25: Use generic gpio_* calls   Fabio Estevam
  • [U-Boot] [PATCH 3/3] imx: Define a common header file for gpio.h   Vikram Narayanan
  • [U-Boot] imx: gpio cleanups   Vikram Narayanan
• [U-Boot] Please pull u-boot-ti/master   Albert ARIBAUD
  • [U-Boot] Acccessing IRAM in MX53   Teemu Keskinarkaus
    • [U-Boot] Acccessing IRAM in MX53   Stefano Babic
      • [U-Boot] Acccessing IRAM in MX53   Teemu Keskinarkaus
• [U-Boot] U-boot failed   Marek Vasut
  • [U-Boot] [PATCH V2] MMC: DWMMC: Add DWMMC driver   Rajeshwari Shinde
  • [U-Boot] [PATCH V2] MMC: DWMMC: Add DWMMC driver   Rajeshwari Birje
  • [U-Boot] [PATCH V2] MMC: DWMMC: Add DWMMC driver   Chander Kashyap
  • [U-Boot] [PATCH V2] MMC: DWMMC: Add DWMMC driver   Jaehoon Chung
  • [U-Boot] [PATCH V2] MMC: DWMMC: Add DWMMC driver   Rajeshwari Birje
  • [U-Boot] [PATCH V2] MMC: DWMMC: Add DWMMC driver   Jaehoon Chung
  • [U-Boot] [PATCH V2] MMC: DWMMC: Add DWMMC driver   Rajeshwari Birje
  • [U-Boot] [PATCH V2] MMC: DWMMC: Add DWMMC driver   Rajeshwari Birje
  • [U-Boot] [PATCH] mx28: Fix elftosb source link in README.mx28_common   Anatolij Gustschin
  • [U-Boot] [PATCH] mx28: Fix elftosb source link in README.mx28_common   Otavio Salvador
  • [U-Boot] [PATCH] mx28: Fix elftosb source link in README.mx28_common   Marek Vasut
  • [U-Boot] [PATCH] mx28: Fix elftosb source link in README.mx28_common   Otavio Salvador
  • [U-Boot] [PATCH] mx28: Fix elftosb source link in README.mx28_common   Anatolij Gustschin
  • [U-Boot] [PATCH] mx28: Fix elftosb source link in README.mx28_common   Detlev Zundel
  • [U-Boot] [PATCH] mx28: Fix elftosb source link in README.mx28_common   Anatolij Gustschin
  • [U-Boot] [PATCH v2] mx28: Fix elftosb source link in README.mx28_common   Anatolij Gustschin
  • [U-Boot] [PATCH v2] mx28: Fix elftosb source link in README.mx28_common   Detlev Zundel
  • [U-Boot] [PATCH v2] mx28: Fix elftosb source link in README.mx28_common   Marek Vasut
  • [U-Boot] [u-boot-imx] Pull request for u-boot-imx tree   Otavio Salvador
    • [U-Boot] [u-boot-imx] Pull request for u-boot-imx tree   Stefano Babic
      • [U-Boot] [u-boot-imx] Pull request for u-boot-imx tree   Otavio Salvador
• [U-Boot] [PATCH v9 0/4] Kirkwood: add lschlv2 and lsxhl board support   Michael Walle
  • [U-Boot] [PATCH] omap4: Use a smaller M,N couple for IVA DPLL   Sebastien Jan
  • [U-Boot] [PATCH] omap4: Use a smaller M,N couple for IVA DPLL   Tom Rini
  • [U-Boot] [PATCH] omap4: Use a smaller M,N couple for IVA DPLL   Jan, Sebastien
  • [U-Boot] [PATCH][v3] powerpc/CoreNet: add tool to support pbl image build.   Shaohui Xie
  • [U-Boot] [PATCH][v3] powerpc/CoreNet: add tool to support pbl image build.   Xie Shaohui-B21989
• [U-Boot] [PATCH 1/2] MSM7x27a:Add support for interrupt   Srikanth Reddy
• [U-Boot] [PATCH] mx6: Avoid writing to read-only bits in imximage.cfg   Vikram Narayanan
  • [U-Boot] [PATCH] mx6: Avoid writing to read-only bits in imximage.cfg   Dirk Behme
    • [U-Boot] [PATCH] mx6: Avoid writing to read-only bits in imximage.cfg   Liu Hui-R64343
    • [U-Boot] [PATCH] mx6: Avoid writing to read-only bits in imximage.cfg   Marek Vasut
    • [U-Boot] [PATCH] mx6: Avoid writing to read-only bits in imximage.cfg   Fabio Estevam
    • [U-Boot] [PATCH] mx6: Avoid writing to read-only bits in imximage.cfg   Liu Hui-R64343
    • [U-Boot] [PATCH] mx6: Avoid writing to read-only bits in imximage.cfg   Marek Vasut
    • [U-Boot] [PATCH] mx6: Avoid writing to read-only bits in imximage.cfg   Liu Hui-R64343
    • [U-Boot] [PATCH] mx6: Avoid writing to read-only bits in imximage.cfg   Marek Vasut
  • [U-Boot] [PATCH] mx6: Avoid writing to read-only bits in imximage.cfg   Marek Vasut
    • [U-Boot] [PATCH] mx6: Avoid writing to read-only bits in imximage.cfg   Vikram Narayanan
      • [U-Boot] [PATCH] mx6: Avoid writing to read-only bits in imximage.cfg   Marek Vasut
      • [U-Boot] [PATCH] mx6: Avoid writing to read-only bits in imximage.cfg   Vikram Narayanan
  • [U-Boot] [PATCH] mx6: Avoid writing to read-only bits in imximage.cfg   Stefano Babic
• [U-Boot] [PATCH v2] tx25: Use generic gpio_* calls   Vikram Narayanan
  • [U-Boot] [PATCH v2] tx25: Use generic gpio_* calls   Fabio Estevam
  • [U-Boot] [PATCH v2] tx25: Use generic gpio_* calls   Stefano Babic
    • [U-Boot] [PATCH v2] tx25: Use generic gpio_* calls   Vikram Narayanan
  • [U-Boot] [PATCH v3] tx25: Use generic gpio_* calls   Vikram Narayanan
    • [U-Boot] [PATCH v3] tx25: Use generic gpio_* calls   Fabio Estevam
• [U-Boot] [PATCH 2/9] NET: fec_mxc.c: Add support for MII for MX5 SOCs   Stefano Babic
• [U-Boot] [PATCH] i.mx: i.mx6x: NO_MUX_I/NO_PAD_I not set correctly   Stefano Babic
• [U-Boot] [PATCH V2] i.MX: fsl_esdhc: allow use with cache enabled.   Stefano Babic
  • [U-Boot] [PATCH V2] i.MX: fsl_esdhc: allow use with cache enabled.   Eric Nelson
    • [U-Boot] [PATCH V2] i.MX: fsl_esdhc: allow use with cache enabled.   Marek Vasut
• [U-Boot] [PATCH v2] mx53loco: Fix revision of Dialog boards   Stefano Babic
• [U-Boot] [PATCH] mx53: Fix mask for SATA reference clock   Stefano Babic
• [U-Boot] [PATCH] mx53: Fix mask for SATA reference clock   Stefano Babic
• [U-Boot] [PATCH 01/10] mx53loco: Remove unused SOBJS   Stefano Babic
  • [U-Boot] [PATCH 1/3] tegra: add GMC/GMD funcmux entry for SFLASH   Stephen Warren
  • [U-Boot] [PATCH 3/3] tegra: trimslice: set up serial flash pinmux   Stephen Warren
  • [U-Boot] [PATCH 1/3] tegra: add GMC/GMD funcmux entry for SFLASH   Tom Warren
  • [U-Boot] [PATCH 2/3] tegra: add pin_mux_spi() board initialization function   Stephen Warren
  • [U-Boot] [PATCH 1/8] arm/davinci: fix DDR2/mDDR memory controller initialization for Omap L138   Mikhail Kshevetskiy
  • [U-Boot] [PATCH 2/8] arm/davinci/da850: add uart0 pinmux   Mikhail Kshevetskiy
  • [U-Boot] [PATCH 3/8] serial/ns16550: ns16550 has a different register layout on SOC_DA8XX   Mikhail Kshevetskiy
  • [U-Boot] [PATCH 3/8] serial/ns16550: ns16550 has a different register layout on SOC_DA8XX   Christian Riesch
  • [U-Boot] [PATCH 4/8] mtd/spi/spi_flash: support CMD_READ_ID=0x90 case   Mikhail Kshevetskiy
  • [U-Boot] [PATCH 5/8] mtd/spi: add sst25l driver   Mikhail Kshevetskiy
  • [U-Boot] [PATCH 6/8] MMC: u-boot-spl may be compiled without partition support   Mikhail Kshevetskiy
  • [U-Boot] [PATCH 7/8] arm/davinci: spl - boot device selection   Mikhail Kshevetskiy
  • [U-Boot] [PATCH 7/8] arm/davinci: spl - boot device selection   Christian Riesch
  • [U-Boot] [PATCH 8/8] arm/davinci: spl - add compressed u-boot image support   Mikhail Kshevetskiy
  • [U-Boot] [PATCH 1/8] arm/davinci: fix DDR2/mDDR memory controller initialization for Omap L138   Christian Riesch
  • [U-Boot] [PATCH 1/8] arm/davinci: fix DDR2/mDDR memory controller initialization for Omap L138   Mikhail Kshevetskiy
  • [U-Boot] [PATCH 1/8] arm/davinci: fix DDR2/mDDR memory controller initialization for Omap L138   Christian Riesch
  • [U-Boot] [PATCH 0/4] OMAP4/5: Remove non-essential clocks, dplls, pads configurations.   R Sricharan
  • [U-Boot] [PATCH 1/4] ARM: OMAP4/5: Move gpmc clocks to essential group.   R Sricharan
  • [U-Boot] [PATCH 2/4] ARM: OMAP4/5: Move USB clocks to essential group.   R Sricharan
  • [U-Boot] [PATCH 3/4] ARM: OMAP4/5: Move USB pads to essential list.   R Sricharan
  • [U-Boot] [PATCH 4/4] ARM: OMAP4/5: Do not configure non essential pads, clocks, dplls.   R Sricharan
  • [U-Boot] [PATCH 0/4] OMAP4/5: Remove non-essential clocks, dplls, pads configurations.   Tom Rini
• [U-Boot] [PATCH 1/8] m28evk: use same notation to alloc the 128kB stack   Stefano Babic
• [U-Boot] [PATCH 1/8] MX28: Fix a typo in mx28_reg_8 macro   Stefano Babic
• [U-Boot] [PATCH 3/8] mx28evk: ensure command definition is in alphabetic order   Stefano Babic
• [U-Boot] [PATCH 2/3] m28evk: drop duplicated definition of CONFIG_OF_LIBFDT   Stefano Babic
• [U-Boot] [PATCH 6/8] mx28evk: fix board config include guardian macro name   Stefano Babic
• [U-Boot] [PATCH 5/8] m28evk: fix board config include guardian macro name   Stefano Babic
  • [U-Boot] [PATCH 04/17] tegra: Add display support to funcmux   Simon Glass
• [U-Boot] [PATCH 11/17] lcd: Add CONFIG_ALIGN_LCD_TO_SECTION to align lcd for MMU   Simon Glass
  • [U-Boot] [PATCH 12/17] lcd: Add support for flushing LCD fb from dcache after update   Simon Glass
    • [U-Boot] [PATCH] arm/km: use spi claim bus to switch between SPI and NAND   Holger Brunck
    • [U-Boot] [PATCH] arm/kirkwood: protect the ENV_SPI #defines   Holger Brunck
    • [U-Boot] [PATCH v2 00/14] updates for Keymile Marvell boards   Holger Brunck
    • [U-Boot] [PATCH v2 01/14] arm/km: add kmnusa board support   Holger Brunck
    • [U-Boot] [PATCH v2 03/14] arm/km: convert mgcoge3un target to km_kirkwood   Holger Brunck
    • [U-Boot] [PATCH v2 04/14] arm/km: remove portl2.h and use km_kirkwood instead   Holger Brunck
    • [U-Boot] [PATCH v2 05/14] arm/km: correct init of 88e6352 switch in the reset_phy function   Holger Brunck
    • [U-Boot] [PATCH v2 06/14] arm/km: enable BOCO2 FPGA download support   Holger Brunck
    • [U-Boot] [PATCH v2 08/14] arm/km: redefine piggy 4 reg names to avoid conflicts   Holger Brunck
    • [U-Boot] [PATCH v2 09/14] arm/km: add support for external switch configuration   Holger Brunck
    • [U-Boot] [PATCH v3 09/14] arm/km: add support for external switch configuration   Valentin Longchamp
    • [U-Boot] [PATCH v2 10/14] arm/km: enable external switch configuration for kmnusa   Holger Brunck
    • [U-Boot] [PATCH v2 11/14] arm/km: skip FPGA config when already configured   Holger Brunck
    • [U-Boot] [PATCH v2 12/14] arm/km: support the 2 PCIe fpga resets   Holger Brunck
    • [U-Boot] [PATCH v2 13/14] arm/km: add implementation for read_dip_switch   Holger Brunck
    • [U-Boot] [PATCH v2 14/14] arm/km: remove calls to kw_gpio_* in board_early_init_f   Holger Brunck
    • [U-Boot] [PATCH v2 02/14] arm/km: add kmcoge5un board support   Holger Brunck
    • [U-Boot] [PATCH v2 07/14] arm/km: cleanup km_kirkwood boards   Holger Brunck
• [U-Boot] [PATCH] integrator: break out common config   Linus Walleij
• [U-Boot] [PATCH] omap4: Use a smaller M,N couple for IVA DPLL   Tom Rini
  • [U-Boot] [PATCH] omap4: Use a smaller M,N couple for IVA DPLL   Jan, Sebastien
    • [U-Boot] [PATCH v2] omap4: Use a smaller M,N couple for IVA DPLL   Sebastien Jan
    • [U-Boot] [PATCH v2] omap4: Use a smaller M, N couple for IVA DPLL   Tom Rini
    • [U-Boot] [PATCH v2 0/19] tegra: Add display driver and LCD support for Seaboard   Simon Glass
    • [U-Boot] [PATCH v2 01/19] Add gpio_request() to asm-generic header   Simon Glass
    • [U-Boot] [PATCH v2 03/19] fdt: Add function to look up a phandle's register address   Simon Glass
    • [U-Boot] [PATCH v2 03/19] fdt: Add function to look up a phandle's register address   Stephen Warren
    • [U-Boot] [PATCH v2 0/19] tegra: Add display driver and LCD support for Seaboard   Stephen Warren
    • [U-Boot] [PATCH v2 0/19] tegra: Add display driver and LCD support for Seaboard   Stephen Warren
    • [U-Boot] [PATCH v2 0/19] tegra: Add display driver and LCD support for Seaboard   Stephen Warren
    • [U-Boot] [PATCH v2 0/19] tegra: Add display driver and LCD support for Seaboard   Tom Warren
    • [U-Boot] [PATCH v2 0/19] tegra: Add display driver and LCD support for Seaboard   Simon Glass
    • [U-Boot] [PATCH v2 02/19] fdt: Add debugging to fdtdec_get_int/addr()   Simon Glass
    • [U-Boot] [PATCH v2 04/19] fdt: Add header guard to fdtdec.h   Simon Glass
    • [U-Boot] [PATCH v2 05/19] tegra: Use const for pinmux_config_pingroup/table()   Simon Glass
    • [U-Boot] [PATCH v2 06/19] tegra: Add display support to funcmux   Simon Glass
    • [U-Boot] [PATCH v2 06/19] tegra: Add display support to funcmux   Stephen Warren
    • [U-Boot] [PATCH v2 07/19] tegra: fdt: Add LCD definitions for Tegra   Simon Glass
    • [U-Boot] [PATCH v2 07/19] tegra: fdt: Add LCD definitions for Tegra   Stephen Warren
    • [U-Boot] [PATCH v2 08/19] tegra: Add support for PWFM   Simon Glass
    • [U-Boot] [PATCH v2 08/19] tegra: Add support for PWFM   Stephen Warren
    • [U-Boot] [PATCH v2 09/19] tegra: Add SOC support for display/lcd   Simon Glass
    • [U-Boot] [PATCH v2 09/19] tegra: Add SOC support for display/lcd   Stephen Warren
    • [U-Boot] [PATCH v2 10/19] tegra: Add LCD driver   Simon Glass
    • [U-Boot] [PATCH v2 10/19] tegra: Add LCD driver   Stephen Warren
    • [U-Boot] [PATCH v2 11/19] tegra: Add LCD support to Nvidia boards   Simon Glass
    • [U-Boot] [PATCH v2 11/19] tegra: Add LCD support to Nvidia boards   Stephen Warren
    • [U-Boot] [PATCH v2 12/19] arm: Add control over cachability of memory regions   Simon Glass
    • [U-Boot] [PATCH v2 12/19] arm: Add control over cachability of memory regions   Stephen Warren
    • [U-Boot] [PATCH v2 13/19] lcd: Add CONFIG_LCD_ALIGNMENT to select frame buffer alignment   Simon Glass
    • [U-Boot] [PATCH v2 14/19] lcd: Add support for flushing LCD fb from dcache after update   Simon Glass
    • [U-Boot] [PATCH v2 14/19] lcd: Add support for flushing LCD fb from dcache after update   Stephen Warren
    • [U-Boot] [PATCH v2 15/19] tegra: Align LCD frame buffer to section boundary   Simon Glass
    • [U-Boot] [PATCH v2 16/19] tegra: Support control of cache settings for LCD   Simon Glass
    • [U-Boot] [PATCH v2 17/19] tegra: fdt: Add LCD definitions for Seaboard   Simon Glass
    • [U-Boot] [PATCH v2 18/19] lcd: Add CONSOLE_SCROLL_LINES option to speed console   Simon Glass
    • [U-Boot] [PATCH v2 19/19] tegra: Enable display/lcd support on Seaboard   Simon Glass
• [U-Boot] [PATCH 1/2] patman: Change the location of patman config file   Vikram Narayanan
• [U-Boot] mx53loco build fails with CONFIG_VIDEO disabled   Vikram Narayanan
  • [U-Boot] mx53loco build fails with CONFIG_VIDEO disabled   Fabio Estevam
  • [U-Boot] mx53loco build fails with CONFIG_VIDEO disabled   Stefano Babic
    • [U-Boot] mx53loco build fails with CONFIG_VIDEO disabled   Vikram Narayanan
      • [U-Boot] mx53loco build fails with CONFIG_VIDEO disabled   Fabio Estevam
    • [U-Boot] mx53loco build fails with CONFIG_VIDEO disabled   Fabio Estevam
      • [U-Boot] [PATCH] hawkboard/omapl-138: Add support for generating ais image for hawkboard   Sughosh Ganu
      • [U-Boot] [PATCH] hawkboard/omapl-138: Add support for generating ais image for hawkboard   Tom Rini
      • [U-Boot] [PATCH] hawkboard/omapl-138: Add support for generating ais image for hawkboard   Tom Rini
      • [U-Boot] [PATCH 1/3] BOOT: Fix unused variable issue when enabling bootz support   Stephen Warren
      • [U-Boot] [PATCH 1/3] BOOT: Fix unused variable issue when enabling bootz support   Marek Vasut
      • [U-Boot] [PATCH 1/3] BOOT: Fix unused variable issue when enabling bootz support   Tom Warren
      • [U-Boot] [PATCH 2/3] tegra: enable bootz command   Stephen Warren
      • [U-Boot] [PATCH 3/3] tegra: define fdt_load/fdt_high variables   Stephen Warren
      • [U-Boot] [PATCH] env_onenand: set ONENAND_MAX_ENV_SIZE to CONFIG_ENV_SIZE   David du Colombier
      • [U-Boot] [RFC v2 2/3] mx6qsabrelite: add resetmode support   Troy Kisky
      • [U-Boot] [RFC v2 3/3] mx53evk: add resetmode support   Troy Kisky
      • [U-Boot] [RFC v2 1/3] imx-common/cmd_resetmode.c: add imx resetmode command   Troy Kisky
• [U-Boot] [PATCH 1/1] tegra: seaboard: Initialize multiple USB controllers at once   Jim Lin
  • [U-Boot] [PATCH 1/1] tegra: seaboard: Initialize multiple USB controllers at once   Stephen Warren
    • [U-Boot] [PATCH 1/1] tegra: seaboard: Initialize multiple USB controllers at once   Marek Vasut
      • [U-Boot] [PATCH] arm: omap3: cm-t35: minor comment and printf change   Igor Grinberg
      • [U-Boot] [PATCH] arm: omap3: cm-t35: minor comment and printf change   Tom Rini
      • [U-Boot] [PATCH 1/4] video: omap3_dss: add setup for LCD   Stefano Babic
      • [U-Boot] [PATCH 2/4] OMAP3: added clock definitions for OMAP3 DSS driver   Stefano Babic
      • [U-Boot] [PATCH 4/4] OMAP3: mt_ventoux: add video/ splashscreen support   Stefano Babic
      • [U-Boot] [PATCH 3/4] OMAP3: twister: add video support   Stefano Babic
      • [U-Boot] [PATCH 3/4] OMAP3: twister: add video support   Tom Rini
      • [U-Boot] [PATCH 3/4] OMAP3: twister: add video support   Stefano Babic
      • [U-Boot] [PATCH 1/4] mcx: increased buffer for command line   Stefano Babic
      • [U-Boot] [PATCH 3/4] OMAP3: mcx: updated default environment   Stefano Babic
      • [U-Boot] [PATCH 4/4] OMAP3: mcx: read hot-water-button after reset   Stefano Babic
      • [U-Boot] [PATCH 1/4] mcx: increased buffer for command line   Tom Rini
      • [U-Boot] [PATCH 2/4] OMAP3: mcx: set pinmux for uart4   Stefano Babic
• [U-Boot] [PATCH 1/1] tegra: usb: Fix device enumeration problem of USB1   Jim Lin
  • [U-Boot] [PATCH 1/1] tegra: usb: Fix device enumeration problem of USB1   Stephen Warren
    • [U-Boot] [PATCH 1/1] tegra: usb: Fix device enumeration problem of USB1   Jim Lin
      • [U-Boot] [PATCH 1/1] tegra: usb: Fix device enumeration problem of USB1   Stephen Warren
• [U-Boot] [PATCH 1/6] powerpc/83xx/km: use tuxx1.h for kmsupx5 target   Holger Brunck
  • [U-Boot] [PATCH 1/6] powerpc/83xx/km: use tuxx1.h for kmsupx5 target   Kim Phillips
• [U-Boot] Is RSA algorithm support for the software authentication in u-boot?   Surendra Barku Dhobale
• [U-Boot] FW: Is RSA algorithm support for the software authentication in u-boot?   Surendra Barku Dhobale
  • [U-Boot] FW: Is RSA algorithm support for the software authentication in u-boot?   Marek Vasut
    • [U-Boot] [PATCH] i.MX6 USDHC: Use the ESDHC clock   Dirk Behme
    • [U-Boot] [PATCH] i.MX6 USDHC: Use the ESDHC clock   Stefano Babic
  • [U-Boot] [PATCH] ARM: support for cache coherent allocations   Ilya Yanok
    • [U-Boot] [PATCH] ARM: support for cache coherent allocations   Tom Rini
• [U-Boot] u-boot on c6x CPU ( texas instruments c6000 )   Dmitry Bondar
  • [U-Boot] u-boot on c6x CPU ( texas instruments c6000 )   Marek Vasut
    • [U-Boot] u-boot on c6x CPU ( texas instruments c6000 )   Thomas Petazzoni
      • [U-Boot] [PATCH 0/4] USB and cache related fixes   Tom Rini
      • [U-Boot] [PATCH 1/4] ehci-omap: Do not call dcache_off from omap_ehci_hcd_init   Tom Rini
      • [U-Boot] [PATCH 1/4] ehci-omap: Do not call dcache_off from omap_ehci_hcd_init   Marek Vasut
      • [U-Boot] [PATCH 1/4] ehci-omap: Do not call dcache_off from omap_ehci_hcd_init   Tom Rini
      • [U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions   Tom Rini
      • [U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions   Marek Vasut
      • [U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions   Tom Rini
      • [U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions   Marek Vasut
      • [U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions   R, Sricharan
      • [U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions   Tom Rini
      • [U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions   Marek Vasut
      • [U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions   Tom Rini
      • [U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions   Marek Vasut
      • [U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions   R, Sricharan
      • [U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions   Tom Rini
      • [U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions   R, Sricharan
      • [U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions   Tom Rini
      • [U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions   R, Sricharan
      • [U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions   Tom Rini
      • [U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions   Aneesh V
      • [U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions   Sricharan R
      • [U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions   R, Sricharan
      • [U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions   Aneesh V
      • [U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions   R, Sricharan
      • [U-Boot] [PATCH 2/4] cache_v7: Check for dcache enablement in dcache flush functions   Aneesh V
      • [U-Boot] [PATCH 3/4] ehci-hcd.c: Add a new USB_DMA_MINALIGN define for cache alignment   Tom Rini
      • [U-Boot] [PATCH 3/4] ehci-hcd.c: Add a new USB_DMA_MINALIGN define for cache alignment   Marek Vasut
      • [U-Boot] [PATCH 3/4] ehci-hcd.c: Add a new USB_DMA_MINALIGN define for cache alignment   Tom Rini
      • [U-Boot] [PATCH 3/4] ehci-hcd.c: Add a new USB_DMA_MINALIGN define for cache alignment   Marek Vasut
      • [U-Boot] [PATCH 3/4] ehci-hcd.c: Add a new USB_DMA_MINALIGN define for cache alignment   Tom Rini
      • [U-Boot] [PATCH 3/4] ehci-hcd.c: Add a new USB_DMA_MINALIGN define for cache alignment   Marek Vasut
      • [U-Boot] [PATCH 4/4] musb_core.h: Add a new USB_DMA_MINALIGN define for cache alignment   Tom Rini
      • [U-Boot] [PATCH v2 0/3] USB and cache related fixes   Tom Rini
      • [U-Boot] [PATCH v2 2/3] cache_v7: Check for dcache enablement in dcache flush functions   Tom Rini
      • [U-Boot] [PATCH v2 3/3] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Tom Rini
      • [U-Boot] [PATCH v3 0/6] USB and cache related fixes   Tom Rini
      • [U-Boot] [PATCH v3 1/6] ehci-omap: Do not call dcache_off from omap_ehci_hcd_init   Tom Rini
      • [U-Boot] [PATCH v3 2/6] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Tom Rini
      • [U-Boot] [PATCH v3 2/6] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Marek Vasut
      • [U-Boot] [PATCH v3 2/6] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Tom Rini
      • [U-Boot] [PATCH v3 2/6] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Marek Vasut
      • [U-Boot] [PATCH v3 2/6] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Tom Rini
      • [U-Boot] [PATCH v3 2/6] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Marek Vasut
      • [U-Boot] [PATCH v3 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Tom Rini
      • [U-Boot] [PATCH v3 4/6] omap3_beagle: Disable DCACHE since USB EHCI is enabled   Tom Rini
      • [U-Boot] [PATCH v3 5/6] omap4_panda: Disable DCACHE since USB EHCI is enabled   Tom Rini
      • [U-Boot] [PATCH v3 6/6] tam3517-common: Disable DCACHE since USB EHCI is enabled   Tom Rini
      • [U-Boot] [PATCH v4 0/6] USB and cache related fixes   Tom Rini
      • [U-Boot] [PATCH v4 1/6] ehci-omap: Do not call dcache_off from omap_ehci_hcd_init   Tom Rini
      • [U-Boot] [PATCH v4 2/6] ehci-hcd.c, musb_core, usb.h: Add USB_DMA_MINALIGN define for cache alignment   Tom Rini
      • [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Tom Rini
      • [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Ilya Yanok
      • [U-Boot] [PATCH v4 4/6] omap3_beagle: Disable DCACHE since USB EHCI is enabled   Tom Rini
      • [U-Boot] [PATCH v4 5/6] omap4_panda: Disable DCACHE since USB EHCI is enabled   Tom Rini
      • [U-Boot] [PATCH v4 5/6] omap4_panda: Disable DCACHE since USB EHCI is enabled   Sricharan R
      • [U-Boot] [PATCH v4 5/6] omap4_panda: Disable DCACHE since USB EHCI is enabled   R, Sricharan
      • [U-Boot] [PATCH v4 6/6] tam3517-common: Disable DCACHE since USB EHCI is enabled   Tom Rini
      • [U-Boot] [PATCH 0/4] USB and cache related fixes   Marek Vasut
      • [U-Boot] [PATCH 0/4] USB and cache related fixes   Tom Rini
      • [U-Boot] [PATCH 0/4] USB and cache related fixes   Marek Vasut
      • [U-Boot] [PATCH v2 1/3] ehci-omap: Do not call dcache_off from omap_ehci_hcd_init   Tom Rini
    • [U-Boot] [PATCH 1/2 V2] PMIC: MAX77686: Add support for MAX77686   Joonyoung Shim
• [U-Boot] am35xx, twister: could not write nand flash   Heiko Schocher
  • [U-Boot] am35xx, twister: could not write nand flash   Scott Wood
• [U-Boot] [PATCH] mx6: Make pad name macro consistent with the datasheet   Ashok
  • [U-Boot] [PATCH] mx6: Make pad name macro consistent with the datasheet   Marek Vasut
• [U-Boot] USB DFU support into mailline.   Sohanpal, Harman
  • [U-Boot] USB DFU support into mailline.   Marek Vasut
    • [U-Boot] USB DFU support into mailline.   Lukasz Majewski
      • [U-Boot] USB DFU support into mailline.   Sohanpal, Harman
      • [U-Boot] USB DFU support into mailline.   Lukasz Majewski
      • [U-Boot] USB DFU support into mailline.   Tom Rini
      • [U-Boot] USB DFU support into mailline.   Lukasz Majewski
      • [U-Boot] USB DFU support into mailline.   Tom Rini
• [U-Boot] [PATCH] powerpc/83xx: increment malloc heap size for the MPC832x MDS boards   Kim Phillips
• [U-Boot] [PATCH 0/6] further updates for keymile powerpc 83xx boards   Kim Phillips
  • [U-Boot] [GIT PULL] u-boot-mpc83xx: keymile boards updates   Kim Phillips
    • [U-Boot] [GIT PULL] u-boot-mpc83xx: keymile boards updates   Wolfgang Denk
• [U-Boot] [PATCH] ARM: support for cache coherent allocations   Marek Vasut
  • [U-Boot] [PATCH] ARM: support for cache coherent allocations   Ilya Yanok
    • [U-Boot] [PATCH] ARM: support for cache coherent allocations   Marek Vasut
      • [U-Boot] [PATCH] ARM: support for cache coherent allocations   Ilya Yanok
• [U-Boot] [PATCH v4] tx25: Use generic gpio_* calls   Vikram Narayanan
  • [U-Boot] [PATCH v4] tx25: Use generic gpio_* calls   Fabio Estevam
  • [U-Boot] [PATCH v4] tx25: Use generic gpio_* calls   Stefano Babic
    • [U-Boot] [PATCH 0/3] i.MX refactoring patchset   Otavio Salvador
    • [U-Boot] [PATCH 1/3] imx: Use a clear identification of an unidentified CPU type   Otavio Salvador
    • [U-Boot] [PATCH 1/3] imx: Use a clear identification of an unidentified CPU type   Fabio Estevam
    • [U-Boot] [PATCH 1/3] imx: Use a clear identification of an unidentified CPU type   Otavio Salvador
    • [U-Boot] [PATCH 1/3] imx: Use a clear identification of an unidentified CPU type   Fabio Estevam
    • [U-Boot] [PATCH 1/3] imx: Use a clear identification of an unidentified CPU type   Otavio Salvador
    • [U-Boot] [PATCH 1/3] imx: Use a clear identification of an unidentified CPU type   Marek Vasut
    • [U-Boot] [PATCH 1/3] imx: Use a clear identification of an unidentified CPU type   Stefano Babic
    • [U-Boot] [PATCH 1/3] imx: Use a clear identification of an unidentified CPU type   Otavio Salvador
    • [U-Boot] [PATCH 1/3] imx: Use a clear identification of an unidentified CPU type   Marek Vasut
    • [U-Boot] [PATCH 1/3] imx: Use a clear identification of an unidentified CPU type   Otavio Salvador
    • [U-Boot] [PATCH 1/3] imx: Use a clear identification of an unidentified CPU type   Stefano Babic
    • [U-Boot] [PATCH 1/3] imx: Use a clear identification of an unidentified CPU type   Marek Vasut
    • [U-Boot] [PATCH 1/3] imx: Use a clear identification of an unidentified CPU type   Marek Vasut
    • [U-Boot] [PATCH 2/3] mxs: generalize code for print_cpuinfo()   Otavio Salvador
    • [U-Boot] [PATCH 2/3] mxs: generalize code for print_cpuinfo()   Fabio Estevam
    • [U-Boot] [PATCH 2/3] mxs: generalize code for print_cpuinfo()   Fabio Estevam
    • [U-Boot] [PATCH 2/3] mxs: generalize code for print_cpuinfo()   Marek Vasut
    • [U-Boot] [PATCH 2/3] mxs: generalize code for print_cpuinfo()   Fabio Estevam
    • [U-Boot] [PATCH 2/3] mxs: generalize code for print_cpuinfo()   Otavio Salvador
    • [U-Boot] [PATCH 2/3] mxs: generalize code for print_cpuinfo()   Marek Vasut
    • [U-Boot] [PATCH 2/3] mxs: generalize code for print_cpuinfo()   Otavio Salvador
    • [U-Boot] [PATCH 2/3] mxs: generalize code for print_cpuinfo()   Marek Vasut
    • [U-Boot] [PATCH 2/3] mxs: generalize code for print_cpuinfo()   Stefano Babic
    • [U-Boot] [PATCH 2/3] mxs: generalize code for print_cpuinfo()   Marek Vasut
    • [U-Boot] [PATCH 2/3] mxs: generalize code for print_cpuinfo()   Stefano Babic
    • [U-Boot] [PATCH 2/3] mxs: generalize code for print_cpuinfo()   Otavio Salvador
    • [U-Boot] [PATCH 2/3] mxs: generalize code for print_cpuinfo()   Marek Vasut
    • [U-Boot] [PATCH 2/3] mxs: generalize code for print_cpuinfo()   Marek Vasut
    • [U-Boot] [PATCH 2/3] mxs: generalize code for print_cpuinfo()   Otavio Salvador
    • [U-Boot] [PATCH 3/3] mx28evk: extend default environment   Otavio Salvador
    • [U-Boot] [PATCH 0/3] i.MX refactoring patchset   Marek Vasut
• [U-Boot] Environement in NVRAM   Ran Shalit
  • [U-Boot] Environement in NVRAM   Marek Vasut
• [U-Boot] please pull u-boot-samsung/master   Minkyu Kang
  • [U-Boot] please pull u-boot-samsung/master   Albert ARIBAUD
• [U-Boot] [U-Boot-Users] Secure Bootloader patch   Surendra Barku Dhobale
  • [U-Boot] [U-Boot-Users] Secure Bootloader patch   Stefano Babic
  • [U-Boot] [PATCH] i.MX28: Add function to adjust memory parameters   Fabio Estevam
    • [U-Boot] [PATCH] i.MX28: Add function to adjust memory parameters   Marek Vasut
      • [U-Boot] [PATCH] i.MX28: Add function to adjust memory parameters   Stefano Babic
      • [U-Boot] [PATCH] i.MX28: Add function to adjust memory parameters   Marek Vasut
      • [U-Boot] [PATCH] i.MX28: Add function to adjust memory parameters   Marek Vasut
      • [U-Boot] [PATCH] i.MX28: Add function to adjust memory parameters   Stefano Babic
      • [U-Boot] [PATCH] i.MX28: Add function to adjust memory parameters   Marek Vasut
      • [U-Boot] [PATCH] doc: README.mx28_common: Add missing entry into Contents   Fabio Estevam
      • [U-Boot] [PATCH] doc: README.mx28_common: Add missing entry into Contents   Marek Vasut
      • [U-Boot] [PATCH v2] doc: README.mx28_common: Add missing entry into Contents   Fabio Estevam
      • [U-Boot] [PATCH v3] doc: README.mx28_common: Add missing entry into Contents   Fabio Estevam
      • [U-Boot] [PATCH v3] doc: README.mx28_common: Add missing entry into Contents   Marek Vasut
      • [U-Boot] [PATCH 00/11] support for ST-Ericsson snowball board   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 01/11] snowball: Add support for ux500 based snowball board   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 03/11] snowball: Adding architecture dependent initialisation   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 04/11] snowball: Adding CPU clock initialisation   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 05/11] snowball: Moving to ux500.v2 addess scheme for PRCMU access   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 06/11] snowball: applying power to LAN and GBF controllers   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 07/11] u8500: Moving processor-specific functions to cpu area.   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 08/11] u8500: Enabling power to MMC device on AB8500 V2   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 09/11] u8500: Separating mmc config parameters from driver   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 10/11] armv7: Adding cpu specific cache managmenent   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 11/11] snowball: Adding board specific cache cleanup routine   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 02/11] u8500: Moving prcmu to cpu directory   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 00/11] support for ST-Ericsson snowball board   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 01/11] snowball: Add support for ux500 based snowball board   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 01/11] snowball: Add support for ux500 based snowball board   Tom Rini
      • [U-Boot] [PATCH 01/11] snowball: Add support for ux500 based snowball board   Mathieu Poirier
      • [U-Boot] [PATCH 02/11] u8500: Moving prcmu to cpu directory   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 03/11] snowball: Adding architecture dependent initialisation   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 04/11] snowball: Adding CPU clock initialisation   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 05/11] snowball: Moving to ux500.v2 addess scheme for PRCMU access   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 06/11] snowball: applying power to LAN and GBF controllers   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 07/11] u8500: Moving processor-specific functions to cpu area.   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 08/11] u8500: Enabling power to MMC device on AB8500 V2   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 09/11] u8500: Separating mmc config parameters from driver   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 10/11] armv7: Adding cpu specific cache managmenent   mathieu.poirier at linaro.org
      • [U-Boot] [PATCH 10/11] armv7: Adding cpu specific cache managmenent   Tom Rini
      • [U-Boot] [PATCH 11/11] snowball: Adding board specific cache cleanup routine   mathieu.poirier at linaro.org
• [U-Boot] mx51evk: Fix build error when CONFIG_VIDEO is disabled   Vikram Narayanan
• [U-Boot] mx53loco: Fix build error when CONFIG_VIDEO is disabled   Vikram Narayanan
  • [U-Boot] [PATCH] usb_storage: fix ehci driver max transfer size   Stefan Herbrechtsmeier
  • [U-Boot] [PATCH] usb_storage: fix ehci driver max transfer size   Marek Vasut
  • [U-Boot] [PATCH] powerpc/mpc83xx: fix copyright string in serdes.c   Timur Tabi
• [U-Boot] [PATCH] config.mk:Update DBGFLAGS with dwarf information   Prabhakar Kushwaha
  • [U-Boot] [PATCH] config.mk:Update DBGFLAGS with dwarf information   Prabhakar Kushwaha
    • [U-Boot] [PATCH] config.mk:Update DBGFLAGS with dwarf information   Graeme Russ
    • [U-Boot] [PATCH] config.mk:Update DBGFLAGS with dwarf information   Wolfgang Denk
      • [U-Boot] [PATCH] config.mk:Update DBGFLAGS with dwarf information   Prabhakar Kushwaha
      • [U-Boot] [PATCH 0/8 V3] EXYNOS5: Enable I2C support   Rajeshwari Shinde
      • [U-Boot] [PATCH 1/8 V3] EXYNOS: CLK: Add i2c clock   Rajeshwari Shinde
      • [U-Boot] [PATCH 2/8 V3] EXYNOS: Add I2C base address.   Rajeshwari Shinde
      • [U-Boot] [PATCH 3/8 V3] EXYNOS: PINMUX: Add pinmux support for I2C   Rajeshwari Shinde
      • [U-Boot] [PATCH 4/8 V3] I2C: Move struct s3c24x0_i2c to a common place.   Rajeshwari Shinde
      • [U-Boot] [PATCH 5/8 V3] I2C: S3C24X0: Add offset to calculate next i2c channel base address   Rajeshwari Shinde
      • [U-Boot] [PATCH 6/8 V3] I2C: Modify the I2C driver for EXYNOS5   Rajeshwari Shinde
      • [U-Boot] [PATCH 7/8 V3] I2C: Add support for Multi channel   Rajeshwari Shinde
      • [U-Boot] [PATCH 8/8 V3] CONFIG: SMDK5250: I2C: Enable I2C   Rajeshwari Shinde
• [U-Boot] [PATCH] i.MX28: Add function to adjust memory parameters   Stefano Babic
  • [U-Boot] [PATCH 0/8 V4] EXYNOS5: Enable I2C support   Rajeshwari Shinde
  • [U-Boot] [PATCH 1/8 V4] EXYNOS: CLK: Add i2c clock   Rajeshwari Shinde
  • [U-Boot] [PATCH 2/8 V4] EXYNOS: Add I2C base address.   Rajeshwari Shinde
  • [U-Boot] [PATCH 3/8 V4] EXYNOS: PINMUX: Add pinmux support for I2C   Rajeshwari Shinde
  • [U-Boot] [PATCH 4/8 V4] I2C: Move struct s3c24x0_i2c to a common place.   Rajeshwari Shinde
  • [U-Boot] [PATCH 5/8 V4] I2C: S3C24X0: Add offset to calculate next i2c channel base address   Rajeshwari Shinde
  • [U-Boot] [PATCH 6/8 V4] I2C: Modify the I2C driver for EXYNOS5   Rajeshwari Shinde
  • [U-Boot] [PATCH 6/8 V4] I2C: Modify the I2C driver for EXYNOS5   Joonyoung Shim
  • [U-Boot] [PATCH 6/8 V4] I2C: Modify the I2C driver for EXYNOS5   Rajeshwari Birje
  • [U-Boot] [PATCH 6/8 V4] I2C: Modify the I2C driver for EXYNOS5   Minkyu Kang
  • [U-Boot] [PATCH 6/8 V4] I2C: Modify the I2C driver for EXYNOS5   Rajeshwari Birje
  • [U-Boot] [PATCH 6/8 V4] I2C: Modify the I2C driver for EXYNOS5   Joonyoung Shim
  • [U-Boot] [PATCH 7/8 V4] I2C: Add support for Multi channel   Rajeshwari Shinde
  • [U-Boot] [PATCH 8/8 V4] CONFIG: SMDK5250: I2C: Enable I2C   Rajeshwari Shinde
  • [U-Boot] [PATCH 0/8 V4] EXYNOS5: Enable I2C support   Chander Kashyap
• [U-Boot] [PATCH v2 1/1] tegra: usb: Fix device enumeration problem of USB1   Jim Lin
  • [U-Boot] [PATCH v2 1/1] tegra: usb: Fix device enumeration problem of USB1   Stephen Warren
    • [U-Boot] [PATCH v2 1/1] tegra: usb: Fix device enumeration problem of USB1   Marek Vasut
• [U-Boot] splash screen on uboot 1.3.4   Gigin Jose
  • [U-Boot] splash screen on uboot 1.3.4   Wolfgang Denk
    • [U-Boot] [PATCH 01/11 v2] snowball: Add support for ux500 based snowball board   mathieu.poirier at linaro.org
    • [U-Boot] [PATCH 03/11 v2] snowball: Adding architecture dependent initialisation   mathieu.poirier at linaro.org
    • [U-Boot] [PATCH 06/11 v2] snowball: applying power to LAN and GBF controllers   mathieu.poirier at linaro.org
    • [U-Boot] [PATCH 10/11 v2] armv7: Adding cpu specific cache managmenent   mathieu.poirier at linaro.org
• [U-Boot] Relocation issue on armv7 targets   jagan
  • [U-Boot] Relocation issue on armv7 targets   Tom Rini
  • [U-Boot] Relocation issue on armv7 targets   Aneesh V
    • [U-Boot] Relocation issue on armv7 targets   JagannadhaSutradharudu Teki
    • [U-Boot] Relocation issue on armv7 targets   Wolfgang Denk
    • [U-Boot] [PATCH] mx28evk: Fix boot by adjusting HW_DRAM_CTL29 register   Fabio Estevam
    • [U-Boot] [PATCH] mx28evk: Fix boot by adjusting HW_DRAM_CTL29 register   Marek Vasut
    • [U-Boot] [PATCH] mx28evk: Fix boot by adjusting HW_DRAM_CTL29 register   Fabio Estevam
• [U-Boot] [PATCH 1/3] cmd_mem: replace custom PRINTF() with debug()   Wolfgang Denk
• [U-Boot] [PATCH 2/3] cmd_mem: cmp: unify size code paths   Wolfgang Denk
• [U-Boot] [PATCH 3/3] cmd_mem: cmp: convert while() to for() loop   Wolfgang Denk
• [U-Boot] [PATCH 1/2] easylogo: add lzma support   Wolfgang Denk
• [U-Boot] [PATCH] lmb: do not export anything without CONFIG_LMB   Wolfgang Denk
• [U-Boot] [PATCH v2 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there   Wolfgang Denk
  • [U-Boot] [PATCH v2 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there   Tom Rini
  • [U-Boot] [PATCH v2 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there   Tom Rini
• [U-Boot] [PATCH 1/2] patman: Change the location of patman config file   Wolfgang Denk
• [U-Boot] [PATCH 2/2] patman: Handle creation of patman config file   Wolfgang Denk
  • [U-Boot] [PATCH v4 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there   Tom Rini
  • [U-Boot] [PATCH v4 2/2] hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c   Tom Rini
  • [U-Boot] [PATCH v4 2/2] hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c   Stefano Babic
  • [U-Boot] [PATCH v4 2/2] hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c   Wolfgang Denk
  • [U-Boot] [PATCH v4 1/2] CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there   Wolfgang Denk
• [U-Boot] [PATCH] EXYNOS: PINMUX: modify the gpio function value for mmc   Jaehoon Chung
  • [U-Boot] [PATCH] EXYNOS: PINMUX: modify the gpio function value for mmc   Rajeshwari Birje
    • [U-Boot] [PATCH] EXYNOS: PINMUX: modify the gpio function value for mmc   Jaehoon Chung
• [U-Boot] [PATCH] EXYNOS5: GPIO: fix wrong gpio bank offset   Jaehoon Chung
• [U-Boot] [PATCH v3 1/1] tegra: usb: Fix device enumeration problem of USB1   Jim Lin
  • [U-Boot] [PATCH v3 1/1] tegra: usb: Fix device enumeration problem of USB1   Stephen Warren
    • [U-Boot] [PATCH 0/9]EXYNOS5: Support for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 1/9] ARCH: SPL: Add parametric board initializer   Rajeshwari Shinde
    • [U-Boot] [PATCH 2/9] SMDK5250: SPL: Define parametric board initializer   Rajeshwari Shinde
    • [U-Boot] [PATCH 3/9] SMDK5250: Add smdk5250-uboot-spl.lds   Rajeshwari Shinde
    • [U-Boot] [PATCH 4/9] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 4/9] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0   Joonyoung Shim
    • [U-Boot] [PATCH 4/9] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0   Rajeshwari Birje
    • [U-Boot] [PATCH 5/9] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 6/9] Exynos5: DDR3: Adding the DDR3 memory setup for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 7/9] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 7/9] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0   Joonyoung Shim
    • [U-Boot] [PATCH 8/9] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 9/9] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 0/9]EXYNOS5: Support for Exynos5250 Rev 1.0   Jaehoon Chung
    • [U-Boot] [PATCH 0/9]EXYNOS5: Support for Exynos5250 Rev 1.0   Rajeshwari Birje
    • [U-Boot] [PATCH 0/9 V2]EXYNOS5: Support for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 1/9 V2] ARCH: SPL: Add parametric board initializer   Rajeshwari Shinde
    • [U-Boot] [PATCH 2/9 V2] SMDK5250: SPL: Define parametric board initializer   Rajeshwari Shinde
    • [U-Boot] [PATCH 3/9 V2] SMDK5250: Add smdk5250-uboot-spl.lds   Rajeshwari Shinde
    • [U-Boot] [PATCH 4/9 V2] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 4/9 V2] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0   Minkyu Kang
    • [U-Boot] [PATCH 5/9 V2] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 6/9 V2] Exynos5: DDR3: Adding the DDR3 memory setup for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 7/9 V2] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 7/9 V2] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0   Minkyu Kang
    • [U-Boot] [PATCH 8/9 V2] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 8/9 V2] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0   Jaehoon Chung
    • [U-Boot] [PATCH 8/9 V2] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0   Rajeshwari Birje
    • [U-Boot] [PATCH 9/9 V2] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 9/9 V2] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0   Minkyu Kang
  • [U-Boot] (no subject)   Pascal Levesque
    • [U-Boot] [PATCH] ARMv7: Add register definition of global timer   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 1/2] arm: rmobile: Add basic support for Renesas R-Mobile   Nobuhiro Iwamatsu
    • [U-Boot] [PATCH 1/2] arm: rmobile: Add support Renesas SH73A0   Nobuhiro Iwamatsu
• [U-Boot] [PATCH v4 1/1] tegra: usb: Fix device enumeration problem of USB1   Jim Lin
  • [U-Boot] [PATCH v4 1/1] tegra: usb: Fix device enumeration problem of USB1   Stephen Warren
  • [U-Boot] [PATCH v4 1/1] tegra: usb: Fix device enumeration problem of USB1   Marek Vasut
    • [U-Boot] [PATCH v4 1/1] tegra: usb: Fix device enumeration problem of USB1   Jim Lin
      • [U-Boot] [PATCH v4 1/1] tegra: usb: Fix device enumeration problem of USB1   Marek Vasut
      • [U-Boot] [PATCH] sh: Add support pin function control using GPIO   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH] sh: Add support pin function control using GPIO   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH] arm: rmobile: Add supoprt for KMC KZM-A9-GT board   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH] arm: rmobile: Add supoprt for KMC KZM-A9-GT board   Albert ARIBAUD
      • [U-Boot] [PATCH] arm: rmobile: Add supoprt for KMC KZM-A9-GT board   Nobuhiro Iwamatsu
      • [U-Boot] [PATCH] arm: rmobile: Add supoprt for KMC KZM-A9-GT board   Wolfgang Denk
      • [U-Boot] [PATCH] arm: rmobile: Add supoprt for KMC KZM-A9-GT board   Nobuhiro Iwamatsu
• [U-Boot] net: sh_eth: fix build error when CONFIG_CPU_SH7757 is set   Shimoda, Yoshihiro
  • [U-Boot] net: sh_eth: fix build error when CONFIG_CPU_SH7757 is set   Nobuhiro Iwamatsu
• [U-Boot] net: sh_eth: fix build error when CONFIG_CPU_SH7757 is set   Shimoda, Yoshihiro
  • [U-Boot] [PATCH] Atmel : usb : add EHCI driver for Atmel SoC   Bo Shen
  • [U-Boot] [PATCH] Atmel : usb : add EHCI driver for Atmel SoC   Marek Vasut
  • [U-Boot] [PATCH] Atmel : usb : add EHCI driver for Atmel SoC   Bo Shen
  • [U-Boot] [PATCH] Atmel : usb : add EHCI driver for Atmel SoC   Marek Vasut
  • [U-Boot] [PATCH] Atmel : usb : add EHCI driver for Atmel SoC   Bo Shen
  • [U-Boot] [PATCH] Atmel : usb : add EHCI driver for Atmel SoC   Marek Vasut
  • [U-Boot] [PATCH] Atmel : usb : add EHCI driver for Atmel SoC   Bo Shen
  • [U-Boot] [PATCH] Atmel : usb : add EHCI driver for Atmel SoC   Andreas Bießmann
  • [U-Boot] [PATCH] Atmel : usb : add EHCI driver for Atmel SoC   Wolfgang Denk
  • [U-Boot] [PATCH v3 0/9] feature additions and fixes for da850/omap-l138   Prabhakar Lad
  • [U-Boot] [PATCH v3 1/9] da850/omap-l138: Add MMC support for DA850/OMAP-L138   Prabhakar Lad
  • [U-Boot] [PATCH v3 2/9] da850/omap-l138: modifications for Logic PD Rev.3 AM18xx EVM   Prabhakar Lad
  • [U-Boot] [PATCH v3 2/9] da850/omap-l138: modifications for Logic PD Rev.3 AM18xx EVM   Christian Riesch
  • [U-Boot] [PATCH v3 3/9] da850/omap-l138: Make MMC and NOR support mutually exclusive   Prabhakar Lad
  • [U-Boot] [PATCH v3 4/9] arm, davinci: perform check for initalizing global data and serial init   Prabhakar Lad
  • [U-Boot] [PATCH v3 4/9] arm, davinci: perform check for initalizing global data and serial init   Christian Riesch
  • [U-Boot] [PATCH v3 5/9] da850/omap-l138: Define SPI specific configs for SPL only when SPI is used   Prabhakar Lad
  • [U-Boot] [PATCH v3 6/9] da850/omap-l138: Add support to read u-boot image from MMC/SD   Prabhakar Lad
  • [U-Boot] [PATCH v3 7/9] da850/omap-l138: Fix NAND flash timings   Prabhakar Lad
  • [U-Boot] [PATCH v3 8/9] da850/omap-l138: Add support for NAND SPL   Prabhakar Lad
  • [U-Boot] [PATCH v3 9/9] da850/omap-l138: add support for direct NOR boot mode   Prabhakar Lad
  • [U-Boot] [PATCH v3 0/9] feature additions and fixes for da850/omap-l138   Christian Riesch
  • [U-Boot] [PATCH v3 0/9] feature additions and fixes for da850/omap-l138   Tom Rini
  • [U-Boot] [PATCH 1/2] OMAP4: clocks-common: prevent USB DPLL from being stuck in running state   Roger Quadros
  • [U-Boot] [PATCH 1/2] OMAP4: clocks-common: prevent USB DPLL from being stuck in running state   Tero Kristo
  • [U-Boot] [PATCH 1/2] OMAP4: clocks-common: prevent USB DPLL from being stuck in running state   R, Sricharan
    • [U-Boot] [PATCH 1/2] OMAP4: clocks-common: prevent USB DPLL from being stuck in running state   Roger Quadros
• [U-Boot] [PATCH 1/2] OMAP4: clocks-common: prevent USB DPLL from being stuck in running state   R, Sricharan
  • [U-Boot] [PATCH 1/2] OMAP4: clocks-common: prevent USB DPLL from being stuck in running state   Roger Quadros
    • [U-Boot] [PATCH 1/2] OMAP4: clocks-common: prevent USB DPLL from being stuck in running state   Tero Kristo
  • [PATCH] ARM: OMAP4: clock: setup USB DPLL during init   Tero Kristo
• [U-Boot] Freescale mpc8641hpcn board saveenv hang   TP.Thiesen at gmx.de
  • [U-Boot] [PATCH 0/3] OMAP: Detect reset type and handle sdram init after warm rese   Tom Rini
  • [U-Boot] [PATCH] omap: am33xx: accomodate input clocks other than 24 Mhz   Tom Rini
  • [U-Boot] [PATCH 0/3] omap: fix bugs in automatic emif setup code   Tom Rini
• [U-Boot] [PATCH] Strip fw_printenv like the other tools   Wolfgang Denk
• [U-Boot] [PATCH] bootstage: Fix build error for standalone API example   Wolfgang Denk
  • [U-Boot] [PATCH] bootstage: Fix build error for standalone API example   Simon Glass
• [U-Boot] [PATCH V2] Block: Remove MG DISK support   Wolfgang Denk
• [U-Boot] [PATCH 0/6] add zip command support for uboot   Wolfgang Denk
• [U-Boot] [PATCH] checkpatch: add check for whitespace before semicolon at end-of-line   Wolfgang Denk
  • [U-Boot] [PATCH 1/2] microblaze: avoid compile error on systems without cfi flash   Stephan Linz
  • [U-Boot] [PATCH 1/2] microblaze: avoid compile error on systems without cfi flash   Michal Simek
  • [U-Boot] [PATCH 1/2] microblaze: avoid compile error on systems without cfi flash   Stephan Linz
  • [U-Boot] [PATCH 1/2] microblaze: avoid compile error on systems without cfi flash   Michal Simek
  • [U-Boot] [PATCH 1/2] microblaze: avoid compile error on systems without cfi flash   Stephan Linz
  • [U-Boot] [PATCH 2/2] microblaze: Enable ubi support   Stephan Linz
  • [U-Boot] [PATCH 2/2] microblaze: Enable ubi support   Michal Simek
  • [U-Boot] [PATCH 2/2] microblaze: Enable ubi support   Wolfgang Denk
  • [U-Boot] [PATCH 2/2] microblaze: Enable ubi support   Stephan Linz
  • [U-Boot] [PATCH 2/2] microblaze: Enable ubi support   Michal Simek
  • [U-Boot] [PATCH 2/2] microblaze: Enable ubi support   Stephan Linz
• [U-Boot] [PATCH] mx28evk: Add I2C support   Wolfgang Denk
• [U-Boot] [PATCH 1/2] MSM7x27a:Add support for interrupt   Wolfgang Denk
  • [U-Boot] [PATCH 1/1] net: phy: micrel: make ksz9021 phy accessible   Troy Kisky
  • [U-Boot] [PATCH 1/1] net: phy: micrel: make ksz9021 phy accessible   Vladimir Zapolskiy
• [U-Boot] [PATCH 1/3] MX28: Add u-boot.mx28.sd and u-boot.mx28.nand make targets   Wolfgang Denk
  • [U-Boot] [PATCH 1/3] MX28: Add u-boot.mx28.sd and u-boot.mx28.nand make targets   Marek Vasut
    • [U-Boot] [PATCH 1/3] MX28: Add u-boot.mx28.sd and u-boot.mx28.nand make targets   Wolfgang Denk
• [U-Boot] [PATCH 1/7] menu: only timeout when menu is displayed   Wolfgang Denk
• [U-Boot] [PATCH v2] pxe: support include files at top-level   Wolfgang Denk
• [U-Boot] [PATCH 3/7] pxe: add support for label menu text   Wolfgang Denk
• [U-Boot] [PATCH 4/7] pxe: support linux entries for labels   Wolfgang Denk
• [U-Boot] [PATCH 5/7] pxe: support absolute paths   Wolfgang Denk
  • [U-Boot] Debugging uboot w/ GDB   Brandon Burnett
    • [U-Boot] Debugging uboot w/ GDB   Wolfgang Denk
• [U-Boot] [PATCH 6/7] pxe: parse initrd file from append string   Wolfgang Denk
• [U-Boot] [PATCH v2] pxe: add support for parsing local syslinux files   Wolfgang Denk
• [U-Boot] [ARM] Backlog   Albert ARIBAUD
  • [U-Boot] [ARM] Backlog   Lucas Stach
    • [U-Boot] [ARM] Backlog   Albert ARIBAUD
    • [U-Boot] [PATCH v4 0/13] split tegra20 arm7 code into separate SPL   Allen Martin
    • [U-Boot] [PATCH v4 01/13] tegra20: rename tegra2 -> tegra20   Allen Martin
    • [U-Boot] [PATCH v4 01/13] tegra20: rename tegra2 -> tegra20   Stephen Warren
    • [U-Boot] [PATCH v4 01/13] tegra20: rename tegra2 -> tegra20   Allen Martin
    • [U-Boot] [PATCH v4 02/13] tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common   Allen Martin
    • [U-Boot] [PATCH v4 02/13] tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common   Stephen Warren
    • [U-Boot] [PATCH v4 02/13] tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common   Allen Martin
    • [U-Boot] [PATCH v4 03/13] tegra20: rename CONFIG_MACH_TEGRA_GENERIC   Allen Martin
    • [U-Boot] [PATCH v4 04/13] tegra20: tec: add tegra20-common-post.h   Allen Martin
    • [U-Boot] [PATCH v4 05/13] tegra20: plutux: change obj directory mkdir commands   Allen Martin
    • [U-Boot] [PATCH v4 05/13] tegra20: plutux: change obj directory mkdir commands   Allen Martin
    • [U-Boot] [PATCH v4 06/13] mkconfig: add support for SPL CPU   Allen Martin
    • [U-Boot] [PATCH v4 07/13] ARM: Fix arm720t SPL build   Allen Martin
    • [U-Boot] [PATCH v4 09/13] ARM: add tegra20 support to arm720t   Allen Martin
    • [U-Boot] [PATCH v4 10/13] tegra20: add u-boot-t2.bin target   Allen Martin
    • [U-Boot] [PATCH v4 11/13] tegra20: move SDRAM param save to later in boot   Allen Martin
    • [U-Boot] [PATCH v4 12/13] tegra20: enable SPL for tegra20 boards   Allen Martin
    • [U-Boot] [PATCH v4 13/13] tegra20: Remove armv4t build flags   Allen Martin
    • [U-Boot] [PATCH v4 13/13] tegra20: Remove armv4t build flags   Stephen Warren
    • [U-Boot] [PATCH v4 08/13] tegra20: remove timer_init from SPL build   Allen Martin
    • [U-Boot] [PATCH 01/24] mxc_i2c: fix i2c_imx_stop   Troy Kisky
    • [U-Boot] [PATCH 02/24] mxc_i2c: remove ifdef of CONFIG_HARD_I2C   Troy Kisky
    • [U-Boot] [PATCH 02/24] mxc_i2c: remove ifdef of CONFIG_HARD_I2C   Marek Vasut
    • [U-Boot] [PATCH 06/24] mxc_i2c.c: code i2c_probe as a 0 length i2c_write   Troy Kisky
    • [U-Boot] [PATCH 06/24] mxc_i2c.c: code i2c_probe as a 0 length i2c_write   Marek Vasut
    • [U-Boot] [PATCH 06/24] mxc_i2c.c: code i2c_probe as a 0 length i2c_write   Stefano Babic
    • [U-Boot] [PATCH 08/24] mxc_i2c: remove redundant read   Troy Kisky
    • [U-Boot] [PATCH 08/24] mxc_i2c: remove redundant read   Marek Vasut
    • [U-Boot] [PATCH 09/24] mxc_i2c: place imx_start code inline   Troy Kisky
    • [U-Boot] [PATCH 09/24] mxc_i2c: place imx_start code inline   Marek Vasut
    • [U-Boot] [PATCH 10/24] mxc_i2c: place i2c_reset code inline   Troy Kisky
    • [U-Boot] [PATCH 10/24] mxc_i2c: place i2c_reset code inline   Marek Vasut
    • [U-Boot] [PATCH 11/24] mxc_i2c: don't disable controller after every transaction   Troy Kisky
    • [U-Boot] [PATCH 13/24] mxc_i2c: check for arbitration lost   Troy Kisky
    • [U-Boot] [PATCH 13/24] mxc_i2c: check for arbitration lost   Marek Vasut
    • [U-Boot] [PATCH 15/24] mxc_i2c: add i2c_regs argument to i2c_imx_stop   Troy Kisky
    • [U-Boot] [PATCH 15/24] mxc_i2c: add i2c_regs argument to i2c_imx_stop   Marek Vasut
    • [U-Boot] [PATCH 16/24] mxc_i2c: prep work for multiple busses support   Troy Kisky
    • [U-Boot] [PATCH 16/24] mxc_i2c: prep work for multiple busses support   Marek Vasut
    • [U-Boot] [PATCH 16/24] mxc_i2c: prep work for multiple busses support   Heiko Schocher
    • [U-Boot] [PATCH 16/24] mxc_i2c: prep work for multiple busses support   Marek Vasut
    • [U-Boot] [PATCH 16/24] mxc_i2c: prep work for multiple busses support   Wolfgang Denk
    • [U-Boot] [PATCH 17/24] mxc_i2c: add bus recovery support   Troy Kisky
    • [U-Boot] [PATCH 17/24] mxc_i2c: add bus recovery support   Heiko Schocher
    • [U-Boot] [PATCH 17/24] mxc_i2c: add bus recovery support   Troy Kisky
    • [U-Boot] [PATCH 18/24] mxc_i2c.c: finish adding CONFIG_I2C_MULTI_BUS support   Troy Kisky
    • [U-Boot] [PATCH 18/24] mxc_i2c.c: finish adding CONFIG_I2C_MULTI_BUS support   Marek Vasut
    • [U-Boot] [PATCH 18/24] mxc_i2c.c: finish adding CONFIG_I2C_MULTI_BUS support   Troy Kisky
    • [U-Boot] [PATCH 18/24] mxc_i2c.c: finish adding CONFIG_I2C_MULTI_BUS support   Tabi Timur-B04825
    • [U-Boot] [PATCH 19/24] iomux-v3: remove include of mx6x_pins.h   Troy Kisky
    • [U-Boot] [PATCH 20/24] i.mx: iomux-v3.h: move to imx-common include directory   Troy Kisky
    • [U-Boot] [PATCH 21/24] i.mx: iomux-v3.c: move to imx-common directory   Troy Kisky
    • [U-Boot] [PATCH 22/24] i.mx53: add definition for I2C3_BASE_ADDR   Troy Kisky
    • [U-Boot] [PATCH 23/24] imx-common: add i2c.c for bus recovery support   Troy Kisky
    • [U-Boot] [PATCH 24/24] mx6qsabrelite: add i2c multi-bus support   Troy Kisky
    • [U-Boot] [PATCH 01/24] mxc_i2c: fix i2c_imx_stop   Marek Vasut
    • [U-Boot] [PATCH 01/24] mxc_i2c: fix i2c_imx_stop   Stefano Babic
    • [U-Boot] [PATCH 03/24] mxc_i2c: create tx_byte function   Troy Kisky
    • [U-Boot] [PATCH 03/24] mxc_i2c: create tx_byte function   Marek Vasut
    • [U-Boot] [PATCH 03/24] mxc_i2c: create tx_byte function   Troy Kisky
    • [U-Boot] [PATCH 03/24] mxc_i2c: create tx_byte function   Marek Vasut
    • [U-Boot] [PATCH 04/24] mxc_i2c: clear i2sr before waiting for bit   Troy Kisky
    • [U-Boot] [PATCH 04/24] mxc_i2c: clear i2sr before waiting for bit   Marek Vasut
    • [U-Boot] [PATCH 04/24] mxc_i2c: clear i2sr before waiting for bit   Troy Kisky
    • [U-Boot] [PATCH 05/24] mxc_i2c: create i2c_init_transfer   Troy Kisky
    • [U-Boot] [PATCH 05/24] mxc_i2c: create i2c_init_transfer   Marek Vasut
    • [U-Boot] [PATCH 05/24] mxc_i2c: create i2c_init_transfer   Stefano Babic
    • [U-Boot] [PATCH 07/24] mxc_i2c: combine i2c_imx_bus_busy and i2c_imx_trx_complete into wait_for_sr_state   Troy Kisky
    • [U-Boot] [PATCH 07/24] mxc_i2c: combine i2c_imx_bus_busy and i2c_imx_trx_complete into wait_for_sr_state   Marek Vasut
    • [U-Boot] [PATCH 07/24] mxc_i2c: combine i2c_imx_bus_busy and i2c_imx_trx_complete into wait_for_sr_state   Troy Kisky
    • [U-Boot] [PATCH 07/24] mxc_i2c: combine i2c_imx_bus_busy and i2c_imx_trx_complete into wait_for_sr_state   Troy Kisky
    • [U-Boot] [PATCH 12/24] mxc_i2c: change slave addr if conflicts with destination.   Troy Kisky
    • [U-Boot] [PATCH 14/24] mxc_i2c: add retries   Troy Kisky
    • [U-Boot] [PATCH 14/24] mxc_i2c: add retries   Marek Vasut
    • [U-Boot] [PATCH 14/24] mxc_i2c: add retries   Troy Kisky
    • [U-Boot] [PATCH 0/3] AM335x: Add USB support in u-boot.   Harman Sohanpal
    • [U-Boot] [PATCH 1/3] AM335x : Add USB support for AM335x in u-boot   Harman Sohanpal
    • [U-Boot] [PATCH 2/3] AM335x : Configs to add USB host support.   Harman Sohanpal
    • [U-Boot] [PATCH 2/3] AM335x : Configs to add USB host support.   Stefan Roese
    • [U-Boot] [PATCH 3/3] musb_udc : Fix compile warning.   Harman Sohanpal
    • [U-Boot] [PATCH v2 0/3] AM335x: Add USB support in u-boot.   Harman Sohanpal
    • [U-Boot] [PATCH v2 2/3] AM335x : Configs to add USB host support.   Harman Sohanpal
    • [U-Boot] [PATCH v2 2/3] AM335x : Configs to add USB host support.   Tom Rini
    • [U-Boot] [PATCH v2 2/3] AM335x : Configs to add USB host support.   Sohanpal, Harman
    • [U-Boot] [PATCH v2 1/3] AM335x : Add USB support for AM335x in u-boot   Harman Sohanpal
    • [U-Boot] [PATCH v2 1/3] AM335x : Add USB support for AM335x in u-boot   Tom Rini
    • [U-Boot] [PATCH v2 1/3] AM335x : Add USB support for AM335x in u-boot   Sohanpal, Harman
    • [U-Boot] [PATCH v2 3/3] musb_udc : Fix compile warning.   Harman Sohanpal
• [U-Boot] Renesas SH7263: SDHI-Files in u-Boot?   Mundinger, Arne (LEN, TTA-DH)
• [U-Boot] [PATCH 1/9] mx6: Allow mx6 to access the IPUv3 registers   Anatolij Gustschin
• [U-Boot] [PATCH 2/9] video: Rename CONFIG_VIDEO_MX5   Anatolij Gustschin
• [U-Boot] [PATCH 3/9] ipu_common: Only apply the erratum to MX51   Anatolij Gustschin
• [U-Boot] [PATCH 4/9] ipu_common: Let clk_ipu_enable/disable only run on MX51 and MX53   Anatolij Gustschin
• [U-Boot] [PATCH 5/9] ipu_common: Rename MXC_CCM_BASE   Anatolij Gustschin
• [U-Boot] [PATCH 6/9] ipu_common: Do not hardcode the ipu_clk frequency   Anatolij Gustschin
• [U-Boot] [PATCH 8/9] ipu_common: Add ldb_clk for use in parenting the pixel clock   Anatolij Gustschin
• [U-Boot] New to u-boot   Rene Kolarik
  • [U-Boot] New to u-boot   Wolfgang Denk
• [U-Boot] TFTP retry count Infinite   Rick Stranberg
  • [U-Boot] TFTP retry count Infinite   Wolfgang Denk
    • [U-Boot] TFTP retry count Infinite   Rick Stranberg
      • [U-Boot] TFTP retry count Infinite   Wolfgang Denk
• [U-Boot] [PATCH V2] omap: am335x_evm: enable i2c1 channel   Steve Sakoman
  • [U-Boot] (no subject)   apple pie
    • [U-Boot] [PATCH] api: net: fix length check in eth_receive()   Michael Walle
    • [U-Boot] [PATCH] api: net: fix length check in eth_receive()   Joe Hershberger
    • [U-Boot] [PATCH] api: net: fix length check in eth_receive()   Michael Walle
• [U-Boot] [PATCH 3/4] c6x: Add suport build davinci SOC with c674x CPUs   Tom Rini
• [U-Boot] [PATCH] mx53loco: use print_cpuinfo() defined in imx-common   Ashok
  • [U-Boot] [PATCH] mx53loco: use print_cpuinfo() defined in imx-common   Fabio Estevam
    • [U-Boot] [PATCH] mx53loco: use print_cpuinfo() defined in imx-common   Ashok
      • [U-Boot] [PATCH v2 0/4] Add support new arch: c6x   Dmitry Bondar
      • [U-Boot] [PATCH v2 0/4] Add support new arch: c6x   Wolfgang Denk
      • [U-Boot] [PATCH v2 0/4] Add support new arch: c6x   bond at inmys.ru
      • [U-Boot] [PATCH v2 0/4] Add support new arch: c6x   Wolfgang Denk
      • [U-Boot] [PATCH v2 1/4] Add support new arch: c6x   Dmitry Bondar
      • [U-Boot] [PATCH v2 2/4] c6x: Add support c674x CPUs   Dmitry Bondar
      • [U-Boot] [PATCH v2 3/4] c6x: Add suport build davinci SOC with c674x CPUs   Dmitry Bondar
      • [U-Boot] [PATCH v2 4/4] c6x: Add support c6745-som board   Dmitry Bondar
• [U-Boot] [PATCH 2/4] mx53loco: add a comment about local copy of print_cpuinfo method   Otavio Salvador
  • [U-Boot] [PATCH 1/4] cmd_bootm: fix compilation warning for assigned but never used variable   Otavio Salvador
  • [U-Boot] [PATCH 2/4] mx53loco: add a comment about local copy of print_cpuinfo method   Otavio Salvador
  • [U-Boot] [PATCH 2/4] mx53loco: add a comment about local copy of print_cpuinfo method   Wolfgang Denk
  • [U-Boot] [PATCH 2/4] mx53loco: add a comment about local copy of print_cpuinfo method   Otavio Salvador
  • [U-Boot] [PATCH 2/4] mx53loco: add a comment about local copy of print_cpuinfo method   Wolfgang Denk
  • [U-Boot] [PATCH 2/4] mx53loco: add a comment about local copy of print_cpuinfo method   Otavio Salvador
  • [U-Boot] [PATCH 2/4] mx53loco: Add a comment about local print_cpuinfo method in board file   Otavio Salvador
  • [U-Boot] [PATCH 2/4] mx53loco: Add a comment about local print_cpuinfo method in board file   Wolfgang Denk
  • [U-Boot] [PATCH 2/4] mx53loco: Add a comment about local print_cpuinfo method in board file   Otavio Salvador
  • [U-Boot] [PATCH 2/4] mx53loco: Add a comment about local print_cpuinfo method in board file   Otavio Salvador
  • [U-Boot] [PATCH 2/4] mx53loco: Add a comment about local print_cpuinfo method in board file   Wolfgang Denk
  • [U-Boot] [PATCH 2/4] mx53loco: Add a comment about local print_cpuinfo method in board file   Otavio Salvador
  • [U-Boot] [PATCH 2/4] mx53loco: Add a comment about local print_cpuinfo method in board file   Wolfgang Denk
  • [U-Boot] [PATCH 2/4] mx53loco: Add a comment about local print_cpuinfo method in board file   Fabio Estevam
  • [U-Boot] [PATCH 3/4] imx: Use a clear identification of an unidentified CPU type   Otavio Salvador
  • [U-Boot] [PATCH 3/4] imx: Use a clear identification of an unidentified CPU type   Wolfgang Denk
  • [U-Boot] [PATCH 3/4] imx: Use a clear identification of an unidentified CPU type   Marek Vasut
  • [U-Boot] [PATCH 3/4] imx: Use a clear identification of an unidentified CPU type   Fabio Estevam
  • [U-Boot] [PATCH 3/4] imx: Use a clear identification of an unidentified CPU type   Marek Vasut
  • [U-Boot] [PATCH 3/4] imx: Use a clear identification of an unidentified CPU type   Wolfgang Denk
  • [U-Boot] [PATCH 3/4] imx: Use a clear identification of an unidentified CPU type   Otavio Salvador
  • [U-Boot] [PATCH 3/4] imx: Use a clear identification of an unidentified CPU type   Marek Vasut
  • [U-Boot] [PATCH 3/4] imx: Use a clear identification of an unidentified CPU type   Otavio Salvador
  • [U-Boot] [PATCH 3/4] imx: Use a clear identification of an unidentified CPU type   Wolfgang Denk
  • [U-Boot] [PATCH 3/4] imx: Use a clear identification of an unidentified CPU type   Otavio Salvador
  • [U-Boot] [PATCH 3/4] imx: Use a clear identification of an unidentified CPU type   Marek Vasut
  • [U-Boot] [PATCH 4/4] mxs: generalize code for print_cpuinfo()   Otavio Salvador
  • [U-Boot] [PATCH 4/4] mxs: generalize code for print_cpuinfo()   Marek Vasut
  • [U-Boot] [PATCH 4/4 v2] mxs: generalize code for print_cpuinfo()   Otavio Salvador
  • [U-Boot] [PATCH 1/4] cmd_bootm: fix compilation warning for assigned but never used variable   Wolfgang Denk
  • [U-Boot] [PATCH 1/4] cmd_bootm: fix compilation warning for assigned but never used variable   Otavio Salvador
• [U-Boot] [PATCH 2/4] mx53loco: add a comment about local copy of print_cpuinfo method   Marek Vasut
• [U-Boot] [PATCH 0/2] Add GPIO driver for BCM2835 SoC   Vikram Narayanan
  • [U-Boot] [PATCH 1/2] bcm: Add GPIO driver for BCM2835 SoC   Vikram Narayanan
    • [U-Boot] [PATCH 1/2] bcm: Add GPIO driver for BCM2835 SoC   Stephen Warren
      • [U-Boot] [PATCH 1/2] bcm: Add GPIO driver for BCM2835 SoC   Vikram Narayanan
      • [U-Boot] [PATCH 1/2] bcm: Add GPIO driver for BCM2835 SoC   Stephen Warren
      • [U-Boot] [PATCH 1/2] bcm: Add GPIO driver for BCM2835 SoC   Vikram Narayanan
      • [U-Boot] [PATCH 1/2] bcm: Add GPIO driver for BCM2835 SoC   Stephen Warren
  • [U-Boot] [PATCH 2/2] rbpi: Add BCM2835 GPIO driver for raspberry pi   Vikram Narayanan
    • [U-Boot] [PATCH 2/2] rbpi: Add BCM2835 GPIO driver for raspberry pi   Stephen Warren
• [U-Boot] problems when large nand flash used   Сергей К.
  • [U-Boot] problems when large nand flash used   Scott Wood
    • [U-Boot] [PATCH v2 2/3] imx: Use a clear identification of an unidentified CPU type   Otavio Salvador
    • [U-Boot] [PATCH v2 3/3] mxs: generalize code for print_cpuinfo()   Otavio Salvador
    • [U-Boot] [PATCH v2 3/3] mxs: generalize code for print_cpuinfo()   Fabio Estevam
    • [U-Boot] [PATCH v2 2/3] imx: Use a clear identification of an unidentified CPU type   Wolfgang Denk
    • [U-Boot] [PATCH v2 2/3] imx: Use a clear identification of an unidentified CPU type   Otavio Salvador
    • [U-Boot] [PATCH 0/9] CACHE: Finishing touches   Marek Vasut
    • [U-Boot] [PATCH 1/9] COMMON: Add __stringify() function   Marek Vasut
    • [U-Boot] [PATCH 2/9] CACHE: Add cache_aligned() macro   Marek Vasut
    • [U-Boot] [PATCH 2/9] CACHE: Add cache_aligned() macro   Scott Wood
    • [U-Boot] [PATCH 2/9] CACHE: Add cache_aligned() macro   Marek Vasut
    • [U-Boot] [PATCH 3/9] CACHE: ext2load: Test if start address is aligned   Marek Vasut
    • [U-Boot] [PATCH 4/9] CACHE: fatload: Test if start address is aligned   Marek Vasut
    • [U-Boot] [PATCH 5/9] CACHE: mmc read/write: Test if start address is aligned   Marek Vasut
    • [U-Boot] [PATCH 6/9] CACHE: nand read/write: Test if start address is aligned   Marek Vasut
    • [U-Boot] [PATCH 6/9] CACHE: nand read/write: Test if start address is aligned   Scott Wood
    • [U-Boot] [PATCH 6/9] CACHE: nand read/write: Test if start address is aligned   Tom Rini
    • [U-Boot] [PATCH 6/9] CACHE: nand read/write: Test if start address is aligned   Scott Wood
    • [U-Boot] [PATCH 6/9] CACHE: nand read/write: Test if start address is aligned   Tom Rini
    • [U-Boot] [PATCH 6/9] CACHE: nand read/write: Test if start address is aligned   Scott Wood
    • [U-Boot] [PATCH 6/9] CACHE: nand read/write: Test if start address is aligned   Tom Rini
    • [U-Boot] [PATCH 6/9] CACHE: nand read/write: Test if start address is aligned   Marek Vasut
    • [U-Boot] [PATCH 6/9] CACHE: nand read/write: Test if start address is aligned   Scott Wood
    • [U-Boot] [PATCH 6/9] CACHE: nand read/write: Test if start address is aligned   Marek Vasut
    • [U-Boot] [PATCH 6/9] CACHE: nand read/write: Test if start address is aligned   Scott Wood
    • [U-Boot] [PATCH 6/9] CACHE: nand read/write: Test if start address is aligned   Marek Vasut
    • [U-Boot] [PATCH 6/9] CACHE: nand read/write: Test if start address is aligned   Marek Vasut
    • [U-Boot] [PATCH 6/9] CACHE: nand read/write: Test if start address is aligned   Scott Wood
    • [U-Boot] [PATCH 6/9] CACHE: nand read/write: Test if start address is aligned   Marek Vasut
    • [U-Boot] [PATCH 6/9] CACHE: nand read/write: Test if start address is aligned   Scott Wood
    • [U-Boot] [PATCH 6/9] CACHE: nand read/write: Test if start address is aligned   Marek Vasut
    • [U-Boot] [PATCH 7/9] CACHE: net: Test if start address is aligned   Marek Vasut
    • [U-Boot] [PATCH 7/9] CACHE: net: Test if start address is aligned   Joe Hershberger
    • [U-Boot] [PATCH 7/9] CACHE: net: Test if start address is aligned   Marek Vasut
    • [U-Boot] [PATCH 8/9] CACHE: net: asix: Fix asix driver to work with data cache on   Marek Vasut
    • [U-Boot] [PATCH 8/9] CACHE: net: asix: Fix asix driver to work with data cache on   Joe Hershberger
    • [U-Boot] [PATCH 8/9] CACHE: net: asix: Fix asix driver to work with data cache on   Marek Vasut
    • [U-Boot] [PATCH 9/9] M28EVK: Enable instruction and data cache   Marek Vasut
• [U-Boot] [PATCH v5 1/1] tegra: usb: Fix device enumeration problem of USB1   Jim Lin
  • [U-Boot] [PATCH v5 1/1] tegra: usb: Fix device enumeration problem of USB1   Stephen Warren
    • [U-Boot] [PATCH v5 1/1] tegra: usb: Fix device enumeration problem of USB1   Marek Vasut
      • [U-Boot] [PATCH v5 1/1] tegra: usb: Fix device enumeration problem of USB1   Tom Warren
      • [U-Boot] [PATCH v5 1/1] tegra: usb: Fix device enumeration problem of USB1   Marek Vasut
  • [U-Boot] [PATCH v5 1/1] tegra: usb: Fix device enumeration problem of USB1   Tom Warren
    • [U-Boot] [PATCH V2 0/4] common/lcd cleanup   Nikita Kiryanov
    • [U-Boot] [PATCH V2 1/4] common lcd: simplify lcd_logo   Nikita Kiryanov
    • [U-Boot] [PATCH V2 2/4] common lcd: simplify lcd_display   Nikita Kiryanov
    • [U-Boot] [PATCH V2 3/4] common lcd: simplify core functions   Nikita Kiryanov
    • [U-Boot] [PATCH V2 3/4] common lcd: simplify core functions   Wolfgang Denk
    • [U-Boot] [PATCH V2 4/4] common lcd: simplify lcd_display_bitmap   Nikita Kiryanov
    • [U-Boot] [PATCH v4 0/9] feature additions and fixes for da850/omap-l138   Prabhakar Lad
    • [U-Boot] [PATCH v4 1/9] da850/omap-l138: Add MMC support for DA850/OMAP-L138   Prabhakar Lad
    • [U-Boot] [PATCH v4 2/9] da850/omap-l138: modifications for Logic PD Rev.3 AM18xx EVM   Prabhakar Lad
    • [U-Boot] [PATCH v4 3/9] da850/omap-l138: Make MMC and NOR support mutually exclusive   Prabhakar Lad
    • [U-Boot] [PATCH v4 4/9] arm, davinci: perform check for initializing global data and serial init   Prabhakar Lad
    • [U-Boot] [PATCH v4 5/9] da850/omap-l138: Define SPI specific configs for SPL only when SPI is used   Prabhakar Lad
    • [U-Boot] [PATCH v4 6/9] da850/omap-l138: Add support to read u-boot image from MMC/SD   Prabhakar Lad
    • [U-Boot] [PATCH v4 7/9] da850/omap-l138: Fix NAND flash timings   Prabhakar Lad
    • [U-Boot] [PATCH v4 8/9] da850/omap-l138: Add support for NAND SPL   Prabhakar Lad
    • [U-Boot] [PATCH v4 9/9] da850/omap-l138: add support for direct NOR boot mode   Prabhakar Lad
    • [U-Boot] [PATCH v4 0/9] feature additions and fixes for da850/omap-l138   Tom Rini
    • [U-Boot] [PATCH v4 0/9] feature additions and fixes for da850/omap-l138   Christian Riesch
• [U-Boot] where is rootfs??   Dawid Partyka - Safe-lock.net
  • [U-Boot] where is rootfs??   David Lanzendörfer
    • [U-Boot] where is rootfs??   Dawid Partyka - Safe-lock.net
• [U-Boot] [PATCH] arm: rmobile: kzm9g: Modify sdram area   Tetsuyuki Kobayashi
• [U-Boot] [RFC][PATCH] net: nfs: extend NFS_TIMEOUT   Tetsuyuki Kobayashi
  • [U-Boot] [RFC][PATCH] net: nfs: extend NFS_TIMEOUT   Wolfgang Denk
    • [U-Boot] [RFC][PATCH] net: nfs: extend NFS_TIMEOUT   Tetsuyuki Kobayashi
      • [U-Boot] [RFC][PATCH] net: nfs: extend NFS_TIMEOUT   Tetsuyuki Kobayashi
      • [U-Boot] [RFC][PATCH] net: nfs: extend NFS_TIMEOUT   Wolfgang Denk
      • [U-Boot] [RFC][PATCH] net: nfs: extend NFS_TIMEOUT   Joe Hershberger
      • [U-Boot] [RFC][PATCH] net: nfs: extend NFS_TIMEOUT   Scott Wood
      • [U-Boot] [RFC][PATCH] net: nfs: extend NFS_TIMEOUT   Joe Hershberger
      • [U-Boot] [RFC][PATCH] net: nfs: extend NFS_TIMEOUT   Tetsuyuki Kobayashi
• [U-Boot] [PATCH] net: bugfix: NetSetTimeout assumes CONFIG_SYS_HZ=1000   Tetsuyuki Kobayashi
• [U-Boot] [PATCH] arm: bugfix: Move vector table before jumping relocated code   Tetsuyuki Kobayashi
  • [U-Boot] [PATCH] arm: bugfix: Move vector table before jumping relocated code   Stephen Warren
    • [U-Boot] [PATCH] arm: bugfix: Move vector table before jumping relocated code   Tetsuyuki Kobayashi
      • [U-Boot] [PATCH] arm: bugfix: Move vector table before jumping relocated code   Stephen Warren
      • [U-Boot] [PATCH] arm: bugfix: Move vector table before jumping relocated code   Tom Rini
      • [U-Boot] [PATCH] arm: bugfix: Move vector table before jumping relocated code   Tetsuyuki Kobayashi
• [U-Boot] [PATCH] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0   Tetsuyuki Kobayashi
  • [U-Boot] [PATCH] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0   Tom Rini
  • [U-Boot] [PATCH] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0   Tetsuyuki Kobayashi
  • [U-Boot] [PATCH v2] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0   Tetsuyuki Kobayashi
  • [U-Boot] [PATCH v2] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0   Tom Rini
  • [U-Boot] [PATCH v2] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0   koba
  • [U-Boot] [PATCH v3] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0   Tetsuyuki Kobayashi
  • [U-Boot] [PATCH v3] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0   Tom Rini
  • [U-Boot] [PATCH] smdk6400: Move smdk6400 board from Makefile to boards.cfg   Zhong Hongbo
• [U-Boot] Powerpc MPC8641D enable debug hush.c   Thies Peter Thiesen
  • [U-Boot] Powerpc MPC8641D enable debug hush.c   Wolfgang Denk
    • [U-Boot] [PATCH] arch-kirkwood: Ethernet port macro returning incorrect address   Luke Lowrey
    • [U-Boot] [PATCH] arch-kirkwood: Ethernet port macro returning incorrect address   Prafulla Wadaskar
• [U-Boot] USB Flash Drive   Mr.Deng
  • [U-Boot] [PATCH v3 0/4] Add support new arch: c6x   Dmitry Bondar
  • [U-Boot] [PATCH v3 0/4] Add support new arch: c6x   Tom Rini
  • [U-Boot] [PATCH v3 0/4] Add support new arch: c6x   Dmitry Bondar
  • [U-Boot] [PATCH v3 0/4] Add support new arch: c6x   Tom Rini
  • [U-Boot] [PATCH v3 1/4] Add support new arch: c6x   Dmitry Bondar
  • [U-Boot] [PATCH v3 1/4] Add support new arch: c6x   Tom Rini
  • [U-Boot] [PATCH v3 1/4] Add support new arch: c6x   bond at inmys.ru
  • [U-Boot] [PATCH v3 1/4] Add support new arch: c6x   Tom Rini
  • [U-Boot] [PATCH v3 1/4] Add support new arch: c6x   Wolfgang Denk
  • [U-Boot] [PATCH v3 2/4] c6x: Add support c674x CPUs   Dmitry Bondar
  • [U-Boot] [PATCH v3 2/4] c6x: Add support c674x CPUs   Tom Rini
  • [U-Boot] [PATCH v3 3/4] c6x: Add suport build davinci SOC with c674x CPUs   Dmitry Bondar
  • [U-Boot] [PATCH v3 3/4] c6x: Add suport build davinci SOC with c674x CPUs   Tom Rini
  • [U-Boot] [PATCH] davinci, c6x: Always use C version of reset code   Tom Rini
  • [U-Boot] [PATCH] davinci, c6x: Always use C version of reset code   Tom Rini
  • [U-Boot] [PATCH v3 4/4] c6x: Add support c6745-som board   Dmitry Bondar
  • [U-Boot] [PATCH v3 4/4] c6x: Add support c6745-som board   Tom Rini
  • [U-Boot] [PATCH 10/11 v3] armv7: Adding cpu specific cache managmenent   mathieu.poirier at linaro.org
  • [U-Boot] [PATCH 11/11 v2] snowball: Adding board specific cache cleanup routine   mathieu.poirier at linaro.org
• [U-Boot] [PATCH] arm: enable unaligned access on ARMv7   Lucas Stach
  • [U-Boot] [PATCH v5 00/13] split tegra20 arm7 code into separate SPL   Allen Martin
  • [U-Boot] [PATCH v5 01/13] tegra20: rename tegra2 -> tegra20   Allen Martin
  • [U-Boot] [PATCH v5 02/13] tegra20: move tegra20 SoC code to arch/arm/cpu/tegra20-common   Allen Martin
  • [U-Boot] [PATCH v5 03/13] tegra20: rename CONFIG_MACH_TEGRA_GENERIC   Allen Martin
  • [U-Boot] [PATCH v5 04/13] tegra20: tec: add tegra20-common-post.h   Allen Martin
  • [U-Boot] [PATCH v5 05/13] tegra20: make board mkdir commands unconditional   Allen Martin
  • [U-Boot] [PATCH v5 06/13] mkconfig: add support for SPL CPU   Allen Martin
  • [U-Boot] [PATCH v5 07/13] ARM: Fix arm720t SPL build   Allen Martin
  • [U-Boot] [PATCH v5 08/13] tegra20: remove timer_init from SPL build   Allen Martin
  • [U-Boot] [PATCH v5 09/13] ARM: add tegra20 support to arm720t   Allen Martin
  • [U-Boot] [PATCH v5 10/13] tegra20: add u-boot-t2.bin target   Allen Martin
  • [U-Boot] [PATCH v5 11/13] tegra20: move SDRAM param save to later in boot   Allen Martin
  • [U-Boot] [PATCH v5 12/13] tegra20: enable SPL for tegra20 boards   Allen Martin
  • [U-Boot] [PATCH v5 13/13] tegra20: Remove armv4t build flags   Allen Martin
  • [U-Boot] [PATCH v5 00/13] split tegra20 arm7 code into separate SPL   Stephen Warren
  • [U-Boot] [PATCH v5 00/13] split tegra20 arm7 code into separate SPL   Allen Martin
  • [U-Boot] [PATCH v5 00/13] split tegra20 arm7 code into separate SPL   Tom Warren
  • [U-Boot] [PATCH v5 00/13] split tegra20 arm7 code into separate SPL   Marek Vasut
  • [U-Boot] [Patch v2 0/2] Add EHCI driver for Atmel SoC   Bo Shen
  • [U-Boot] [Patch v2 2/2] AT91: at91sam9m10g45ek : Enable EHCI instead OHCI   Bo Shen
  • [U-Boot] [Patch v2 2/2] AT91: at91sam9m10g45ek : Enable EHCI instead OHCI   Andreas Bießmann
  • [U-Boot] [Patch v2 2/2] AT91: at91sam9m10g45ek : Enable EHCI instead OHCI   Marek Vasut
  • [U-Boot] [Patch v2 1/2] Atmel : usb : add EHCI driver for Atmel SoC   Bo Shen
  • [U-Boot] [Patch v2 1/2] Atmel : usb : add EHCI driver for Atmel SoC   Marek Vasut
• [U-Boot] [PATCH] arm: rmobile: kzm9g: Adjust hardware setting in lowlevel_init.S   Tetsuyuki Kobayashi
  • [U-Boot] [PATCH] arm: rmobile: kzm9g: Adjust hardware setting in lowlevel_init.S   Albert ARIBAUD
    • [U-Boot] [PATCH] arm: rmobile: kzm9g: Adjust hardware setting in lowlevel_init.S   Tetsuyuki Kobayashi
      • [U-Boot] [PATCH v3 0/3] AM335x: Add USB support in u-boot.   Harman Sohanpal
      • [U-Boot] [PATCH v3 1/3] AM335x : Add USB support for AM335x in u-boot   Harman Sohanpal
      • [U-Boot] [PATCH v3 1/3] AM335x : Add USB support for AM335x in u-boot   Tom Rini
      • [U-Boot] [PATCH v3 1/3] AM335x : Add USB support for AM335x in u-boot   Sohanpal, Harman
      • [U-Boot] [PATCH v3 1/3] AM335x : Add USB support for AM335x in u-boot   Ilya Yanok
      • [U-Boot] [PATCH v3 2/3] AM335x : Configs to add USB host support.   Harman Sohanpal
      • [U-Boot] [PATCH v3 3/3] musb_udc : Fix compile warning.   Harman Sohanpal
• [U-Boot] [PATCH 1/1] USB: EHCI: Initialize multiple USB controllers at once   Jim Lin
  • [U-Boot] [PATCH 1/1] USB: EHCI: Initialize multiple USB controllers at once   Wolfgang Denk
    • [U-Boot] [PATCH 1/6] arm/davinci: fix DDR2/mDDR memory controller initialization for Omap L138   Mikhail Kshevetskiy
    • [U-Boot] [PATCH 2/6] arm/davinci/da850: add uart0 pinmux   Mikhail Kshevetskiy
    • [U-Boot] [PATCH 3/6] serial/ns16550: ns16550 has a different register layout on SOC_DA8XX   Mikhail Kshevetskiy
    • [U-Boot] [PATCH 4/6] mtd/spi/spi_flash: support CMD_READ_ID=0x90 case   Mikhail Kshevetskiy
    • [U-Boot] [PATCH 5/6] mtd/spi: add sst25l driver   Mikhail Kshevetskiy
    • [U-Boot] [PATCH 5/6] mtd/spi: add sst25l driver   Tom Rini
    • [U-Boot] [PATCH 6/6] MMC: u-boot-spl may be compiled without partition support   Mikhail Kshevetskiy
    • [U-Boot] [PATCH V2 0/7] CPSW switch plus SPL net support   Ilya Yanok
    • [U-Boot] [PATCH V2 1/7] cpsw: add driver for cpsw ethernet device   Ilya Yanok
    • [U-Boot] [PATCH V2 2/7] am33xx: CPSW init and definitions   Ilya Yanok
    • [U-Boot] [PATCH V2 3/7] am33xx: pin mux defintions for CPSW switch   Ilya Yanok
    • [U-Boot] [PATCH V2 4/7] am335x_evm: read the on-board EEPROM   Ilya Yanok
    • [U-Boot] [PATCH V2 5/7] am335x_evm: CPSW support   Ilya Yanok
    • [U-Boot] [PATCH V2 6/7] OMAP: networking support for SPL   Ilya Yanok
    • [U-Boot] [PATCH V2 7/7] am335x_evm: enable networking in SPL   Ilya Yanok
    • [U-Boot] [PATCH] Davinci: Utility for MMC boot   Prabhakar Lad
    • [U-Boot] [PATCH] Davinci: Utility for MMC boot   Wolfgang Denk
    • [U-Boot] [PATCH] Davinci: Utility for MMC boot   Lad, Prabhakar
    • [U-Boot] [PATCH] Davinci: Utility for MMC boot   Wolfgang Denk
    • [U-Boot] [PATCH 1/3] KW: Move the memory register definitions into kirkwood.h   Marek Vasut
    • [U-Boot] [PATCH 2/3] KW: Add kw_adjust_dram() weak function   Marek Vasut
    • [U-Boot] [PATCH 2/3] KW: Add kw_adjust_dram() weak function   Prafulla Wadaskar
    • [U-Boot] [PATCH 2/3] KW: Add kw_adjust_dram() weak function   Marek Vasut
    • [U-Boot] [PATCH 2/3] KW: Add kw_adjust_dram() weak function   Prafulla Wadaskar
    • [U-Boot] [PATCH 3/3] Kirkwood: Add support for Ka-Ro TK71   Marek Vasut
    • [U-Boot] [PATCH 3/3] Kirkwood: Add support for Ka-Ro TK71   Prafulla Wadaskar
    • [U-Boot] [PATCH 3/3] Kirkwood: Add support for Ka-Ro TK71   Marek Vasut
    • [U-Boot] [PATCH 3/3] Kirkwood: Add support for Ka-Ro TK71   Prafulla Wadaskar
    • [U-Boot] [PATCH 1/2] KW: Move the memory register definitions into kirkwood.h   Marek Vasut
    • [U-Boot] [PATCH 2/2] Kirkwood: Add support for Ka-Ro TK71   Marek Vasut
    • [U-Boot] [PATCH 2/2 V2] Kirkwood: Add support for Ka-Ro TK71   Marek Vasut
    • [U-Boot] [PATCH 1/2] KW: Move the memory register definitions into kirkwood.h   Gerlando Falauto
    • [U-Boot] [PATCH 1/2] KW: Move the memory register definitions into kirkwood.h   Marek Vasut
    • [U-Boot] [PATCH 1/2] KW: Move the memory register definitions into kirkwood.h   Gerlando Falauto
    • [U-Boot] [PATCH 1/2] KW: Move the memory register definitions into kirkwood.h   Marek Vasut
    • [U-Boot] [PATCH] kirkwood: implement kw_sdram_bs_set()   Gerlando Falauto
    • [U-Boot] [PATCH 1/3] microblaze: remove wrong define CONFIG_SYS_FLASH_PROTECTION   Stephan Linz
    • [U-Boot] [PATCH 1/3] microblaze: remove wrong define CONFIG_SYS_FLASH_PROTECTION   Michal Simek
    • [U-Boot] [PATCH 2/3] microblaze: avoid compile error on systems without cfi flash   Stephan Linz
    • [U-Boot] [PATCH 3/3] microblaze: Enable ubi support   Stephan Linz
• [U-Boot] [PATCH 1/4] net: sh_eth: clean up for the SH7757's code   Shimoda, Yoshihiro
  • [U-Boot] [PATCH 1/4] net: sh_eth: clean up for the SH7757's code   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 2/4] net: sh_eth: add SH_ETH_TYPE_ condition   Shimoda, Yoshihiro
  • [U-Boot] [PATCH 2/4] net: sh_eth: add SH_ETH_TYPE_ condition   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 3/4] net: sh_eth: modify the definitions of regsiter   Shimoda, Yoshihiro
  • [U-Boot] [PATCH 3/4] net: sh_eth: modify the definitions of regsiter   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 4/4] net: sh_eth: add support for SH7757's GETHER   Shimoda, Yoshihiro
  • [U-Boot] [PATCH 4/4] net: sh_eth: add support for SH7757's GETHER   Nobuhiro Iwamatsu
• [U-Boot] [PATCH 1/1] USB: EHCI: Initialize multiple USB controllers at once   Wolfgang Denk
  • [U-Boot] [PATCH 1/1] USB: EHCI: Initialize multiple USB controllers at once   Stephen Warren
• [U-Boot] ARM CONFIG_OF_CONTROL status   Michal Simek
  • [U-Boot] ARM CONFIG_OF_CONTROL status   Simon Glass
    • [U-Boot] ARM CONFIG_OF_CONTROL status   Michal Simek
    • [U-Boot] ARM CONFIG_OF_CONTROL status   Simon Glass
    • [U-Boot] ARM CONFIG_OF_CONTROL status   Michal Simek
    • [U-Boot] ARM CONFIG_OF_CONTROL status   Simon Glass
    • [U-Boot] ARM CONFIG_OF_CONTROL status   Michal Simek
    • [U-Boot] ARM CONFIG_OF_CONTROL status   Simon Glass
    • [U-Boot] ARM CONFIG_OF_CONTROL status   Michal Simek
    • [U-Boot] ARM CONFIG_OF_CONTROL status   Stephan Linz
  • [U-Boot] Is it possible to boot the U-boot from the another U-boot from the flash area   Ishwar Saunshi
    • [U-Boot] Is it possible to boot the U-boot from the another U-boot from the flash area   Wolfgang Denk
      • [U-Boot] Is it possible to boot the U-boot from the another U-boot from the flash area   Ishwar Saunshi
      • [U-Boot] Is it possible to boot the U-boot from the another U-boot from the flash area   Wolfgang Denk
      • [U-Boot] Is it possible to boot the U-boot from the another U-boot from the flash area   Schneider, Kolja
      • [U-Boot] [PATCH] fs/ext2/ext2fs.c: fix warning   Andreas Bießmann
      • [U-Boot] [PATCH] fs/ext2/ext2fs.c: fix warning   Thierry Reding
  • [U-Boot] [PATCH] i.MX28: bug fixes in PMU configuration code   Stathis Voukelatos
• [U-Boot] [PATCH] i.MX28: bug fixes in PMU configuration code   Marek Vasut
• [U-Boot] [PATCH 0/1] fsl_elbc support for 4k devices and factory badblock migration   Rafael Beims
  • [U-Boot] [PATCH] [nand]: Hack to support 4k page in fsl_elbc_nand   Rafael Beims
• [U-Boot] [PATCH] arm: AT91: add at91sam9x5ek board support   Andreas Bießmann
  • [U-Boot] [PATCH] arm: AT91: add at91sam9x5ek board support   Bo Shen
    • [U-Boot] [PATCH] arm: AT91: add at91sam9x5ek board support   Andreas Bießmann
• [U-Boot] MPC8641HPVN saveenv, newstart u-boot stops   Thies Peter Thiesen
• [U-Boot] sha256_crypt for uboot   Richard Retanubun
• [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Marek Vasut
  • [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Ilya Yanok
    • [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Marek Vasut
      • [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Ilya Yanok
      • [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Marek Vasut
      • [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Ilya Yanok
      • [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Marek Vasut
      • [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Tom Rini
      • [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Marek Vasut
      • [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Tom Rini
      • [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Marek Vasut
      • [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Tom Rini
      • [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Marek Vasut
      • [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Tom Rini
      • [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Ilya Yanok
      • [U-Boot] [PATCH v4 3/6] mcx: Disable DCACHE since USB EHCI is enabled   Marek Vasut
    • [U-Boot] U-boot support for versatile express cortex a-15   Kumar Sourav
  • [U-Boot] U-boot support for versatile express cortex a-15   Kumar Sourav
    • [U-Boot] [PATCH] tools/mkenvimage.c: fix basename(3) usage   Andreas Bießmann
• [U-Boot] NAND DMA timed out with i.mx boot source code.   alex
  • [U-Boot] NAND DMA timed out with i.mx boot source code.   Marek Vasut
    • [U-Boot] NAND DMA timed out with i.mx boot source code.   alex
      • [U-Boot] NAND DMA timed out with i.mx boot source code.   Fabio Estevam
      • [U-Boot] NAND DMA timed out with i.mx boot source code.   alex
      • [U-Boot] NAND DMA timed out with i.mx boot source code.   Marek Vasut
• [U-Boot] arm, da850: lcd initialization via spi   Gabriele Filosofi
  • [U-Boot] [PATCH] sh: ap_sh4a_4a: Fix wrong register initialization value   Nobuhiro Iwamatsu
  • [U-Boot] [Patch v3 0/2] Add EHCI driver for Atmel SoC   Bo Shen
  • [U-Boot] [Patch v3 1/2] Atmel : usb : add EHCI driver for Atmel SoC   Bo Shen
  • [U-Boot] [Patch v3 1/2] Atmel : usb : add EHCI driver for Atmel SoC   Andreas Bießmann
  • [U-Boot] [Patch v3 2/2] AT91: at91sam9m10g45ek : Enable EHCI instead OHCI   Bo Shen
  • [U-Boot] [Patch v3 2/2] AT91: at91sam9m10g45ek : Enable EHCI instead OHCI   Andreas Bießmann
  • [U-Boot] [Patch v3 2/2] AT91: at91sam9m10g45ek : Enable EHCI instead OHCI   Bo Shen
  • [U-Boot] [Patch v3 2/2] AT91: at91sam9m10g45ek : Enable EHCI instead OHCI   Bo Shen
  • [U-Boot] [Patch v3 2/2] AT91: at91sam9m10g45ek : Enable EHCI instead OHCI   Andreas Bießmann
  • [U-Boot] [RFC PATCH] net: emaclite: Support OF initialization   Michal Simek
  • [U-Boot] [RESEND Patch v3] Atmel : usb : add EHCI driver for Atmel SoC   Bo Shen
  • [U-Boot] [RESEND Patch v3] Atmel : usb : add EHCI driver for Atmel SoC   Marek Vasut
  • [U-Boot] [RESEND Patch v3] Atmel : usb : add EHCI driver for Atmel SoC   Andreas Bießmann
  • [U-Boot] [RESEND Patch v3] Atmel : usb : add EHCI driver for Atmel SoC   Marek Vasut
  • [U-Boot] [RESEND Patch v3] Atmel : usb : add EHCI driver for Atmel SoC   Andreas Bießmann
• [U-Boot] [PATCH v2] skat91: add support for SK-AT91SAM9/SIM508 board   Andreas Bießmann
• [U-Boot] [PATCH v2] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0   Tetsuyuki Kobayashi
  • [U-Boot] [PATCH v2] arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0   Tetsuyuki Kobayashi
• [U-Boot] [PATCH] Fix: AT91SAM9263 nor flash usage Fix: board doesn't boot from norflash Fix: environment can't write to flash (end address/start address not on sector boundary)   Andreas Bießmann
• [U-Boot] [PATCH] Fix: brocken boot message at serial line on AT91SAM9263-EK board   Andreas Bießmann
  • [U-Boot] [PATCH 1/2] at91sam9263ek: enable useful commands   Andreas Bießmann
  • [U-Boot] [PATCH 2/2] at91sam9263ek: fix 'update' script   Andreas Bießmann
  • [U-Boot] [PATCH] Makefile: change LIB to LIB-y   Daniel Schwierzeck
  • [U-Boot] [PATCH] Makefile: change LIB to LIB-y   Wolfgang Denk
  • [U-Boot] [PATCH 0/3] replace LIBS by LIBS-y and allow appending to it in sub-makefiles   Daniel Schwierzeck
  • [U-Boot] [PATCH] ehci-atmel: fix compiler warning   Andreas Bießmann
• [U-Boot] i.MX6Q SabreLite: Ethernet does not work at Gigabit speed   Wolfgang Grandegger
  • [U-Boot] i.MX6Q SabreLite: Ethernet does not work at Gigabit speed   Eric Nelson
    • [U-Boot] i.MX6Q SabreLite: Ethernet does not work at Gigabit speed   Troy Kisky
      • [U-Boot] [PATCH 1/2] Remove unused CONFIG_STACKSIZE   Rob Herring
      • [U-Boot] [PATCH 2/2] ARM: increase lmb stack space reservation to 4KB   Rob Herring
      • [U-Boot] [PATCH] i2c: deblock i2c bus also if accessed before realocation   Holger Brunck
• [U-Boot] [PATCH v3] ATMEL/PIO: Enable new feature of PIO on Atmel device   Andreas Bießmann
  • [U-Boot] [PATCH] beagle: add eeprom expansion board info for bct brettl4   Peter Meerwald
  • [U-Boot] [PATCH 1/3] Makefile: allow appending to LIB in sub-makefiles   Daniel Schwierzeck
  • [U-Boot] [PATCH 2/3] Makefile: replace LIBS by LIBS-y   Daniel Schwierzeck
  • [U-Boot] [PATCH 3/3] Makefile: cosmetic: optimize usage of LIBS-y   Daniel Schwierzeck
  • [U-Boot] [PATCH V2 1/1] net: phy: micrel: make ksz9021 phy accessible   Troy Kisky
  • [U-Boot] [PATCH 1/5] [PATCH 1/5] Add missing constant to mx27   Philippe Reynes
  • [U-Boot] [PATCH 2/5] [PATCH 2/5] Add support for the armadeus APF27 board   Philippe Reynes
  • [U-Boot] [PATCH 2/5] [PATCH 2/5] Add support for the armadeus APF27 board   Fabio Estevam
  • [U-Boot] [PATCH 2/5] [PATCH 2/5] Add support for the armadeus APF27 board   Eric Jarrige
  • [U-Boot] [PATCH 3/5] [PATCH 3/5] Add nand_spl support for the apf27   Philippe Reynes
  • [U-Boot] [PATCH 3/5] [PATCH 3/5] Add nand_spl support for the apf27   Scott Wood
  • [U-Boot] [PATCH 4/5] [PATCH 4/5] Add FPGA support for the apf27 board   Philippe Reynes
  • [U-Boot] [PATCH 5/5] [PATCH 5/5] Add config file for the apf27   Philippe Reynes
  • [U-Boot] [PATCH v2 0/1] fsl_elbc support for 4k devices and factory badblock migration   Rafael Beims
  • [U-Boot] [PATCH v2] nand: Hack to support 4k page in fsl_elbc_nand   Rafael Beims
    • [U-Boot] [PATCH v2] nand: Hack to support 4k page in fsl_elbc_nand   Scott Wood
      • [U-Boot] [PATCH v2] nand: Hack to support 4k page in fsl_elbc_nand   Rafael Beims
      • [U-Boot] [PATCH v2] nand: Hack to support 4k page in fsl_elbc_nand   Scott Wood
      • [U-Boot] [PATCH] fdt: Include arch specific gpio.h   Michal Simek
      • [U-Boot] [PATCH 1/5] microblaze: Add gpio.h   Michal Simek
      • [U-Boot] [PATCH 2/5] microblaze: Move individual board linker scripts to common script in cpu tree.   Michal Simek
      • [U-Boot] [PATCH 3/5] microblaze: Add support for device tree driven board configuration   Michal Simek
      • [U-Boot] [PATCH 4/5] net: emaclite: Support OF initialization   Michal Simek
      • [U-Boot] [PATCH 5/5] microblaze: Wire up fdt emaclite initialization   Michal Simek
      • [U-Boot] [PATCH 5/5] microblaze: Wire up fdt emaclite initialization   Stephan Linz
      • [U-Boot] [PATCH] powerpc/corenet: fix compile error when CONFIG_SYS_NO_FLASH is defined   Shaohui Xie
      • [U-Boot] [PATCH] powerpc/ddr: fix fsl_ddr_get_dimm_params compile error   Shaohui Xie
      • [U-Boot] [PATCH] powerpc/p2041: configure the CPLD lane_mux according to RCW   Shaohui Xie
• [U-Boot] environment access before relocation does not work on (some) arm   Matthias Fuchs
  • [U-Boot] environment access before relocation does not work on (some) arm   Wolfgang Denk
    • [U-Boot] [PATCH v4 0/3] AM335x: Add USB support in u-boot.   Harman Sohanpal
    • [U-Boot] [PATCH v4 1/3] AM335x : Add USB support for AM335x in u-boot   Harman Sohanpal
    • [U-Boot] [PATCH v4 2/3] AM335x : Configs to add USB support.   Harman Sohanpal
    • [U-Boot] [PATCH v4 3/3] musb_udc : Fix compile warning.   Harman Sohanpal
    • [U-Boot] [PATCH v4 0/3] AM335x: Add USB support in u-boot.   Marek Vasut
    • [U-Boot] [PATCH v4 0/3] AM335x: Add USB support in u-boot.   Marek Vasut
    • [U-Boot] [PATCH v4 0/3] AM335x: Add USB support in u-boot.   Harman Sohanpal
    • [U-Boot] [PATCH 00/10 V3] EXYNOS5: Support for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 01/10 V3] ARCH: SPL: Add parametric board initializer   Rajeshwari Shinde
    • [U-Boot] [PATCH 02/10 V3] SMDK5250: SPL: Define parametric board initializer   Rajeshwari Shinde
    • [U-Boot] [PATCH 03/10 V3] SMDK5250: Add smdk5250-uboot-spl.lds   Rajeshwari Shinde
    • [U-Boot] [PATCH 04/10 V3] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 05/10 V3] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 06/10 V3] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 07/10 V3] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 08/10 V3] EXYNOS5: CLOCK: Add BPLL support   Rajeshwari Shinde
    • [U-Boot] [PATCH 09/10 V3] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 10/10 V3] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH] kw_spi: fix clock prescaler computation   Valentin Longchamp
    • [U-Boot] [PATCH 1/2] igep00x0: default to OMAP-specific serial driver   Javier Martinez Canillas
    • [U-Boot] [PATCH 2/2] igep00x0: default mmcrootfstype to EXT4   Javier Martinez Canillas
    • [U-Boot] [PATCH 00/10 V4] EXYNOS5: Support for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 01/10 V4] ARCH: SPL: Add parametric board initializer   Rajeshwari Shinde
    • [U-Boot] [PATCH 02/10 V4] SMDK5250: SPL: Define parametric board initializer   Rajeshwari Shinde
    • [U-Boot] [PATCH 03/10 V4] SMDK5250: Add smdk5250-uboot-spl.lds   Rajeshwari Shinde
    • [U-Boot] [PATCH 04/10 V4] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 05/10 V4] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 06/10 V4] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 07/10 V4] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 08/10 V4] EXYNOS5: CLOCK: Add BPLL support   Rajeshwari Shinde
    • [U-Boot] [PATCH 09/10 V4] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH 10/10 V4] SMDK5250: Enable UART and MMC for Exynos5250 Rev 1.0   Rajeshwari Shinde
    • [U-Boot] [PATCH] microblaze: add missing undefs for UBI and UBIFS   Stephan Linz
• [U-Boot] [PATCH v4 0/3] AM335x: Add USB support in u-boot.   Marek Vasut
  • [U-Boot] [PATCH v4 0/3] AM335x: Add USB support in u-boot.   Harman Sohanpal
• [U-Boot] [PATCH v4 0/3] AM335x: Add USB support in u-boot.   Marek Vasut
• [U-Boot] [PATCH v4] at91: Add support for Bluewater Systems Snapper 9G45 module   Andreas Bießmann
  • [U-Boot] [PATCH v2 1/2] imx: Use a clear identification of an unidentified CPU type   Otavio Salvador
  • [U-Boot] [PATCH v3 2/2] mxs: generalize code for print_cpuinfo()   Otavio Salvador

Last message date: Sat Jun 30 21:28:19 CEST 2012
Archived on: Sat Jun 30 21:28:24 CEST 2012

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...